Radio Control Hobbies and More!


Hitec/RCD X2 Ultima Two-Port 2x200W LiPo/Ni/Pb 10A DC Charger

Rating
3 Review(s)

Availability: In stock

$149.99

No. 759809

OR

Hitec X2 Ultima Two-Channel 2x200W LiPo/Ni/Pb 10A Charger

Files

LiPo Battery Safety Guide (96.5 KB)

Failure to comply with the safety guidelines in this document may result in damage to your battery, property damage, fire, personal injury and/or loss of life.

Customer Reviews

3 Item(s)

per page
Could be better Review by Maciek
Rating
There are 3 things about this charger that I do not like. The rest is as expected.

1. Very low volume for the beep. When you are charging your battery in the club, and it is done charging, or there is some issue, for example input voltage low, it will beep with very low volume and you will not hear it.

2. Status screen disappears after 1 second. When you are charging your battery and you want to check the status, for example internal temperature, or input voltage, you will go the status screen, and that screen will disappear after 1 second before you even have time too look at it.

3. The touch buttons do not work very well. Sometimes I have to touch the button several times before it will be recognized. I prefer conventional buttons. (Posted on 11/17/13)
Great charger! Review by Edge540
Rating
No push buttons on this one. Basically wave your finger over the buttons. I did have a small issue where there was .2 volt difference between channel 1 & 2 right out of the box. Hitec's warranty was awesome and they fixed it right away. Other chargers do have the ability to adjust the voltage in the set-up program using a volt meter. This charger doesn't have that option or Hitec would not tell me if there was another way to access the unit's set up program. Once they gave me back the charger, it has worked flawlessly. It is a powerhouse with a built in cooling fan. I really love it! Use caution when charging with hi amps. It's easy to wear down your car battery! (Learned that one the hard way). (Posted on 4/2/13)
Great charger! Review by Edge540
Rating
No push buttons on this one. Basically wave your finger over the buttons. I did have a small issue where there was .2 volt difference between channel 1 & 2 right out of the box. Hitec's warranty was awesome and they fixed it right away. Other chargers do have the ability to adjust the voltage in the set-up program using a volt meter. This charger doesn't have that option or Hitec would not tell me if there was another way to access the unit's set up program. Once they gave me back the charger, it has worked flawlessly. It is a powerhouse with a built in cooling fan. I really love it! Use caution when charging with hi amps. It's easy to wear down your car battery! (Learned that one the hard way). (Posted on 4/2/13)

3 Item(s)

per page

Write Your Own Review

You're reviewing: Hitec/RCD X2 Ultima Two-Port 2x200W LiPo/Ni/Pb 10A DC Charger

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating