Futaba 3PRKA Radio with R203GF Receiver

2.4 GHz FHSS* 3-Channel Radio System

The most affordable 2.4GHz surface system Futaba offers!

The 3PRKA is an outstanding value in basic 2.4GHz control, whether you're looking at it as an inexpensive start-up system or an economical upgrade for your RTR.

It puts the interference-free dependability of Futaba FHSS (Frequency Hopping Spread Spectrum) technology at your fingertips.

• Dual-Rate Steering — a convenient thumb dial lets you dial in steering on the go! Move it clockwise for more steering, or counterclockwise for less!

• Throttle Fail-Safe— moves the throttle to a preset position if signal is lost or interrupted. Prevents runaways and lost vehicles — automatically.

• Low-Battery Warning — a flashing LED lets you know when battery voltage is low and it's time for new batteries.

The R203GF's high-voltage (4.8V-7.4V) design gives you the freedom to use it with LiPo and LiFe packs as well as NiCd and NiMH packs. It's ideal for FHSS systems such as the 3PRKA, but will also auto-adapt for flawless performance with Futaba S-FHSS systems

Easy Access 3rd Channel

Thumb-activated controls include an on/off switch for Channel 3 functions and a dial for adjusting steering response to the exact needs of the moment.

Simple Trim Layout

A compact layout and simple controls make it easy to tailor 3PRKA handling to your driving style. Closing the cover protects the controls from harm and your setup from unwanted changes!

3PRKA Features

• Trims & servo reversing (St., Thr.)

• Dual Rates (St.)

• EPA (Thr)

• Fail-Safe (Thr)

• 70:30 throttle mode

• Channel 3 switching

• Built-in antenna

• Protective cover

• Low-battery warning

• R203GF S-FHSS receiver

Transmitter Specifications:

• Type: 3-Channel FHSS

• Includes: 3-Channel R203GF Receiver

• Requires: (4) "AA" alkaline batteries

Receiver Specifications:

• Type: 3-channel FHSS/S-FHSS

• Input Power: 4.8V-7.4V

• Dimensions: 1-9/16 x l-1/16 x 3/8 in (39 x 26 x 10 mm)

• Weight: 0.28 oz (8 g)

*Please note: the 3PRKA is not compatible with FASST™ electronics.