Great Planes Pluma 3D
EP ARF Indoor/Outdoor Airplane
With the Pluma, the only thing between you and a full day of aerobatics is a few minutes of easy assembly on the bench. And once you're in the air, you'll discover all of the advantages of exclusive Pro-Formance foam construction. Ultra-light and wafer-thin, its power-to-weight ratio puts the entire aerobatic envelope at your command, from stately loops and rolls to hair-raising waterfalls and knife-edge loops.
Assembles in about an hour and excels indoors and out!
Largely prebuilt, with keyed and laser-cut parts that speed the completion of remaining steps.
Performs everything from traditional air show aerobatics to all-out 3D stunts!
You can speed the Pluma from box to flight-ready in only an hour! The trim scheme is imprinted and the fuselage is already assembled. All other parts (including the servo pockets) are laser-cut, interlocking and self-aligning.
Pluma 3D Specifications:
Wingspan: 32.5 in (830 mm)
Wing Area: 518 in (33.4 dm)
Weight Range: 8.4-9.5 oz (240-270 g)
Wing Loading: 2.3-2.6 oz/ft (7.2-8.1 g/dm)
Length: 38 in (955 mm)
Requires: 4-channel radio w/3 micro servos, outrunner brushless motor, 8A brushless ESC (minimum) & 11.1V 300mAh LiPo battery.
|Mfr Part Number||GPMA1130|
- sweet plane Review by casey
- Excellent 3D Flyer Review by Nate R.
Impulse Power Li-Po 3s 11.1v 900mAH 12C Discharge
KMS 30amp ESC
Ultrafly Frio 10 Brushless = 1050kv
APC 10 x 4.7 SF Prop
Flight Time= 20 mins
This setup will allow you to go vertical! So YES, it does have more than enough power!
(Posted on 6/30/11)
- Fun little plane Review by Propblaster