Phase 3 Squall EDF 4-cell Hi-Perf ARF

w/Fan/Motor/ESC

Designed, constructed and styled with one aim in mind.....performance!

Identical airframe to the standard version but with a new fan and motor to explore 4-cell performance.

The sleek, precise, EPS foam moldings and high-quality hardware are exactly as you would expect from Phase 3 and assembly is both quick and enjoyable. Actually, a couple of hours will have it done.

The sleek delta-wing design and careful use of the fuselage allows the Squall to explore its entire speed envelope with control and stability. Even the surface finish has been optimized to enhance performance by keeping it as smooth as possible and small fairings are provided for each servo. The powerful elevons can roll the Squall at an amazing rate (aka a blurr!) and the ability to loop in its own length has to be seen to be believed. The added dimension of a rudder on the Squall opens up the possibility of some radical manoeuvres in yaw too.

With 4-cell power, vertical is almost unlimited and speed is mind- blowing. You will need to be quick-witted with this one!

The completely new fan unit, with a 3-blade 64mm impeller, 3400kv outrunner motor and 45A ESC deliver thrust at an amazing rate and power the Squall through some of the widest loops and wing-overs you can imagine. It really is that good! It is recommended that you use the Hobby People 2400mAh 14.8v Li-Po as a minimum, so that battery life is maintained when you're having that much fun. You might need more than one pack though, as the Squall is addictive!

For those that can never have enough performance and really want to challenge their pilot skills, there is an optional Vectored Thrust unit. With power substantially over 1:1 you can be sure of enough thrust to do just about anything. Jet hovering anyone???

Features/Specifications:

• Length: 34.9 In (885mm)

• Wingspan: 25.6 In (650mm)

• Weight: 22.9-27.5 oz (650-780gr)

• Thrust: 27.3 oz (930 gr)

• Includes 3800kv brushless motor for 4-cell LiPo (max)

• Includes Includes 45A brushless ESC for 4-cell LiPo (max)

Requires but does not include radio with elevon mixing and 3 micro servos, and a 4-cell 2400 25C LiPo.

*Note: the manual states 20C-rated batteries, which will work fine. However, for best performance we recommend 25-30C packs.