ESC Features:
2 specifically designed crawling driving profiles which feature Zero Reverse Delay, and high-powered Drag Brakes (or “Hill” or “Hold” brakes)
Built-in Li-Poly Cutoff Protection (Profile 2)
Water-Resistant Case
Heavy-Duty 6 Volt / 5 Amp BEC
Direct-Solder Wiring Tabs
User Replaceable Input Harness
Novak’s One-Touch Set-Up™
Built-in Power Output for Optional 6V Accessory Fan (#5648)
Novak’s Radio-Priority Circuitry™
Novak’s Polar Drive Circuitry™
Thermal Overload Protection
ESC Specs:
Forward and Reverse
Input Voltage: 4-7 Ni-Cd/Ni-MH cells (1.2V/cell) or 2 Li-Poly cells
Footprint: 1.54" x 1.18" (39 x 30 mm)
Weight: 2.66 oz. (75.5 g) w/wires; 1.57 oz. (44.5 g) w/o wires
Motor Limit: 12-turn brushed (at 6 cells Ni-MH)
On-Resistance: 0.0014 ohms (forward); 0.0028 ohms (reverse)*
Rated Current: 400 amps* (forward)
Braking Current: 200 amps*
BEC: 6.0 volt/5.0 amp
Motor Limit 27-turn brushed (at 6 cells Ni-MH)
Discrete Steps: 256 Forward; 256 Reverse
Battery Plug: Tamiya
Motor Plug: Bullet connectors
Drive Profiles: 2
Status LEDs: 2
Voltage Cut-off: 6.25 volts (Li-Poly Profiles)
*Mosfet rating at 25 degree C junction temperature
Besides a different case label, the Rooster Crawler looks the same as the Rooster 12T. Same small footprint, same heat sink assembly, and same 14-gauge power wires on PCB-direct solder tabs for easy soldering. Inside the orange case, however, is where crawler-specific software transforms the Rooster into a Crawler. The special software enables crawler applications to scale, navigate, and conquer the most challenging terrain.
Other Rooster Crawler features include a water-resistant case, a user-replaceable input harness, and auxiliary fan connectors. Of course, all the standard features for which Novak is known are also included: One-Touch Set-Up™, Radio-Priority Circuitry™, Polar Drive Circuitry™, and Thermal Overload Protection.
|
