Radio Control Hobbies and More!


RPM Skid Plate - T-Maxx 4908 & E-Maxx 3905 Black

Be the first to review this product

Availability: Out of stock

Regular Price: $21.89

Special Price: $16.42

No. 708852

Quick Overview

This is an RPM Center Skid Plate (Black) for the Traxxas T-Maxx & E-Maxx. After quite a bit of prodding from the customers, RPM now has a center skid plate and skid plate set designed specifically for the T-Maxx (#4907 & #4908) & E-Maxx (#3905 & #3908) trucks.

RPM Skid Plate - T-Maxx 4908 & E-Maxx 3905 Black

Details

RPM Center Skid Plate (Black)

for Traxxas T-Maxx & E-Maxx

This is an RPM Center Skid Plate (Black) for the Traxxas T-Maxx & E-Maxx. The extended chassis rails of the newer versions of both the T-Maxx and E-Maxx would not allow RPM's original center skid plate to bolt up to either of these trucks without modification to the chassis rails. After quite a bit of prodding from the customers, RPM now has a center skid plate and skid plate set designed specifically for the T-Maxx (#4907 & #4908) & E-Maxx (#3905 & #3908) trucks.

Unlike the stock center skid plate, the new molded center skid plate extends over the predominance of the chassis rails with better than 4mm of bulletproof RPM protection! The molded curves of the skid plate perfectly mate with the chassis support rails and act as a reduced-friction transition surface that prevents objects from hooking the stock rear skid plate. Other great features include: deep recessed screw holes help eliminate damage to the mounting screw heads, a matched grooved finish from the front of the truck to the rear and provide outstanding wear and impact resistance. The center skid plate provides a more solid tie between the two chassis side rails for added support and rigidity. Additionally, since the center skid plate runs the rearward length of the chassis side rails, less dirt and debris will be forced into the rear skid plate area of the chassis, improving driveline durability and drive shaft bearing longevity.

*The E-Maxx and T-Maxx use different mounting hole locations for the center mounting screws. We left the mounting holes blind to prevent dirt build up in the holes that aren’t used. A 1/8" diameter drill is required to drill out the correct mounting holes for the vehicle the skid plate will be mounted on. For older version T-Maxx, E-Maxx & S-Maxx trucks, our original T/E-Maxx Center Skid Plates are the correct length for the chassis side rails.

Additional Information

SKU 708852
Manufacturer RPM
Mfr Part Number 80772
Video No

Product Tags

Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.