You have no items in your shopping cart.
Phase 3 Squall EDF Hi-Perf Kit
Thrust Vector Included
Designed, constructed and styled with one aim in mind.....performance!
The sleek, precise, EPS foam moldings and high-quality hardware are exactly what you expect from Phase 3, and assembly is both quick and enjoyable. Actually, a couple of hours will have it done.
The sleek delta-wing design and careful use of the fuselage allows you to explore the Squall's entire speed envelope with control and stability. Even the surface finish has been optimized to enhance performance by keeping it as smooth as possible, and small fairings are provided for each servo. The powerful elevons can roll the Squall at an amazing rate (aka a blur!) and the ability to loop within its own length has to be seen to be believed. The added dimension of a rudder on the Squall opens up the possibility of some radical manoeuvres in yaw, too.
With 4-cell power, vertical performance is almost unlimited and speed is mind-blowing. You will need to be quick-witted with this one!
For those that never have enough performance and really want to challenge their pilot skills, there is an optional Vectored Thrust unit INCLUDED. With power/weight ratio substantially over 1:1 you can be sure of enough thrust to do just about anything. This is a truly new kind of jet flying! The 3-Axis Thrust vector system requires NO additional servos and is extremely easy to install.
• Length: 34.9 In (885mm)
• Wingspan: 25.6 In (650mm)
• Weight: 22.9-27.5 oz (650-780gr)
• Thrust: 27.3 oz (930 gr)
Finishing this kit requires the following equipment be purchased separately (other items may also be required not listed here):
• 70mm EDF Assembly (70mm outside shroud diameter)
• Matching 3-4 Cell Motor & ESC
• 4-Channel Radio with Delta Mixing
• Three 8-12 Gram Micro Servos
• Glue and Other Finishing Supplies
The Squall 4S has been flown with this equipment, of course you are welcome to use any equipment you see fit.
• 109469 4-Cell Fan Assembly with Motor
• 109460 45-Amp 4-Cell ESC
• 118161 4-Cell 2200mAh Li-Po Battery
• 119011 HP-D11M Servos
• 751660 SD-6G Radio)
*Note: the manual states 20C-rated batteries, which will work fine. However, for best performance we recommend 25-30C packs.
|Squall User Guide (10.4 MB)||User Guide/Manual for Phase 3 Squall - All Versions|