45yrs. of RC everthing. I had fun with this Kit. Went together well, so well before I finished it I planed to get the F-86. now that I have finished and had a first flight I plan on get the hole line of 90mm jets.

Pros
Big and easy to work on. fun in the air. I used HP 5.5lbs retracts with nose retract from BH $22.50 . Stock fan and motor on 3200 6s 25c lipo i get 1870w.

Cons
Do not use the nose wheel landing gear mount. Not strong at all.I made a 3x4" ply mount. No rudder(i put one in) (Posted on 10/29/12)

The following areas need addressing:
1. The L-shaped 03x 54mm wire (Part #4 in Parts List) does not extend far enough into Part #18, the elevator support. As a consequence, when attached, the elevators will move fore & aft. The wire needs to be longer by 1/8 inch.

2. A straight line wire attached from the elevator servo arm to the elevator movement screw interferes with the nose-down movement of the elevator. A work around was needed to bend the wire so as to allow the elevator to move freely. (Posted on 10/2/12)