You have no items in your shopping cart.
Associated AE .15X Pull Start Engine - Universal Crankshaft
The Team Associated .12 and .15 pull start engines are ABC engines, having an Aluminum piston with a Brass sleeve, Chrome plated. They have TRUE 90 porting. If you've ever looked into the exhaust ports of some other engines, you've noticed that the exhaust port in the sleeve is not lined up with the exhaust port in the crankcase. It's cheaper to manufacture that way, but it also cuts down on horsepower. In Associated's engine's exhaust port, the sleeve lines up perfectly with the exhaust port in the crankcase. The 90 porting enables the intake ports to be correctly aligned for better air flow, too. All this means more horsepower to you.
Engine comes with two different threaded studs to achieve the crankshaft type needed (standard and for RC10GT) Aluminum piston and chrome-plated brass sleeve Machined 7075 aluminum connecting rod All ports are in optimum alignment for max power and efficiency Rotary type carburetor
Weight: 8.642oz (245g)
Crankshaft size at threads: 0.196" (5mm)
Distance between mounting holes same side: 0.43" (11mm)
Distance between mounting holes opposite side: 1.23" (31.4mm)
Distance/top of cyl.head to bottom of mounting flange: 2.71" (69.0mm)
Distance between muffler mounting holes: 1.1" (28.2mm)
Height/bottom of crankcase to top of cylinder head: 3.21" (81.5mm)
Width including mounting flanges: 1.53" (38mm)
Width of crankcase beneath mounting flanges: 0.98" (24.8mm)