Radio Control Hobbies and More!


Airborne Accessories

 

Items 1 to 10 of 70 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction
  1. Cirrus Servo Wire - HD 5 Meters (16ft) JR/Airtronics/RCD
  2. Airtronics Y-Harness - Z Connector

    Airtronics Y-Harness - Z Connector

    No. 477021

    $9.95

    This Y-Harness allows you to plug two servos into one size, then plug the other side into a single channel slot in your receiver. Most commonly used to join two separate aileron servos into one.

    Learn More
  3. Hitec/RCD Y-Harness - 6'' S Conn
  4. Hitec/RCD Servo Extension - HD 24'' W/Gold Pins

    Hitec/RCD Servo Extension - HD 24'' W/Gold Pins

    No. 759604

    $8.97

    This is a 24" long Hitec Heavy Duty Servo Extension w/Gold Pins. Heavy gauge wires with gold pins, gives you the best connection without current loss.

    Learn More
  5. Hitec/RCD Micro Switch Harness
  6. Hitec/RCD Micro Switch Harness

    Hitec/RCD Micro Switch Harness

    No. 759711

    $7.95

    Out of stock

    This is a Hitec Micro Switch Harness. This switch harness is small and lightweight, so it's ideal for smaller models. Connects between the receiver and receiver battery.

    Learn More
  7. Airtronics Battery Holder - 4-Cell w/Switch Harness

    Airtronics Battery Holder - 4-Cell w/Switch Harness

    No. 475045

    $6.99

    Out of stock

    This is an Airtronics Dry Cell Receiver Battery Holder with Switch Harness. This battery holder is typically used to power the receiver in nitro cars and boats, but can be used to power any receiver with a Nominal Input Voltage Rating of 4.8 volts. Compatible with 4 'AA' Alkaline, Ni-Cd or Ni-MH cells (not included).

    Learn More
  8. Airtronics Servo Extension - 24'' Z Conn

    Airtronics Servo Extension - 24'' Z Conn

    No. 477014

    $6.99

    This is an Airtronics 24" Servo Extension with 'Z' Connector. This servo extension is 24" long and is typically used to extend the servo lead to reach your receiver. This servo extension is perfect for extending the aileron servo leads through wing panels or if your model's elevator and rudder servos are mounted in the back of the fuselage.

    Learn More
  9. Cirrus Switch Harness w/Charge Cord HD 300mm Futaba
  10. Airtronics Switch Harness - Standard w/Z Conn

    Airtronics Switch Harness - Standard w/Z Conn

    No. 477002

    $6.99

    This is an Airtronics Standard Switch Harness with Charge Lead. This switch harness features Z Connectors which are compatible with all current Airtronics receivers and most other brands. This switch features a mounting faceplate, mounting screws and charge lead and is ideal for use in nearly all types of aircraft, helicopter, boat and car models.

    Learn More

Items 1 to 10 of 70 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Ascending Direction