Radio Control Hobbies and More!


Batteries

Hobby People strives to bring you a selection of batteries for all RC applications. Receiver packs, transmitter packs, batteries for cars, planes, and more! NiMH, Li-PO, whatever you need. Shop here first for your batteries and chargers, because what good is an electric vehicle without a battery?

Items 1 to 10 of 11 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Ascending Direction
  1. Airtronics Dual Charger 110vac 75ma w/Z connector

    Airtronics Dual Charger 110vac 75ma w/Z connector

    No. 475036

    $27.99

    Out of stock

    This Airtronics AC Dual Charger is specifically designed to charge 8 cell Ni-Cd or Ni-MH transmitter battery packs and 4 ~ 5 cell Ni-Cd or Ni-MH receiver battery packs. Each output charges at 75mA to safely recharge your transmitter and receiver batteries overnight.

    Learn More
  2. Airtronics Dual Charger - 4-6 Cell Only AC (M11X/MX-3X/SDs/Aq)

    Airtronics Dual Charger - 4-6 Cell Only AC (M11X/MX-3X/SDs/Aq)

    No. 475034

    $19.99

    This Airtronics AC Dual Charger is specifically designed to charge 4 to 6 cell Ni-Cd or Ni-MH transmitter battery packs and 4 ~ 5 cell Ni-Cd or Ni-MH receiver battery packs. Each output charges at 150mA to safely recharge your transmitter and receiver batteries overnight.

    Learn More
  3. Airtronics Transmitter Battery - SD-10G 2200mah 7.2v NiMH

    Airtronics Transmitter Battery - SD-10G 2200mah 7.2v NiMH

    No. 475025

    $17.99

    This is an Airtronics 6 Cell 7.2 Volt 2200mAh Ni-MH battery pack for the Airtronics SD-10G transmitter. This is a direct replacement for the stock battery that comes preinstalled in the SD-10G.

    Learn More
  4. Airtronics Battery Holder - MT-4, M12, 3X (4-cell Dry) Z-Conn

    Airtronics Battery Holder - MT-4, M12, 3X (4-cell Dry) Z-Conn

    No. 475056

    $8.99

    This is a replacement Airtronics Dry Cell Battery Holder for MT-4, M12 and MX-3X transmitters. Battery holder holds four 'AA' batteries. Features Z-Connector with universal positive/negative wiring configuration.

    Learn More
  5. Airtronics Battery Holder - MX-3X 4-Cell Dry
  6. Airtronics Battery Holder - MX-3/S/M11 8-Cell Dry
  7. Airtronics Battery Holder - 4-Cell w/Switch Harness

    Airtronics Battery Holder - 4-Cell w/Switch Harness

    No. 475045

    $6.99

    Out of stock

    This is an Airtronics Dry Cell Receiver Battery Holder with Switch Harness. This battery holder is typically used to power the receiver in nitro cars and boats, but can be used to power any receiver with a Nominal Input Voltage Rating of 4.8 volts. Compatible with 4 'AA' Alkaline, Ni-Cd or Ni-MH cells (not included).

    Learn More
  8. Airtronics Battery Holder - 4-Cell w/BEC Plug

    Airtronics Battery Holder - 4-Cell w/BEC Plug

    No. 475044

    $5.99

    This is an Airtronics Dry Cell Receiver Battery Holder with BEC Connector. This battery holder is typically used to power the receiver in nitro cars and boats, but can be used to power any receiver with a Nominal Input Voltage Rating of 4.8 volts. Compatible with 4 'AA' Alkaline, Ni-Cd or Ni-MH cells (not included).

    Learn More
  9. Airtronics Battery Holder - 4-Cell w/Z Connector

    Airtronics Battery Holder - 4-Cell w/Z Connector

    No. 475043

    $4.99

    This is an Airtronics Dry Cell Receiver Battery Holder with 'Z' Connector. This battery holder is typically used to power the receiver in nitro cars and boats, but can be used to power any receiver with a Nominal Input Voltage Rating of 4.8 volts. Compatible with 4 'AA' Alkaline, Ni-Cd or Ni-MH cells (not included).

    Learn More
  10. Airtronics Battery Holder - SD-10G/S

    Airtronics Battery Holder - SD-10G/S

    No. 496477

    $3.29

    Battery Holder - SD-10G Learn More

Items 1 to 10 of 11 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Ascending Direction