Airtronics RX60 (92664) 6-Channel 2.4GHz FHSS-1 Park Flyer Receiver
The RX60 (92664) 6-Channel 2.4GHz FHSS-1 Park Flyer Receiver is a small, lightweight, short-range receiver that is compatible with Airtronics RDS and SD series transmitters. Also compatible with the Stylus 2.4GHz FHSS-1 Module. This receiver is specifically designed for lightweight foamies and small 180 to 250 size helicopters. It's perfect for indoor flyers and small park flyers!
In standard Airtronics fashion, this receiver features a push-button binding procedure, a single antenna for lighter weight and easy installation, and it's all packed in a small, lightweight setup.
*This is a short-range receiver. It should not be used in larger R/C models that require longer range.
*All Airtronics 2.4GHz FHSS-1 aircraft receivers now have a Nominal Input Voltage rating of 4.8v ~ 6.6v
Features and Specifications:
• One-Touch Binding
• Single Receiver Antenna
• Frequency/Modulation Type: 2.4GHz/FHSS-1
• Nominal Input Voltage: 4.8v ~ 6.6v
• Weight: .21oz (6.0gr) with Case
• Weight: .16oz (4.0gr) without Case
• Dimensions: 1.58 x 0.72 x 0.43in (40.5 x 18.5 x 11mm)
• Fail Safe Support: Yes (CH 1 ~ CH 4)
*This receiver has a Nominal Input Voltage rating of 4.8v ~ 6.6v, therefore, it can be powered using a 4 Cell or 5 Cell Ni-Cd or Ni-MH battery pack or a 2S Li-Fe/A123 battery pack. DO NOT USE A 2S Li-Po BATTERY PACK!
|Mfr Part Number||92664|
- Great range Review by Tim
- Great range Review by Mike
- 800 Feet and better ! Review by Johnny
I replaced my GWS nano 6N receiver with the little RX60 2.4G Park Flyer FHSS-1 short range receiver. And I can tell you the GWS states 1000´ range and it can fly every bit of it. Well I swapped receivers and flew normaly first time out even thru the "Futaba Zone" where many a Futaba receiver and radio go crazy and no problems noted. I flew my little S-2 foamy bi-plane as far out as I could see it and as far up until it almost disappeared and no problems. Of course here in Texas we are in the wide open spaces but still thats with Cell phones on the flight line, microwave in the pits, WiFi next door at the local farmers house. and Broad band over Power Lines. Also I did the bind with my RDS8K and flew and my SD-10G and flew. Excellent performance.
Keep up the good work guys !
North Dallas RC (Posted on 8/24/10)