Radio Control Trucks, Cars, Helicopters, Planes, Boats and more! 1000's of Parts and Accessories at Hobby People!

Call Toll Free 1-800-854-8471  

Thursday, November 20, 2008  

Welcome to Hobby People - Your Trusted Source for Radio Control Cars, RC Trucks, RC Helicopters, RC Planes, RC Boats and More.
Since 1972 your satisfaction has been our number one priority! We proudly offer the finest names in Radio Control at the best prices around! 

  Search Help      Your Recent Product Views

XTM

XTM X-Crawler EP Super Class Assembled No Electrics

Your satisfaction is guaranteed on every XTMCAR item that we sell!
All 1/10 and Larger Electric R/C Trucks/Buggies  
Best Selling Items of This Type  
Useful links - XTM<BR> X-Crawler EP Super Class Assembled No Electrics
All XTM Products
Replacement Parts for XTM X-Crawler EP Super Class Assembled No Electrics Product Instruction Manual for XTM X-Crawler EP Super Class Assembled No Electrics

HP ITEM NUMBER:
145632
DESCRIPTION:
XTM X-Crawler EP Super Class Assembled No Electrics
MFR. NUMBER:
A6001

Our 5 star customer service reps are here for you!
Our 5 star customer service reps are here for you!

Since 1972 Your satisfaction has been our number 1 priority!

XTM X-Crawler EP Super Class Assembled No Electrics - Item No. 145632

MORE INFORMATION   ACCESSORY ITEMS

   

XTM X-Crawler EP Super Class Assembled No Electrics

The XTM Super Class X-Crawler navigates just about any terrain - rocks, logs, and other off-roaders :-)

Put your 55-turn motors on each axle and the 90.5:1 final drive ratio will allow you to climb over just about anything!

Specifications:
Length: 22.25" (565mm)
Wheelbase: 15.55" (395mm)
Width (F/R): 15.15" (385mm)
Weight: 9.7 lbs (5.4 kg) approx

Requires radio, 2 servos, 2 motors, 1 or 2 ESC's, batteries and matching charger, and paint.

Body comes clear and must be painted. Decals are included.

Final assembly required.
BUY NOW

Only $439.99
On Order
Instant Shipping Reward!

We can notify you when this item is back in stock via e-mail! Type your address below.




Your email address will only be used for this purpose. It will not be added to our mailing list.

Recommended Accessory Items
Not all items may be necessary and experienced modelers may already have some of these items.
   Order No.  Mfr. No.  Description M.O. Stock Order Price 
474380 94780M Airtronics 94780M MG Digital High-Power Servo Z-Conn On Order
$124.99
751712 RDSCRAWL2RX Airtronics RDS8000 2.4G Crawler w/1-Tx/2-Rx only On Order
$309.99
$229.99
233854 HE6N3300SCLT Hi-Energy 6 cell 3300mAh NiMH Tam Conn In Stock
$31.99
182282 I2S1P480020C Impulse 7.4V 4800mAh 20C LiPo Battery Lithium Polymer In Stock
$107.99
551729 1841 Novak Rooster Crawler Edition ESC In Stock
$93.99
551504 3019 Novak Goat Crawler Brushless System In Stock
$216.99
551562 3555 Novak Fifty-Five Crawler Brush Motor-55T In Stock
$31.99
233135 03203 Pro Max Tamiya Style Plug Set - Wired Set Male/Female In Stock
$3.49
158334 IP1506-USA ProPeak Delta 3 AC/DC Fast 4-8 NiMH/CD Charger 2/3.5/5.0A In Stock
$44.99
158374 O-IP2801 ProPeak Prodigy II 1-14 Cell/1-5 LiPo DC Charger Limited Stock
$74.99
$59.99
841321 TRI20218 Trinity 7.4v 4500mah Li-Po Racing Pack Lithium Polymer In Stock
$89.99

More Information About the X-Crawler EP Super Class Assembled No Electrics
Features:
  • Super Class Size, Almost Ready-to-Run
  • Machined Aluminum Gear Boxes and Axle Carriers
  • Ball Bearing-Supported Steel Drive Train
  • Machined Aluminum Steering Knuckles
  • Machined Aluminum Bead Lock Wheels
  • Adjustable Heavy-Duty Metal Steering and Suspension Links
  • Machined Aluminum Shock Mounts
  • Threaded Aluminum Oil-Filled Shocks
  • Clear Gear Covers
  • Machined Aluminum Servo Mounts
  • Aggressive Molded Rubber Tires with Inserts
  • Designed for Dual Motors and Servos for Precise Maneuvers
  • Steel Hex Screws Throughout
  • Extensive Parts Support and Support Forum


    • Items Needed:
    We recommend downloading the manual to see exactly what setup options are available. You have several choices:

    First is the servos:
    We recommend very high torque servos. Airtronics 94780M (#474380) servos are priced at or below other 300 oz-in servos, but this servo produces over 400 oz-in of torque. On truly rough terrain, this extra power does make a difference.
    If you prefer to have as much power as you can get, but in a lower-cost servo, consider the Airtronics 94162Z (#474142). This servo produces the most torque in its class (144 oz in) and is priced under 40 dollars.
    Airtronics "Z" connectors plug into most standard receivers including JR, Hitec and Futaba.

    Next is the motors/ESC's:
    We recommend motors designed for rock crawling because they have the required torque. You will need a matching ESC for each motor.
    1. For economical brushed motors, we recommend the Novak Rooster Crawler ESC/Motor combination (#551727) These are brushed motors.
    2. For ultimate power, we recommend the Novak GOAT brushless motor and ESC combination (#551504)

    Either way, you will need 2 each (the X-Crawler uses 2 motors and 2 ESC's).

    Battery power:

    Most people choose sub-C size batteries because they are more affordable and heavier than Li-Po, and the extra weight seems to work better for crawling. We recommend the Hi-Energy 6-cell 3300mAh or 4500mAh battery pack. (#233854 or #233856).

    Radio:
    A simple 2-channel radio works fine. You will need 1 Y-Harness (#443930) to connect the ESC's and 1 Y-Harness with servo reversing (#444730) to connect the servos. The servos need to work opposite of each other, thus the Y-Harness with servo reversing or 1 servo that works normally and 1 servo that works in reverse direction is needed (these are not common).

    If you'd like to control the motors independently ("dig" function) and/or control the steering independently, you'll need a 4-channel radio with mixing. The Airtronics RDS8000 Crawler Edition has been made for this purpose. (#751712). You can operate the truck normally, then the mixing switch allows you to chnage to independent front and rear motor and steering control. The mixing is programmable, so you can easily change the setup yourself.

    If you use RDS8000 Crawler radio, you do not need the Y-Harnesses as described above for a 2-Channel radio.

    Note about ESC and motors:
    The wiring of ESCs and motors greatly affects performance.

    Wiring 2 motors in series (where one lead connects the "+" on one motor to the "-" on the other motor) to one ESC will cause the motors to operate at 1/2 the RPMs, but have the same amps rating as a single motor.

    WARNING!!! If wired in parallel (each motor wired directly to one speed control), the amps will double, but the RPMs will be the same as for a single motor. It is crucial that an ESC that is high-power ESC is used, otherwise it will not handle the power needed for both motors and this will cause it to fail!!!

    If you choose to use an ESC for each motor, power them up separately and perform individual setups.




    Original Replacement Parts
       Order No.  Mfr No.  Description Status Cart Price 
    146865 X645 XTM Tire - X-Crawler 2 Pcs In Stock
    		$26.99
    146866 X646 XTM Wheel Rim - X-Crawler 1 Pc In Stock
    		$32.99
    146867 X647 XTM Wheel Bead Lock Rings - X-Crawler 2 Pcs In Stock
    		$15.99
    146882 X662 XTM Wheel - X-Crawler Complete (1 Pc) In Stock
    		$54.99
    146883 X663 XTM Wheel - X-Crawler Complete (2 Pcs) In Stock
    		$99.99
    146886 X085 XTM 3x3mm Grub Screw - X-Crawler 10 Pcs In Stock
    		$3.49
    146820 X600 XTM Chassis Side Plates - X-Crawler (2 Pcs) In Stock
    		$21.99
    146821 X601 XTM Chassis Bottom Plate - X-Crawler 1 Pc In Stock
    		$7.99
    146822 X602 XTM Chassis Upper Plate - X-Crawler 1 Pc In Stock
    		$7.99
    146823 X603 XTM Chassis And Shock Support Rod - X-Crawler 2 Pcs In Stock
    		$6.99
    146824 X604 XTM Side Plate Spacer Rod - X-Crawler 2 Pcs On Order
    		$6.99
    146825 X605 XTM Linkage Rod - X-Crawler 2 Pcs In Stock
    		$10.99
    146826 X606 XTM Ball End - X-Crawler 2 Pcs On Order
    		$9.99
    146827 X607 XTM Ball For Shock Ends - X-Crawler 4 Pcs In Stock
    		$3.99
    146828 X608 XTM Shock Holder - X-Crawler 2 Pcs On Order
    		$13.99
    146829 X609 XTM Linkage Rod Set - X-Crawler 1 Pc In Stock
    		$13.99
    146830 X610 XTM Linkage Rod/Shock Support Set - X-Crawler 1 Pc In Stock
    		$23.99
    146831 X611 XTM Body Posts - X-Crawler 2 Pcs In Stock
    		$8.99
    146832 X612 XTM Body Clips - X-Crawler "B" 4 Pcs In Stock
    		$2.99
    146833 X613 XTM Shock - X-Crawler Complete (1 Pc) On Order
    		$12.99
    146834 X614 XTM Shock Sleeve - X-Crawler 6 Pcs In Stock
    		$3.99
    146835 X615 XTM Antenna Holder - X-Crawler 1 Pc In Stock
    		$2.99
    146836 X616 XTM Triangle Washer - X-Crawler 4 Pcs In Stock
    		$2.99
    146837 X617 XTM Gearbox Housing - X-Crawler 1 Pc In Stock
    		$34.99
    146838 X618 XTM Gearbox Cover - X-Crawler Left 1 Pc In Stock
    		$12.99
    146839 X619 XTM Gearbox Cover - X-Crawler Right 1 Pc In Stock
    		$12.99
    146840 X620 XTM Gear 40T - X-Crawler 1 Pc On Order
    		$12.99
    146841 X621 XTM Gear 8T/34T - X-Crawler 1 Pc On Order
    		$15.99
    146842 X622 XTM Pinion Gear 8T - X-Crawler 1 Pc On Order
    		$3.99
    146843 X623 XTM Axle Tube - X-Crawler Left 1 Pc In Stock
    		$34.99
    146844 X624 XTM Axle Tube - X-Crawler Right 1 Pc In Stock
    		$34.99
    146845 X625 XTM Ball Bearing - X-Crawler (3x10x4mm) 4 Pcs In Stock
    		$7.99
    146846 X626 XTM Bushing A - X-Crawler 2 Pcs (3x4x5mm) In Stock
    		$2.99
    146847 X627 XTM Bushing B - X-Crawler 2 Pcs (3x4x1mm) In Stock
    		$2.99
    146848 X628 XTM Drive Shaft - X-Crawler 1 Pc On Order
    		$10.99
    146849 X629 XTM Gear Pin - X-Crawler (3x23.5mm) 2 Pcs In Stock
    		$3.99
    146850 X630 XTM Ball Bearing - X-Crawler (6x12x4mm) 4 Pcs In Stock
    		$7.99
    146851 X631 XTM Wheel Drive Axle - X-Crawler 1 Pc On Order
    		$5.99
    146852 X632 XTM Ball Bearing - X-Crawler (6x12x4mm) 4 Pcs In Stock
    		$2.99
    146853 X633 XTM Servo Mount - X-Crawler 2 Pcs On Order
    		$9.99
    146854 X634 XTM Knuckle - X-Crawler 1 Pc In Stock
    		$8.99
    146855 X635 XTM Knuckle Arm - X-Crawler 1 Pc In Stock
    		$5.99
    146856 X636 XTM Steering Rod W/1 Pc Ball End - X-Crawler In Stock
    		$10.99
    146857 X637 XTM Servo Rod W/1 Pc Ball End - X-Crawler In Stock
    		$9.99
    146858 X638 XTM Adjustable Rod - X-Crawler 2 Pcs In Stock
    		$3.99
    146859 X639 XTM Flanged Ball Bearing - X-Crawler (4x9x4mm) 4 Pcs In Stock
    		$12.99

    Love Deals? Get our e-mail specials in your in box! Sign up and be the first to receive exclusive discounts, coupons and promotions!
      
     

    Ordering

    Fraud Protection
    Ordering Questions
    Ordering Method
    Payment Options
    Sales Tax
    Secure On-Line Ordering
    Our Store Locations

    Customer Service

    Customer Service
    Policies
    Prop 65
    Satisfaction Guarantee
    General Hobby Questions
    .
    .

    Shipping

    Rates & Policies
    Tracking Packages
    Hazardous Materials
    Returning Merchandise
    .
    .
    .

    Other Help Topics

    About Hobby People
    Site Map
    Our Address
    Our Privacy Policy
    Hobby People Mailbag
    Search System
    .

    Now Proudly Accepting American Express
    		  Search Help      Your Recent Product Views  

    Want to Order by Phone? Call 1-800-854-8471 | Foreign Phone Orders - 714-963-9881

    Serving you since 1972!
    © Copyright Hobby People