Great Planes Pluma 3D

EP ARF Indoor/Outdoor Airplane

With the Pluma, the only thing between you and a full day of aerobatics is a few minutes of easy assembly on the bench. And once you're in the air, you'll discover all of the advantages of exclusive Pro-Formance foam construction. Ultra-light and wafer-thin, its power-to-weight ratio puts the entire aerobatic envelope at your command, from stately loops and rolls to hair-raising waterfalls and knife-edge loops.

Assembles in about an hour and excels indoors and out!

Largely prebuilt, with keyed and laser-cut parts that speed the completion of remaining steps.

Performs everything from traditional air show aerobatics to all-out 3D stunts!

You can speed the Pluma from box to flight-ready in only an hour! The trim scheme is imprinted and the fuselage is already assembled. All other parts (including the servo pockets) are laser-cut, interlocking and self-aligning.

Pluma 3D Specifications:

Wingspan: 32.5 in (830 mm)

Wing Area: 518 in (33.4 dm)

Weight Range: 8.4-9.5 oz (240-270 g)

Wing Loading: 2.3-2.6 oz/ft (7.2-8.1 g/dm)

Length: 38 in (955 mm)

Requires: 4-channel radio w/3 micro servos, outrunner brushless motor, 8A brushless ESC (minimum) & 11.1V 300mAh LiPo battery.