This Airtronics AC Dual Charger is specifically designed to charge 8 cell Ni-Cd or Ni-MH transmitter battery packs and 4 ~ 5 cell Ni-Cd or Ni-MH receiver battery packs. Each output charges at 75mA to safely recharge your transmitter and receiver batteries overnight.

This is an Airtronics 6 Cell 7.2 Volt 2200mAh Ni-MH battery pack for the Airtronics SD-10G transmitter. This is a direct replacement for the stock battery that comes preinstalled in the SD-10G.

This Airtronics AC Dual Charger is specifically designed to charge 4 to 6 cell Ni-Cd or Ni-MH transmitter battery packs and 4 ~ 5 cell Ni-Cd or Ni-MH receiver battery packs. Each output charges at 150mA to safely recharge your transmitter and receiver batteries overnight.

This is an Airtronics 6 Cell 7.2 Volt 2200mAh Ni-MH battery pack for the Airtronics M11X and MX-3X transmitter. This Ni-MH battery pack is a direct replacement for the stock battery pack preinstalled in the M11X and can be used in place of the 'AA' Alkaline batteries that power the MX-3X transmitter in the stock configuration. Using this battery pack is more convenient and more cost effective in the long run than using Alkaline batteries.

This is an Airtronics Dry Cell Receiver Battery Holder with Switch Harness. This battery holder is typically used to power the receiver in nitro cars and boats, but can be used to power any receiver with a Nominal Input Voltage Rating of 4.8 volts. Compatible with 4 'AA' Alkaline, Ni-Cd or Ni-MH cells (not included).

This is an Airtronics Dry Cell Receiver Battery Holder with BEC Connector. This battery holder is typically used to power the receiver in nitro cars and boats, but can be used to power any receiver with a Nominal Input Voltage Rating of 4.8 volts. Compatible with 4 'AA' Alkaline, Ni-Cd or Ni-MH cells (not included).