A LOT OF PROGRAMMING IN A SMALL PACKAGE
Novak has packed the Havoc Pro Brushless ESC full of programmability into one easy-to-adjust profile. The Havoc Pro includes a customizable Throttle Curve, which smoothes out throttle operation. In addition, the Havoc Pro’s Brake Frequency adjustment contains seven degrees of adjustability from a smooth and controllable brake to a more abrupt and grabbier feel. The dozens of adjustments allow drivers to fine-tune their vehicle’s throttle braking for better control and advanced handling.
But the customization doesn’t end with braking. Novak has also built into the ESC Li-Po Cut-Off Circuitry that prevents the batteries from going below the critical safety voltage level, and a Motor Rotation feature that allows the user to easily select the
direction of the motor.
MOTOR COMPATIBILITY
The Havoc Pro ESC is compatible with all Novak brushless motors and any ROAR-approved 540-sized sensored motor, all the way down to 3.5-turns.
HAVOC PRO BRUSHLESS ESC FEATURES
- Nine adjustable parameters: Minimum Brake (10 settings from 3-50%), Drag Brake (10 settings from 3-50%), Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 2-12%), Throttle Curve (Linear, Expo-1 and Expo-2), Brake Frequency (7 settings from 1-8 kHz), Reverse, Motor Rotation and Li-Po Cut-Off
- Fifty percent more transistors than the Havoc 2S ESC for faster speeds, higher efficiency and increased load handling
- One-Touch Set-Up for quick, easy transmitter setup
- Locked Rotor Detection and Thermal Overload Protection (when used with a Novak sensored brushless motor)
- Novak’s Radio-Priority and Polar Drive Circuits
- Included 30x30x6mm ESC clear cooling fan (#5648) mounted on factory-installed heat sink
- Meets RoHS compliance and includes 120-Day Warranty
- Designed, assembled and tested by Novak in Irvine, Calif., using globally sourced components
HAVOC PRO BRUSHLESS ESC SPECS
- Input Voltage: 2S Li-Po cells or 4-6 NiMH cells (1.2V/cell)
- ESC Footprint: 1.16” x 1.49” (29.5 x 37.8 mm)
- Weight (without wires): 1.36 oz. (38.5 g)
- Design: Sensor-based
- Motor Limit (brushless): All 3.5-turn Novak 540-size sensored brushless motors
- On-Resistance (brushless): 0.00040 ohms @ 25°C trans. temp.
- BEC: 6.0 volts DC / 3.0 amps
- Rated Current: 540 Amps @ 25°C trans. temp.
- Braking Current: 540 Amps @ 25°C trans. temp.
- Status LEDs: 4
- Voltage Cut-Off: 6.25V (when Li-Poly Cut-Off Circuitry is enabled)
|
