JConcepts Anti-Roll Bar (Sway Bar) Kit
for Team Associated SC10/T4 Front & Rear and B4 Rear
This is a JConcepts Anti-Roll Bar (Sway Bar) Kit for the Team Associated SC10/T4 Front & Rear and B4 Rear. This kit is used on the front and rear of the Team Associated SC10 and T4 vehicles, as well as the rear of the B4 vehicles. Having a fast, stable and raceable platform is the key to success. Control is everything, especially in truck racing where the center of gravity is high and the trucks are narrow in width. The JConcepts anti-roll bar kit is the result of continuous driving on indoor, technical driving circuits which require the correct vehicle balance.
JConcepts, together with test drivers Brian Kinwald and Paul Wynn, found the pivot placement on the front and rear a-arms that provided the best performance, which became the basis for the design. The inner mounted locations place more emphasis on wire diameter and less mechanical advantage which provides the driver with a more finely tuned piece. The front inner placement position (SC10 and T4) is located by a carbon fiber bracket that attaches to the front arm and shock assembly with included hardware. A mask template is provided to locate, mark and drill the rear inner placement position. From there, racers can choose from 3 different roll bar wire diameters for the front and rear in 1.2, 1.4 or 1.6mm diameters. Suspension arm to roll-bar connections are made with the exclusive JConcepts molded open and closed ball-cups for proper length, positioning and ease of use.
The roll bars are secured to the vehicle with a rotating "quad" bar mount which provides the hold for the pivoting action. Quad mounts can be rotated for different wire diameters which makes adjustments and changes extremely quick and simple. Drop on the aluminum washers for the flat head screw installation and install the aluminum wire pivots and the anti-roll bar kit looks like a piece of fine craftsmanship ready for high-end racing.
The JConcepts anti-roll bar kit can also be used on the SC10.2 and T4.2 generation gull-wing front suspension by using the included components assembled in a different configuration. Follow the complete installation instructions on how to mount the anti-roll bar kit on vehicles such as the SC10, T4, B4 (rear), SC10.2 and T4.2.
• Carbon Fiber Left and Right Front Location Brackets
• 3 Different Wire Diameters Front and Rear - Black Oxide Coated and Laser Etched
• Aluminum Blue Anodizesd Quad Roll Bar Mounts
• Aluminum Countersunk Washers for Security
• Aluminum Blue Anodized Anti-Roll Bar Wire Pivots
• JConcepts Exclusive Molded Ball-Cups and Open Eyelets for Pivoting Connection
• Installation and Starting Setup Sheet
• Team Associated SC10/T4 Series Vehicles Front & Rear and B4 Series Vehicles Rear
|Mfr Part Number||2166|