Novak GTB 2 Racing Brushless ESC w/X-Drive

This is a Novak GTB 2 Racing Brushless ESC w/X-Drive. Novak X-Drive has arrived in a major way, and is taking the racing world by storm! This new technology has now been added to the tried-and-true GTB 2 platform, and is here to stay. Novak-developed X-Drive is the newest motor-firing technology. This revolutionary firmware and hardware delivers unmatched performance and provides: unparalleled throttle response, smooth and controlled braking, cooler operating temperatures, faster lap times and more power for nearly all applications. Customers and team drivers who have used X-Drive in side-by-side comparisons report a noticeable performance advantage. This update not only makes your speed control more efficient, it may very well make you faster and put you on the podium!

Features:

• Designed Specifically for all Forms of 1:10th Scale Racing

• Sensor-Based ESC for Excellent Torque and Low-Speed Driveability

• Nine Adjustable Parameters to Maximize Performance on the Track

• Minimum Brake (10 Settings)

• Drag Brake (10 Settings)

• Minimum Drive (10 Settings)

• Dead Band (5 Settings)

• Throttle Curve (Linear/Expo)

• Brake Curve (Linear/Expo)

• Brake Frequency (10 Settings)

• Brake End-Point (10 Settings)

• Drive Frequency (10 Settings)

• Interface Also Reatures Reverse Disable and Motor Rotation

• Novak X-Drive, Dynamic Timing Advance and NovaBrakes

• One-Touch Set-Up Allows Quick and Easy Transmitter Set-Up

• Designed to Meet ROAR Sportsman Class Racing Specifications

• Highly Water-Resistant ESC Case with Protective Silicone Gasket Seal

• Robust 3-Amp True-Spec BEC

• Built-In Voltage Cut-Off Circuitry Prevents Damage to LiPo/LiFe Batteries

• On-Board Diagnostic Temperature Monitoring Let's You Quickly Check the ESC's Temperature

• Thermal Overload Protection Circuitry Protects ESC From Overheating

• On-Board Hall Sensor Test Easily and Quickly Verifies That the Motor's Sensors are Working Properly

• Cross-Cut Heat Sink for Reduced Weight and Efficient Cooling

• Gold-Plated Direct-Solder Wiring Tabs Offer Flexible Soldering Options

• User-Replaceable Input Harness, Switch Harness and Power Wires

Specifications:

• Motor Type: Sensored Brushless

• Fwd/Brk/Rev: F / B / R

• Input Cells (LiPo/Ni-MH): 1* to 2S LiPo/LiFe or 4 to 6 NiMH

• Dimensions: 1.16 x 1.47" (29.5 x 37.3mm)

• Height: 0.97" (24.6mm)

• Weight: 1.15oz (32.6g)

• On-Resistance: 0.00040 ohms @ 25°C trans. temp.

• Motor Limit: 540-Size 3.5T or Higher Sensored / 550-Size 4.5T or Higher Sensored

• BEC: 6.0 Volts DC / 3.0 Amps

• Wire Size: 14G Super-Flex Copper-Strand Silicone Wire

• Status LEDs: 5 Multi-Colored

*For 1S applications, a receiver battery pack or receiver booster such as Novak's #5477 1S Booster Module must be used.