Radio Control Hobbies and More!


Batteries

9 Item(s)

per page

List  Grid 

Set Ascending Direction
  1. Airtronics Transmitter Battery - Aquila, M11X, MX3X 2200mah 7.2v Ni

    Airtronics Transmitter Battery - Aquila, M11X, MX3X 2200mah 7.2v Ni

    No. 475024

    $19.99

    Out of stock

    This is an Airtronics 6 Cell 7.2 Volt 2200mAh Ni-MH battery pack for the Airtronics M11X and MX-3X transmitter. This Ni-MH battery pack is a direct replacement for the stock battery pack preinstalled in the M11X and can be used in place of the 'AA' Alkaline batteries that power the MX-3X transmitter in the stock configuration. Using this battery pack is more convenient and more cost effective in the long run than using Alkaline batteries.

    Learn More
  2. Airtronics Transmitter Battery - SD-10G 2200mah 7.2v NiMH

    Airtronics Transmitter Battery - SD-10G 2200mah 7.2v NiMH

    No. 475025

    $19.99

    This is an Airtronics 6 Cell 7.2 Volt 2200mAh Ni-MH battery pack for the Airtronics SD-10G transmitter. This is a direct replacement for the stock battery that comes preinstalled in the SD-10G.

    Learn More
  3. Airtronics Battery Holder - MT-4, M12, 3X (4-cell Dry) Z-Conn

    Airtronics Battery Holder - MT-4, M12, 3X (4-cell Dry) Z-Conn

    No. 475056

    $8.99

    This is a replacement Airtronics Dry Cell Battery Holder for MT-4, M12 and MX-3X transmitters. Battery holder holds four 'AA' batteries. Features Z-Connector with universal positive/negative wiring configuration.

    Learn More
  4. Airtronics Battery Holder - MX-3X 4-Cell Dry
  5. Airtronics Battery Holder - MX-3/S/M11 8-Cell Dry
  6. Airtronics Battery Holder - 4-Cell w/Switch Harness

    Airtronics Battery Holder - 4-Cell w/Switch Harness

    No. 475045

    $6.99

    This is an Airtronics Dry Cell Receiver Battery Holder with Switch Harness. This battery holder is typically used to power the receiver in nitro cars and boats, but can be used to power any receiver with a Nominal Input Voltage Rating of 4.8 volts. Compatible with 4 'AA' Alkaline, Ni-Cd or Ni-MH cells (not included).

    Learn More
  7. Airtronics Battery Holder - 4-Cell w/BEC Plug

    Airtronics Battery Holder - 4-Cell w/BEC Plug

    No. 475044

    $5.99

    This is an Airtronics Dry Cell Receiver Battery Holder with BEC Connector. This battery holder is typically used to power the receiver in nitro cars and boats, but can be used to power any receiver with a Nominal Input Voltage Rating of 4.8 volts. Compatible with 4 'AA' Alkaline, Ni-Cd or Ni-MH cells (not included).

    Learn More
  8. Airtronics Battery Holder - 4-Cell w/Z Connector

    Airtronics Battery Holder - 4-Cell w/Z Connector

    No. 475043

    $4.99

    This is an Airtronics Dry Cell Receiver Battery Holder with 'Z' Connector. This battery holder is typically used to power the receiver in nitro cars and boats, but can be used to power any receiver with a Nominal Input Voltage Rating of 4.8 volts. Compatible with 4 'AA' Alkaline, Ni-Cd or Ni-MH cells (not included).

    Learn More
  9. Airtronics Battery Holder - SD-10G/S

    Airtronics Battery Holder - SD-10G/S

    No. 496477

    $3.29

    Battery Holder - SD-10G Learn More

9 Item(s)

per page

List  Grid 

Set Ascending Direction