<![CDATA[HobbyPeople.net - Special Products]]> http://www.hobbypeople.net/index.php/rss/catalog/special/store_id/2/ Tue, 02 Sep 2014 15:27:57 +0000 Zend_Feed en_US http://blogs.law.harvard.edu/tech/rss <![CDATA[Airtronics 94814 Micro Digital FAST Servo]]> http://www.hobbypeople.net/index.php/airtronics-94814-micro-digital-fast-servo.html

Airtronics 94814 FAST Micro Digital Servo

The Airtronics 94814 FAST Micro Digital Servo is FAST! Only slightly bigger than a 9g micro servo, the 94814 digital is perfect for 1:12 scale cars, helicopter tail rotor control and 45-50 ounce EP aerobatic aircraft.

This servo is simply impressive. Most servos in this price range do not have enough resolution for high-performance applications like tail rotor control. Not so with the 94814. No other servo we've found produces this much speed, with this much accuracy, at a price that blows away the competition.

Airtronics digital servos feature custom I.C.'s, Surface Mount Technology (SMT) construction and splined output shafts for easier control surface adjustments. Molded neoprene vibration isolators and injection-molded servo cases ensure superior strength and long lasting durability.

This servo features an Airtronics 'Z' connector, which is compatible with all current Airtronics receivers as well as current Hitec, JR and Futaba receivers.

*This Airtronics servo is safe to use with receivers that have a Nominal Input Voltage rating of 4.8v ~ 6.6v.

Features and Specifications:

• Torque at 4.8v: 21oz-in (1.5kg-cm)

• Torque at 6.0v: 25oz-in (1.8kg-cm)

• Speed at 4.8v: 0.07sec/60º

• Speed at 6.0v: 0.06sec/60º

• Weight: 0.60oz (17.0g)

• Dimensions: 1.16 x 0.47 x 1.02in (29.5 x 12.0 x 26.0mm)

• Gear Train: Nylon

• Bushing/Ball Bearing: Bushing

• Motor Type: Standard 3-Pole

• Connector Type: 'Z' Connector

• Includes Mounting Hardware, Servo Wheel and 6-Point Servo Horn

The Advantages of Digital Servos

Digital servos offer extremely accurate and reliable centering, even in more economically priced servos.

Digital servos develop their power instantly. An analog servo develops its full power at its extreme movement. Digital servos develop their power as soon as they move, thus effectively making a digital servo stronger, even if its specifcations are the same as a comparable analog servo.

Digital servos have extreme holding power. A digital servo stays in the position you command with all of its power, thus virtually eliminating the blow back found with analog servos.

Digital servos are precise. When used with a 2.4GHz digital radio, especially a fast radio such as Airtronics, digital servos more accurately translate and hold your command inputs from your transmitter. You will feel more connected to your model than when using analog servos.

Digital servos are compatible with the newest high frame rate receivers. In some cases, analog servos simply won't work with these new, high frame rate receivers.

p style=

Price: $24.99 Special Price: $14.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Airtronics Aquila 6-ch Computer Radio w/RX71E FH1]]> http://www.hobbypeople.net/index.php/airtronics-aquila-6ch-computer-radio-w-rx600-fh1.html

Airtronics Aquila 6ch Computer Radio w/RX71E FH1

Superior Form, Superior Function.

Winner of Model Airplane News Radio of the Year 2014

The Aquila 6 is an advanced 2.4GHz Digital Proportional 6-Channel radio with a unique style and proven 2.4GHz system. The Aquila features Airtronics' proven, rock-solid and reliable 2.4GHz FH1 frequency-hopping transmission scheme. It's true frequency-hopping that provides a superior signal for that “locked-in” feel. And it's ready for any 1-6 channel aircraft or helicopter! From micro electric aircraft to scale aerobatic aircraft, from mini fixed-pitched helicopters to advanced CCPM 3D electric helicopters, the Aquila 6 can handle advanced models with ease! The Aquila 6 is perfect for new pilots just learning to fly, too. The Aquila 6 features a Trainer System that is compatible with all Airtronics SD series transmitters so you can get started flying safely and quickly. Whether you're just starting out or ready to take on advanced 6-channel fixed wing and helicopters, the Aquila 6 is ready to give you superior control.

General System Features:

• 6-Channel 2.4G FHSS-1 Digital Proportional Computer Radio Control System for Aircraft and Helicopters

• Includes Full-Range RX71E 7-Channel 2.4G FHSS-1 Receiver

Aircraft/Helicopter Shared Features:

• 10-Model Memory Direct Model Select (Models 1-3)

• Easy-to-Read Multi-Function LCD with Digital Voltage Display

• User-Selectable Model-Type Templates

• Digital Trims Trainer System Compatible with all Aquila and SD Series Transmitters

• Model Naming

• Model Select

• Audible Low-Voltage Alarm

• Low-Power Range-Check Mode

• Programmable Fail Safe (Ch 1-4)

• User-Selectable Flight Modes (3 Modes)

• Stop Watch and Count-Up Timers

• Data Copy and Data Reset

• Servo Monitor

• Aileron, Elevator, and Rudder Dual Rate

• Aileron, Elevator, and Rudder Exponential

• Servo Reversing

• Servo Centering Sub-Trim

• End-Point Adjustment

• Common or Flight Mode-Specific Trim

Aircraft-Specific Programming Features:

• Throttle Cut

• 5-Point Programmable Throttle Curve

• Aileron Differential

• Mixes:

• Flaperon

• Flap-to-Elevator

• Dual Elevator with End-Point Adjustment

• Ailvator Mixing

• V-Tail Mixing with End-Point Adjustment

• Delta (Elevon) Mixing with End-Point Adjustment

• 2 Programmable Compensation Mixers

Helicopter-Specific Programming Features:

• Common or Flight Mode-Specific Trim with Throttle-Trim Lock

• 9 Pre-programmed Swashplate Templates

• Advanced Swashplate Adjustment

• CCPM End-Point Adjustment

• End-Point Adjustment

• Throttle Cut

• 5-Point Programmable Throttle Curve

• Throttle Hold

• 5-Point Programmable Pitch Curve Revolution Mixing

• 2 Remote Gyro Gains

• 2 Programmable Compensation Mixers

Transmitter Technical Specifications:

• Output Power: 100mW

• Operating Voltage: 6.7-9.6v

• Current Drain: 130-200mA

• Temperature Range: 32-122ºF (0-50ºC)

• Pulse Width: 0.9-2.1msec

• Weight with Batteries: 26.45oz (750gr)

• Frequency/Modulation Type: 2.4GHz/FHSS-1

RX-71E Technical Specifications

• 7 Channels

• Compatible with all SD, Aquila, RDS8000 2.4GHz radios

• Frequency/Modulation Type: 2.4GHz/FHSS-1

• Nominal Input Voltage: 4.8-6.6v

• Weight: .31oz (8.8g) with Case

• Dimensions: 1.80x0.85x0.47in (45.7x21.5x12mm)

• Fail Safe Support: Yes (Ch 1-4)

• Connector Type: Universal 'Z'"

• Temperature Range: 32-212ºF (0-100ºC)

• Dual Antennas on 6 inch extensions for superior installation flexibility for superior flexibility

What's In The Box:

• Aquila 6 6-Channel 2.4GHz FHSS-1 Transmitter

• RX71E 7-Channel 2.4GHz FHSS-1 Receiver

• 7.2v NiMH Rechargeable Battery Pack for Transmitter

• 6 Cell Dry-Cell Transmitter Battery Holder

• AC Dual Output Charger

• On/Off Switch

• User's Guide

Items Required, But Not Included:

• Receiver Battery/Power Source. (Note: Nominal Input Voltage is 4.8v ~ 6.6v, therefore, the receiver may be powered using a 4 Cell or 5 Cell Ni-Cd or Ni-MH battery pack or a 2S Li-Fe/A123 Battery Pack.)

DO NOT USE A 2S Li-Po!

Servos: No servos are included. Analog or Digital servos can be used. We recommend using Airtronics servos that are within the specification range required for your model. However, most modern servos will work perfectly with the Aquila 6

Price: $189.99 Special Price: $169.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Airtronics M12 Competition Pistol Radio w/RX-471 Dry]]> http://www.hobbypeople.net/index.php/airtronics-m12-competition-pistol-radio-w-rx-471-dry.html

Airtronics M12 2.4GHz FH4T

4-Channel Competition Pistol Grip Telemetry-Capable Radio**

with RX-471 FH4 Super Response Receiver

Break the Record!! Feel the Next-Generation in R/C. Pick up an M12!  

This is an Airtronics M12 2.4G FH4T 4-Channel Competition Pistol Grip Telemetry-Capable Radio** with an RX-471 FH4 Super Response Receiver. The M12 is newly-equipped with a 4x higher spec CPU compared to our world champion model, the industry-leading M11X.

Brand new from the ground-up, the M12 is the realization of lofty goals to more than double its analysis ablility and speed. An extremely low latency time, as well as operational and innovative features, guarantee the M12 to be the flagship of a new generation of radios, not just for Airtronics or Sanwa, but for the entire R/C industry.

The M12 responds at almost "Zero-Latency". What is Zero-Latency? It's a measured total latency speed of under 1ms. That's right, the latency of this radio is UNDER ONE MILLISECOND. What's more, the "feeling" of that type of Zero-Latency is 100% adjustible, allowing drivers to change their driving condition and feel instantly.

No other radio has this type of connectivity advantage! The M12's extremely high response time exceeds ALL other radios, and it's all in a package with advanced ergonomics only World Champion Airtronics can deliver. Drive easy knowing you're driving the best!

Bold New Features:

• Weight Reduction Improves Feel and Comfort - 100 Grams Lighter Than M11X

• Includes New RX-471 FH4 Super Response Receiver**

• Supports Telemetry** and PC Link Functions

• PC Link Uses Standard Common Mini USB Connector. No Special Cord Required

• 10-Car Type Templates: The M12 Uses an Entirely New Approach to Car Setup

• 5 Racing Modes: Allows You to Change Programming Settings with a Single Touch to Suit Differing Track and Setup Conditions During a Race

• Telemetry Logger: Able to Record and Send Telemetry Data to Your PC

• Receiver Mode: Allows the M12 to Display Telemetry Data from Other Airtronics Transmitters

• PC Link: Allows You to Save and Load Model Programming Data, Archive Telemetry Data and Update the Transmitter's Firmware

• Dual Steering: Allows You to Adjust Ackerman Angle and Set Up Right and Left Steering Individually

• Adjustable Latency: Allows You to Adjust the "feeling" of the Radio to Match Driving Style and Track Conditions

• Curve Setting: Allows You to Program From 1- to 9-Point Curves for All Channels

• LCD Display: 128 × 256 Full Dot LCD Display with Smooth Scrolling

• Custom Menu: Allows You Creat Custom Programming Menu List

• Evolution From M11X for Competition Level Users

• DMS Setting: Direct Model Select Up to 3 Different Models When Powered Up

• Throttle Mode: Adjust Throttle Trigger Ratio From Standard 7:3 to 5:5 (Balanced)

• Point AUX: Integrated Maximum 6 Point AUX

• MOA MIX : Allows Dig and Burn Control When Using Dual Motors

• 4WS MIX: Allows Front, Rear, Parallel and Tandem Steering When Using Dual Steering Servos

• Speed Setting: Allows You to Adjust Servo Speed in Forward and Return to Neutral Directions

• Model Sort: Allows You to Sort Models in the Model Select List. Put Your Favorites at the Top!

• Offset Setting: Starting Position, Break Store Cancel Function

• Channel Set Menu: Program Common Settings for All Channels from One Screen

• Dry Cell Battery Holder or Use with Ni-MH or 2S LiPo 

Other Features:

• 50-Model Memory

• Direct Model Select Up to 3 Models

• Adjustable Steering and Throttle Channel Response Time

• 10-Car Type Templates Including 3 Crawler Setups

• User-Selectable Start-Up Screen

• PC-Link Allows PC-Connectivity Using Mini USB Cable

• Receiver Safety Link

• Large, Easy-to-Reads LCD with Smooth Scrolling

• Telemetry Logging and Servo Monitor

• Five Racing Modes Allow Setup Changes on the Fly While Driving

• Model Select, Naming, Copy, Clear and Sort

• Selectable Modulation Type

• Programmable Push-Button Switches, Trim Switches, Lever and Dial

• Configurable Vibration Alarms and Timers

• User Naming

• Servo Reversing

• Steering, Throttle and Brake Dual Rate

• End Point Adjustment

• Exponential, ARC and Curve Adjustments

• Servo Speed Adjustment

• Anti-Lock Braking

• Throttle Offset

• Throttle Hold

• Lap Timer and Two Interval Timers

• Large, Easy-to-Read Lap Timer Display

• Two Compensation Mixers

• Channel Set Menu

• Normal, SSR and SHR Servo Modes

• Center or Parallel Trim Types

• Programmable Fail-Safe

• Receiver Battery Voltage Fail-Safe

• Digital Trims

• Servo Sub-Trim

• Variable Rate Adjustment

• Selectable Throttle Bias

• Adjustable Key Volume and Tone

• Programmable Low-Voltage Alert and Limit Alarms

• Separate Display Button

• Inactivity and Over-Voltage Alarms

• Digital Battery-Voltage Monitor

• Adjustible for Right-Handed or Left-Handed Use

M12 Transmitter Specifications:

• Output Power: 100mW

• Nominal Input Voltage: 4.8-7.4v

• Operating Voltage Range: 4.0-9.0v

• Dry Weight: 20.8oz (590g)

• Frequency: 2.4GHz FHSS

• Modulation Type: FH2, FH3, FH3F, FH4T, FH4FT (User Selectable)

RX-471 Super Response Receiver Specifications:

• Nominal Input Voltage: 4.8-7.4v

• Weight: 0.23oz (6.6gr)

• Dimensions: 1.18 x 0.91 x 0.55in (30.0 x 23.3 x 14.0mm)

• Frequency: 2.4GHz FH3/FH4 Selectable Via Transmitter

• Fail-Safe Support: Yes (All Channels)

• Battery Voltage Fail-Safe Limit: 3.5-5.0v (FH3) / 3.5-7.4v (FH4)

What's Included in the Box:

• M12 FH4T Digital High-Response Telemetry Transmitter**

• RX-471 Super Response Receiver**

• On/Off Switch

• Optional Rubber Grips (Large and Small)

• Optional Larger Diameter Steering Wheel

• Optional Steering Wheel Angle Plates (Right and Left)

• Optional Steering Wheel Offset Plate

• Optional Steering Wheel Springs (Soft and Hard)

• Optional Throttle Trigger Angle Brackets (Thin and Thick)

• Receiver Dust Boot Covers

• Transmitter Wrist Strap Mount

Items Required, But Not Included:

• 4 'AA' Batteries for the Transmitter

*About M12 Response Mode - Please be aware that analog servos will not be compatible with the fastest radio settings: SHR, SSR mode. To prevent risk of trouble, do not use analog servo under SHR, SSR mode. Digital servos, SRG, Digital ERG, SDX can be activated under either NOR or SHR mode. SSR mode is only compatible with SRG/SSR series receivers and servos. The Airtronics M12 can be operated with all Airtronics 2.4GHz FHSS-2, FHSS-3 and FHSS-4 car receivers: RX-371, RX-442FS, RX-451, RX-451R, RX-461, RX-462, RX-471.

**Telemetry Capable Airtronics receiver required (RX-461 or RX-462) for full Telemetry capability.

Price: $499.99 Special Price: $449.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Airtronics Module - Stylus 2.4G (Converts to 2.4G FHSS-1)]]> http://www.hobbypeople.net/index.php/airtronics-module-stylus-2-4g-converts-to-2-4g-fhss-1.html

Airtronics Stylus 2.4GHz FHSS-1 Conversion Module

This is an Airtronics Stylus 2.4GHz FHSS-1 Conversion Module. When Airtronics and Sanwa Japan worked together to create 2.4G radios for aircraft, the president of Sanwa was committed to rewarding all of the loyal Airtronics Stylus owners with a module to convert their Stylus transmitters to 2.4G.

This custom 2.4G FHSS-1 module for the Stylus is easy to install and allows Stylus users to take advantage of the Airtronics 2.4G FHSS-1 technology so popular in their other transmitters.

*This module is compatible with all Airtronics 2.4G FHSS-1 aircraft receivers (available separately).

Features:

• Converts Stylus Transmitter to 2.4G FHSS-1 Technology Quickly and Easily

• Includes 2.4G FHSS-1 Module, Antenna, Reflector Plate and Mounting Hardware

• Compatible with All Airtronics 2.4G FHSS-1 Aircraft Receivers

• Leave the Hassle of Frequency Control Behind with 2.4G Technology

• Uses Airtronics FHSS-1 Frequency Hopping Spread Spectrum Technology

*This is a module only. Requires Stylus transmitter and Airtronics 2.4G FHSS-1 aircraft receiver.

Price: $74.99 Special Price: $59.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Airtronics MT-4 Pistol Grip Radio 2.4G w/Telemetry]]> http://www.hobbypeople.net/index.php/airtronics-mt-4-pistol-grip-radio-2-4g-w-telemetry.html

Airtronics MT-4 Telemetry Radio

4-Channel 2.4G FHSS-4T Surface Radio

The Airtronics MT-4 4-Channel 2.4G FHSS-4 radio control system is the first 2.4G pistol grip radio to provide telemetry, industry leading latency, SSR (narrow pulse-width, super fast servo response) compatibility and 4 channels with advanced programming, all in one ultra-lightweight, comfortable case.

The feature set of the MT-4 is like no other radio in our hobby today. When used with the included Airtronics RX461 (92010) FHSS-4 receiver, real-time telemetry tells you what you need to know when you need to know it. In addition, the MT-4 supports the Airtronics FHSS-2 and FHSS-3 modulation types, so it will work with any Airtronics 2.4G FHSS-2 and FHSS-3 surface receiver as well (just no telemetry of course). This means you'll have your choice of affordable aftermarket receivers and high-performance ultra-fast racing receivers to use with the radio. And, all of this is packed into a new ultra-lightweight comfortable case that features an integrated antenna, adjustable grips, adjustable steering and an adjustable trigger.

Whether you're racing at a world-class level, rock crawling over the most complicated courses, or just bashing in the backyard, the MT-4 will do what you need when you need it.

System Features:

• 4-Channel 2.4G FHSS-4T Digital High-Response Computer Radio with Advanced Programming

• Includes RX461 (92010) 2.4G FHSS-4T Telemetry Receiver

• Telemetry System Displays Temperature, RPM/Speed and Voltage in Real-Time

• High-Power FHSS-4T Technology Provides the Best Reception and Connectivity

• 4-Cell Battery Holder for Lighter Weight

• Accepts Optional NiCd or NiMH Batteries or 2S LiPo or 2S Li-Fe/A123 Battery Packs

• 18-Model Memory

• Telemetry Logging

• Channel Set Menu

• Servo Reversing

• Steering, Throttle and Brake Dual Rate

• End-Point Adjustment

• Exponential and ARC Adjustment

• Servo-Speed Adjustment

• Anti-Lock Braking

• Throttle Offset

• Lap and Interval Timers

• Total, Best and Individual Lap Display

• Four-Wheel Steering Mixing

• Dual-Throttle Mixing w/Dig & Burn

• Normal, SSR and SHR Servo Modes

• Center or Parallel Trim Types

• Step Auxiliary

• Point Auxiliary

• Auxiliary Mixing

• Programmable Fail-Safe

• Receiver Battery Voltage Fail Safe

• Digital Trims

• Servo Sub-Trim

• Adjustable Throttle Trigger

• Programmable Switches, Lever and Dial

• Adjustable Steering Wheel

• Adjustable Grip

• Variable-Rate Adjustment

• Model Naming

• Model Select

• Model Select Shortcut (Direct Model)

• Model Clear

• Selectable Modulation Type

• Multi-Function LCD Contrast

• Adjustable Key Volume and Tone

• Programmable Low-Voltage Alarm

• Inactivity and Over-Voltage Alarms

• Digital Battery-Voltage Monitor

Transmitter Specifications:

• Output Power: 100mW

• Nominal Input Voltage: 4.8-7.4v

• Operating Voltage Range: 4.0-9.6v

• Dry Weight: 13.68oz (388gr)

• Frequency/Modulation Type: 2.4G/FHSS-4T/FHSS-3/FHSS-2 (Selectable)

RX461 (92010) Receiver Specifications:

• Frequency/Modulation Type: 2.4G/FHSS-4T

• Nominal Input Voltage: 4.8-7.4v

• Weight: 0.34oz (9.6gr)

• Dimensions: 1.43 x 1.04 x 0.64in (36.2 x 26.5 x 16.3mm)

• Fail Safe Limit: 3.5-7.4v (FH4T) / 3.5-5.0v (FH2/FH3)

• Connector Type: Universal 'Z'

What's In The Box:

• MT-4 4-Channel 2.4G FHSS-4T Transmitter

• RX461 (92010) 4-Channel 2.4G FHSS-4T Receiver

• On/Off Switch

• Receiver Battery Holder

• Optional Grip

• Wrist Strap Anchor

• RPM/Speed and Temperature Telemetry Sensors

• User's Guide

 Items Required, But Not Included:

Transmitter Batteries: The transmitter requires 4 'AA' Alkaline batteries. Conversion to rechargeable batteries is easy and affordable using NiCd or NiMH cells and the Airtronics 95034 110V AC Dual Charger. Alternatively, the transmitter can be powered using a 2S LiPo or 2S A123/LiFe battery pack. DO NOT USE A 3S LiPo!

Receiver Battery: The receiver's Nominal Input Voltage is 4.8- 7.4v, therefore, the receiver can be powered using a 4- to 6-Cell NiCd or NiMH battery pack or a 2S LiPo or 2S A123/LiFe battery pack. DO NOT USE A 3S LiPo!

Servos: No servos are included. Analog or Digital servos can be used. We recommend using Airtronics Digital servos that are within the specification range required for your model.

Price: $249.99 Special Price: $219.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Airtronics MX-V w/WaterProof receiver, 3Ch 2.4Ghz FH2 Radio]]> http://www.hobbypeople.net/index.php/airtronics-mx-v-pistol-grip-with-w-p-receiver-3ch-2-4ghz-fh2-radio.html

Airtronics MX-V

3-Channel 2.4GHz FH2 Digital Pistol Grip Surface Radio System

This Version Includes a 3-Channel WATERPROOF Receiver

This is an Airtronics MX-V 3-Channel 2.4GHz FH2 Digital Pistol Grip Surface Radio System with Waterproof Receiver. No RC sport-racer needs more! Sanwa put the most important functions of a modern transmitter in a new ergonomic design with fast radio response thanks to FH2 2.4GHz technology! The MX-V's user-friendly menu features easy-to-setup functions and a sensational price to performance ratio. With this transmitter, every R/C driver gets all the decisive features in a case design similar to the high-performance MT-4. 

This version of the MX-V comes with a 3-Channel 2.4GHz FH2 Waterproof receiver, but works with ALL Airtronics FH2 2.4GHz surface receivers. This guarantees interference-free R/C car fun, great range and fast transmission of the signal. The 10-model memory with model naming allows an easy and quick change between your models. The complete setup works via the multifunctional display. No matter if you're setting up the antilock braking system, model selection, or expo adjustment, it's no problem with the large and clear display. All important functions are arranged intuitively and can be reached without any problems even with small hands. Due to the low weight, compared to other transmitters in this category, those 45-minute races can be finished without getting tired.

Light weight, affordable price, simple menu system, the right features, fast response and now a waterproof receiver - All the things you'd expect in a much more expensive setup. The Airtronics MX-V is the ultimate RC enthusiast's sport radio.

Features:

• 3-Channel Full-Range 2.4GHz FH2 Digital Proportional Computer Radio for Cars, Trucks and Boats

• Compatible with all Airtronics 2.4GHz FH2 Surface Receivers

• 4-Cell Battery Holder for Lighter Weight and Improved Balance

• Easy-to-Read LCD Screen

• 10 Model Memory

• Servo Reversing All Channels

• Dual Rate Steering

• End Point Adjustment All Channels

• Exponential Steering and Throttle

• Anti-Lock (ABS) Braking

• Digital Trim Display

• Servo Sub-Trim Steering and Throttle

• 3-Character Model Naming

• Battery Voltage Monitor

• Ergonomic, Comfortable Feel

• Textured grip to prevent slipping

• Battery-Less Memory Retention

• Throttle Fail Safe

• Low Voltage Alarm

• Over 1000 Foot Range

• Compatible with Analog or Digital Servos

Transmitter Specifications:

• Output Power: 100mW (FH2)

• Nominal Input Voltage: 4.8v ~ 6.0v

• Operating Voltage Range: 4.0v ~ 9.6v

• Dry Weight: 11.64oz (330gr)

• Frequency: 2.4GHz FH2

Receiver Specifications:

• Nominal Input Voltage: 4.8v ~ 7.4v

• Weight: 0.25oz (7.1gr)

• Dimensions: 1.18 x 1.04 x 0.57in (30.0 x 26.5 x 14.5mm)

• Frequency: 2.4GHz FH2

• Fail Safe Support: Yes (Throttle)

What's In The Box:

• MX-V 3-Channel 2.4GHz FH2 Transmitter

• 3-Channel 2.4GHz FH2 Waterproof Receiver

• On/Off Switch

• Receiver Battery Holder

• User's Guide

Items Required, But Not Included:

• 4 'AA' Alkalkine Batteries or Equivalent Rechargeable Batteries for Transmitter

• 4 to 6 Cell Ni-CD/MH Battery Pack or 2S LiPo/LiFe Battery Pack

• Analog or Digital Servos to Suite Your Model

Price: $119.99 Special Price: $99.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Airtronics Servo Extension - 30 in ATX Conn]]> http://www.hobbypeople.net/index.php/airtronics-servo-extension-30-atx-conn.html

Airtronics 30'' Servo Extension - 'ATX' Connector

This is an Airtronics 30'' Servo Extension with 'ATX' Connector. This servo extension is 30'' long and is typically used to extend the servo lead to reach your receiver. This servo extension is perfect for large models that require long extension leads from the servos to the receiver.

Features:

• Overall Length: 30 Inches

• Color-Coded Wiring (Blue Signal / Red Positive / Black Negative)

• One Male Plug

• One Female Plug

• Compatible with Servos and Receivers that Use Legacy Airtronics 'ATX' Connectors

Price: $2.49 Special Price: $1.25

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Airtronics Super Vortex Zero ESC & RX-472 Combo (ROAR)]]> http://www.hobbypeople.net/index.php/airtronics-super-vortex-zero-esc-rx-472-combo.html

Airtronics Super Vortex Zero ESC & RX-472 Combo

ROAR APPROVED w/Sanwa Synchronized Link (SSL) Support

The Super Vortex ZERO ESC was designed for competition from the ground-up. With almost immeasurable resistance, huge current handling, and advance programming features, this competition ESC is the top ESC in its class. The Super Vortex ESC is compatible with all modern 2.4GHz radios and receivers.

The RX-472 features an extremely low latency time and high frame rate, which makes you feel more connected to your model than ever. Combined with Airtronics or Sanwa Super Response SRG digital servos, the RX-472 will give you reaction speeds like never experienced before!

What is Sanwa Synchronized Link?

When used with an Airtronics M12, an RX-472 2.4GHz FH4T Super Response 4-channel receiver and the Sanwa Super Vortex ZERO ESC, the Sanwa Synchronized Link (SSL) system allows you to change many ESC programming values directly from the transmitter using the transmitter's CODE AUX function. This saves you the time and hassle of not needing to stop and change programming values manually through the ESC. You can make these changes remotely and in higher resolution increments for improved performance. In addition, telemetry data such as speed or RPM, ESC temperature, motor temperature (if supported), and battery voltage can be read directly from the Super Vortex ZERO ESC and displayed on the transmitter.

Super Vortex ESC Specifications and Features

• Brushless Sensored Design with Custom Sanwa ESC Programming

• Adjustable Voltage Cutoff

• Twelve Programming Modes

• Thermal Overload Protection Circuit

• Compatible with Normal, SHR, and SSR Channel Modes

• Supports Remote Programming via the Transmitter (SSL Supported ONLY)

• Input Power (Cells): 1S or 2S LiPo (4C to 6C Ni-MH)

• Motor Limit: 3.5T with 1S or 4.5T with 2S LiPo

• On Resistance: 0.00038 Ohms

• Rated Current: 740 Amps/Phase

• BEC: 6.0V/3.0A

• Dimensions: 1.25x1.39x.77” (32x35.5x19.7mm)

• Weight: 42g (Excluding Wiring and Power Capacitor)

RX-472 Features:

• Sanwa Synchronized Lik (SSL) Compatible

• Designed for Use with Artronics M12 and Sanwa Exzes-Z Transmitters and Sanwa Super Vortex Zero ESC*

• Extremely Low Latency Time and High Frame Rate

• Compatible with Airtronics Super Response Servos

• Compatible with 2S Li-Po Receiver Battery, So You Can Use High Voltage Servos Without a Voltage Regulator

• Small and Lightweight

• Finger Accessible Bind Button

• Supports Receiver Battery Fail Safe Monitoring

RX-472 Specifications:

• Model: RX-472 (92015)

• Frequency: 2.4GHz FH3/FH4T (Selectable Via Transmitter)

• Nominal Input Voltage: 3.7 to 7.4 Volts

• Dimensions: 1.18 x 0.91 x 0.55 Inches (30.0 x 23.3 x 14.0mm)

• Weight: 0.23 Ounces (6.6g)

• Battery Fail Safe Limit: 3.5 to 5.0 Volts (FH3) / 3.5 to 7.4 Volts (FH4T)

Included:

• Super Vortex Zero Competition ESC

• Airtronics RX-472 FH4 Receiver

• Sensor Cable

• Cooling Fan w/Mounting Screws

• 3 Feet 12AWG Flexible silicone Wire

• Heat-shrink Tubing

• User's Guide

Price: $339.99 Special Price: $279.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Airtronics Switch Harness - Standard BEC Regulator]]> http://www.hobbypeople.net/index.php/airtronics-switch-harness-standard-bec-regulator.html

Airtronics Switch Harness with Standard BEC Regulator

This is an Airtronics Switch Harness with Standard BEC Regulator. This switch features an integrated BEC regulator which is used to regulate current from a 7.2 volt 6 cell car battery pack down to a safe approximate 5.0 volts for receivers that are not designed to be used with 7.2 volts or if your car does not use an ESC with BEC.

Features:

• On/Off Switch with Integrated BEC Regulator

• Regulates Voltage Down to ~ 5.0 Volts to Safely Power Receiver

• Male ATX Receiver Connector

• Female BEC Connector for Receiver Battery

• Includes Mounting Screws

Price: $4.99 Special Price: $2.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Align 600A Carbon Fiber Blade]]> http://www.hobbypeople.net/index.php/600a-carbon-fiber-blade.html

Price: $84.99 Special Price: $59.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[AP Glow Plug - AP 061]]> http://www.hobbypeople.net/index.php/ap-glow-plug-ap-061.html

AP Glow Plug - AP 061

AP Engines introduces this Glow plug for the Wasp .061 engine.

Price: $9.99 Special Price: $4.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Associated Sonic 540 Mach 2 17.5 Spec BL Motor]]> http://www.hobbypeople.net/index.php/team-associated-sonic-540-mach-2-17-5-spec-motor.html

Team Associated Reedy Sonic 540 Mach 2

17.5 Turn Modified Sensored Brushless Motor

This is a Team Associated Reedy Sonic 540 Mach 2 17.5 Turn Modified Sensored Brushless Motor. Reedy's return to the competition motor scene with the Sonic 540 was hugely successful on the track and showroom floor. Countless race wins at both the international and club level have proven the motor to be both powerful and reliable. Now, thanks to racing team and customer input, Reedy is proud to introduce the Sonic 540 Mach 2.

Small modifications were made to the already-competitive package to enhance performance, reliability and user-friendliness. A new alloy end cap replaces the plastic version to prevent accidental timing-movement and provide better bearing alignment. Strategically-placed vent holes are now slightly smaller to reduce the chance of debris entering the motor while still maintaining excellent airflow. Internal changes include new bearing sizes to increase maximum RPM and to improve reliability, and silver-plated solder tabs reduce power-robbing resistance. The precision-balanced high-strength sintered rotor remains the same as in the original model with a variety of optional rotors available to fine-tune specific applications and tracks. New 6.0, 7.0, and 8.0 models are now available for greater fine-tuning for specific conditions.

Features:

• Lightweight Design

• Optimized Air Flow

• Dual Precision Ball Bearings

• High-Strength Balanced Sintered Rotor

• Adjustable Timing with Alloy End Cap

• Silver-Plated Solder Tabs

• Completely Rebuildable

• Competition Proven

• 200mm Sensor Wire

• Ultra Smooth, Sensored Operation

• Built to ROAR, EFRA, and IFMAR Specifications

Specifications:

• Input Voltage: 3.7 to 7.4 Volts (2S LiPo or 6C NiMH)

• RPM: 17,041

• kV: 2303

• Turns: 17.5

• Power: 192 Watts

• Maximum Current: 28 Amps

• Efficiency: 95%

• Diameter: 35.8mm

• Length: 52.9mm

• Shaft Diameter: 1/8"

• Weight: 180g

Price: $92.99 Special Price: $74.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[BH Retracts - AT-6 ARF 91]]> http://www.hobbypeople.net/index.php/retracts-at-6-arf-91.html

162052 Retracts - AT-6 ARF 91

Price: $99.99 Special Price: $79.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[BH Su26M 68'' 30CC Gas ARF]]> http://www.hobbypeople.net/index.php/bh-su26m-81-35cc-gas-arf.html

BH Su26M 68'' 30CC Gas ARF

30cc is the new hot size for gas powered aircraft. The new Su-26M 68” span is optimized by BH for the 30cc class aircraft. This is a factory built ARF that is unbelievably easy to get flying.

Inside this beautifully constructed airframe you'll find laser cut wood parts that interlock for a strong lightweight airframe. The factory jig-builds this airframe to ensure it's perfectly straight and true and professionally covers it with high quality Oracover iron-on covering. The cowl is molded and factory fit and painted. There's even a painted pilot inside. The wing is 2-piece bolt-on as well as the horizontal stabilizer. Even the pushrods and linkages are custom made by BH models.

All of this makes it easy to finish and easy to transport. And that's good because once you fly the Sukhoi from BH you'll be wanting more and more airtime. Right-sized, right-priced, and built-just-right, the Sukhoi from BH Models is the best of the “next generation” of quality ARF's.

Specifications

• Wingspan: 1,730 mm 68.11 in.

• Length: 1,620 mm 63.78 in.

• Weight: 5.6 kg 12.32 lbs.

• Radio: 06 channels.

• Servo: 06 servos (We recommend 94851 servos)

• Engine: 30 cc Gas.

• Construction: All Balsa/Plywood Construction Covered wtih Oracover

Price: $569.99 Special Price: $419.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Boscam Sports Camera, Waterproof, 1080p, Wide-Angle]]> http://www.hobbypeople.net/index.php/boscam-sports-camera-waterproof-1080p-wide-angle.html

Boscam HD08A 1080P Full HD

Waterproof Mini Sports Camera

w/170º Wide-Angle Lens for RC Quadcopters, Aircraft and More!

This is a Boscam HD08A 1080P Full HD Waterproof Mini Sports Camera w/170º Wide-Angle Lens for RC Quadcopters, Aircraft and More! This mini sports camera is perfect for recording high-definition 1080P video from your choice of R/C. Works equally well with larger quadcopters, glow and electric aircraft, on- and off-road cars and trucks, and even boats. It's small and lightweight and includes a waterproof case and various mounting attachments. It's an ideal alternative to GoPro brand cameras.

Features:

• Record Full HD 1080P Video

• Small and Lightweight - Ideal for Use with Larger Quadcopters, Aircraft, Cars and Boats

• Ultra Wide-Angle 170º Field of View

• Includes Waterproof Case and Various Mounting Attachments

• Dual 32G Micro SD Card Support (Micro SD Cards Not Included)

• Built-In 1.5" High-Resolution Display

• Front Panel LED Indicators

• Easy to Use

Specifications:

• Sensor: 5.0M 1/2.5" CMOS

• Lens: f/2.8, 6-Layer Glass

• Compression: H.264

• FOV: 170º @ 720P / 170º @ 1080P

• Motion Detection: Yes

• Time Lapse Modes: 1FPS, 2FPS, 6FPS and 1FPM

• Screen: 1.5" HD

• Storage: 2 x 32G Micro SD

• Interface: USB2.0 HDMI

• Battery: 800mAh LiPo

• Working Time: 2 Hours

• Charging Time: 2.5 Hours

• Waterproof: Yes - 30 Meters/90 Feet (w/Dive Case)

• Dimensions: 1.92 x 1.65 x 1.33 Inches (49 x 42 x 34mm)

• Weight: 88g

• Compatible PC System: Windows 7, Vista, Mac OS 10.4.11 and Above

• Output: HDMI, Real Time AV Out

What's Included:

• HD08A 1080P Full HD Camera

• 1 x 800mAh LiPo Battery

• 1 x Waterproof Case w/Case Clip

• 1 x Mounting Accessory Set

• 1 x USB Cable

• 1 x AV Cable

• 1 x User's Guide

Price: $179.99 Special Price: $139.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[BrainStorm P-47 3D Airplane Kite]]> http://www.hobbypeople.net/index.php/brainstorm-p-47-3d-airplane-kite.html 45 inch span. Handle includes 125 ft line. Requires wind of 8MPH or more.

Price: $21.99 Special Price: $14.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Bric Tek R/C Police Truck]]> http://www.hobbypeople.net/index.php/bric-tek-r-c-police-truck.html

BricTek R/C Police Truck

This is a BricTek R/C Police Truck. BricTek is an exciting new line of building blocks. Completely compatible with Lego brand blocks, BricTek offers a high quality alternative that provides great value. BrikTek sets offer a better play value and more pieces than comparable sets.

Features:

• Lego Compatible

• Includes 268 Pieces

• Includes Assembly Manual

• Includes Hand-Held Remote Control

• For Ages 6 and Up

Price: $34.99 Special Price: $24.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Castle Sidewinder SV3 SCT System w/3800kv Waterproof]]> http://www.hobbypeople.net/index.php/castle-sv3-sidewinder-sct-system-w-3800kv-waterproof.html

Castle Creations SV3 Sidewinder SCT & 3800KV Motor

1:10th Scale Waterproof Sport Brushless Power System

This is a Castle Creations SV3 Sidewinder SCT & 3800KV Motor 1:10th Scale Waterproof Sport Brushless Power System. The Sidewinder SCT controller offers a 40% increase in power handling over the previous Sidewinder 1/10 but keeps the same great Sidewinder affordability and the Neu-Castle 4 pole 1410 1Y motor offers 50% more torque than Castle's great CM36 series motors of similar kv. This is a 2 cell race motor perfect for 2 and 4 wheel drive Short Course Trucks.

Add some cool to your motor with the included CC Blower fan and shroud and you are ready to run with the big boys.The Sidewinder SCT is ready to run out of the box, but it is completely Castle Link™ compatible too - drivers can use their Castle Link and Windows PC to tune and tweak all their favorite settings such as brake and throttle curves, throttle response, drag brake and many other parameters that add up to an incredible RC driving experience.

ESC Specifications:

• Input Voltage: 2S to 3S LiPo

• Waterproof: Yes

• Brake: Proportional

• Reverse: Yes (with Lockout)

• Low Voltage Cutoff: Programmable

• Dimensions: 1.80 x 1.40 x 0.9 Inches (45.72 x 35.56 x 22.86mm)

• Weight (with Wires & No Battery Connector): 2.2 Ounces (62.4g)

Motor Specifications:

• KV: 3800

• Length: 2.0 Inches (52.7mm)

• Diameter: 1.4 Inches (36mm)

• Shaft Size: 1/8 Inches

• Weight: 8 Ounces (227g)

What's Included:

• Sidewinder SCT Edition ESC

• Neu-Castle 1410 1Y 3800Kv Motor

• CC Blow Fan Shroud for 36mm Motors

*Although the Sidewinder SV3 and Castle brushless motors are waterproof, always rinse the ESC and motor with fresh water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servo, radio and chassis are also waterproof before exposing them to liquids of any kind.

Price: $119.97 Special Price: $104.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Cermark Cosmos EP ARF]]> http://www.hobbypeople.net/index.php/cermark-cosmos-ep.html

Cermark Cosmos

Your 3-D Machine

You are about to enter the third dimension. Gaze upon the Cosmos, Cermark's three-dimensional machine! With Cosmos, you see more, yet less. The streamlined aerodynamic full fuselage is easier to see in flight. All the electronics are hidden inside making the Cosmos a lean, clean, flying machine! Less drag means better performance. With Captain Cosmos aboard to guide you, your aerobatic maneuvers will command applause whenever you fly! Cermark's Cosmos features large powerful control surfaces for true 3-D style flying when you feel the need. Reduce the control throws and your Cosmos becomes as gentle to fly as most trainers. Expand your modeling world with Cermark's Cosmos!

Specifications:

• Wingspan: 31.25 in

• Length: 31.25 in

• Wing Area: 285 Square In

• Weight RTF: 14-17 Oz.

Additional Items Required but Not Included:

• 4+ channel radio with 4 micro servos

• 28mm brushless outrunner type motor

• Brushless speed control 12-20 amp

• 3 cell 900-1300mah Lithium Polymer battery pack

*NOTE: This is a Cermark Special Buy Item. This item is brand new. Please be aware, some items have shop worn or torn boxes. All Cermark Items: Sales are AS-IS and Final. No Returns or Exchanges. Specifications and recommendations subject to change without notice. We are not responsible for inadvertent errors.
REPLACEMENT PARTS ARE NOT AVAILABLE

Price: $79.99 Special Price: $49.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Cermark F-22 EDF RX-R (SAPAC) ARF]]> http://www.hobbypeople.net/index.php/cermark-f-22-edf.html

Cermark F-22 EDF

The SAPAC F-22 resembles the famous and very-advanced Raptor Jet. The SAPAC F-22 exemplifies the same beautiful lines as the original fighter jet. The wing and body used on this F-22 are specifically designed to allow high-G maneuvers, yet keep a very low wing-loading. This F-22 is a stable aircraft with excellent performance. The included 64mm twin ducted-fans with 3800kV 2830 brushless motors and 30-amp ESC give the F-22 great performance and power for any aerobatic action desired. The F-22 must be flown with at least a 4-channel radio system (not included). On the ground you have control of the steerable nose gear, in the air you have control of speed, ailerons, elevator and rudder (includes mounted servos).

Specifications:

• Length: 44.30 in (1125mm)

• Wingspan: 31.7 in (805mm)

• Wing Area: 3.98 sq. feet

• Wing Loading: 9.25 oz/sq. feet

• Flying Weight: 37 Oz (1050g)

•  Requires but does not include: 4+ -channel transmitter with receiver, 11.1V 3,000 mAH LiPo battery and charger.

*NOTE: This is a Cermark Special Buy Item. This item is brand new. Please be aware, some items have shop worn or torn boxes. All Cermark Items: Sales are AS-IS and Final. No Returns or Exchanges. Specifications and recommendations subject to change without notice. We are not responsible for inadvertent errors.
REPLACEMENT PARTS ARE NOT AVAILABLE

Price: $219.99 Special Price: $99.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Cermark Ultimate EP ARF]]> http://www.hobbypeople.net/index.php/cermark-ultimate-ep.html

Cermark's Ultimate Biplane ARF

Cermark's Ultimate-E ARF marks a new era in aerobatic excitement! Imagine scale appearances with performance to match! Never before has something so beautiful been so easy to complete. And the Ultimate-E is small enough to take to the field in one piece, yet large enough to fly when the "Park Flyers" are grounded. Built-up wood with heat-shrink covering.

Features:

• One-piece wings for fast assembly

• Easy-access battery hatch

• Factory-installed pilot and canopy

• All neccessary hardware plus spinner included

• Five-color factory applied color scheme

• Four ailerons for maximum roll rate

• Oversize control surfaces

Specification:

• Wingspan: 30 In

• Length: 31 In

• Wing Area: 300 Sq-in

• Flying Weight: 22-28 oz.

Required but NOT Included:

• Propeller: APC 11 x 7E

• Controller: Hobby People 20A ESC (118615)

• Motor: 2814-1030 Motor

• Battery: 11.1V, 3 Cell Li-Po 1300-2100mAh

• Radio: Airtronics Aquila 6 Channel Radio (751662)

• Servos: 4 Hobby People HP-A9N Micro Servo

*Note: This is a Cermark Special Buy Item. This item is brand new. Please be aware, some items have shop worn or torn boxes. All Cermark Items: Sales are AS-IS and Final. No Returns or Exchanges. Specifications and recommendations subject to change without notice. We are not responsible for inadvertent errors.
REPLACEMENT PARTS ARE NOT AVAILABLE

Price: $99.99 Special Price: $64.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[DHK Hunter BL SCT 1/10 4x4 Brushless - No Battery/Charger]]> http://www.hobbypeople.net/index.php/dhk-hunter-bl-sct-1-10-4wd-brushless-no-battery-or-charger.html

DHK Hunter BL SCT 1/10 4WD Brushless

Drive Hard. Rest Easy.

Expect more when you drive the Hunter SCT BL from DHK. Expect more reliability, more performance, more fun! DHK's Hunter has the performance and brushless-power to impress experienced drivers with an easy setup perfect for any skill level.

The backbone of the Hunter is the tough, double-deck chassis layout and competition suspension. This super-stiff chassis and plush suspension is complemented by an advanced and tunable 3-differential four-wheel drive (4x4) power-train normally only reserved for 1/8th scale racers. These advanced differentials provide tuning (by using different weight oils) not found in lesser RTR vehicles. Propulsion is by a powerful brushless motor and ESC ready for any 2-cell LiPo battery or 6-7 cell NiMH pack.

The Hunter BL is loaded with even more superior design features from adjustable threaded shocks to its mid-motor design. Set up the Hunter for hard driving whether you're competing or bashing, on just about any surface from asphalt to dirt. And, the Hunter SCT BL RTR is factory-assembled and ready to use. Just charge your batteries and get ready to race!

Drive hard with the rugged, refined SCT design. Get out and win with the DHK Hunter SCT BL.

Features

• Factory-built with 2.4Ghz Radio system

• Brushless motor (3970kv) and 45A BL ESC

• 4WD Mid-Motor Chassis Layout

• Racing 3-Differential Powertrain (front, center, and rear)

• Adjustable Oil-filled Coil-Over Shocks

• Adjustable turnbuckles

• Large impact-absorbing front and rear bumpers

• Standardized wheel hexes and short course body. (After market wheels and bodies readily fit.)

Specifications

• Length: 22 in (558.8mm) from bumper to bumper

• Width: 12.2 in (310mm)

• Height: 7.68 in  (195mm)

• Wheelbase: 13 in (330mm)

• Radio: DHK 2.4Ghz Pistol Grip

• Steering Servo: 3kg

• Weight: 5.50 lbs (2.49kg)

• ESC: Brushless 45A

• Motor: Brushless 3970kv

• Speed: 35+ MPH

Items needed to complete

• 2-cell Li-Po battery (such as HP# 118119 - 4000Mah, or 118130 - 5000Mah)

• Suitable battery charger (such as HP# 118546 - Activator EZ, or HP# 118551 - Activator 50)

Price: $299.99 Special Price: $259.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[DHK Hunter SCT 1/10 RTR 4x4 Short Course - w/Battery/Charger]]> http://www.hobbypeople.net/index.php/dhk-hunter-sct-1-10-rtr-4wd-short-course-w-batt-charger.html

DHK Hunter SCT 1/10 RTR

4WD Short Course Truck w/ Battery and Charger

Rugged. Refined. Right.

Only DHK has put so many high-performance features in a truck anyone can drive. The rugged Hunter 4x4 Short-Course Truck (SCT) is ready for anyone looking to get a durable, easy-to-operate truck in a complete ready-to-run (RTR) package. Extremely fun to drive, the Hunter SCT is set to impress beginners and experts alike.

Drive it in the dirt. Drive it on the pavement. Drive it ANYWHERE! The ultra-stiff double-deck chassis and mid-motor design provides better balance, aggressive steering, and suspension performance that's race-ready for any surface! Full-time four-wheel-drive puts the power to the ground with awesome traction. Large impact-absorbing bumpers protects the Hunter during big jumps and even those not-so-perfect landings. Over sized threaded shocks, adjustable turnbuckles, adjustable differentials and numerous after market compatible parts gives the Hunter SCT endless options for tuning, adjustment, and customization for every driving style. No matter what you throw at it, the Hunter's right on target.

Universal drive axles, large bore shocks, completely adjustable turnbuckles, and an aluminum upper deck really make the Hunter SCT truck stand out from other short course trucks in this class.  After a year of testing all of these components, DHK has made sure the Hunter trucks are worry free and simply fun to drive.  Bash with friends or take your DHK Hunter SCT to the local track and compete!  With so many adjustments, anyone can set up the Hunter SCT trucks to accommodate their driving style.

Get the rugged DHK Hunter SCT and you'll know you've made the right decision!

Features

• Complete Package with 2.4GHz Radio, NiMH Battery, Charger

• Standardized wheel hexes and short course body. (After market wheels and bodies readily fit.)

• 4WD Mid-Motor Chassis Layout

• Adjustable Oil filled Coil-Over Shocks

• Adjustable turnbuckles

• Large, impact absorbing front and rear bumpers

Specifications

• Length: 22” (558.8mm) from bumper to bumper

• Width: 12.2” (310mm)

• Height: 7.68” (195mm)

• Wheelbase: 13” (330mm)

• Radio: DHK 2.4Ghz Pistol Grip

• Steering Servo: 3kg

• Weight: 6.10 lbs (2.76kg)

• ESC: Brushed 45A

• Motor: Brushed 550 size

• Battery: 7.2V 1800mAh 20C NiMH

• Charger: AC Input Charger

• Speed: 20 MPH

Price: $219.99 Special Price: $199.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[DHK Optimus RTR 1/8 4WD Brushless Buggy (3S)]]> http://www.hobbypeople.net/index.php/dhk-optimus-rtr-1-8-4wd-brushless-buggy-3s.html

DHK Optimus RTR 1/8 4WD Brushless Buggy

The DHK Optimus - Number 1 in 1/8th EP RTR Value!

The Optimus buggy is a complete package that is fast, fun, and durable. Take control of your Optimus buggy with the easy-to-use DHK 2.4G radio and drive at over 40 MPH with the included 3S LiPo battery. The Optimus features oil-filled all-metal shocks on metal shock towers. The suspension is adjustable and durable. It's all mounted to a metal buggy chassis with a double-deck top-plate making the entire setup strong and durable.

 DHK has redefined the RTR 1/8th-scale category with innovative RC trucks and buggies. DHK is small on price but big on features.  From the ground-up, DHK had the backyard basher and experienced enthusiast in mind. The Optimus buggy has advanced suspension adjustments and geometry providing chassis design that can be precisely tuned for any track setup. And when you're ready to fly off the big jumps, the Optimus is ready with durable plush suspension and the power to catch BIG-AIR. The buggy is set up to never let you down. Durability, adjustability, simplicity. DHK Optimus is the right choice for 1/8th-scale EP sport buggies.

DHK Optimus Buggy Features

• Complete Package with Radio, LiPo Battery, Charger

• High-Power Brushless Motor and ESC Combo

• 4WD 3-Diff Competition Chassis Layout

• All-Metal Coil-Over Shocks

• 40+ MPH

DHK Optimus Buggy Specifications

• Length: 19.4” (493mm)

• Width: 12.1” (307mm)

• Height: 6.76” (172mm)

• Wheelbase: 12.9” (330mm)

• Weight: 6.5lbs (2.92kg)

• ESC: 60A Brushless

• Motor 2260kv 11.1V

• Battery: qty 1 11.1V 3200mAh Li-Po

• Steering Servo: 9kg Metal Gear

• Radio: DHK 2.4G Pistol Grip

• Charger: AC Input LiPo Balance Charger

• Speed: 40+ MPH

Price: $399.99 Special Price: $279.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[DHK Raz-R BL RTR 1/10 4WD ST - No Battery/Charger]]> http://www.hobbypeople.net/index.php/dhk-raz-r-bl-rtr-1-10-4wd-st-no-battery-or-charger.html

DHK Raz-R Brushless 1/10 Stadium Truck 

RTR 4WD Offroad Truck w/ 2.4 GHz Radio

The DHK RAZ-R BL 1/10th-scale brushless stadium truck has all of the great features you need in a RTR package. Brushless power system and fully adjustable suspension with good ground clearance make the RAZ-R BL an easy choice. The brushless power system shoots the DHK RAZ-R BL truck to speeds of 45mph from a standstill, and with the oil filled, coil-over suspension it can easily soak up rough terrain and drive smoothly through it.

Over sized axles, large bore shocks, completely adjustable turnbuckles, and an aluminum upper deck really make the DHK RAZ-R BL truck stand out from other 1/10 scale stadium trucks. DHK understands that trucks need to be durable and perform well. Stronger components were inlcuded in the construction of DHK trucks and buggies to provide worry free driving and a greater customer satisfaction. With these great features, it's easy to see why the DHK RAZ-R BL brushless stadium truck is a great choice for anyone looking to get a ready to run truck with awesome speed, handling, and reliability.

 DHK RAZ-R BL Features:

• Brushless Motor and ESC Combo

• 4WD Mid Motor Chassis Layout

• Adjustable Coil-Over Shocks

• Adjustable turnbuckles

DHK RAZ-R BL Specifications

• Length: 18.00” (459mm)

• Width: 11.8” (300mm)

• Height: 7.28” (185mm)

• Wheelbase: 11.4” (290mm)

• Weight: 4.75lbs (2.15kg)

• ESC: Brushless 35A

• Motor: Brushless 3970kv

• Steering Servo: 6kg

• Radio: DHK 2.4Ghz Pistol Grip

• Speed: 35+ MPH

Price: $259.99 Special Price: $229.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[DHK Raz-R RTR 1/10 4WD w/Ni-MH Battery Stadium Truck]]> http://www.hobbypeople.net/index.php/dhk-raz-r-1-10-4wd-brushed-stadium-truck-w-ni-mh-battery.html

DHK Raz-R 4WD Truck 

RTR 1/10 Brushed Stadium Truck w/ 2.4 G Radio, NiMH Battery, and Charger

The DHK RAZ-R RTR 1/10th-scale stadium truck is a complete package that all entry-level enthusiasts can appreciate. DHK has made sure that certain areas of the truck are durable enough for anyone. Many parts are even borrowed from bigger 1/8th-scale platforms! With large coil-over shocks, over-sized ball bearings, strong drive train, large drive axles, composite chassis, aluminum upper chassis plates and shock towers, the DHK RAZ-R truck is sure to withstand harsh driving conditions while allowing the driver to control the vehicle with ease.

An entry-level vehicle should be fast enough to enjoy, but not too fast where the user can't control it. DHK understands this and provides an electronic speed control with forward and reverse, and a motor that is well suited for learning. Everyone can enjoy the DHK RAZ-R stadium truck with its great looks and stout suspension. With increased ground clearance, the DHK RAZ-R is able to tear up most terrain it encounters and drive through it with ease thanks to the 4WD drive system. The large-bore coil-over shocks soak up the obstacles and jumps, and allow the DHK RAZ-R truck to conquer these with ease. The differentials and shocks are also oil-filled which allows the user to tune them for different terrain and make sure the RAZ-R is adaptable to various conditions. A complete package, the DHK RAZ-R 4WD stadium truck is sure to please new hobbyists with endless fun!

 DHK RAZ-R Features:

• Complete Package with 2.4G Radio, NiMH Battery, Charger

• Electronic Speed Control and Motor Combo

• 4WD Mid-Motor Chassis Layout

• Adjustable Coil-Over Shocks

• Adjustable turnbuckles

DHK RAZ-R Specifications

• Length: 18.00” (459mm)

• Width: 11.8” (300mm)

• Height: 7.28” (185mm)

• Wheelbase: 11.4” (290mm)

• Weight: 4.90lbs (2.22kg)

• ESC: Brushed 45A

• Motor: Brushed 550

• Battery:  7.2V 1800mAh NiMH

• Steering Servo: 6kg

• Radio: DHK 2.4G Pistol Grip

• Charger: AC Input NiMH Charger

• Speed: 20+ MPH

Price: $199.99 Special Price: $159.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[DHK Wolf 1/10 4WD RTR Buggy w/NiMH Batt & Charger]]> http://www.hobbypeople.net/index.php/dhk-wolf-1-10-4wd-brushed-buggy-w-ni-mh-battery.html

DHK Wolf 4WD Buggy 

RTR 1/10 Brushed Buggy w/ 2.4 GHz Radio, NiMH Battery, and Charger

The DHK Wolf 1/10th-scale buggy is a complete package that all entry-level enthusiasts can appreciate. DHK has made sure that certain areas of the buggy are durable enough for anyone. Many parts are even borrowed from bigger 1/8th-scale platforms! With large coil-over shocks, strong drive train, large drive axles, composite chassis, aluminum upper chassis plates and shock towers, the DHK Wolf is sure to withstand harsh driving conditions while allowing the driver to control the vehicle with ease.

An entry-level vehicle should be fast enough to enjoy, but not too fast where the user can't drive it. DHK understands this and provides an electronic speed control with forward and reverse, and a motor that is well-suited for learning in the DHK Wolf. Everyone can enjoy the DHK Wolf buggy with its great looks and over-sized axles. With 4WD, the DHK Wolf is able to tear up most terrain it encounters and drive through it with ease thanks to the mounted knobby tires. The large-bore coil-over shocks soak up the obstacles and jumps, and allow the DHK Wolf to take on these with ease. The shocks are also oil-filled which allows the user to tune them for different terrain and make sure the DHK Wolf buggy is adaptable to various conditions. A complete package, the DHK Wolf buggy is sure to please new hobbyists and not let them down!

Features:

• Complete Package with 2.4G Radio, NiMH Battery, Charger

• Electronic Speed Control and Motor Combo

• 4WD Mid-Motor Chassis Layout

• Adjustable Coil-Over Shocks

• Adjustable turnbuckles

Specifications

• Length: 17.91” (455mm)

• Width: 10.24” (260mm)

• Height: 6.89” (175mm)

• Wheelbase: 11.5” (292mm)

• Weight: 4.55lbs (2.06kg)

• ESC: Brushed 45A

• Motor: Brushed 550

• Battery: 7.2V 1800mAh NiMH

• Steering Servo: 3kg

• Radio: DHK 2.4G Pistol Grip

• Charger: AC Input NiMH Charger

• Speed: 20+ MPH

Price: $189.99 Special Price: $149.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[DHK Wolf BL RTR 1/10 4WD Buggy - No Battery/Charger]]> http://www.hobbypeople.net/index.php/dhk-wolf-bl-rtr-1-10-4wd-buggy-no-battery-or-charger.html

DHK Wolf BL Buggy 

RTR 1/10 4WD Brushless Buggy w/ 2.4 GHz Radio

The DHK Wolf BL 1/10th-scale brushless buggy has all of the great features you need in a RTR package. Brushless power system and fully adjustable suspension make the DHK Wolf BL buggy an easy choice. The powerful brushless system rockets the DHK Wolf BL buggy to amazing speeds from a standstill, and with the oil filled, coil-over suspension it can easily soak up rough terrain and drive smoothly through it.

Over sized axles, shocks, completely adjustable turnbuckles, and an aluminum upper deck really make the DHK Wolf BL stand out from other 1/10 scale buggies. DHK understands that trucks and buggies need to be durable and perform well. Stronger components were used in the construction of the DHK trucks and buggies to provide worry free driving and a great customer satisfaction. With these great features, it's easy to see why the DHK Wolf BL brushless buggy is a great choice for anyone looking to get a ready to run offroad vehicle that has awesome speed, handling, and reliability.

Features:

• Brushless Motor and ESC Combo

• 4WD Mid Motor Chassis Layout

• Adjustable Coil-Over Shocks

• Adjustable turnbuckles

Specifications

• Length: 17.91” (455mm)

• Width: 10.24” (260mm)

• Height: 6.89” (175mm)

• Wheelbase: 11.5” (292mm)

• Weight: 4.30lbs (1.95kg)

• ESC: Brushless 35A

• Motor: Brushless 3970kv

• Steering Servo: 3kg

• Radio: DHK 2.4Ghz Pistol Grip

• Speed: 35+ MPH

Price: $249.99 Special Price: $219.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro #2 Flat Washers (8)]]> http://www.hobbypeople.net/index.php/dubro-2-flat-washers-8.html

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro #2 x 1/2'' Socket Head Sheet Metal Screws]]> http://www.hobbypeople.net/index.php/dubro-2-x-1-2-socket-head-sheet-metal-screws.html Dubro #2 x 1/2" Socket Head Sheet Metal Screws

These zinc plated socket head sheet metal screws are fully threaded and have more applications than wood screws. The non-slip socket head makes hard to get at places easy! Perfect for mounting servos, landing gear straps, motor mounts, etc.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro #2 x 3/8'' Socket Head Sheet Metal Screws]]> http://www.hobbypeople.net/index.php/dubro-2-x-3-8-socket-head-sheet-metal-screws.html Dubro #2 x 3/8" Socket Head Sheet Metal Screws

These zinc plated socket head sheet metal screws are fully threaded and have more applications than wood screws. The non-slip socket head makes hard to get at places easy! Perfect for mounting servos, landing gear straps, motor mounts, etc.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro #4 Flat Washers (8)]]> http://www.hobbypeople.net/index.php/dubro-4-flat-washers-8.html Dubro #4 Flat Washers (8)

Flat and Split Washers Zinc Plated

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro #4 Split Washers (8)]]> http://www.hobbypeople.net/index.php/dubro-4-split-washers-8.html

Dubro #4 Split Washers (8)

Flat and Split Washers Zinc Plated

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro #4 x 1/2'' Socket Head Sheet Metal Screws]]> http://www.hobbypeople.net/index.php/dubro-4-x-1-2-socket-head-sheet-metal-screws.html

Dubro #4 x 1/2" Socket Head Sheet Metal Screws

These zinc plated socket head sheet metal screws are fully threaded and have more applications than wood screws. The non-slip socket head makes hard to get at places easy! Perfect for mounting servos, landing gear straps, motor mounts, etc.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro #4 x 3/4'' Socket Head Sheet Metal Screws]]> http://www.hobbypeople.net/index.php/dubro-4-x-3-4-socket-head-sheet-metal-screws.html

 

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro #6 Flat Washers (8)]]> http://www.hobbypeople.net/index.php/dubro-6-flat-washers-8.html Dubro #6 Flat Washers (8)

Flat and Split Washers Zinc Plated

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro #6 x 3/4'' Socket Head Sheet Metal Screws]]> http://www.hobbypeople.net/index.php/dubro-6-x-3-4-socket-head-sheet-metal-screws.html

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1'' Mini Lite Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-1-mini-lite-wheels.html

Dubro 1" Mini Lite Wheels Ideal for indoor and park flyers. DuBro's Mini Lite Wheels are lightweight and features a 2-piece press-together hub and a super-light foam tire. Comes standard with .047 axle hole and can be drilled out for larger diameter axles. Each wheel weighs 0.90 gr. These Mini Lite Wheels are sure to give your airplane that scale look.

Price: $4.25 Special Price: $3.19

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1'' Tailwheel 3/32'' axle]]> http://www.hobbypeople.net/index.php/dubro-1-tailwheel-3-32-axle.html Dubro 1" Tailwheel 3/32" axle

This tail wheel takes a 3/32 Axle (2mm). Du-Bro Tailwheels are sporty looking and have a machined one piece aluminum hub.

Price: $2.68 Special Price: $2.01

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1-1/2 Tail Wheel]]> http://www.hobbypeople.net/index.php/dubro-1-1-2-tail-wheel.html Dubro 1-1/2 Tail Wheel

This tail wheel takes a 1/8 Axle (3mm). Du-Bro Tail wheels are sporty looking and have a machined one piece aluminum hub.

Price: $3.31 Special Price: $2.48

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1-1/2'' Micro Lite Wheels]]> http://www.hobbypeople.net/index.php/dubro-1-1-2-micro-lite-wheels.html

Dubro 1-1/2" Micro Lite Wheels DuBro's new Micro Lite Wheels are available in 3 sizes: 1-1/2" (38mm), 2" (51mm) and 2-1/2" (64mm). They feature a one piece design, with polished spokes and flat black wheel (no O-Rings to come off rim). Comes complete with 2 sets of wheel retainers, a wide axle hub for a true running wheel. Perfect for indoor and park flyers. 1 pair/pkg.

Price: $3.20 Special Price: $2.40

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1-1/2'' Mini Lite Wheels]]> http://www.hobbypeople.net/index.php/dubro-1-1-2-mini-lite-wheels.html Dubro 1-1/2" Mini Lite Wheels DuBro's new Micro Lite Wheels are available in 3 sizes: 1-1/2" (38mm), 2" (51mm) and 2-1/2" (64mm). They feature a one piece design, with polished spokes and flat black wheel (no O-Rings to come off rim). Comes complete with 2 sets of wheel retainers, a wide axle hub for a true running wheel. Perfect for indoor and park flyers. 1 pair/pkg.

Price: $4.57 Special Price: $3.43

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1-1/4 Tailwheel]]> http://www.hobbypeople.net/index.php/dubro-1-1-4-tailwheel.html

Dubro 1-1/4 Tailwheel

This 1-1/4 tailwheel takes a 3/32 Axle (2mm). Du-Bro Tailwheels are sporty looking and have a machined one piece aluminum hub.

Price: $3.05 Special Price: $2.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1-1/4'' Cut Off Wheel & Mandril (1)]]> http://www.hobbypeople.net/index.php/1-1-4-cut-off-wheel-and-mandril-1.html

Dubro 1-1/4" Cut Off Wheel and Mandril

This is a Dubro 1-1/4" Cut Off Wheel and Mandril. This cut off wheel is fiberglass-reinforced to prevent brittleness. It is perfect for cutting through most woods, plastics and metals. Includes mandril for rotary tool.

• Includes Cut Off Wheel and Mandril for Rotary Tool

• 1-1/4" Diameter

• Fiberglass-Reinforced to Prevent Brittleness

• Perfect for Cutting Throught Most Woods, Plastics and Metals

Price: $4.35 Special Price: $3.26

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1-1/4'' Cut Off Wheel for Moto Tools]]> http://www.hobbypeople.net/index.php/1-1-4-cut-off-wheel-for-moto-tools.html

Dubro 1-1/4" Cut Off Wheels (2-Pack)

This is a 2-Pack of Dubro 1-1/4" Cut Off Wheels. These cut off wheels are fiberglass-reinforced to  prevent brittleness. They are perfect for cutting through most woods, plastics and metals.

• 2-Pack of Cut Off Wheels

• 1-1/4" Diameter

• Fiberglass-Reinforced to Prevent Brittleness

• Perfect for Cutting Throught Most Woods, Plastics and Metals

Price: $4.35 Special Price: $3.26

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1-1/4'' Mini Lite Wheels]]> http://www.hobbypeople.net/index.php/dubro-1-1-4-mini-lite-wheels.html Dubro 1-1/4" Mini Lite Wheels Ideal for indoor and park flyers. DuBro's Mini Lite Wheels are lightweight and features a 2 piece press together hub and a super light foam tire. Comes standard with .047 axle hole and can be drilled out for larger diameter axles. These Mini Lite Wheels are sure to give your airplane that scale look.

Price: $4.41 Special Price: $3.31

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1-3/4'' Smooth Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-1-3-4-smooth-wheels-2.html

Price: $5.25 Special Price: $3.94

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1-3/4'' Treaded Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-1-3-4-treaded-wheels-2.html Dubro 1-3/4" Treaded Wheels (2)

These wheels takes a 1/8 Axle (3mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass & paved runways.

Price: $5.25 Special Price: $3.94

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1/16'' Dura-Collars - Bulk Pack]]> http://www.hobbypeople.net/index.php/dubro-1-16-dura-collars-bulk-pack.html Dubro 1/16" Dura-Collars - Bulk Pack

Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench.

Price: $5.50 Special Price: $4.13

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1/4'' x 3-3/8'' Axle Shaft (Qty 2)]]> http://www.hobbypeople.net/index.php/dubro-1-4-x-3-3-8-axle-shaft-qty-2.html

Dubro Axle Shaft

1/4" x 3-3/8" Axle Shaft. Bolts to any dural landing gear. Easy installation. Comes complete with nylon insert lock nuts. Spring Steel Zinc Plated.

Price: $8.24 Special Price: $6.18

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1/4-20 Tap & Drill Set]]> http://www.hobbypeople.net/index.php/1-4-20-tap-and-drill-set.html

Dubro 1/4-20 Tap and Drill Set

This is a Dubro 1/4-20 Tap and Drill Set. This tap and drill set includes a 1/4-20 tap and matching correctly sized drill bit.

Features and Specifications:

• High- Quality Steel Tap and Drill

• Include 1/4-20 Tap and Matching Correctly Sized Drill

*Requires tap handle. Tap handle not included.

Price: $7.56 Special Price: $5.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1/5 Scale Treaded J-3 Cub Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-1-5-scale-treaded-j-3-cub-wheels-2.html Dubro 1/5 Scale Treaded J-3 Cub Wheels (2)

1/5 Scale (338TLC) takes a 3/16 (4.7mm) Axle size. Add the realism and final detail to your J-3 Cub with Du-Bro's Treaded Lightweight Cub Wheels. These J-3 Cub Wheels offer bolt together hubs and realistic looking Cub wheel covers. Available in three sizes, these lightweights feature a foam interior, yet have a tough and rugged exterior skin for durability.

Price: $24.99 Special Price: $18.74

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1/8'' Dura-Collars - Bulk Pack]]> http://www.hobbypeople.net/index.php/dubro-1-8-dura-collars-bulk-pack.html Dubro 1/8" Dura-Collars - Bulk Pack

Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench.

Price: $5.15 Special Price: $3.86

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 1/8'' Tubing Bender]]> http://www.hobbypeople.net/index.php/dubro-1-8-tubing-bender.html

Dubro 1/8" Tubing Bender

Designed for use with 1/8 or 5/32 brass fuel tubing or aluminum tubing, these tools are perfect for most configurations. Does not collapse tubing wall. Perfect for use on air lines for retracts. Bends annealed brass or aluminum tubing.

Price: $11.49 Special Price: $8.62

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 10-32 Tap & Drill Set]]> http://www.hobbypeople.net/index.php/10-32-tap-and-drill-set.html

Dubro 10-32 Tap and Drill Set

This is a Dubro 10-32 Tap and Drill Set. This tap and drill set includes a 10-32 tap and matching correctly sized drill bit.

Features and Specifications:

• High-Quality Steel Tap and Drill

• Includes 10-32 Tap and Matching Correctly Sized Drill

*Requires tap handle. Tap handle not included.

Price: $7.56 Special Price: $5.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 10-32 x 1'' Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-10-32-x-1-socket-head-cap-screws.html

Dubro 10-32 x 1" Socket Head Cap Screws

Packages of 4. Black Oxide plated.

Price: $1.21 Special Price: $0.91

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2 x 1/2 Button Head Metal Screws]]> http://www.hobbypeople.net/index.php/dubro-2-x-1-2-button-head-metal-screws.html Dubro 2 x 1/2 Button Head Metal Screws

This new design is by far the best way to mount servos, cowls, landing gear, etc. The large head of the screw acts as a washer and they also have a socket head for easy, no slip installation. Bright Zinc plated with clear chromate.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2 x 3/8 Button Head Sheet Metal Screws]]> http://www.hobbypeople.net/index.php/dubro-2-x-3-8-button-head-sheet-metal-screws.html Dubro 2 x 3/8 Button Head Sheet Metal Screws

This new design is by far the best way to mount servos, cowls, landing gear, etc. The large head of the screw acts as a washer and they also have a socket head for easy, no slip installation. Bright Zinc plated with clear chromate.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2'' Micro Lite Wheels]]> http://www.hobbypeople.net/index.php/dubro-2-micro-lite-wheels.html

Dubro 2" Micro Lite Wheels

DuBro's new Micro Lite Wheels are available in 3 sizes: 1-1/2" (38mm), 2" (51mm) and 2-1/2" (64mm). They feature a one piece design, with polished spokes and flat black wheel (no O-Rings to come off rim). Comes complete with 2 sets of wheel retainers, a wide axle hub for a true running wheel. Perfect for indoor and park flyers. 1 pair/pkg.

Price: $3.52 Special Price: $2.64

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2'' Smooth Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-2-smooth-wheels-2.html

Price: $5.57 Special Price: $4.18

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2'' Treaded Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-2-treaded-wheels-2.html Dubro 2" Treaded Wheels (2)

These wheels take a 1/8 Axle (3mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass & paved runways.

Price: $5.57 Special Price: $4.18

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-1/2'' Micro Lite Wheels]]> http://www.hobbypeople.net/index.php/dubro-2-1-2-micro-lite-wheels.html Dubro 2-1/2" Micro Lite Wheels

DuBro's new Micro Lite Wheels are available in 3 sizes: 1-1/2" (38mm), 2" (51mm) and 2-1/2" (64mm). They feature a one piece design, with polished spokes and flat black wheel (no O-Rings to come off rim). Comes complete with 2 sets of wheel retainers, a wide axle hub for a true running wheel. Perfect for indoor and park flyers.

Price: $3.78 Special Price: $2.84

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-1/2'' Smooth Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-2-1-2-smooth-wheels-2.html Dubro 2-1/2" Smooth Wheels (2)

These wheels takes a 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass & paved runways.

Price: $6.30 Special Price: $4.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-1/2'' Treaded Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-2-1-2-treaded-wheels-2.html Dubro 2-1/2" Treaded Wheels (2)

These wheels take a 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass & paved runways.

Price: $6.30 Special Price: $4.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-1/4'' Smooth Wheels (2)]]> http://www.hobbypeople.net/index.php/2-1-4-smooth-wheels-2.html

 

Price: $5.99 Special Price: $4.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-1/4'' Treaded Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-2-1-4-treaded-wheels-2.html Dubro 2-1/4" Treaded Wheels (2) These wheels take a 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass & paved runways.

Price: $5.99 Special Price: $4.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-3/4'' Smooth Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-2-3-4-smooth-wheels-2.html

Dubro 2-3/4" Smooth Wheels (2) 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass & paved runways.

Price: $6.62 Special Price: $4.97

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-3/4'' Treaded Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-2-3-4-treaded-wheels-2.html Dubro 2-3/4" Treaded Wheels (2) 5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass & paved runways.

Price: $6.62 Special Price: $4.97

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-56 Ball Links w/Hardware (2)]]> http://www.hobbypeople.net/index.php/dubro-2-56-ball-links-w-hardware-2.html

Dubro 2-56 Ball Links w/Hardware (2)

This is a 2-56 Swivel Ball Link Set with Hardware.

Price: $3.78 Special Price: $2.84

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-56 Lock Nuts (4)]]> http://www.hobbypeople.net/index.php/dubro-2-56-lock-nuts-4.html Dubro 2-56 Lock Nuts (4)

Zinc plated, aircraft quality, nylon insert lock nuts.

Price: $1.05 Special Price: $0.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-56 Safety Lock Kwik-Links (2)]]> http://www.hobbypeople.net/index.php/dubro-2-56-safety-lock-kwik-links-2.html

Dubro 2-56 Safety Lock Kwik-Links (2)

The Safety Lock Kwik-Link offers everything a modeler could wantin a clevis and more. Simply put, it's ingenious, a grandslam!
Features

  • Self tapping - leaving no slop on threads.

  • Square shank for easy installation & adjustment.

  • Brass plated stepped steel pin - no binding on control horns or servo arms.

  • Brass plated steel safety lock

Ideal for upgrading or replacement on A.R.F.'s. Super strong, super tough. More strength then you'll ever need. 10% lighter than steel clevis'. Size stamped on safety lock for positive identification.

Price: $2.31 Special Price: $1.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-56 Solder Kwik-Links - Bulk Pack]]> http://www.hobbypeople.net/index.php/dubro-2-56-solder-kwik-links-bulk-pack.html

Dubro 2-56 Solder Kwik-Links - Bulk Pack

Solder Kwik-Links are nickel plated making a strong, attractive and easy to solder connector for servo or horn. 2-56 Solder Kwik-Link designed for use with .072 diameter wire, link guards included.

Price: $7.14 Special Price: $5.36

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-56 Steel Hex Nuts]]> http://www.hobbypeople.net/index.php/dubro-2-56-steel-hex-nuts.html

Dubro 2-56 Steel Hex Nuts

Zinc Plated!

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-56 Steel Kwik-Links - Bulk Pack]]> http://www.hobbypeople.net/index.php/dubro-2-56-steel-kwik-links-bulk-pack.html Dubro 2-56 Steel Kwik-Links - Bulk Pack

Spring Steel Kwik-Links are the tried and true top quality Kwik-Link. Ideal for control linkage hook-up. Use with threaded rods or threaded couplers. 2-56 are for use with .072 dia wire, link guards included.

Price: $7.14 Special Price: $5.36

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-56 x 1/2'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-2-56-x-1-2-socket-head-cap-screws-4.html Dubro 2-56 x 1/2" Socket Head Cap Screws (4)

Packages of 4. Black Oxide plated.

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-56 x 1/2'' Swivel Ball Link]]> http://www.hobbypeople.net/index.php/dubro-2-56-x-1-2-swivel-ball-link.html

 

Price: $3.78 Special Price: $2.84

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-56 x 1/4''Socket Head Cap Screws - (4)]]> http://www.hobbypeople.net/index.php/dubro-2-56-x-1-4-socket-head-cap-screws-4.html Dubro 2-56 x 1/4"Socket Head Cap Screws - (4)

Packages of 4. Black Oxide plated.

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-56 x 12'' Threaded Rods (6)]]> http://www.hobbypeople.net/index.php/dubro-2-56-x-12-threaded-rods-6.html

Dubro 2-56 x 12" Threaded Rods (6)

Can be used in conjunction with nylon or steel Kwik-links or with ball links where extra long pushrods are needed. Bendable and strong. Rods are available with 3/4 (19mm) thread on one end.

Price: $3.41 Special Price: $2.56

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2-56 x 3/4'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-2-56-x-3-4-socket-head-cap-screws-4.html Dubro 2-56 x 3/4" Socket Head Cap Screws (4)

Packages of 4. Black Oxide plated.

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2.5mm Flat Washers (8)]]> http://www.hobbypeople.net/index.php/dubro-2-5mm-flat-washers-8.html

Dubro 2.5mm Flat Washers (8)

Dubro Washers are available in both flat and split styles. Use the flat washersfor spacers or to keep your scres head from pulling through soft materials. Thesplit washers help keep a screw from backing out due to vibration.

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2.5mm Hex Nuts (4)]]> http://www.hobbypeople.net/index.php/dubro-2-5mm-hex-nuts-4.html Dubro 2.5mm Hex Nuts (4)

These are 2.5mm Hex Nuts from Du-Bro's Car Line (Metric).

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2.5x10mm Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-2-5x10mm-socket-head-cap-screws.html Dubro 2.5x10mm Socket Head Cap Screws

Dubro Socket Head Cap Screws are ideal for areas where a screwdriver won'treach. They can be tighteded with an allen wrench or ball driver. The screwscome in a variety of diameters and lengths. This also uses a 1.5mm balldriver.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2.5x15mm Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-2-5x15mm-socket-head-cap-screws.html

Dubro 2.5x15mm Socket Head Cap Screws

Dubro Socket Head Cap Screws are ideal for areas where a screwdriver won'treach. They can be tighteded with an allen wrench or ball driver. The screwscome in a variety of diameters and lengths. This also uses a 1.5mm balldriver.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2.5x6mm Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-2-5x6mm-socket-head-cap-screws.html Dubro 2.5x6mm Socket Head Cap Screws

Dubro Socket Head Cap Screws are ideal for areas where a screwdriver won'treach. They can be tighteded with an allen wrench or ball driver. The screwscome in a variety of diameters and lengths. This also uses a 1.5mm balldriver.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2mm Hex Nuts (4)]]> http://www.hobbypeople.net/index.php/dubro-2mm-hex-nuts-4.html Dubro 2mm Hex Nuts (4)

These are 2mm Hex Nuts from Du-Bro's Car Line (Metric).

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2mm Nylon Kwik-Links]]> http://www.hobbypeople.net/index.php/dubro-2mm-nylon-kwik-links.html Dubro 2mm Nylon Kwik-Links

These sure-lock Nylon Kwik-Links are self threading nylon for 2MM rods or threaded couplers. Ideal for replacements on imported A.R.F.'s and kits.

Price: $1.05 Special Price: $0.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2mm Safety Lock Kwik-Link 2 / Pkg]]> http://www.hobbypeople.net/index.php/2mm-safety-lock-kwik-link-2-pkg.html

877789 2mm Safety Lock Kwik-Link 2 / Pkg

Price: $2.31 Special Price: $1.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2x10mm Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-2x10mm-socket-head-cap-screws.html Dubro 2x10mm Socket Head Cap Screws

Dubro Socket Head Cap Screws are ideal for areas where a screwdriver won'treach. They can be tighteded with an allen wrench or ball driver. The screwscome in a variety of diameters and lengths. This also uses a 1.5mm balldriver.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 2x12mm Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-2x12mm-socket-head-cap-screws.html Dubro 2x12mm Socket Head Cap Screws

Dubro Socket Head Cap Screws are ideal for areas where a screwdriver won'treach. They can be tighteded with an allen wrench or ball driver. The screwscome in a variety of diameters and lengths. This also uses a 1.5mm balldriver.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3'' Micro Sport Wheels]]> http://www.hobbypeople.net/index.php/dubro-3-micro-sport-wheels.html Dubro 3" Micro Sport Wheels These open spoke wheels will add a sporty look to your model. They have been designed with indoor and park flyer models in mind. 2/pkg. [Wheel Dia. = 3.00" (79.4mm) / Axle Dia. = .078" (2.0mm) / Weight = 11 grams/ea]

Price: $5.20 Special Price: $3.90

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3'' Treaded Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-3-treaded-wheels-2.html

Dubro 3" Treaded Wheels (2)

5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass & paved runways.

Price: $6.83 Special Price: $5.12

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3-1/2'' Treaded Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-3-1-2-treaded-wheels-2.html

Dubro 3-1/2" Treaded Wheels (2)

5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass & paved runways.

Price: $7.66 Special Price: $5.75

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3-1/4'' Treaded Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-3-1-4-treaded-wheels-2.html Dubro 3-1/4" Treaded Wheels (2)

5/32 Axle (4mm). Du-Bro's low bounce captive air wheels have flown on more airplanes over the years than any other wheels on the market! The wall thickness is consistent throughout the wheel giving you a balanced tire. Comes complete with a sporty nylon metallic hub. Works well on grass & paved runways.

Price: $7.35 Special Price: $5.51

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3/16'' Dura-Collars - Bulk Pack]]> http://www.hobbypeople.net/index.php/dubro-3-16-dura-collars-bulk-pack.html

Dubro 3/16" Dura-Collars - Bulk Pack

Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench.

Price: $5.15 Special Price: $3.86

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3/32'' Dura-Collars - Bulk Pack]]> http://www.hobbypeople.net/index.php/dubro-3-32-dura-collars-bulk-pack.html Dubro 3/32" Dura-Collars - Bulk Pack

Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench.

Price: $5.15 Special Price: $3.86

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3/4 Tailwheel]]> http://www.hobbypeople.net/index.php/dubro-3-4-tailwheel.html Dubro 3/4 Tailwheel

This 3/4 tailwheel takes a 1/16 Axle (2mm). Du-Bro Tailwheels are sporty looking and have a machined one piece aluminum hub.

Price: $2.36 Special Price: $1.77

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 30'' Mini Pushrod System .062'']]> http://www.hobbypeople.net/index.php/30-mini-pushrod-system-062.html

 

Price: $7.56 Special Price: $5.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 30'' Pushrod Housing]]> http://www.hobbypeople.net/index.php/dubro-30-pushrod-housing.html Dubro 30" Pushrod Housing

This pushrod housing can be used with 2mm, 2-56, and 4-40 pushrods. (For you with technical dimension questions----.187 od x .120 id x 30 long.)

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 36 Flex Cable]]> http://www.hobbypeople.net/index.php/dubro-36-flex-cable.html Dubro 36 Flex Cable

Price: $4.31 Special Price: $3.23

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 36'' Lazer Rod Pushrods]]> http://www.hobbypeople.net/index.php/dubro-36-lazer-rod-pushrods.html Dubro 36" Lazer Rod Pushrods

Using a highly controlled process, Du-Bro has devised a way to stabilize the Push Rod material so that neither heat nor cold has much effect on trim settings. In fact, in Du-Bro's tests, they found less growth or shrinkage than any plastic pushrod on the market. The red outer housing has 6 contact point giving the inner push rod a smooth positive control. Inner pushrod is translucent in color to better match your color scheme and give your model a more realistic look. 4 threaded rod slides inside inner pushrod to give a stiffer exit to control horn. Includes all hardware.

Price: $5.78 Special Price: $4.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3mm Flat Washers (8)]]> http://www.hobbypeople.net/index.php/dubro-3mm-flat-washers-8.html Dubro 3mm Flat Washers (8)

Dubro Washers are available in both flat and split styles. Use the flat washersfor spacers or to keep your scres head from pulling through soft materials. Thesplit washers help keep a screw from backing out due to vibration.

Price: $0.99 Special Price: $0.74

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3mm Hex Nuts (4)]]> http://www.hobbypeople.net/index.php/dubro-3mm-hex-nuts-4.html Dubro 3mm Hex Nuts (4)

These are 3mm Hex Nuts from Du-Bro's Car Line (Metric).

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3mm Lock Nuts (4)]]> http://www.hobbypeople.net/index.php/dubro-3mm-lock-nuts-4.html Dubro 3mm Lock Nuts (4)

These are Du-Bro 3MM Nylon Insert Lock Nuts

Price: $1.16 Special Price: $0.87

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3x10mm Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-3x10mm-socket-head-cap-screws.html Dubro 3x10mm Socket Head Cap Screws

These are 3x10mm Socket Head Cap Screws

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3x15mm Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-3x15mm-socket-head-cap-screws.html Dubro 3x15mm Socket Head Cap Screws

These are 3x15mm Socket Head Cap Screws

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3x18mm Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-3x18mm-socket-head-cap-screws.html Dubro 3x18mm Socket Head Cap Screws

These are 3x18mm Socket Head Cap Screws

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3x20mm Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-3x20mm-socket-head-cap-screws.html Dubro 3x20mm Socket Head Cap Screws

These are 3x20mm Socket Head Cap Screws

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3x30mm Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-3x30mm-socket-head-cap-screws.html Dubro 3x30mm Socket Head Cap Screws

These are 3x30mm Socket Head Cap Screws

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3x3mm Socket Set Screws]]> http://www.hobbypeople.net/index.php/dubro-3x3mm-socket-set-screws.html Dubro 3x3mm Socket Set Screws

These are 3mmx3 Socket Set Screws from Du-Bro's Car Line.

Price: $1.47 Special Price: $1.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3x50mm SHCS (4 pc)]]> http://www.hobbypeople.net/index.php/dubro-3x50mm-shcs-4-pc.html

Dubro 3x50mm SHCS (4 pc) 3.0mm x 50 Socket Head Cap Screws 4/pkg.

Price: $1.89 Special Price: $1.42

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3x6mm Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-3x6mm-socket-head-cap-screws.html Dubro 3x6mm Socket Head Cap Screws

These are 3x6mm Socket Head Cap Screws

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 3x8mm Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-3x8mm-socket-head-cap-screws.html Dubro 3x8mm Socket Head Cap Screws

These are 3x8mm Socket Head Cap Screws

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4 Way Socket Wrench XL]]> http://www.hobbypeople.net/index.php/dubro-4-way-socket-wrench-xl.html

Dubro 4-Way Socket Wrench XL

This is a Dubro 4-Way Socket Wrench XL. Dubro's 4-Way Socket Wrench offers modelers a quality socket wrench at an affordable price. This wrench will accommodate both American and Metric sizes (5/16, 3/8, 7/16, 1/2, 8mm, 10mm, 11mm, 12mm). Also features 3 built-in glow plug holders and special retaining clip. Storage Klip mounts securely to field box keeping 4-way wrench readily accessible. Comes complete with mounting screws for storage klip. 1 wrench and klip per package.

Price: $8.71 Special Price: $6.53

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4 x 3/4 Button Head Metal Screws]]> http://www.hobbypeople.net/index.php/4-x-3-4-button-head-metal-screws.html

868749 4 x 3/4 Button Head Metal Screws

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4'' Treaded Lite Wheel (1)]]> http://www.hobbypeople.net/index.php/dubro-4-treaded-lite-wheel-1.html

Dubro 4" Threaded Lightweight Wheel

This is a Dubro 4" Threaded Lightweight Wheel. Our Large Scale Treaded Lightweight wheels are substantially lighter than other aircraft wheels available. These lightweight wheels feature a foam interior yet have a tough and rugged exterior skin for durability. Excellent for paved runways! Hubs come with 3/16" (5mm) axle diameter opening and can be drilled out to 1/4".

Features and Specifications:

• Diameter: 5" (127mm)

• Width: 1.150" (29.21mm)

• Axle Diameter: 3/16" (5mm)

• Includes One Wheel

Price: $15.49 Special Price: $11.62

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-1/2'' Big Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-4-1-2-big-wheels-2.html

Dubro 4-1/2" Big Wheels (2)

This is a pair of Dubro 4-1/2" Big Wheels. Smooth inflatable tires with positive seal air valves. Features two piece bolt together hubs and hub caps. Wheels can be inflated (or deflated) thru a tiny valve in the side of the tire. Axle diameter size is 5/32 (4mm).

Features:

• Smooth Thread Design

• Inflatable with Positive Seal Air Valves

• Two-Piece Bolt-Together Hubs and Hub Caps

Specifications:

• Diameter: 4.5 Inches (114.3mm)

• Width: 1.7 Inches (43.2mm)

• Axle Diameter: 5/32 Inch (4mm)

Price: $19.99 Special Price: $14.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 All-Thread Stainless 12'' (1 Pc)]]> http://www.hobbypeople.net/index.php/dubro-4-40-all-thread-stainless.html

Dubro 4-40 All-Thread (Stainless)

Fully Threaded Rods are stainless steel and perfect for making custom lengths to the size you need.

Price: $1.68 Special Price: $1.26

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Ball Link HD]]> http://www.hobbypeople.net/index.php/dubro-heavy-duty-4-40-ball-link.html

Dubro Heavy Duty 4-40 Ball Link

3 piece set, 4-40 threaded ball, and self-threading socket for 4-40 wire, 4-40 lock nut. 1/pkg.

Price: $2.63 Special Price: $1.97

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Heavy Duty Ball Links (2)]]> http://www.hobbypeople.net/index.php/dubro-4-40-heavy-duty-ball-links-2.html Dubro 4-40 Heavy Duty Ball Links (2)

Dubro Racing 4-40 Heavy Duty Ball Link

Includes:

  • (2) 4-40 Socket Head Cap Screw
  • (2) 4-40 Self Threading Shank
  • (2) Spacers
  • (2) Nuts

Price: $4.57 Special Price: $3.43

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Heavy Duty Ball Links (2)]]> http://www.hobbypeople.net/index.php/dubro-4-40-heavy-duty-ball-links-907.html

 

Price: $4.57 Special Price: $3.43

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Kwik Link w/12 inch Rod]]> http://www.hobbypeople.net/index.php/dubro-4-40-kwik-link-w-12-inch-rod.html

Dubro 4-40 Kwik Link w/12 inch Rod

Complete assembly for any control linkage. Allows easy removal for on-the-field adjustments. Features 12 long .093 diameter rod with 3/4 4-40 thread one end and our 4-40 Spring Steel Kwik Link and Spring Keeper.

Price: $1.37 Special Price: $1.03

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Lock Nuts (4)]]> http://www.hobbypeople.net/index.php/dubro-4-40-lock-nuts-4.html Dubro 4-40 Lock Nuts (4)

Zinc plated, aircraft quality, nylon insert lock nuts.

Price: $1.05 Special Price: $0.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Monster Ball Links]]> http://www.hobbypeople.net/index.php/dubro-4-40-monster-ball-links.html

Dubro 4-40 Monster Ball Links

DU-BRO Ball Links offer smooth friction-free operation with unsurpassed quality and durability.

Price: $6.41 Special Price: $4.81

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Safety Lock Kwik-Link]]> http://www.hobbypeople.net/index.php/4-40-safety-lock-kwik-link.html

Dubro 4-40 Safety Lock Kwik-Link

This is a package of Dubro 4-40 Safety Lock Kwik-Links. The Safety Lock Kwik-Link offers everything a modeler could want in a clevis and more. Simply put, it's ingenious - a grandslam!

Features:

• Self Tapping Leaving No slop on Threads

• Square Shank for Easy Installation and Adjustment

• Brass-Plated Stepped Steel Pin

• Won't Bind on Control Horns or Servo Arms

• Brass-Plated Steel Safety Lock Keeps Clevis From Popping Open During Flight

What's Included:

• 14 Dubro 4-40 Safety Lock Kwik-Links

Price: $13.34 Special Price: $10.01

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Safety Lock Kwik-Link 2 / Pkg]]> http://www.hobbypeople.net/index.php/dubro-4-40-safety-lock-kwik-link-2-pkg.html

Dubro 4-40 Safety Lock Kwik-Link 2 / Pkg

The Safety Lock Kwik-Link offers everything a modeler could wantin a clevis and more. Simply put, it's ingenious, a grandslam!
Features

  • Self tapping - leaving no slop on threads.

  • Square shank for easy installation & adjustment.

  • Brass plated stepped steel pin - no binding on control horns or servo arms.

  • Brass plated steel safety lock

Ideal for upgrading or replacement on A.R.F.'s. Super strong, super tough. More strength then you'll ever need. 10% lighter than steel clevis'. Size stamped on safety lock for positive identification.

Price: $2.31 Special Price: $1.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Solder Kwik-Links - Bulk Pack]]> http://www.hobbypeople.net/index.php/dubro-4-40-solder-kwik-links-bulk-pack.html

Dubro 4-40 Solder Kwik-Links - Bulk Pack

Solder Kwik-Links are nickel plated making a strong, attractive and easy to solder connector for servo or horn. 4-40 Solder Kwik-Link designed for use with .093 diameter wire, spring keepers included.

Price: $8.71 Special Price: $6.53

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Steel Hex Nuts]]> http://www.hobbypeople.net/index.php/dubro-4-40-steel-hex-nuts.html Dubro 4-40 Steel Hex Nuts

Zinc Plated!

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Steel Kwik-Links (2)]]> http://www.hobbypeople.net/index.php/dubro-4-40-steel-kwik-links-2.html Dubro 4-40 Steel Kwik-Links (2)

Spring Steel Kwik-Links are the tried and true top quality Kwik-Link. Ideal for control linkage hook-up. Use with threaded rods or threaded couplers. 4-40 are for use with .093 dia wire, spring keepers are included.

Price: $1.89 Special Price: $1.42

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Steel Kwik-Links - Bulk Pack]]> http://www.hobbypeople.net/index.php/dubro-4-40-steel-kwik-links-bulk-pack.html Dubro 4-40 Steel Kwik-Links - Bulk Pack

Spring Steel Kwik-Links are the tried and true top quality Kwik-Link. Ideal for control linkage hook-up. Use with threaded rods or threaded couplers. 4-40 are for use with .093 diameter wire, spring keepers are included.

Price: $8.71 Special Price: $6.53

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Steel Solder Rod Ends (2)]]> http://www.hobbypeople.net/index.php/4-40-steel-solder-rod-ends-2.html

866625 4-40 Steel Solder Rod Ends (2)

Price: $4.35 Special Price: $3.26

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Swivel Ball Link (2)]]> http://www.hobbypeople.net/index.php/dubro-4-40-swivel-ball-link-2.html Dubro 4-40 Swivel Ball Link (2)

This is a swivel ball link made to fit 4-40 threaded rods and is mostcommonly used for tie rods on cars. It is plastic with a burnished brass swivelball for smooth friction-free action. The hardware is included and they come2/pkg.

Price: $3.78 Special Price: $2.84

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Swivel Ball Links]]> http://www.hobbypeople.net/index.php/dubro-4-40-swivel-ball-links.html Dubro 4-40 Swivel Ball Links

These high quality ball links feature burnished brass swivel balls for smooth operation. Complete with socket head cap screw, shim, and hex nut.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Swivel Ball Links]]> http://www.hobbypeople.net/index.php/dubro-4-40-swivel-ball-links-46766.html

Fits a 4-40 turnbuckle or rod with a 4-40 X 5/8" screw size. 12/pkg.

Price: $18.48 Special Price: $13.86

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 Threaded Coupler]]> http://www.hobbypeople.net/index.php/dubro-4-40-threaded-coupler.html Dubro 4-40 Threaded Coupler

Machined out of steel for maximum strength. Thread length is 5/8 (15.8mm) long with an overall length of 1 1/2. Nickel plated for easy soldering.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 x 1'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-4-40-x-1-socket-head-cap-screws-4.html Dubro 4-40 x 1" Socket Head Cap Screws (4)

Packages of 4. Black Oxide plated.

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 x 1-1/2'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-4-40-x-1-1-2-socket-head-cap-screws-4.html

Dubro 4-40 x 1-1/2" Socket Head Cap Screws (4)

Packages of 4. Black Oxide plated.

Price: $1.37 Special Price: $1.03

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 x 1-1/4'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-4-40-x-1-1-4-socket-head-cap-screws-4.html Dubro 4-40 x 1-1/4" Socket Head Cap Screws (4)

Packages of 4. Black Oxide plated.

Price: $1.26 Special Price: $0.95

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 x 1/2'' Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-4-40-x-1-2-socket-head-cap-screws.html

Dubro 4-40 x 1/2" Socket Head Cap Screws

Packages of 4. Black Oxide plated.

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 x 1/4'' Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-4-40-x-1-4-socket-head-cap-screws.html Dubro 4-40 x 1/4" Socket Head Cap Screws

Packages of 4. Black Oxide plated.

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 x 12'' Threaded Rods (Qty 6)]]> http://www.hobbypeople.net/index.php/dubro-4-40-x-12-threaded-rods-qty-6.html Dubro 4-40 x 12" Threaded Rods qty (6)

Can be used in conjunction with nylon or steel Kwik-links or with ball links where extra long pushrods are needed. Bendable and strong. Rods are available with 3/4 (19mm) thread on one end.

Price: $3.78 Special Price: $2.84

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 x 3/4'' Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-4-40-x-3-4-socket-head-cap-screws.html

Dubro 4-40 x 3/4" Socket Head Cap Screws

Packages of 4. Black Oxide plated.

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4-40 x 3/8'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/4-40-x-3-8-socket-head-cap-screws-4.html

868958 4-40 x 3/8" Socket Head Cap Screws (4)

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 48 Flex Cable]]> http://www.hobbypeople.net/index.php/dubro-48-flex-cable.html

Dubro 48 Flex Cable

Highly flexible, free running and adjustable at the control horn. Complete assembly includes: 1 each Mini Nylon Kwik-Link, Solder Link, 2-56 Nylon Kwik Link, threaded coupler, 1/16 aircraft cable and housing.

Price: $5.04 Special Price: $3.78

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 48'' 4-40 Threaded Rod .093'' (1)]]> http://www.hobbypeople.net/index.php/dubro-48-1220mm-093-rod-4-40-threaded.html Dubro 48" (1220mm) .093 Rod 4-40 Threaded

48" long (1220mm) .093 rod 4-40 thrd. 24/tube.

Price: $1.79 Special Price: $1.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 48'' Lazer Rod Pushrod]]> http://www.hobbypeople.net/index.php/dubro-48-lazer-rod-pushrod.html Dubro 48" Lazer Rod Pushrod

Using a highly controlled process, Du-Bro has devised a way to stabilize the Push Rod material so that neither heat nor cold has much effect on trim settings. In fact, in Du-Bro's tests, they found less growth or shrinkage than any plastic pushrod on the market. The red outer housing has 6 contact point giving the inner push rod a smooth positive control. Inner pushrod is translucent in color to better match your color scheme and give your model a more realistic look. 4 threaded rod slides inside inner pushrod to give a stiffer exit to control horn. Includes all hardware.

Price: $6.56 Special Price: $4.92

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4mm Flat Washers (8)]]> http://www.hobbypeople.net/index.php/dubro-4mm-flat-washers-8.html Dubro 4mm Flat Washers (8)

Dubro Washers are available in both flat and split styles. Use the flat washersfor spacers or to keep your scres head from pulling through soft materials. Thesplit washers help keep a screw from backing out due to vibration.

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4mm Lock Nuts (4)]]> http://www.hobbypeople.net/index.php/dubro-4mm-lock-nuts-4.html Dubro 4mm Lock Nuts (4)

Zinc plated, aircraft quality, nylon insert lock nuts.

Price: $1.16 Special Price: $0.87

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4x12mm Button Head Metal Screws]]> http://www.hobbypeople.net/index.php/dubro-4x12mm-button-head-metal-screws.html Dubro 4x12mm Button Head Metal Screws

This new design is by far the best way to mount servos, cowls, landing gear, etc. The large head of the screw acts as a washer and they also have a socket head for easy, no slip installation. Bright Zinc plated with clear chromate.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 4x4mm Socket Set Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-4x4mm-socket-set-screws-4.html

Dubro 4x4mm Socket Set Screws (4)

These are 4mmx4 Socket Set Screws from Du-Bro's Car Line.

Price: $1.47 Special Price: $1.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 5 Nylon Kwik Links w/12 in 2-56 Rod]]> http://www.hobbypeople.net/index.php/dubro-5-nylon-kwik-links-w-12-in-2-56-rod.html Dubro 5 Nylon Kwik Links w/12 in 2-56 Rod

Features Du-Bro Nylon Kwik Link on a .072 diameter 12 rod with 3/4 2-56 thread on one end.

Price: $3.78 Special Price: $2.84

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 5 Steel Kwik Links w/12 in 2-56 Rod]]> http://www.hobbypeople.net/index.php/dubro-5-steel-kwik-links-w-12-in-2-56-rod.html Dubro 5 Steel Kwik Links w/12 in 2-56 Rod

Complete assembly for any control linkage. Allows easy removal for on-the-field adjustments. Features 12 long .072 diameter rod with 3/4 2-56 thread one end and our 2-56 Spring Steel Kwik Link.

Price: $4.83 Special Price: $3.62

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 5'' Big Wheels (2)]]> http://www.hobbypeople.net/index.php/dubro-5-big-wheels-2.html

 

Price: $22.99 Special Price: $17.24

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 5/32'' Dura-Collars - Bulk Pack]]> http://www.hobbypeople.net/index.php/dubro-5-32-dura-collars-bulk-pack.html Dubro 5/32" Dura-Collars - Bulk Pack

Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench.

Price: $5.15 Special Price: $3.86

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 6 x 1/2 Button Head Metal Screws (8)]]> http://www.hobbypeople.net/index.php/6-x-1-2-button-head-metal-screws-8.html

868751 6 x 1/2 Button Head Metal Screws (8)

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 6 x 3/4 Button Head Sheet Metal Screws (8)]]> http://www.hobbypeople.net/index.php/dubro-6-x-3-4-button-head-sheet-metal-screws-8.html

Price: $1.99 Special Price: $1.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 6-32 Lock Nuts (4)]]> http://www.hobbypeople.net/index.php/dubro-6-32-lock-nuts-4.html Dubro 6-32 Lock Nuts (4)

Zinc plated, aircraft quality, nylon insert lock nuts.

Price: $1.05 Special Price: $0.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 6-32 x 1'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-6-32-x-1-socket-head-cap-screws-4.html

Dubro 6-32 x 1" Socket Head Cap Screws (4)

Packages of 4. Black Oxide plated.

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 6-32 x 1-1/2'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-6-32-x-1-1-2-socket-head-cap-screws-4.html

Dubro 6-32 x 1-1/2" Socket Head Cap Screws (4)

Packages of 4. Black Oxide plated.

Price: $1.37 Special Price: $1.03

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 6-32 x 1-1/4'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-6-32-x-1-1-4-socket-head-cap-screws-4.html Dubro 6-32 x 1-1/4" Socket Head Cap Screws (4)

Packages of 4. Black Oxide plated.

Price: $1.26 Special Price: $0.95

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 6-32 x 1/2'' Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-6-32-x-1-2-socket-head-cap-screws.html

Dubro 6-32 x 1/2" Socket Head Cap Screws

Packages of 4. Black Oxide plated.

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 6-32 x 3/4'' Socket Head Cap Screws]]> http://www.hobbypeople.net/index.php/dubro-6-32-x-3-4-socket-head-cap-screws.html

Dubro 6-32 x 3/4" Socket Head Cap Screws

Packages of 4. Black Oxide plated.

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 8-32 Blind Nuts (Qty/Pkg: 4)]]> http://www.hobbypeople.net/index.php/8-32-blind-nuts-qty-pkg-4.html

866905 8-32 Blind Nuts (Qty/Pkg: 4)

Price: $1.21 Special Price: $0.91

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 8-32 Nylon Insert Lock Nuts]]> http://www.hobbypeople.net/index.php/dubro-8-32-nylon-insert-lock-nuts.html Dubro 8-32 Nylon Insert Lock Nuts

Zinc plated, aircraft quality, nylon insert lock nuts.

Price: $1.05 Special Price: $0.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 8-32 Pressure Fitting]]> http://www.hobbypeople.net/index.php/dubro-8-32-pressure-fitting.html

Dubro 8-32 Pressure Fitting

Includes brass pressure fitting, nut and fibre washer. Easily mounted anywhere on muffler by drilling a hole and bolting it or tap smaller hole.

Price: $2.00 Special Price: $1.50

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 8-32 x 1'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-8-32-x-1-socket-head-cap-screws-4.html

Dubro 8-32 x 1" Socket Head Cap Screws (4)

Packages of 4. Black Oxide plated.

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 8-32 x 1-1/2'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-8-32-x-1-1-2-socket-head-cap-screws-4.html

Price: $1.68 Special Price: $1.26

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 8-32 x 1-1/4'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-8-32-x-1-1-4-socket-head-cap-screws-4.html Dubro 8-32 x 1-1/4" Socket Head Cap Screws (4)

Packages of 4. Black Oxide plated.

Price: $1.26 Special Price: $0.95

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro 8-32 x 3/4'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-8-32-x-3-4-socket-head-cap-screws-4.html

 

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Antenna Caps w/Silicone]]> http://www.hobbypeople.net/index.php/dubro-antenna-caps-w-silicone.html

Dubro Antenna Caps w/Silicone

This is an Antenna Cap Set from Dubro. It finishes off the top of an antenna tube for a professional look. It also keeps the antenna wire in place.

Includes:

  • Two Antenna Caps
  • Two Antenna Collars

 

Features:

  • Rubber construction
  • Fits most standard antenna tubes

 

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Antenna Tube 36'']]> http://www.hobbypeople.net/index.php/dubro-antenna-tube-36.html

Dubro Antenna Tube 36"

Works great for airplanes, cars, boats, and helicopters.

Price: $1.16 Special Price: $0.87

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Antenna Tube w/Cap Black]]> http://www.hobbypeople.net/index.php/dubro-antenna-tube-w-cap-black.html

Dubro Antenna Tube w/Cap Black

This is a standard replacement Antenna Tube with Cap from Dubro This item can be used anywhere an antenna tube is needed to support a receiver antenna wire.

Includes:

  • One antenna tube
  • One antenna tube cap
  • One receiver antenna wire sleeve

 

Price: $1.16 Special Price: $0.87

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Antenna Tube w/Cap Blue]]> http://www.hobbypeople.net/index.php/dubro-antenna-tube-w-cap-blue.html

Dubro Antenna Tube w/Cap Blue

This is a standard replacement Antenna Tube with Cap from Dubro This item can be used anywhere an antenna tube is needed to support a receiver antenna wire.

Includes:

  • One antenna tube
  • One antenna tube cap
  • One receiver antenna wire sleeve

 

Price: $1.35 Special Price: $1.01

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Antenna Tube w/Cap Purple]]> http://www.hobbypeople.net/index.php/dubro-antenna-tube-w-cap-purple.html

Dubro Antenna Tube w/Cap Purple

This is a standard replacement Antenna Tube with Cap from Dubro. This item can be used anywhere an antenna tube is needed to support a receiver antenna wire.

Includes:

  • One antenna tube
  • One antenna tube cap
  • One receiver antenna wire sleeve

 

Price: $1.16 Special Price: $0.87

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Antenna Tube w/Cap Red]]> http://www.hobbypeople.net/index.php/dubro-antenna-tube-w-cap-red.html

Dubro Antenna Tube w/Cap Red

This is a standard replacement Antenna Tube with Cap from Dubro. This item can be used anywhere an antenna tube is needed to support a receiver antenna wire.

Includes:

  • One antenna tube
  • One antenna tube cap
  • One receiver antenna wire sleeve

 

Price: $1.16 Special Price: $0.87

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Antenna Tube w/Cap White]]> http://www.hobbypeople.net/index.php/dubro-antenna-tube-w-cap-white.html

Dubro Antenna Tube w/Cap White

This is a standard replacement Antenna Tube with Cap from Dubro. This item can be used anywhere an antenna tube is needed to support a receiver antenna wire.

Includes:

  • One antenna tube
  • One antenna tube cap
  • One receiver antenna wire sleeve

 

Price: $1.16 Special Price: $0.87

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Antenna Tube w/Cap Yellow]]> http://www.hobbypeople.net/index.php/dubro-antenna-tube-w-cap-yellow.html

Dubro Antenna Tube w/Cap Yellow

This is a standard replacement Antenna Tube with Cap from Dubro. This item can be used anywhere an antenna tube is needed to support a receiver antenna wire.

Includes:

  • One antenna tube
  • One antenna tube cap
  • One receiver antenna wire sleeve

 

Price: $1.16 Special Price: $0.87

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Axle Shafts 1-1/4x1/8 in (2)]]> http://www.hobbypeople.net/index.php/dubro-axle-shafts-1-1-4x1-8-in-2.html Dubro Axle Shafts 1-1/4x1/8 in (2)

Bolts to any dural landing gear. Easy installation. . Comes complete with nylon insert lock nuts. Spring Steel Zinc Plated.

Price: $6.09 Special Price: $4.57

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Axle Shafts 1-1/4x5/32 in (2)]]> http://www.hobbypeople.net/index.php/dubro-axle-shafts-1-1-4x5-32-in-2.html Dubro Axle Shafts 1-1/4x5/32 in (2)

Bolts to any dural landing gear. Easy installation. Comes complete with nylon insert lock nuts. Spring Steel Zinc Plated.

Price: $6.09 Special Price: $4.57

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Axle Shafts 2x3/16 in (2)]]> http://www.hobbypeople.net/index.php/dubro-axle-shafts-2x3-16-in-2.html

Dubro Axle Shafts (3/16" x 2")

This is a set of two Dubro Axle Shafts (3/16" x 2"). Bolts to any landing gear with a 5/16" hole. Easy installation. Comes complete with nylon insert lock nuts. Spring steel zinc plated for durability.

Price: $6.09 Special Price: $4.57

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Axle Shafts 2x5/32 in (2)]]> http://www.hobbypeople.net/index.php/dubro-axle-shafts-2x5-32-in-2.html

Dubro Axle Shafts 2x5/32 in (2)

Bolts to any dural landing gear. Easy installation. Comes complete with nylon insert lock nuts. Spring Steel Zinc Plated.

Price: $6.09 Special Price: $4.57

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Ball Link 1/16 in Threaded]]> http://www.hobbypeople.net/index.php/dubro-ball-link-1-16-in-threaded.html Dubro Ball Link 1/16 in Threaded

This 4 piece set fits perfectly in servo arm hole, bellcranks, nylon horns, and throttle arms. Set includes (1) ball threaded for 0-80 (1/16 diameter thread), (1) self threading nylon socket, (1) threaded coupler 3/4 long with 3/8 2-56 thread for up to .072 wire.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Ball Link Bolt On]]> http://www.hobbypeople.net/index.php/ball-link-bolt-on.html

 

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Ball Link Threaded 2-56]]> http://www.hobbypeople.net/index.php/dubro-ball-link-threaded-2-56.html Dubro Ball Link Threaded 2-56

5 piece ball link set, excellent for off-set steering, throttle and servo hook-ups. Ball is threaded for 2-56 nut. Threaded coupler 3/4 with 3/8 2-56 thread, for up to .072 wire. Self-threading nylon socket, washer, and 2-56 nut.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Bellcrank - 90 Degree (2)]]> http://www.hobbypeople.net/index.php/dubro-bellcrank-90-degree-2.html

Dubro Bellcrank - 90 Degree (2)

Set includes (2) 90 degree bellcranks with (2)bushings, (2) 4-40 x 3/4 (19mm) screws, (2) lock washers, and (2) hex nuts.

Price: $1.47 Special Price: $1.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Blind Nuts & Bolts - 2-56 x 1/2 (4)]]> http://www.hobbypeople.net/index.php/dubro-blind-nuts-and-bolts-2-56-x-1-2-4.html Dubro Blind Nuts & Bolts - 2-56 x 1/2 (4)

For mounting engines. Includes 4 each of bolts, flat washers, lock washers, and blind nuts.

Price: $1.68 Special Price: $1.26

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Blind Nuts & Bolts - 4-40 x 1 (4)]]> http://www.hobbypeople.net/index.php/dubro-blind-nuts-and-bolts-4-40-x-1-4.html

Dubro Blind Nuts & Bolts - 4-40 x 1 (4)

For mounting engines. Includes 4 each of bolts, flat washer, lock washers, and blind nuts, plus one allen wrench. High strength steel.

Price: $2.42 Special Price: $1.82

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Blind Nuts & Bolts - 4-40 x 1-1/4 (4)]]> http://www.hobbypeople.net/index.php/dubro-blind-nuts-and-bolts-4-40-x-1-1-4-4.html Dubro Blind Nuts & Bolts - 4-40 x 1-1/4 (4)

For mounting enignes. Includes 4 each of bolts, flat washers, lock washers, and blind nuts.

Price: $1.79 Special Price: $1.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Blind Nuts & Bolts - 6-32 x 1 (4)]]> http://www.hobbypeople.net/index.php/dubro-blind-nuts-and-bolts-6-32-x-1-4.html

Dubro Blind Nuts & Bolts - 6-32 x 1 (4)

For mounting enignes. Includes 4 each of bolts, flat washers, lock washers, and blind nuts.

Price: $2.42 Special Price: $1.82

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Blind Nuts - 10-32]]> http://www.hobbypeople.net/index.php/dubro-blind-nuts-10-32.html

Dubro Blind Nuts - 10-32

Used for mounting engines, landing gear, cowls, hatches, etc. The perfect mounting nut for hard to reach areas. Zinc plated.

Price: $1.16 Special Price: $0.87

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Blind Nuts - 2-56 (4)]]> http://www.hobbypeople.net/index.php/dubro-blind-nuts-2-56-4.html Dubro Blind Nuts - 2-56 (4)

Du-Bro's permanent mount blind nuts are available in 7 sizes. Used for mounting engines, landing gear, cowls, hatches, etc. The perfect mounting nut for hard to reach areas. Zinc plated.

Price: $0.99 Special Price: $0.74

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Blind Nuts - 4-40 (4 Pc)]]> http://www.hobbypeople.net/index.php/dubro-blind-nuts-4-40-4-pc.html Dubro Blind Nuts - 4-40 (4 Pc)

Du-Bro's permanent mount blind nuts are available in 7 sizes. Used for mounting engines, landing gear, cowls, hatches, etc. The perfect mounting nut for hard to reach areas. Zinc plated.

Price: $0.99 Special Price: $0.74

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Blind Nuts - 4-40 Bulk Pack (24)]]> http://www.hobbypeople.net/index.php/dubro-blind-nuts-4-40-bulk-pack-24.html

Dubro Blind Nuts - 4-40 Bulk Pack (24)

Used for mounting engines, landing gear, cowls, hatches, etc. The perfect mounting nut for hard to reach areas. Zinc plated.

Price: $4.35 Special Price: $3.26

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Blind Nuts - 6-32 (4 Pc)]]> http://www.hobbypeople.net/index.php/dubro-blind-nuts-6-32-4-pc.html Dubro Blind Nuts - 6-32 (4 Pc)

Du-Bro's permanent mount blind nuts are available in 7 sizes. Used for mounting engines, landing gear, cowls, hatches, etc. The perfect mounting nut for hard to reach areas. Zinc plated.

Price: $0.99 Special Price: $0.74

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Blind Nuts - 6-32 Bulk Pack (24)]]> http://www.hobbypeople.net/index.php/dubro-blind-nuts-6-32-bulk-pack-24.html Dubro Blind Nuts - 6-32 Bulk Pack (24)

Used for mounting engines, landing gear, cowls, hatches, etc. The perfect mounting nut for hard to reach areas. Zinc plated.

Price: $4.35 Special Price: $3.26

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Body Clip Retainers (2) Red]]> http://www.hobbypeople.net/index.php/body-clip-retainers-2-red.html

 

Price: $4.57 Special Price: $3.43

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Body Klip Retainers (2) Black]]> http://www.hobbypeople.net/index.php/dubro-body-klip-retainers-2-black.html Dubro Body Klip Retainers (2) Black Body Klip Retainers are going to save you an enormous amount of time and frustration. Simple installation by making a small hole in the body, insert the retainer, and attach to your clips. Available in 8 cool colors and also includes a set of small clips and a set of large Body Klips.

Price: $4.57 Special Price: $3.43

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Body Klip Retainers (2) White]]> http://www.hobbypeople.net/index.php/dubro-body-klip-retainers-2-white.html Dubro Body Klip Retainers (2) White Body Klip Retainers are going to save you an enormous amount of time and frustration. Simple installation by making a small hole in the body, insert the retainer, and attach to your clips. Available in 8 cool colors and also includes a set of small clips and a set of large Body Klips.

Price: $4.57 Special Price: $3.43

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Body Reamer & Scissors Set]]> http://www.hobbypeople.net/index.php/dubro-body-reamer-and-scissors-set.html

Dubro Body Reamer & Scissors Set

Two essential tools for the shop are the Body Reamer & Scissors. Whether you are reaming holes for your body posts, antenna, or cutting a custom shape, you need quality equipment.

Price: $14.99 Special Price: $11.24

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Bolt Set 2-56 x 1/2]]> http://www.hobbypeople.net/index.php/dubro-bolt-set-2-56-x-1-2.html Dubro Bolt Set 2-56 x 1/2

Aircraft quality. Includes 4 each of bolts, flat washers and lock nuts. High strength steel.

Price: $1.37 Special Price: $1.03

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Bolt Set 4-40 x 1-1/4]]> http://www.hobbypeople.net/index.php/dubro-bolt-set-4-40-x-1-1-4.html Dubro Bolt Set 4-40 x 1-1/4

Aircraft quality. Includes 4 each of bolts, flat washers and lock nuts. High strength steel.

Price: $1.47 Special Price: $1.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Bolt Sets With Lock Nuts 3-48 x 3/4'']]> http://www.hobbypeople.net/index.php/dubro-bolt-sets-with-lock-nuts-3-48-x-3-4.html

 

Price: $1.37 Special Price: $1.03

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Clevis - Micro For .032 (2)]]> http://www.hobbypeople.net/index.php/dubro-clevis-micro-for-032-2.html Dubro Clevis - Micro For .032 (2)

Micro Clevis comes complete with removable .031 L-shaped clevis pins. The silicone tubing securely holds pin in place.

Includes threaded coupler for .032 wire or .047 with the #921, which can be soldered or glued with cyanoacrylate. Extra pins included in package.

Price: $3.41 Special Price: $2.56

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Clevis Horn System Heavy Duty (10-32) (1 set/pkg)]]> http://www.hobbypeople.net/index.php/dubro-clevis-horn-system-heavy-duty-10-32-1-set-pkg.html

Dubro Heavy Duty 10-32 Clevis Horn System

This is a Dubro Heavy Duty 10-32 Clevis Horn System. A complete mounting system for large aircraft that can be configured as a pull-pull or as two single control horns. Self- adjusting design will mount at 90º to center line of the control surface. This system includes premium socket head bolts which provide a non-slip head while installing horns. The clevis horns include 4-40 heavy duty swivel ball links for "no-slop" precision control.

Features and Specifications:

• Configure for One Pull-Pull System or Two Push- Pull Systems

• Premium 10-32 Socket-Head Bolts

• Heavy Duty Clevis Horns Inlude 4-40 Heavy Duty Swivel Ball Links

• Aluminum Mounting Sleeves and Washers Provide Support

• Includes One Set

Price: $16.95 Special Price: $12.71

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Clunk - Standard]]> http://www.hobbypeople.net/index.php/dubro-clunk-standard.html Dubro Clunk - Standard

Du-Bro Standard and Large Clunks are now available separately. These Clunks weigh 0.26 oz. (Standard), 0.48 oz. (Large) and are Nickel Plated to prevent corrosion. Machined to grip your fuel line securely. 1/pkg.

Price: $1.58 Special Price: $1.19

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Arms - Airtronics HD Asstd Long]]> http://www.hobbypeople.net/index.php/dubro-control-arms-airtronics-hd-asstd-long.html Dubro Control Arms - Airtronics HD Asstd Long

Designed for use in aircraft, car, boat, & helicopter models. Unlike conventional servo arms, they are made of long fiber composites for added strength.

Price: $11.79 Special Price: $8.84

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Arms - Airtronics HD Asstd Standard]]> http://www.hobbypeople.net/index.php/dubro-control-arms-airtronics-hd-asstd-standard.html Dubro Control Arms - Airtronics HD Asstd Standard

Designed for use in aircraft, car, boat, & helicopter models. Unlike conventional servo arms, they are made of long fiber composites for added strength.

Price: $9.66 Special Price: $7.25

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Horn - 1/2A (2)]]> http://www.hobbypeople.net/index.php/dubro-control-horn-1-2a-2.html Dubro Control Horn - 1/2A (2)

Nylon 3/4 long with 4 adjustment positions. Includes 2 control horns centered on base, 2 self threading nut plates and (4) 2-56 x 3/8 screws.

Price: $1.05 Special Price: $0.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Horn - 40-91 Heavy Duty (2)]]> http://www.hobbypeople.net/index.php/dubro-control-horn-40-91-heavy-duty-2.html

Dubro Control Horn - 40-91 Heavy Duty (2)

This system was designed for medium to large aircraft using 2-56 control rods and standard clevises. Bolt is 6-32 X 1 1/2" long. Adjustable horn is 3/4" long.

Price: $7.35 Special Price: $5.51

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Horn - Adjustable (2)]]> http://www.hobbypeople.net/index.php/dubro-control-horn-adjustable-2.html Dubro Control Horn - Adjustable (2)

Du-Bro's adjustable control horn mounts between two molded nylon pads for a strong solid mount. A 1 1/2, 5-40 bolt allows you the full range of height adjustment. Recommended for .60 powered aircraft and smaller.

Price: $2.94 Special Price: $2.21

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Horn - Micro]]> http://www.hobbypeople.net/index.php/dubro-control-horn-micro.html Dubro Control Horn - Micro

DuBro's new Micro Control Horn measures a 1/2" in height and comes with a pin molded on the bottom flat for easy installation and secure gluing. Pin can be trimmed off if not desired. Ideal for indoor and park flyers. 2/pkg."

Price: $1.16 Special Price: $0.87

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Horn - Micro (2)]]> http://www.hobbypeople.net/index.php/dubro-control-horn-micro-2.html Dubro Control Horn - Micro (2)

Control Horn is 5/8 in height and is great for the larger scale micro aircraft

Price: $1.26 Special Price: $0.95

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Horn - Micro Razor (2)]]> http://www.hobbypeople.net/index.php/dubro-control-horn-micro-razor-2.html

Dubro Control Horn - Micro Razor (2) Designed for medium size indoor and park flyer models. This "open frame" design is light but strong. Complete with bottom support plate and two adjustment positions. Overall height: 0.8125" (13/16") 2/pkg. (0.49 grams/ea.)

Price: $1.47 Special Price: $1.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Horn - Nylon (2)]]> http://www.hobbypeople.net/index.php/dubro-control-horn-nylon-2.html

Dubro Control Horn - Nylon (2)

1 1/8 long with 4 adjustment positions. Includes 1 right and 1 left control horn. 2 self threading nut plates and (4) 2-56 x 5/8 screws.

Price: $1.05 Special Price: $0.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Horn - T-Style Large-Scale (2)]]> http://www.hobbypeople.net/index.php/dubro-control-horn-t-style-large-scale-2.html

Dubro Control Horn - T-Style Large-Scale (2)

These large scale T-Style control horns were aerodynamically designed with large scale planes in mind. 1 3/8 long with 4 adjustment positions and 4 mounting holes. Comes complete with back plate and (4) 4-40 x 1 Socket Head Cap Screws.

Price: $2.31 Special Price: $1.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Horn - T-Style Nylon (2)]]> http://www.hobbypeople.net/index.php/dubro-control-horn-t-style-nylon-2.html Dubro Control Horn - T-Style Nylon (2)

1 3/8 Long with 5 adjustment positions. Each set incluees 2 control horns that are center on base, 2 self threading nut plates and (4) 2-56 x 5/8 screws.

Price: $1.05 Special Price: $0.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Horn - T-Style Super Strength (2)]]> http://www.hobbypeople.net/index.php/dubro-control-horn-t-style-super-strength-2.html Dubro Control Horn - T-Style Super Strength (2)

Stronger than conventional nylon control horns, thse aerodynamically designed Super Strong control horns come complete with back plate and 2-56 x 1/2 socket head cap screws for easy installation. 1 3/4 long with 5 adjustment positions.

Price: $1.84 Special Price: $1.38

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Control Horn System - Heavy Duty (2)]]> http://www.hobbypeople.net/index.php/dubro-control-horn-system-heavy-duty-2.html

Dubro Control Horn System - Heavy Duty (2)

Designed with BIG planes in mind! This product has plenty on clearance from the hinge line with 1 5/32

Price: $9.77 Special Price: $7.33

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Double-Sided Tape - Asst'd sheets]]> http://www.hobbypeople.net/index.php/dubro-double-sided-tape-asst-d-sheets.html Dubro Double-Sided Tape - Asst'd sheets

Du-Bro's double sided tape assortment comes in 3 different thicknesses: 1/32 (0.7mm), 1/16 (1.5mm), 1/8 (3mm). Each size is diecut with four 1 (25mm) x 3 (76mm) pieces. (12 square inches) Works great for mounting servos, receivers, speed controls, etc.

Price: $2.84 Special Price: $2.13

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Dura Collar 3/16 (4)]]> http://www.hobbypeople.net/index.php/dubro-dura-collar-3-16-4.html Dubro Dura Collar 3/16 (4)

Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench.

Price: $1.89 Special Price: $1.42

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Dura Collars 1/16 (4)]]> http://www.hobbypeople.net/index.php/dubro-dura-collars-1-16-4.html Dubro Dura Collars 1/16 (4)

Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench.

Price: $1.89 Special Price: $1.42

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Dura Collars 1/4 in]]> http://www.hobbypeople.net/index.php/dubro-dura-collars-1-4-in.html Dubro Dura Collars 1/4 in

Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench

Price: $2.26 Special Price: $1.70

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Dura Collars 1/8 (4)]]> http://www.hobbypeople.net/index.php/dubro-dura-collars-1-8-4.html Dubro Dura Collars 1/8 (4)

Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench.

Price: $1.89 Special Price: $1.42

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Dura Collars 3/32 (4)]]> http://www.hobbypeople.net/index.php/dubro-dura-collars-3-32-4.html Dubro Dura Collars 3/32 (4)

Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench.

Price: $1.89 Special Price: $1.42

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Dura Collars 5/32 (4)]]> http://www.hobbypeople.net/index.php/dubro-dura-collars-5-32-4.html Dubro Dura Collars 5/32 (4)

Enough stock so that threads will not strip and can be reworked for many other uses. Includes set screw and one wrench.

Price: $1.89 Special Price: $1.42

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro E-Z Connectors]]> http://www.hobbypeople.net/index.php/dubro-e-z-connectors.html

Dubro E-Z Connectors

E/Z Connectors come complete with 2 each Connector, 4-40 x 1/8 Slotted Screw, black snap washer, and push on steel washer.

Price: $1.79 Special Price: $1.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro E-Z Connectors .072 Heavy Duty]]> http://www.hobbypeople.net/index.php/dubro-e-z-connectors-072-heavy-duty.html Dubro E-Z Connectors .072 Heavy Duty

Heavy Duty E/Z Connectors come complete with 2 each Steel Connector, 4-40 x 3/16 Socket Head Cap Screw, black snap washer, and push on steel washer.

Price: $2.25 Special Price: $1.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro E-Z Connectors .093 Heavy Duty]]> http://www.hobbypeople.net/index.php/dubro-e-z-connectors-093-heavy-duty.html Dubro E-Z Connectors .093 Heavy Duty

Heavy Duty E/Z Connectors come complete with 2 each Steel Connector, 4-40 x 3/16 Socket Head Cap Screw, and push on steel washer.

Price: $2.31 Special Price: $1.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro E/Z Adjust Axle 1-1/4'' x 5/32'']]> http://www.hobbypeople.net/index.php/dubro-e-z-adjust-axle-1-1-4-x-5-32.html

Dubro E/Z Adjust Axle 1-1/4" x 5/32"

Zinc plated steel. Simply slide axle housing on 5/32 (4mm) nose gear or main wire and tighten with 8-32 set screw. The E/Z Adjust Axles are tightened with a 10-32 set screw. Available in 4 sizes.

Price: $5.67 Special Price: $4.25

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro E/Z Adjust Axle 2'' x 5/32'']]> http://www.hobbypeople.net/index.php/dubro-e-z-adjust-axle-2-x-5-32.html

These Dubro E/Z Adjust Axles are constructed of Zinc plated steel. The axle is 2 inches long and fits onto 5/32" diameter landing gear wire. Each axle is held in place using an 8-32 steel hex screw and each axle assembly is held onto your landing gear wire using a 10-32 hex screw.

*We recommend grinding a flat spot on the axle and your landing gear wire to tighten the hex screws against. This will ensure the parts don't move or turn under pressure.

Price: $5.67 Special Price: $4.25

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro E/Z Bender Wire Forming Tool]]> http://www.hobbypeople.net/index.php/e-z-bender-wire-forming-tool.html

871900 E/Z Bender Wire Forming Tool

Price: $26.20 Special Price: $19.65

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro E/Z Bender Wire Forming Tool #2]]> http://www.hobbypeople.net/index.php/dubro-e-z-bender-wire-forming-tool-2.html

A commercial quality wire bender, built specifically for the hobby industry. This will bend wire from 0-90 degrees and makes perfect Z-Bends, L-Bends & more!
With one movement, the E/Z Bender #2 will form wires to your exact specifications. The E/Z Bender features hardened steel forming dies for long lasting operation. It's design was made to be a perfect addition to the modelers workshop. It can be hand held or easily mounted to your work bench. It also fits perfectly in your bench vise. 1/pkg
The E/Z Bender can be used on pushrods up to .093 (2.35mm) and comes with two forming dies for bending the following wire sizes:

  • Forming Die #1: .062-.072 (1.45mm-1.82mm)
  • Forming Die #2: .072-.093 (1.82mm-2.40mm)
    Note: Do not attempt to bend hardened wire (music wire) with this tool.

Price: $24.79 Special Price: $18.59

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro E/Z Brake For 5/32&4mm Landing Gear W/Dubro Wheel,1Pk]]> http://www.hobbypeople.net/index.php/dubro-e-z-brake-for-5-32-4mm-landing-gear-w-dubro-wheel-1pk.html

Dubro E/Z Brake System

for 5/32 & 4mm Landing Gear w/Dubro 2.5" Wheel

This is a Dubro E/Z Brake System for 5/32 & 4mm Landing Gear w/Dubro 2.5" Wheel. The easily assembled E/Z Brake will function as a main or nose wheel braking system. This can be very useful in take-offs and landings where you need quicker stops and tighter turns. After the simple installation, an aircraft’s receiver can be set up in many ways depending on the pilot’s preference. A common method would be to attach the brake line to the elevator servo and utilize the trim to engage the brake. The tension can be adjusted so the brake can be on or off or to include more of a range allowing partial braking upon taxiing and turning. The E/Z Brake works with 5/32” and 4mm landing gear with the following Dubro wheels 2.25" to 3.5" T, TL, SL, DL and R series.

Features:

• Functions as Main or Nose Wheel Braking System

• Easy to Assemble, Setup and Adjust

• Works with 5/32" and 4mm Landing Gear

• Compatible with 2.25" to 3.5" T, TL, SL, DL and R Series Wheels

What's Included:

• E/Z Brake System

• 2.5" Treaded Lite Wheel

Price: $12.59 Special Price: $9.44

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro E/Z Fill Fueling Valve]]> http://www.hobbypeople.net/index.php/dubro-e-z-fill-fueling-valve.html

Dubro E/Z Fill Fueling Valve The E/Z Fill Fueling Valve makes fueling and de-fueling your model easier than ever! Works with gas & glo fuel and accommodates medium (3/32" ID) fuel tubing. Generally fits models up to 1.20 size. 1/pkg.

Price: $9.40 Special Price: $7.05

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro E/Z Link L-Bend Keeper]]> http://www.hobbypeople.net/index.php/dubro-e-z-link-l-bend-keeper.html Dubro E/Z Link L-Bend Keeper

Snap fit on .072 wire, simply bend 90 degree angle on pushrod and install E/Z Link onto pushrod (No Z/Bend required). Super lightweight design, ideal for all models using .072 pushrods. 4/pkg.

Price: $1.52 Special Price: $1.14

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro E/Z Link L-Bend Keeper - Micro]]> http://www.hobbypeople.net/index.php/dubro-e-z-link-l-bend-keeper-micro.html Dubro E/Z Link L-Bend Keeper - Micro

Snap fit on .032 wire, simply bend 90 degree angle on pushrod and install E/Z Link onto pushrod (No Z/Bend required). Super lightweight design, ideal for indoor and park flyers. 4/pkg.

Price: $1.47 Special Price: $1.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Epoxy Brushes (6)]]> http://www.hobbypeople.net/index.php/dubro-epoxy-brushes-6.html Dubro Epoxy Brushes (6)

A must for spreading epoxy and resin glue evenly. Also ideal for engine cleaning.

Price: $2.30 Special Price: $1.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Exhaust Deflector (.20-.34)]]> http://www.hobbypeople.net/index.php/dubro-exhaust-deflector-20-34.html

Dubro Exhaust Deflector (.20-.34)

Exhaust Deflectors help to keep models clean and free of exhaust oils.

Price: $4.52 Special Price: $3.39

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Exhaust Deflector (.35-.90)]]> http://www.hobbypeople.net/index.php/dubro-exhaust-deflector-35-90.html Dubro Exhaust Deflector (.35-.90)

Exhaust Deflector (.35-.90)

This is a Exhaust Deflector for .35-.90 Size Glow Engines.

Price: $4.52 Special Price: $3.39

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro EZ Connectors - 12 Pack]]> http://www.hobbypeople.net/index.php/dubro-ez-connectors-12-pack.html

Dubro EZ-Connectors (12 Pack)

This is a 12 pack of Dubo EZ-Connectors. EZ Connectors are perfect for many appications, allowing a fast, simple and adjustable connection between your pushrod and servo arm. This 12 pack of EZ Connectors includes 12 brass connectors, 12 4-40 x 1/8" socket-cap retaining screws, 12 plastic retainers and 12 metal retainers.

Features and Specifications:

• Bulk Pack Includes 12 Pair of EZ Connectors

• Fast, Simple Connection Between Pushrod and Servo Arm - Adjustable, Too

• Includes:

• 12 Brass Connectors

• 12 4-40 x 1/8" Socket-Cap Screws

• 12 Plastic Retainers

• 12 Metail Retainers

Price: $8.71 Special Price: $6.53

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro EZ Connectors - Mini (12)]]> http://www.hobbypeople.net/index.php/dubro-ez-connectors-mini-12.html

Dubro EZ Connectors - Mini (12)

Dubro Mini EZ Connector

Ideal for park flyers. Get the same Du-Bro quality only in an itzy bitzy size. Light weight aluminum design allows for up to .047 wire. 2-56 machine screw securely locks wire into place. Press fit our Mini E/Z Connector into a Mini Servo Arm and secure with snap washer.

Price: $16.80 Special Price: $12.60

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro EZ Glo Glo-Plug Ignitor W/Beep Tester]]> http://www.hobbypeople.net/index.php/dubro-ez-glo-glo-plug-ignitor-w-beep-tester.html

Dubro EZ Glo Glo-Plug Ignitor W/Beep Tester

This is a revolutionary ignitor and glo-plug tester. The E/Z Glo will not only effectively ignite your models glo-plug, but will also test it and report its condition with an audible beep. Simply connect the E/Z Glo to your glo-plug, press the test button and listen for the beep. If you hear a beep, the plug is good. If there is no beep, the plug is bad. The E/Z Glo comes with a 1700 mAh battery & charger.

Price: $29.99 Special Price: $22.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro EZ Link - Micro2 For .047 (2)]]> http://www.hobbypeople.net/index.php/dubro-ez-link-micro2-for-047-2.html Dubro EZ Link - Micro2 For .047 (2) Micro2 EZ Link For .047 from Dubro. Snap fit on .047 wire, simply bend 90 angle on pushrod and install E/Z Link onto pushrod (No Z/Bend required). Super lightweight design, ideal for indoor and park flyers.

Price: $1.47 Special Price: $1.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro EZ Threader - 3-In-1 Installation Tool]]> http://www.hobbypeople.net/index.php/ez-threader.html

Dubro E/Z Threader

3 in 1 Installation Tool

This is a Dubro E/Z Threader 3 in 1 Installation Tool. This economical tool is a must for every modeler! It makes installing swivel ball links, nylon kwik links and clevises, and cup style ball links simple and easy. Buy one for your workbench and one for your field box.

Features and Specifications:

• Allows Quick and Easy Installation and Removal of Ball Links, Nylon Kwik Links and Clevises, and Cup Style Ball Links

Price: $5.25 Special Price: $3.94

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fillin Station (Can Mount) Unloaded]]> http://www.hobbypeople.net/index.php/dubro-fillin-station-can-mount-unloaded.html

Dubro Fillin Station (Can Mount) Unloaded

When you fuel your aircraft with the Fillin' Station, you will have everything you need right on board your fuel can.

Items Pictured with Fillin Station are sold separately. If you want the fully loaded Fillin Station you will need to order #877847

Price: $38.99 Special Price: $29.24

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Flex Cable Motor Control 20 in]]> http://www.hobbypeople.net/index.php/dubro-flex-cable-motor-control-20-in.html

Dubro Flex Cable Motor Control 20 in

The ulitmate in control cable assembly! Highly flexible, free running and adjustable at the control horn. Complete assembly includes: 1 each Mini Nylon Kwik-Link, Solder Link, 2-56 Nylon Kwik Link, threaded coupler, 1/16 aircraft cable and housing.

Price: $2.89 Special Price: $2.17

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Foam Rubber 1/2'' sheet]]> http://www.hobbypeople.net/index.php/dubro-foam-rubber-1-2-sheet.html Dubro Foam Rubber 1/2" sheet

High quality foam rubber. Works great for protecting your receiver and fuel tank from vibration and also gives protection during a crash. Available in two sizes 1/4 (6.3mm) and 1/2 (12.7mm) Each piece measures 7 (177.8mm) X 11 (279.4mm).

Price: $5.40 Special Price: $4.05

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Foam Rubber 1/4'' sheet]]> http://www.hobbypeople.net/index.php/dubro-foam-rubber-1-4-sheet.html Dubro Foam Rubber 1/4" sheet

High quality foam rubber. Works great for protecting your receiver and fuel tank from vibration and also gives protection during a crash. Available in two sizes 1/4 (6.3mm) and 1/2 (12.7mm) Each piece measures 7 (177.8mm) X 11 (279.4mm).

Price: $4.04 Special Price: $3.03

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Foam Tape]]> http://www.hobbypeople.net/index.php/dubro-foam-tape.html Dubro Foam Tape

Quality foam tape, super sticky on one side, cuts down vibration. Ideal for wing saddles. 1/8 (3.1mm)H X 3/8 (9.5mm) Wide X 3 ft (.914M)per roll.

Price: $2.09 Special Price: $1.57

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Can Cap Fittings]]> http://www.hobbypeople.net/index.php/dubro-fuel-can-cap-fittings.html Dubro Fuel Can Cap Fittings

For quick and easy fuel pump hook-ups. Universal cap fittings and new nylon filter for any standard 1 1/4 or larger. Includes 4 1/4 nuts, 3 top quality brass fittings and fuel filter.

Price: $4.10 Special Price: $3.08

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Filler - Fill It Fuel System]]> http://www.hobbypeople.net/index.php/dubro-fuel-filler-fill-it-fuel-system.html Dubro Fuel Filler - Fill It Fuel System

Fill It The Clean, Fast and Inexpensive Way! Now, one fueling system that can be used with 4 different tubing sizes: 1/16", 3/32", 1/8" and 5/32" I.D. Ideal for cowled engines, lightweight, no leaks, and can be used with glo-fuel and gasoline.The Fill It Fueling System features The Fill It Plug with handy knob for easy removal of fuel line to fill or drain your fuel tank. Comes with housing, 4 Fill It Fuel Line Plugs for different fuel tubing sizes, clunk and fuel tube for third line pick-up.

Price: $5.78 Special Price: $4.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Filter - In Line, Blue]]> http://www.hobbypeople.net/index.php/dubro-fuel-filter-in-line-blue.html Dubro Fuel Filter - In Line, Blue

The popular Du-Bro In-Line Fuel Filters have a hex design that makes opening and cleaning filter a snap. Put one on your airplane, car, boat or helicopter today! For glo-fuel or gasoline.

Price: $4.83 Special Price: $3.62

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Filter - In Line, Purple]]> http://www.hobbypeople.net/index.php/dubro-fuel-filter-in-line-purple.html Dubro Fuel Filter - In Line, Purple

The popular Du-Bro In-Line Fuel Filters have a hex design that makes opening and cleaning filter a snap. Put one on your airplane, car, boat or helicopter today! For glo-fuel or gasoline.

Price: $4.83 Special Price: $3.62

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Filter - In Line, Red]]> http://www.hobbypeople.net/index.php/dubro-fuel-filter-in-line-red.html Dubro Fuel Filter - In Line, Red

The popular Du-Bro In-Line Fuel Filters have a hex design that makes opening and cleaning filter a snap. Put one on your airplane, car, boat or helicopter today! For glo-fuel or gasoline.

Price: $4.83 Special Price: $3.62

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Filter - Large Scale]]> http://www.hobbypeople.net/index.php/dubro-fuel-filter-large-scale.html

Dubro Fuel Filter - Large Scale

This is the Large Scale model. Constructed of two threaded aluminum parts which separate for ease in cleaning. Works for both gas and glo fuels. 130 micron mesh screen filter to filter out the smallest of particles and an o-ring to properly seal against leakage.

Price: $3.89 Special Price: $2.92

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Line Barb 1/8'' (4)]]> http://www.hobbypeople.net/index.php/dubro-fuel-line-barb-1-8-4.html

 

Price: $1.58 Special Price: $1.19

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Line Clips - Large 1/8'']]> http://www.hobbypeople.net/index.php/dubro-fuel-line-clips-large-1-8.html Dubro Fuel Line Clips - Large 1/8"

Du-Bro's Fuel Line Clips help prevent fuel tubing from coming off fuel fittings.

Price: $1.63 Special Price: $1.22

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Line Clips - Medium 3/32'']]> http://www.hobbypeople.net/index.php/dubro-fuel-line-clips-medium-3-32.html

Dubro Fuel Line Clips - Medium 3/32"

Du-Bro's Fuel Line Clips help prevent fuel tubing from coming off fuel fittings.

Price: $1.63 Special Price: $1.22

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Line Plugs]]> http://www.hobbypeople.net/index.php/dubro-fuel-line-plugs.html

Dubro Fuel Line Plugs

For Gasoline or Diesel Fuel ONLY. This tubing won't harden or crack and remains flexible.

Price: $1.21 Special Price: $0.91

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank - 10 oz Rect w/Chin]]> http://www.hobbypeople.net/index.php/dubro-fuel-tank-10-oz-rect-w-chin.html

Dubro Fuel Tank - 10 oz Rect w/Chin

Du-Bro 10 oz. Fuel Tank

Features:

Protruding front protects fuel lines.

Cap fits over neck of tank to prevent splitting.

Soft brass tubes for easy bending.

Single or twin vent design.

Clunk fuel pick-up for even fuel flow.

Comes complete with all hardware,including DuBro's one piece clunk with fuel barbs built right on theclunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tankscan be used with either glo-fuel or gasoline.

Price: $5.25 Special Price: $3.94

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank - 12 oz Rect w/Chin]]> http://www.hobbypeople.net/index.php/dubro-fuel-tank-12-oz-rect-w-chin.html

Dubro Fuel Tank - 12 oz Rect w/Chin

Du-Bro 12 oz. Fuel Tank

Features:

  • Protruding from protects fuel lines.
  • Cap fits over neck of tank to prevent splitting.
  • Soft brass tubes for easy bending.
  • Single or twin vent design.
  • Clunk fuel pick-up for even fuel flow.

Comes complete with all hardware,including DuBro's one piece clunk with fuel barbs built right on theclunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tankscan be used with either glo-fuel or gasoline.

Price: $5.46 Special Price: $4.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank - 14 oz Rect w/Chin]]> http://www.hobbypeople.net/index.php/dubro-fuel-tank-14-oz-rect-w-chin.html Dubro Fuel Tank - 14 oz Rect w/Chin

14 oz tank measurements: 2 3/8 H x 2 11/16 W x 5 3/8 Long. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, Du-Bro fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.

Price: $5.99 Special Price: $4.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank - 16 oz Rect w/Chin]]> http://www.hobbypeople.net/index.php/dubro-fuel-tank-16-oz-rect-w-chin.html Dubro Fuel Tank - 16 oz Rect w/Chin

16 oz tank measurements: 2 3/8 H x 2 11/16 W x 5 7/8 Long. Du-Bro Fuel Tanks are designed to be tough! Du-Bro fuel tanks will not split or crack from vibration or pressure. In fact, Du-Bro fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.

Price: $6.30 Special Price: $4.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank - 2 oz Rect]]> http://www.hobbypeople.net/index.php/dubro-fuel-tank-2-oz-rect.html Dubro Fuel Tank - 2 oz Rect

2 oz Tank Measurements: 1 5/16 H x 1 13/16 W x 2 3/4 Long Du-BroFuel Tanks are designed to be tough! These fuel tanks will not splitor crack from vibration or pressure. In fact, the fuel tanks can beused with pressurized fuel systems!

Comes complete with all hardware,including DuBro's one piece clunk with fuel barbs built right on theclunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tankscan be used with either glo-fuel or gasoline.

Price: $4.25 Special Price: $3.19

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank - 20 oz Rect w/Chin]]> http://www.hobbypeople.net/index.php/dubro-fuel-tank-20-oz-rect-w-chin.html Dubro Fuel Tank - 20 oz Rect w/Chin

20 oz tank measurements: 2 1/2 H x 3 1/16 W x 7 Long. Du-Bro Fuel Tanks are designed to be tough! Du-Brofuel tanks will not split or crack from vibration or pressure. In fact, Du-Bro fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.

Price: $7.04 Special Price: $5.28

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank - 24 oz Rect w/Chin]]> http://www.hobbypeople.net/index.php/dubro-fuel-tank-24-oz-rect-w-chin.html

Dubro Fuel Tank - 24 oz Rect w/Chin

24 oz tank measurements: 2 1/2 H x 3 1/16 W x 7 1/2 Long. Du-Bro Fuel Tanks are designed to be tough! Du-Bro fuel tanks will not split or crack from vibration or pressure. In fact, Du-Bro fuel tanks can be used with pressurized fuel systems! Comes complete with all hardware, including one piece clunk with fuel barbs built right on the clunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tanks can be used with either glo-fuel or gasoline if you purchase our catalog #400 Gasoline Conversion Stopper.

Price: $7.35 Special Price: $5.51

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank - 32 oz Rect w/Chin]]> http://www.hobbypeople.net/index.php/dubro-fuel-tank-32-oz-rect-w-chin.html

Dubro Fuel Tank - 32 oz Rect w/Chin

32 oz tank measurements: 3 H x 3 11/16 W x 7 3/4 Long. Come complete with stopper and fuel tubing for both gas and glo fuel and proportionally larger brass tubing and clunk. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems!

Price: $10.87 Special Price: $8.15

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank - 4 oz Rect]]> http://www.hobbypeople.net/index.php/dubro-fuel-tank-4-oz-rect.html Dubro Fuel Tank - 4 oz Rect

Du-Bro 4 oz. Fuel Tank

Features:

Protruding front protects fuel lines.
Cap fits over neck oftank to prevent splitting.
Soft brass tubes for easybending.
Single or twin vent design.
Clunk fuel pick-up foreven fuel flow.

Comes complete with all hardware,including DuBro's one piece clunk with fuel barbs built right on theclunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tankscan be used with either glo-fuel or gasoline.

Price: $4.67 Special Price: $3.50

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank - 40 Oz]]> http://www.hobbypeople.net/index.php/fuel-tank-40-oz.html

Dubro 40 Ounce Fuel Tank

This is a Dubro 40 Ounce Fuel Tank. Comes complete with stopper and fuel tubing for both gasoline and glow fuel and proportionally larger brass tubing and clunk. Du-Bro Fuel Tanks are designed to be tough! Our fuel tanks will not split or crack from vibration or pressure. In fact, our fuel tanks can be used with pressurized fuel systems!

Features and Specifications:

• Dimensions (L x H x W): 8 x 3-1/4 x 4"

• Will Not Split or Crack From Vibration or Pressure

• Can Be Used With Pressurized Fuel Systems

• Includes Hardware for Use with Gasoline or Glow Fuel

• Front Step Prevents Kinking of Fuel Lines

Price: $13.49 Special Price: $10.12

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank - 6 oz Rect w/Chin]]> http://www.hobbypeople.net/index.php/dubro-fuel-tank-6-oz-rect-w-chin.html Dubro Fuel Tank - 6 oz Rect w/Chin

Du-Bro 6 oz. Fuel Tank

Features:

Protruding front protects fuel lines.
Cap fits over neck oftank to prevent splitting.
Soft brass tubes for easybending.
Single or twin vent design.
Clunk fuel pick-up foreven fuel flow.

Comes complete with all hardware,including DuBro's one piece clunk with fuel barbs built right on theclunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tankscan be used with either glo-fuel or gasoline.

Price: $4.83 Special Price: $3.62

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank - 8 oz Rect w/Chin]]> http://www.hobbypeople.net/index.php/dubro-fuel-tank-8-oz-rct-w-chin.html Dubro Fuel Tank - 8 oz Rct w/Chin

Du-Bro 8 oz. Fuel Tank



Features:

Protruding front protects fuel lines.

Cap fits over neck of tank to prevent splitting.

Soft brass tubes for easy bending.

Single or twin vent design.

Clunk fuel pick-up for even fuel flow.

Comes complete with all hardware,including DuBro's one piece clunk with fuel barbs built right on theclunk stem. Your fuel tubing will not slide off! Du-Bro Fuel Tankscan be used with either glo-fuel or gasoline.

Price: $5.15 Special Price: $3.86

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tank Filter]]> http://www.hobbypeople.net/index.php/dubro-tank-filter.html Dubro Tank Filter

Combination weight and filter. Designed to fit all clunk tanks. Made of sintered bronze to give the ultimate in filtering.

Price: $2.63 Special Price: $1.97

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel tubing - 5/32 I.D. Silicone (3 Ft)]]> http://www.hobbypeople.net/index.php/dubro-fuel-tubing-5-32-i-d-silicone-3-ft.html

Dubro Fuel tubing - 5/32 I.D. Silicone (3 Ft)

5/32 I.D. Silicone Tubing (3ft)

Replacement fuel line for all nitro engines.

Price: $3.73 Special Price: $2.80

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tubing - 5/32 Tygon Tubing (3 Ft)]]> http://www.hobbypeople.net/index.php/fuel-tubing-5-32-tygon-tubing-3-ft.html

Dubro Tygon 5/32" I.D. X-Large Fuel Tubing

This is a 3 foot lengh of Dubro Tygon 5/32" I.D. X-Large Fuel Tubing. Tygon fuel tubing is designed for gasoline or diesel fuel ONLY. It won't harden or crack and remains flexible.

Features and Specifications:

• Inner Diameter: 5/32"

• Length: 3 Feet

• Yellow Color

• For Use with Gasoline or Diesel Fuel ONLY

• Won't Harden or Crack and Remains Flexible

Price: $6.72 Special Price: $5.04

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tubing - Neoprene Medium 2Ft]]> http://www.hobbypeople.net/index.php/dubro-fuel-tubing-neoprene-medium-2ft.html

 

Price: $2.49 Special Price: $1.87

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tubing - Tygon For Gasoline 3ft x 1/8'' ID Yellow]]> http://www.hobbypeople.net/index.php/dubro-fuel-tubing-tygon-for-gasoline-3ft-x-1-8-id-yellow.html

Dubro Fuel Tubing - Tygon For Gasoline 3ft x 1/8" ID Yellow For Gasoline or Diesel Fuel ONLY. This tubing won't harden or crack and remains flexible.

Price: $5.25 Special Price: $3.94

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Tubing - Tygon For Gasoline 3ft x 3/32'' ID Yellow]]> http://www.hobbypeople.net/index.php/dubro-fuel-tubing-tygon-for-gasoline-3ft-x-3-32-id-yellow.html

Dubro Fuel Tubing - Tygon For Gasoline 3ft x 3/32" ID Yellow For Gasoline or Diesel Fuel ONLY. This tubing won't harden or crack and remains flexible.

Price: $4.62 Special Price: $3.47

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Fuel Valve - Large Scale (Gas)]]> http://www.hobbypeople.net/index.php/fuel-valve-large-scale-gas.html

Dubro Large Scale Kwik-Fill Fueling Valve

for Gasoline

This is a Dubro Large Scale Kwik-Fill Fueling Valve for Gasoline. This fueling valve is designed for large scale aircraft that use larger engines and therefore require more fuel flow. The Large Scale Fueling Valve features a larger bore which allows for increased fuel flow through the valve. It won't starve your thirsty large-scale engine. Fuel valve is compatible with gasoline and features a plastic dust cover and fuel probe.

Features and Specifications:

• Designed for Use with Large Scale Aircraft

• Mounts to Aircraft's Cowling or Other Inconspicuous Area to Make Fueling Faster and Easier

• Allows Increased Fuel Flow Through Valve

• Includes Dust Cover and Fuel Probe

• Designed for Use with Gasoline

Price: $18.99 Special Price: $14.24

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Gas Conversion Stopper]]> http://www.hobbypeople.net/index.php/dubro-gas-conversion-stopper.html Dubro Gas Conversion Stopper

Specially formulated replacement stopper to convert any 2 oz to 50 oz Du-Bro fuel tank to Gasoline. The Gasoline stopper is brown.

Price: $1.73 Special Price: $1.30

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Glo-Plug Driver for Glow Plugs (Wrench, T-Handle)]]> http://www.hobbypeople.net/index.php/dubro-glo-driver-for-glow-plugs.html

Dubro Glo-Driver for Glow Plugs

Works on all standard glo-plugs. Essential tool for all R/C cars & trucks.

Price: $5.72 Special Price: $4.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Hatch Latch]]> http://www.hobbypeople.net/index.php/dubro-hatch-latch.html

Dubro Hatch Latch A low profile design with a small spring locking latch for any doors, hatches, panels, etc. The Hatch Latch is secured in place using CA (cyanoacrylate). The unit is approx. 1 long X 3/8 wide. Can be painted.1/pkg. (0.75 grams/ea.)

Price: $3.41 Special Price: $2.56

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Heat Shrink Tubing - 1/16'' Blue]]> http://www.hobbypeople.net/index.php/dubro-heat-shrink-tubing-1-16-blue.html Dubro Heat Shrink Tubing - 1/16" Blue

The ideal solution for many of your modeling needs. This tubing has been specially formulated to shrink up to one half its original diameter simply by using a heat gun, soldering iron, or cigarette lighted. Ideal for insulating electrical splices, and also covering electrical plugs and connectors. All come in 3 (76mm) lengths

Price: $1.79 Special Price: $1.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Heat Shrink Tubing - 1/4'' Yellow]]> http://www.hobbypeople.net/index.php/dubro-heat-shrink-tubing-1-4-yellow.html Dubro Heat Shrink Tubing - 1/4" Yellow

The ideal solution for many of your modeling needs. This tubing has been specially formulated to shrink up to one half its original diameter simply by using a heat gun, soldering iron, or cigarette lighted. Ideal for insulating electrical splices, and also covering electrical plugs and connectors. All come in 3 (76mm) lengths.

Price: $1.79 Special Price: $1.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Heat Shrink Tubing - 1/8'' (8/Pkg)]]> http://www.hobbypeople.net/index.php/dubro-heat-shrink-tubing-1-8-8-pkg.html

 

Price: $1.79 Special Price: $1.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Heat Shrink Tubing - 1/8'' Red]]> http://www.hobbypeople.net/index.php/dubro-heat-shrink-tubing-1-8-red.html

Dubro Heat Shrink Tubing - 1/8" Red

The ideal solution for many of your modeling needs. This tubing has been specially formulated to shrink up to one half its original diameter simply by using a heat gun, soldering iron, or cigarette lighted. Ideal for insulating electrical splices, and also covering electrical plugs and connectors. 76mm long

Price: $1.79 Special Price: $1.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Heat Shrink Tubing - 3/16'' (4 Red/4 Black)]]> http://www.hobbypeople.net/index.php/dubro-heat-shrink-tubing-set-3-16-8-pkg.html

 

Price: $1.79 Special Price: $1.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Heat Shrink Tubing - 3/16'' White]]> http://www.hobbypeople.net/index.php/dubro-heat-shrink-tubing-3-16-white.html Dubro Heat Shrink Tubing - 3/16" White

The ideal solution for many of your modeling needs. This tubing has been specially formulated to shrink up to one half its original diameter simply by using a heat gun, soldering iron, or cigarette lighted. Ideal for insulating electrical splices, and also covering electrical plugs and connectors. 76mm long

Price: $1.79 Special Price: $1.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Heat Shrink Tubing - 3/32'' Green]]> http://www.hobbypeople.net/index.php/dubro-heat-shrink-tubing-3-32-green.html Dubro Heat Shrink Tubing - 3/32" Green The ideal solution for many of your modeling needs. This tubing has been specially formulated to shrink up to one half its original diameter simply by using a heat gun, soldering iron, or cigarette lighted. Ideal for insulating electrical splices, and also covering electrical plugs and connectors. All come in 3 (76mm) lengths

Price: $1.79 Special Price: $1.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Heat Shrink Tubing - 3/8'' Black]]> http://www.hobbypeople.net/index.php/dubro-heat-shrink-tubing-3-8-black.html Dubro Heat Shrink Tubing - 3/8" Black

The ideal solution for many of your modeling needs. This tubing has been specially formulated to shrink up to one half its original diameter simply by using a heat gun, soldering iron, or cigarette lighted. Ideal for insulating electrical splices, and also covering electrical plugs and connectors. 76mm long

Price: $1.79 Special Price: $1.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Heat Shrink Tubing - Assorted]]> http://www.hobbypeople.net/index.php/dubro-heat-shrink-tubing-assorted.html Dubro Heat Shrink Tubing - Assorted

The ideal solution for many of your modeling needs. This tubing has been specially formulated to shrink up to one half its original diameter simply by using a heat gun, soldering iron, or cigarette lighted. Ideal for insulating electrical splices, and also covering electrical plugs and connectors. All come in 3 (76mm) lengths.

Price: $5.51 Special Price: $4.13

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Hinge Slotter Kit]]> http://www.hobbypeople.net/index.php/dubro-hinge-slotter-kit.html

Dubro Hinge Slotter Kit

Du-Bro Hinge Slotter Kit takes the hassle out of slotting control surfaces for gluing hinges. The centering/parallel guide centerd hinge slotter on up to 3/4" material. Four handle set plus guide and centering tool for three different size slotting forks: mini, standard and heavy duty hinges. Designed to work with all Du-Bro hinges. The 3 slotters and the "picker" are permanently mounted to red nylon handles. Packedged in reusable, recyclable clamshell storage blister.

Price: $9.99 Special Price: $7.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Hinge Tape 1'' x 5 Yds]]> http://www.hobbypeople.net/index.php/dubro-hinge-tape-1-x-5-yds.html

Dubro Hinge Tape 1" x 5 Yds

This Electric Flyer Hinge Tape has great adhesion characteristics and is easy to remove. In addition, it will not leave residue.

Price: $5.25 Special Price: $3.94

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Hinges - Heavy Duty (15)]]> http://www.hobbypeople.net/index.php/dubro-hinges-heavy-duty-15.html Dubro Hinges - Heavy Duty (15)

Built to take heavy loads, 3/4 (19mm) Wide X 1 3/8 (35mm) Long X.040 (1mm) thick. Removable 3/64 (1.2) diameter cotter pin formaximum convenience and strength. Ideal for big airplanes.

Includes 15 hinges

Price: $6.56 Special Price: $4.92

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Hinges - Nylon (15)]]> http://www.hobbypeople.net/index.php/dubro-hinges-nylon-15.html Dubro Hinges - Nylon (15)

Standard Hinge measurements: 5/8 (16mm) Wide X 1 1/8 (28mm) Long.Precision molded, inspected and assembled with locked in hinge pin.Flash free, simple to install. Hinges have 6 holes on each side formaximum holding power

Includes 15 hinges

Price: $4.99 Special Price: $3.74

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Hinges - Nylon (6)]]> http://www.hobbypeople.net/index.php/dubro-hinges-nylon-6.html Dubro Hinges - Nylon (6)

Standard Hinge measurements: 5/8 (16mm) Wide X 1 1/8 (28mm) Long.Precision molded, inspected and assembled with locked in hinge pin.Flash free, simple to install. Hinges have 6 holes on each side formaximum holding power

Includes 6 hinges

Price: $2.42 Special Price: $1.82

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Hook & Loop Mounting Material]]> http://www.hobbypeople.net/index.php/dubro-hook-and-loop-mounting-material.html Dubro Hook & Loop Mounting Material

Super tough material with a glue-like stick. Good for mounting receivers, batteries - unlimited uses! Adhesive back on one side for easy mounting. 1 1 x 12 set per package.

Price: $4.41 Special Price: $3.31

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Horn Bracket - 3/32'' Adj 4-40 Thread (4)]]> http://www.hobbypeople.net/index.php/dubro-horn-bracket-3-32-adj-4-40-thread-4.html Dubro Horn Bracket - 3/32" Adj 4-40 Thread (4)

Includes 4 each E/Z Adjust Nylon Horn Bracket only.

Price: $1.47 Special Price: $1.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Horn Bracket - 6-32 Thread Heavy Duty (4)]]> http://www.hobbypeople.net/index.php/dubro-horn-bracket-6-32-thread-heavy-duty-4.html

Dubro Horn Bracket - 6-32 Thread Heavy Duty (4)

Includes 4 each E/Z Adjust Nylon Horn Bracket only.

Price: $1.47 Special Price: $1.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro In-Line Fuel Filter]]> http://www.hobbypeople.net/index.php/dubro-in-line-fuel-filter.html Dubro In-Line Fuel Filter

Constructed of two threaded aluminum parts which separate for ease in cleaning. Works for both gas and glo fuels. 130 micron mesh screen filter to filter out the smallest of particles and an o-ring to properly seal against leakage.

Price: $3.47 Special Price: $2.60

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik Fill Fuel Can Fitting]]> http://www.hobbypeople.net/index.php/dubro-kwik-fill-fuel-can-fitting.html

Dubro Kwik Fill Fuel Can Fitting

For Gasoline or Glo Fuel. This tubing won't harden or crack and remains flexible.

Price: $9.45 Special Price: $7.09

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik Fill Fuel Pump]]> http://www.hobbypeople.net/index.php/dubro-kwik-fill-fuel-pump.html

Dubro Kwik Fill Fuel Pump Kwik Fill Fuel Pump from Dubro. Works with gasoline and glo fuel. Comes complete with silicone fuel tubing (for gasoline, purchase Tygon tubing). Pump transfers 1 oz. per 3 revolutions. Kwik-Fill cap fitting included.

Includes

  • Kwik-Fill fuel pump
  • Kwik-Fill fuel cap fitting
  • Silicone tubing
  • Mounting chain

Price: $21.99 Special Price: $16.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik Grip EZ Connectors (2)]]> http://www.hobbypeople.net/index.php/dubro-kwik-grip-ez-connectors-2.html Dubro Kwik Grip EZ Connectors (2)

Features a Hex style design which allows for a secure hold on the E/Z Connector while tightening the screw. The Kwik Grip E/Z Connector Wrench #609, tightly secures the E/Z Connector from 6 different angles, providing a tight grip while tightening the locking screw. Includes 2 each Kwik Grip E/Z Connector, 2 each 4-40 x 3/16 Socket Head Cap Screws, 2 each black snap washer, and 2 each push on washer. For .072 (2-56) wire

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik Link 12in, 2-56 Rod]]> http://www.hobbypeople.net/index.php/dubro-kwik-link-12in-2-56-rod.html Dubro Kwik Link 12in, 2-56 Rod

Complete assembly for any control linkage. Allows easy removal for on-the-field adjustments. Features 12 long .072 diameter rod with 3/4 2-56 thread one end and our 2-56 Spring Steel Kwik Link.

Price: $1.05 Special Price: $0.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik Link Nylon w/Rod]]> http://www.hobbypeople.net/index.php/dubro-kwik-link-nylon-w-rod.html Dubro Kwik Link Nylon w/Rod

Features Du-Bro Nylon Kwik Link on a .072 diameter 12 rod with 3/4 2-56 thread on one end.

Price: $0.99 Special Price: $0.74

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik Links Nylon (2)]]> http://www.hobbypeople.net/index.php/dubro-kwik-links-nylon-2.html Dubro Kwik Links Nylon (2)

These sure-lock Nylon Kwik-Links are self threading nylon for 2-56 rods or threaded couplers.

Price: $0.99 Special Price: $0.74

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik Links Steel (2)]]> http://www.hobbypeople.net/index.php/dubro-kwik-links-steel-2.html

Dubro Kwik Links Steel (2)

Spring Steel Kwik-Links are the tried and true top quality Kwik-Link. Ideal for control linkage hook-up. Use with threaded rods or threaded couplers. 2-56 are for use with .072 dia wire, link guards included.

Price: $1.31 Special Price: $0.98

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik Switch & Charging Jack]]> http://www.hobbypeople.net/index.php/dubro-kwik-switch-and-charging-jack.html

Dubro Kwik Switch & Charging Jack

Du-Bro's Kwik-Switch & Charging Jack offers a clean and simple way to mount receiver battery switches and charging plugs. Designed to mount on any aircraft fuselage within minutes, the Kwik-Switch & Charging Jack uses one single set screw to lock the charging plug into place. Universal and will fit all radio systems!

Price: $4.41 Special Price: $3.31

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik-Fill Fuel Valve (Glow)]]> http://www.hobbypeople.net/index.php/dubro-kwik-fill-fuel-valve.html

Dubro Kwik Fill Fuel Valve

The fuel to the carburetor is automatically shut off when the coupler is inserted into valve. This prevents any carburetor flooding during refueling.

Great for use with cowled engines.

Price: $15.99 Special Price: $11.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik-Fill Fueling Valve Gasoline]]> http://www.hobbypeople.net/index.php/dubro-kwik-fill-fueling-valve-gasoline.html

Dubro Kwik-Fill Fueling Valve Gasoline

The clean, safe way to fill your tank without disconnecting your fuel line from the carburetor. Perfect for models with enclosed engines. Easy to install. Comes complete with fueling probe. (Silver model is for GLO FUEL ONLY. Red Annodized Model is for GAS ONLY)

Price: $16.49 Special Price: $12.37

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik-Klip III w/o Charger]]> http://www.hobbypeople.net/index.php/dubro-kwik-klip-iii-w-o-charger.html

Dubro Kwik-Klip III w/o Charger

DuBro's Kwik-Klip III's unscrew like a flashlight to easily change the battery.

Price: $18.62 Special Price: $13.97

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik-Klip III XL w/o Charger/Battery]]> http://www.hobbypeople.net/index.php/dubro-kwik-klip-iii-xl-w-o-charger-battery.html

Dubro Kwik-Klip III XL w/o Charger/Battery

DuBro's Kwik-Klip III's unscrew like a flashlight to easily change the battery.

Price: $19.89 Special Price: $14.92

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik-Links Nylon - Bulk Pack]]> http://www.hobbypeople.net/index.php/dubro-kwik-links-nylon-bulk-pack.html Dubro Kwik-Links Nylon - Bulk Pack

These sure-lock Nylon Kwik-Links are self threading nylon for 2-56 rods or threaded couplers.

Price: $4.73 Special Price: $3.55

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Kwik-Switch Mount]]> http://www.hobbypeople.net/index.php/dubro-kwik-switch-mount.html

Dubro Kwik-Switch Mount

Mounting bracket is adaptable to fit both small and large radio switches. This complete switch mounting set enables you to install your battery switch in minutes, anywhere in the fuselage, by drilling one 3/16 hole! Excellent for use in planes, helicopters, boats, and cars. This attractive, black nylon switch mount is adaptable to any wall thickness up to 3/8 (9.5mm).

Price: $3.78 Special Price: $2.84

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Landing Gear - .25- .50 Super Strong]]> http://www.hobbypeople.net/index.php/dubro-landing-gear-25-50-super-strong.html

Dubro Landing Gear - .25- .50 Super Strong

For .35-.60 size airplanes. DuBro's super quality landing gear will absorb landings without bending out of shape. Featuring a one piece design, this Hi-Strength, glass enforced landing gear can be painted and weighs less than aluminum. Easy to install too! Approx. 14 1/2" wide X 4 1/2" high

Price: $15.44 Special Price: $11.58

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Landing Gear Straps - 1/8 in nylon]]> http://www.hobbypeople.net/index.php/dubro-landing-gear-straps-1-8-in-nylon.html Dubro Landing Gear Straps - 1/8 in nylon

Strong nylon straps are molded to fit 1/8 (3mm) and 5/32 (4mm) music wire. Includes 4 each straps and 8 each 2 x 7/16 slotted sheet metal screws

Price: $1.31 Special Price: $0.98

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Landing Gear Straps - 5/32 in nylon]]> http://www.hobbypeople.net/index.php/dubro-landing-gear-straps-5-32-in-nylon.html Dubro Landing Gear Straps - 5/32 in nylon

Strong nylon straps are molded to fit 1/8 (3mm) and 5/32 (4mm) music wire. Includes 4 each straps and 8 each 2 x 7/16 slotted sheet metal screws

Price: $1.31 Special Price: $0.98

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Large Threaded Couplers (5)]]> http://www.hobbypeople.net/index.php/dubro-large-threaded-couplers-5.html Dubro Large Threaded Couplers (5)

Designed for use with Du-Bro Kwik-Links and ball links. 212 are 2-56 threaded 3/4 (19mm) with an overall 1/14 (31.7MM) length.

Price: $2.99 Special Price: $2.24

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Lazer Rod Push Rod Exits]]> http://www.hobbypeople.net/index.php/dubro-lazer-rod-push-rod-exits.html

Dubro Lazer Rod Push Rod Exits

Use in conjunction with our Lazer Rods , the push rod exits give your aircraft a clean look!

Price: $2.78 Special Price: $2.09

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Lock Nuts 3-48 w/Nylon Insert (4)]]> http://www.hobbypeople.net/index.php/lock-nuts-3-48-w-nylon-insert-4.html

865189 Lock Nuts 3-48 w/Nylon Insert (4)

Price: $1.05 Special Price: $0.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Aileron System]]> http://www.hobbypeople.net/index.php/dubro-micro-aileron-system.html

Dubro Micro Aileron System

Du-Bro's Micro Aileron System is designed for indoor and park flyer aircraft. Complete with Micro E/Z Link (2), Micro E/Z Connector (2), 1/32 (.032) push rods (2) with

Price: $5.72 Special Price: $4.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Clevis Replacement Pins]]> http://www.hobbypeople.net/index.php/dubro-micro-clevis-replacement-pins.html Dubro Micro Clevis Replacement Pins

Replacement pins for Dubro's # 917 & # 921

Price: $1.62 Special Price: $1.22

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro E/Z Hinge]]> http://www.hobbypeople.net/index.php/dubro-micro-e-z-hinge.html

Dubro Micro E/Z Hinge Now you can hinge your control surfaces with these popular "pin style" hinges. Designed for micro indoor and park flyer models, these use metal pivot pins and multiple connecting arms for strength. Overall Length: 1.28125" (1-9/32") 15/pkg. (0.18 grams/ea.)

Price: $4.57 Special Price: $3.43

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Profile Landing Gear]]> http://www.hobbypeople.net/index.php/dubro-micro-profile-landing-gear.html

Dubro Micro Profile Landing Gear Strong, lightweight, & versitile! This landing gear for profile mounting is the answer for your "foamie", "ARF's" and your original designs. Simple and strong mounting with all hardware included. This is THE landing gear for all profiles up to 5/8" wide. Weight including hardware: 34.0 grams (less after trimming)

Price: $9.24 Special Price: $6.93

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Pull-Pull System]]> http://www.hobbypeople.net/index.php/dubro-micro-pull-pull-system.html

Dubro Micro Pull-Pull System

This Micro Pull-Pull system gives you precision control! Comes complete with 4 Du-Bro Mini E/Z Connectors, 8 aluminum crimps, 10 feet of 10 pound test no stretch control line, and 4 micro adjustment pins. The Micro Pull-Pull System weighs 2.2 grams.

Price: $9.24 Special Price: $6.93

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Pushrod Guide (4)]]> http://www.hobbypeople.net/index.php/dubro-micro-pushrod-guide-4.html

Dubro Micro Pushrod Guide (4) A versatile guide/support for control linkages, throttle, etc. Three holes make it easy to accommodate different set-ups The Micro Pushrod Guide can be used on foam, wood, etc. For foam, just press pins through and cement with CA or epoxy and cut off any protruding pins. If used on balsa, pre-drill small holes. The guide holes are 0.080 diameter.

Price: $1.42 Special Price: $1.07

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Pushrod System]]> http://www.hobbypeople.net/index.php/dubro-micro-pushrod-system.html Dubro Micro Pushrod System

Comes complete with (2) 20" .032 pushrods, (2) 18" pushrod housings, (2) Micro E/Z Links (90 degree bend is already on pushrods) and (2) Mini E/Z Connectors. Ideal for indoor and park flyers.

Price: $5.72 Special Price: $4.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Pushrod System 30'']]> http://www.hobbypeople.net/index.php/dubro-micro-pushrod-system-30.html Dubro Micro Pushrod System 30"

Comes complete with (2) 30

Price: $6.93 Special Price: $5.20

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Servo Arm XL (GWS Narrow/Standard, MPI MX-50)]]> http://www.hobbypeople.net/index.php/micro-servo-arm-xl-gws-narrow-standard-mpi-mx-50.html

873932 Micro Servo Arm XL (GWS Narrow/Standard, MPI MX-50)

Price: $6.93 Special Price: $5.20

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Sport Wheels 1.230'' x .047'' x 1.1'']]> http://www.hobbypeople.net/index.php/dubro-micro-sport-wheels-1-230-x-047-x-1-1.html Dubro Micro Sport Wheels 1.230" x .047" x 1.1" These open spoke wheels will add a sporty look to your model. They have been designed with indoor and park flyer models in mind. 2/pkg. [Wheel Dia. = 1.230" (31mm) / Axle Dia. = .047" (1.2mm) / Weight = 1.1 grams/ea]

Price: $2.36 Special Price: $1.77

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Sport Wheels 1.45'' x .078'' x 1.8'']]> http://www.hobbypeople.net/index.php/dubro-micro-sport-wheels-1-45-x-078-x-1-8.html Dubro Micro Sport Wheels 1.45" x .078" x 1.8" Three more Micro Wheels to choose from! These open spoke wheels will add a sporty look to your model. They have been designed with indoor and park flyer models in mind. 2/pkg. [Wheel Dia. = 1.450" (37mm) / Axle Dia. = .078" (2.0mm) / Weight = 1.8 grams/ea]

Price: $2.94 Special Price: $2.21

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Sport Wheels 1.860'' x .078'' x 3.2'']]> http://www.hobbypeople.net/index.php/dubro-micro-sport-wheels-1-860-x-078-x-3-2.html Dubro Micro Sport Wheels 1.860" x .078" x 3.2" These open spoke wheels will add a sporty look to your model. They have been designed with indoor and park flyer models in mind. 2/pkg. [Wheel Dia. = 1.860" (47mm) / Axle Dia. = .078" (2.0mm) / Weight = 3.2 grams/ea]

Price: $3.52 Special Price: $2.64

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Sport Wheels 2.50'' (2)]]> http://www.hobbypeople.net/index.php/dubro-micro-sport-wheels-2-50-2.html Dubro Micro Sport Wheels 2.50" (2) These open spoke wheels from Dubro will add a sporty look to your model. They have been designed with indoor and park flyer models in mind.

Specifications
  • Wheel Diameter: 2.500" (64.5mm)
  • Axle Diameter: .078"/2.0mm
  • Weight: 6.9g each

Price: $3.89 Special Price: $2.92

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Steerable Tail Wheel]]> http://www.hobbypeople.net/index.php/dubro-micro-steerable-tail-wheel.html Dubro Micro Steerable Tail Wheel The Micro Steerable Tail Wheel comes with the strut and a 1/2 dia. wheel. This mount can be steerable or left free to travel. Mounts directly to the tail of your aircraft with CA (cyanoacrylate) or epoxy. The arm for steering is included and is 1 1/16 wide. This unit is paintable ABS plastic and will add functionality to your aircraft without adding a lot of weight. 1/pkg. (1.75 grams/ea.)

Price: $4.57 Special Price: $3.43

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Tail Skid]]> http://www.hobbypeople.net/index.php/dubro-micro-tail-skid.html

Dubro Micro Tail Skid

This is the Micro Tail-Skid from Du-Bro

Price: $1.47 Special Price: $1.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Z-Bend Wire Fitting .031'' Dia (6/pkg)]]> http://www.hobbypeople.net/index.php/dubro-micro-z-bend-wire-fitting-031-dia-6-pkg.html

Dubro Micro Z-Bend Wire Fitting (.031" Diameter)

This is a set of six Dubro Micro Z-Bend Wire Fittings (.031" Diameter). Pre-Shaped Z-bend fittings with heat shrink tubing to securely attach to .031" (0.8mm) and .047" (0.8mm) wire, plastic and carbon pushrods. Small Z-bends to accommodate thin servo arms.

Features and Specifications:

• Pre-Shaped Z-Bend Fittings

• .031 Inch (0.8mm) Diameter Wire

• Included Heat-Shrink Tubing Attaches Wire to Wire, Plastic or Carbon Fiber Pushrods (Not Included)

• Small Z-Bend Accommodates Thin Servo Arms Found on Many Micro Servos

• Includes Six Pre-Shaped Wires and One Length of Heat Shrink Tubing

Price: $3.49 Special Price: $2.62

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro Z-Bender Wire Fitting - .047'' Dia (6/pkg)]]> http://www.hobbypeople.net/index.php/dubro-micro-z-bender-wire-fitting-047-dia-6-pkg.html

Dubro Micro Z-Bend Wire Fitting (.047" Diameter)

This is a set of six Dubro Micro Z-Bend Wire Fittings (.047" Diameter). Pre-Shaped Z-bend fittings with heat shrink tubing to securely attach to .031" (0.8mm) and .047" (1.20mm) wire, plastic and carbon pushrods. Small Z-bends to accommodate thin servo arms.

Features and Specifications:

• Pre-Shaped Z-Bend Fittings

• .047 Inch (1.20mm) Diameter Wire

• Included Heat-Shrink Tubing Attaches Wire to Wire, Plastic or Carbon Fiber Pushrods (Not Included)

• Small Z-Bend Accommodates Thin Servo Arms Found on Many Micro Servos

• Includes Six Pre-Shaped Wires and One Length of Heat Shrink Tubing

Price: $3.49 Special Price: $2.62

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Micro2 30'' Pushrod System]]> http://www.hobbypeople.net/index.php/dubro-micro2-30-pushrod-system.html Dubro Micro2 30" Pushrod System

Du-Bro 30" Micro Pushrod System

Lightweight, flexible and strong , solid wire pushrod with a 90 degree bend on one end of pushrod. Package includes (2) micro pushrods, (2) mini EZ connectors, (2) micro EZ link, (2) EZ connector installation screws, (2) nylon washers for EZ connectors, and instructions.

Price: $7.25 Special Price: $5.44

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Mini E/Z connector]]> http://www.hobbypeople.net/index.php/dubro-mini-e-z-connector.html Dubro Mini E/Z connector

Ideal for Park Flyers! Get the same Du-Bro quality only in an itzy bitzy size. Lightweight aluminum design (0.25g) allows for up to .047 wire. 2-56 machine screw securely locks wire into place. Press fit our Mini E/Z Connector into a Mini Servo Arm for a secure and dependable fit. 2/pkg.

Price: $2.89 Special Price: $2.17

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Mini E/Z Link For .062'']]> http://www.hobbypeople.net/index.php/dubro-mini-e-z-link-for-062.html Dubro Mini E/Z Link For .062" Snap fit on to .062" wire, simply bend 90 degree angle on pushrod and install Mini E/Z Link on to pushrod (no Z Bend required). Super lightweight design, ideal for indoor, park flyers and 1/2A aircraft. 0.06 grams/ea. approx. 4/pkg.

Price: $1.47 Special Price: $1.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Mini Kwik Links w/12 in Rod (5)]]> http://www.hobbypeople.net/index.php/dubro-mini-kwik-links-w-12-in-rod-5.html Dubro Mini Kwik Links w/12 in Rod (5)

Features Du-Bro Mini Nylon Kwik Link on a .072 diameter 12 rod with 3/4 2-56 thread on one end.

Price: $3.78 Special Price: $2.84

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Mini Nylon Hinge (15)]]> http://www.hobbypeople.net/index.php/dubro-mini-nylon-hinge-15.html Dubro Mini Nylon Hinge (15)

Mini Hinge measurements: 7/16 (11mm) Wide X 1 1/8 (28mm) Long.Precision molded, inspected and assembled with locked in hinge pin.Flash free, simple to install. Hinges have 6 holes on each side formaximum holding power.

Includes 15 hinges

Price: $4.25 Special Price: $3.19

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Mini Nylon Hinges (6)]]> http://www.hobbypeople.net/index.php/dubro-mini-nylon-hinges-6.html Dubro Mini Nylon Hinges (6)

Mini Nylon Hinges

Mini Hinge measurements: 7/16 (11mm) Wide X 1 1/8 (28mm) Long.Precision molded, inspected and assembled with locked in hinge pin.Flash free, simple to install. Hinges have 6 holes on each side formaximum holding power.

Includes 6 hinges

Price: $2.15 Special Price: $1.61

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Mini Steel Push Rod 20 in Long]]> http://www.hobbypeople.net/index.php/dubro-mini-steel-push-rod-20-in-long.html Dubro Mini Steel Push Rod 20 in Long

This is a Lightweight pushrod assembly ideal for 1/2A applications. Theassembly consists of a plastic outer tube, steel pushrods, plastic clevis'and spring threads.

Price: $2.99 Special Price: $2.24

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Mini-Nylon Kwik Links (2)]]> http://www.hobbypeople.net/index.php/dubro-mini-nylon-kwik-links-2.html Dubro Mini-Nylon Kwik Links (2)

These sure-lock Nylon Kwik-Links are self threading nylon for 2-56 rods or threaded couplers. Mini Nylon Kwik Links are perfect for 1/2A airplanes or any throttle hook-up.

Price: $0.99 Special Price: $0.74

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Mini-Nylon Kwik Links 12in 2-56 Rod]]> http://www.hobbypeople.net/index.php/dubro-mini-nylon-kwik-links-12in-2-56-rod.html Dubro Mini-Nylon Kwik Links 12in 2-56 Rod

Features Du-Bro Mini Nylon Kwik Link on a .072 diameter 12 rod with 3/4 2-56 thread on one end.

Price: $0.95 Special Price: $0.71

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Mix It Stix (25)]]> http://www.hobbypeople.net/index.php/dubro-mix-it-stix-25.html Dubro Mix It Stix (25)

These sticks are handy to have when mixing paint or epoxy.

Price: $1.35 Special Price: $1.01

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro No. 10 Flat Washers]]> http://www.hobbypeople.net/index.php/dubro-no-10-flat-washers.html

This package of No. 10 size washers includes 4 No. 10 Flat washers and 4 No. 10 split washers.

Price: $0.99 Special Price: $0.74

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro No. 4 Nylon Flat Washers]]> http://www.hobbypeople.net/index.php/dubro-no-4-nylon-flat-washers.html

 

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro No. 4 x 1'' Socket Head Sheet Metal Screws (8)]]> http://www.hobbypeople.net/index.php/no-4-x-1-socket-head-sheet-metal-screws-8.html

867044 No. 4 x 1" Socket Head Sheet Metal Screws (8)

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro No. 6 Nylon Flat Washer (8)]]> http://www.hobbypeople.net/index.php/dubro-no-6-nylon-flat-washer-8.html

Price: $1.10 Special Price: $0.83

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro No. 6 x 1/2'' Socket Head Sheet Metal Screws (8)]]> http://www.hobbypeople.net/index.php/no-6-x-1-2-socket-head-sheet-metal-screws-8.html

867045 No. 6 x 1/2" Socket Head Sheet Metal Screws (8)

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro No. 8 Flat Washer (8)]]> http://www.hobbypeople.net/index.php/dubro-no-8-flat-washer-8.html

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Nose Gear Mounting Blocks]]> http://www.hobbypeople.net/index.php/dubro-nose-gear-mounting-blocks.html

Dubro Nose Gear Mounting Blocks

Dubro Nylon Nose Gear Mounting Block For 5/32'' wire.

Includes two nylon blocks, four bolts, lock washers, nuts, one spacer.

Price: $2.57 Special Price: $1.93

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Pull-Pull System - 2-56]]> http://www.hobbypeople.net/index.php/dubro-pull-pull-system-2-56.html

Dubro Pull-Pull System - 2-56

These Pull-Pull systems are available in two sizes, 2-56 and 4-40. It comes complete with 15 feet of nylon coated cable and all mounting hardware. Ideal for pull-pull installations on rudder, elevator, tail wheels, etc. (22 piece set)

Price: $8.09 Special Price: $6.07

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Pull-Pull System - 4-40]]> http://www.hobbypeople.net/index.php/dubro-pull-pull-system-4-40.html

Dubro Pull-Pull System - 4-40

This Pull-Pull system comes complete with 15 feet of nylon coated cable and all mounting hardware. Ideal for pull-pull installations on rudder, elevator, tail wheels, etc. (22 piece set)

Price: $10.08 Special Price: $7.56

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Pushrod Exit - 4-40 Pushrods, .093'' (4 Pkg)]]> http://www.hobbypeople.net/index.php/dubro-pushrod-exit-4-40-pushrods-093-4-pkg.html

 

Price: $1.89 Special Price: $1.42

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Semi-Scale Tailwheel System 20-60 Size Aircraft]]> http://www.hobbypeople.net/index.php/dubro-semi-scale-tailwheel-system-20-60-size-aircraft.html Dubro Semi-Scale Tailwheel System 20-60 Size Aircraft The Dubro complete ready-to-install Semi-Scale Tailwheel System is durable and great looking. Comes with rudder bracket and springs for control between rudder and tailwheel steering. Tailwheel included. [Length = 4.25" / Height = 2.375" / Wheel Dia. = 1" / Weight = 18.5 grams]

Price: $10.97 Special Price: $8.23

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Semi-Scale Tailwheel System 40-90 Size Aircraft]]> http://www.hobbypeople.net/index.php/dubro-semi-scale-tailwheel-system-40-90-size-aircraft.html

Dubro Semi-Scale Tailwheel System 40-90 Size Aircraft The Dubro complete ready-to-install Semi-Scale Tailwheel System is durable and great looking. Comes with rudder bracket and springs for control between rudder and tailwheel steering. Tailwheel included. [Length = 4.875" / Height = 2.75" / Wheel Dia. = 1.1875" / Weight = 20.5 grams]

Price: $14.28 Special Price: $10.71

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Servo Arm - XL/ Futaba 3108M, Hitec HS-50&HS-55]]> http://www.hobbypeople.net/index.php/dubro-servo-arm-xl-futaba-3108m-hitec-hs-50andhs-55.html

Dubro Servo Arm - XL/ Futaba 3108M, Hitec HS-50&HS-55

AT LAST, servo arms long enough for the extra throw needed on the electric 3D airplanes!

The DU-BRO Micro Servo Arm XL includes (4) single arms, as well as (2) double arms. These arms have had extra special attention given to weight, strength and performance. Made from 100% virgin nylon, they can stand up to the stress of 3D aerobatics and still remain lightweight. The Micro Servo Arm XL comes in (4) different versions to accommodate various micro servos on the market.

This version works on the following servos:

  • Futaba 3108M
  • Hitec HS-50 / HS-55
  • E-Flite S75

 

Price: $6.93 Special Price: $5.20

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Servo Arm - XL/Hitec HS56HB / HS65HB-MG]]> http://www.hobbypeople.net/index.php/dubro-servo-arm-xl-hitec-hs56hb-hs65hb-mg.html

Dubro Servo Arm - XL/Hitec HS56HB / HS65HB-MG The arms measure 1" from the center to the outer edge. They fit the Hitec HS-56HB, HS-65HB, and HS65MG servos. AT LAST, servo arms long enough for the extra throw needed on the electric 3D airplanes! The DU-BRO Micro Servo Arm XL includes (4) single arms, as well as (2) double arms. These arms have had extra special attention given to weight, strength and performance. Made from 100% virgin nylon, they can stand up to the stress of 3D aerobatics and still remain lightweight.

Price: $6.93 Special Price: $5.20

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Servo Arm Full Dual (Airtronics) 1 Pkg]]> http://www.hobbypeople.net/index.php/dubro-servo-arm-full-dual-airtronics-1-pkg.html

Price: $9.99 Special Price: $7.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Servo Arms - Futaba (8)]]> http://www.hobbypeople.net/index.php/dubro-servo-arms-futaba-8.html

Dubro Servo Arms - Futaba (8)

Designed for use in aircraft, car, boat, & helicopter models. Unlike conventional servo arms, they are made of long fiber composites for added strength. Longer versions have increased throw allowing for greater movement in controls.

Price: $11.99 Special Price: $8.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Servo Arms - JR & Airtronics (8)]]> http://www.hobbypeople.net/index.php/dubro-servo-arms-jr-and-airtronics-8.html

Dubro Servo Arms - JR & Airtronics (8)

Designed for use in aircraft, car, boat, & helicopter models. Unlike conventional servo arms, they are made of long fiber composites for added strength. Longer versions have increased throw allowing for greater movement in controls.

Price: $12.50 Special Price: $9.38

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Servo Arms - Long Dual Airtronics (2/Pkg)]]> http://www.hobbypeople.net/index.php/dubro-servo-arms-long-dual-airtronics-2-pkg.html

Dubro Long Dual Servo Arms

for Airtronics Servos

This is a set of two Dubro Long Dual Servo Arms for Airtronics Servos. A new servo arm design for large aircraft. This dual arm allows for straight and in-line movement of the control surface. Made of long fiber composites, this arm is super strong and will provide the maximum security. The Long Dual Servo Arms include heavy duty ball links for 4-40 pushrods and assembly hardware. The arms have 3 mounting holes for increased or decreased servo throw.

Features and Specifications:

• Mounting Spline Compatible with Airtronics/Sanwa Servos

• Designed for Use with Large Aircraft

• Dual Arm Allows for Straight and In-Line Movement of the Control Surface

• Made of Long Fiber Composites for Incredible Strength

• Includes Heavy Duty Ball Link for 4-40 Pushrods and Assembly Hardware

• Length From Center to Outer Mounting Hole is 1.343 Inches (34.13mm)

• Package Includes Two Long Dual Servo Arms and Two 4-40 Swivel Ball Links and Assembly Hardware

*Does not include servo. Servo shown for illustrative purposes only.

Price: $9.99 Special Price: $7.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Servo Mounting Hardware - Small]]> http://www.hobbypeople.net/index.php/dubro-servo-mounting-hardware-small.html

Dubro Servo Mounting Hardware - Small

Du-Bro RC Small Servo Mounting Hardware

Small servo mounting hardware. 60 pieces, enough for 5 servos. 20 sheet metal screws, 20 flat washers, 20 spacers.

Price: $2.42 Special Price: $1.82

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Solder Kwik Link (2)]]> http://www.hobbypeople.net/index.php/dubro-solder-kwik-link-2.html

Dubro Solder Kwik Link (2)

Solder Kwik-Links are nickel plated making a strong, attractive and easy to solder connector for servo or horn. 2-56 Solder Kwik-Link designed for use with .072 diameter wire, link guards included.

Price: $1.37 Special Price: $1.03

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 1-1/2'' Black]]> http://www.hobbypeople.net/index.php/dubro-spinner-1-1-2-black.html Dubro Spinner - 1-1/2" Black

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $4.10 Special Price: $3.08

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 1-1/2'' Blue]]> http://www.hobbypeople.net/index.php/spinner-1-1-2-blue.html

Price: $4.10 Special Price: $3.08

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 1-1/2'' Red]]> http://www.hobbypeople.net/index.php/dubro-spinner-1-1-2-red.html Dubro Spinner - 1-1/2" Red

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $4.10 Special Price: $3.08

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 1-1/2'' White]]> http://www.hobbypeople.net/index.php/dubro-spinner-1-1-2-white.html Dubro Spinner - 1-1/2" White

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $4.10 Special Price: $3.08

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 1-1/2'' Yellow]]> http://www.hobbypeople.net/index.php/dubro-spinner-1-1-2-yellow.html Dubro Spinner - 1-1/2" Yellow

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $4.10 Special Price: $3.08

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 1-3/4'' Black]]> http://www.hobbypeople.net/index.php/dubro-spinner-1-3-4-black.html Dubro Spinner - 1-3/4" Black

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $4.94 Special Price: $3.71

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 1-3/4'' Blue]]> http://www.hobbypeople.net/index.php/dubro-spinner-1-3-4-blue.html

Dubro Spinner - 1-3/4" Blue

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $4.94 Special Price: $3.71

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 1-3/4'' Red]]> http://www.hobbypeople.net/index.php/dubro-spinner-1-3-4-red.html

Dubro Spinner - 1-3/4" Red

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $4.94 Special Price: $3.71

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 1-3/4'' White]]> http://www.hobbypeople.net/index.php/dubro-spinner-1-3-4-white.html

Dubro Spinner - 1-3/4" White

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $4.94 Special Price: $3.71

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 1-3/4'' Yellow]]> http://www.hobbypeople.net/index.php/dubro-spinner-1-3-4-yellow.html Dubro Spinner - 1-3/4" Yellow

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $4.94 Special Price: $3.71

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2'' 3-Blade White]]> http://www.hobbypeople.net/index.php/dubro-spinner-3-blade-2-white.html

Dubro Spinner - 3-Blade 2" White

Simple, easy and safe to install. Each Spinner comes with 4 shaft adapters. (6mm, 1/4, 7mm, and 5/16) Features a unique, nylon insert lock nut design for attaching the back plate and spinner - giving a solid & secure hold. Designed with safety in mind.

Price: $7.72 Special Price: $5.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2'' Black]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-black.html Dubro Spinner - 2" Black

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $5.67 Special Price: $4.25

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2'' Blue]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-blue.html Dubro Spinner - 2" Blue

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $5.67 Special Price: $4.25

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2'' Red]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-red.html Dubro Spinner - 2" Red

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $5.67 Special Price: $4.25

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2'' White]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-white.html

Dubro Spinner - 2" White

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $5.67 Special Price: $4.25

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2'' Yellow]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-yellow.html Dubro Spinner - 2" Yellow

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $5.67 Special Price: $4.25

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-1/2'' Black]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-1-2-black.html Dubro Spinner - 2-1/2" Black

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $7.04 Special Price: $5.28

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-1/2'' Blue]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-1-2-blue.html Dubro Spinner - 2-1/2" Blue

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $7.04 Special Price: $5.28

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-1/2'' Red]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-1-2-red.html

Dubro Spinner - 2-1/2" Red

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $7.04 Special Price: $5.28

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-1/2'' Three-Blade Black]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-1-2-three-blade-black.html

 

Price: $9.14 Special Price: $6.86

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-1/2'' Three-Blade White]]> http://www.hobbypeople.net/index.php/spinner-2-1-2-three-blade-white.html

 

Price: $9.14 Special Price: $6.86

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-1/2'' White]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-1-2-white.html Dubro Spinner - 2-1/2" White

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $7.04 Special Price: $5.28

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-1/2'' Yellow]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-1-2-yellow.html Dubro Spinner - 2-1/2" Yellow

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $7.04 Special Price: $5.28

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-1/4'' Black]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-1-4-black.html

Dubro Spinner - 2-1/4" Black

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $6.30 Special Price: $4.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-1/4'' Blue]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-1-4-blue.html

Dubro Spinner - 2-1/4" Blue

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $6.30 Special Price: $4.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-1/4'' Red]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-1-4-red.html

Dubro Spinner - 2-1/4" Red

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $6.30 Special Price: $4.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-1/4'' White]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-1-4-white.html

Dubro Spinner - 2-1/4" White

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $6.30 Special Price: $4.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-1/4'' Yellow]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-1-4-yellow.html Dubro Spinner - 2-1/4" Yellow

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $6.30 Special Price: $4.73

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-3/4'' Black]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-3-4-black.html

Dubro Spinner - 2-3/4" Black

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $8.09 Special Price: $6.07

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-3/4'' Blue]]> http://www.hobbypeople.net/index.php/spinner-2-3-4-blue.html

866436 Spinner - 2-3/4" Blue

Price: $8.09 Special Price: $6.07

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-3/4'' Red]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-3-4-red.html

Dubro Spinner - 2-3/4" Red

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $8.09 Special Price: $6.07

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 2-3/4'' White]]> http://www.hobbypeople.net/index.php/dubro-spinner-2-3-4-white.html

Dubro Spinner - 2-3/4" White

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $8.09 Special Price: $6.07

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 3'' 3-Blade Black]]> http://www.hobbypeople.net/index.php/dubro-spinner-3-three-blade-black.html

Dubro 3 Inch Three-Blade Spinner (Black)

This is a Dubro 3 Inch Three-Blade Spinner (Black). Simple, easy and safe to install. This durable nylon spinner includes four shaft adapters and features a unique, nylon insert lock nut design for attaching the back plate and spinner, giving a solid and secure hold. Designed with safety in mind.

Features:

• Durable Nylon Spinner Cone and Backplate

• Nylon Insert Lock Nut Design for Attaching the Spinner Cone to the Backplate

• Includes Four Shaft Adapters (6mm, 1/4, 7mm and 5/16)

• For Use with 3-Bladed Propellers

Specifications:

• Diameter: 3 Inches

• Backplate Thickness: 1/4 Inch

• Crankshaft Hole: 3/8" (Includes Adapters to Fit Smaller Crankshafts)

Price: $10.97 Special Price: $8.23

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 3'' Black]]> http://www.hobbypeople.net/index.php/spinner-3-black.html

866475 Spinner - 3" Black

Price: $8.66 Special Price: $6.50

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 3'' Blue]]> http://www.hobbypeople.net/index.php/spinner-3-blue.html

866437 Spinner - 3" Blue

Price: $8.66 Special Price: $6.50

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 3'' Red]]> http://www.hobbypeople.net/index.php/dubro-spinner-3-red.html Dubro Spinner - 3" Red

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $8.66 Special Price: $6.50

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Spinner - 3'' White]]> http://www.hobbypeople.net/index.php/dubro-spinner-3-white.html

Dubro Spinner - 3" White

There's no need to use a hammer, with Dubro's easy on/easy off spinners.Just press-fit the nylon lock nuts to the backplate, align the nose cone coreto the backplate with the four included pins, and secure the nosecone withthe included socket head screws. Fast, easy and effective. Each cone comescomplete with the mounting hardware and four shaft adapters.

Price: $8.66 Special Price: $6.50

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Steel Control Rod]]> http://www.hobbypeople.net/index.php/dubro-steel-control-rod.html Dubro Steel Control Rod

This is a Pushrod assembly which has many uses. It has a plastic outer sleevewhich houses and stiffens the inner 2-56 music wire pushrod. It has a threadedclevis and a solder clevis for attaching to the control surface and servo.

Price: $2.63 Special Price: $1.97

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Steel Landing Gear Straps]]> http://www.hobbypeople.net/index.php/dubro-steel-landing-gear-straps.html Dubro Steel Landing Gear Straps

Zinc plated steel - light and strong. Includes (4) straps and (8) 2 x 7/26 slotted sheet metal screws. Measures 3/4.

Price: $1.16 Special Price: $0.87

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Steerable Nose Gear 5/32 Bent]]> http://www.hobbypeople.net/index.php/dubro-steerable-nose-gear-5-32-bent.html Dubro Steerable Nose Gear 5/32 Bent

Quality, shock absorbing nose gear 5/32 (4mm) heavy duty wire. Complete with nylon nose gear blocks, steering arm and all hardware.

Price: $5.72 Special Price: $4.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Steerable Nose Gear 5/32 Strut]]> http://www.hobbypeople.net/index.php/dubro-steerable-nose-gear-5-32-strut.html Dubro Steerable Nose Gear 5/32 Strut

Quality, shock absorbing nose gear 5/32 (4mm) heavy duty wire. Complete with nylon nose gear blocks, steering arm and all hardware.

Price: $5.72 Special Price: $4.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Steering Arm 1-1/4 in]]> http://www.hobbypeople.net/index.php/dubro-steering-arm-1-1-4-in.html Dubro Steering Arm 1-1/4 in

1 1/4 (31.7mm) steering arm assembly. Nylon steering arm with bushing and set screw fits 5/32 (4mm) nose gear wire.

Price: $1.79 Special Price: $1.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Steering Arm Assembly 1-1/4]]> http://www.hobbypeople.net/index.php/dubro-steering-arm-assembly-1-1-4.html Dubro Steering Arm Assembly 1-1/4

1 1/4 (31.7mm) steering arm assembly. Nylon steering arm with bushing and set screw fits 5/32 (4mm) nose gear wire. Snap on E/Z Connector included.

Price: $2.73 Special Price: $2.05

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Strip Aileron Horn Wire Connector]]> http://www.hobbypeople.net/index.php/dubro-strip-aileron-horn-wire-connector.html Dubro Strip Aileron Horn Wire Connector

Simplifies servo link hook-ups. Includes (2) 3-32 Dura-Collars, (2) Nylon Horn Connectors, and (2) 4-40 x 1/8 Slotted Screws. For .093 wire.

Price: $2.00 Special Price: $1.50

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Strip Aileron Linkage 1/2A (Qty 1)]]> http://www.hobbypeople.net/index.php/dubro-strip-aileron-linkage-1-2a-qty-1.html

 

Price: $3.68 Special Price: $2.76

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Strip Aileron Linkage Hook-Up]]> http://www.hobbypeople.net/index.php/dubro-strip-aileron-linkage-hook-up.html

Dubro Strip Aileron Linkage Hook-Up

No shrink, no stretch, free running, and fully adjustable at control horn. Complete 31 assembly includes 1 ea Solder Link, Kwik Link, Nylon Sleeve, 30 2-56 Rods and 2 link guards.

Price: $5.79 Special Price: $4.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Super Strength Servo Arms]]> http://www.hobbypeople.net/index.php/dubro-super-strength-servo-arms.html

Dubro Super Strength Servo Arms

Designed for use in aircraft, car, boat, & helicopter models. Unlike conventional servo arms, they are made of long fiber composites for added strength. Longer versions have increased throw allowing for greater movement in controls.Designed for use in aircraft, car, boat, & helicopter models. Unlike conventional servo arms, they are made of long fiber composites for added strength. Longer versions have increased throw allowing for greater movement in controls

Price: $12.50 Special Price: $9.38

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Super Strength Servo Arms - Airtnx & JR]]> http://www.hobbypeople.net/index.php/dubro-super-strength-servo-arms-airtnx-and-jr.html

Dubro Super Strength Servo Arms - Airtnx & JR

Designed for use in aircraft, car, boat, & helicopter models. Unlike conventional servo arms, they are made of long fiber composites for added strength. Longer versions have increased throw allowing for greater movement in controls. Designed for use in aircraft, car, boat, & helicopter models. Unlike conventional servo arms, they are made of long fiber composites for added strength. Longer versions have increased throw allowing for greater movement in controls.

Price: $9.92 Special Price: $7.44

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Super Strength Servo Arms - Futaba]]> http://www.hobbypeople.net/index.php/dubro-super-strength-servo-arms-futaba.html

Dubro Super Strength Servo Arms - Futaba

Designed for use in aircraft, car, boat, & helicopter models. Unlike conventional servo arms, they are made of long fiber composites for added strength. Longer versions have increased throw allowing for greater movement in controls.Designed for use in aircraft, car, boat, & helicopter models. Unlike conventional servo arms, they are made of long fiber composites for added strength. Longer versions have increased throw allowing for greater movement in controls.

 

  • Short: Mounting holes at: 7, 10 and 12mm.
  • Long: Mounting holes at: 8, 10, 13, 16, and 19mm
  • Dual: Mounting holes at: 6, 10, 12, 16, and 18mm
  • 3-arm: Mounting holes at: 7, 10, 13, 16, and 19mm

 

Price: $9.92 Special Price: $7.44

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Super Strength Servo Arms - Hitec,Tower]]> http://www.hobbypeople.net/index.php/dubro-super-strength-servo-arms-hitec-tower.html

Dubro Super Strength Servo Arms

for Hitec and Tower Servos

Designed for use in aircraft, car, boat, & helicopter models. Unlike conventional servo arms, they are made of long fiber composites for added strength. Longer versions have increased throw allowing for greater movement in controls.Designed for use in aircraft, car, boat, & helicopter models. Unlike conventional servo arms, they are made of long fiber composites for added strength. Longer versions have increased throw allowing for greater movement in controls.

Features and Specifications:

• Fiberglass-Reinforced Composite Plastic

• 4 Short and 2 Long Single Arms

• 1 Long Dual Arm

• 1 Long Three Arm

The 4 short arms feature mounting holes at: 7, 10 and 12mm. The 2 long arms feature mounting holes at: 8, 10, 13, 16, and 19mm. The long dual arm features mounting holes at: 6, 10, 12, 16, and 18mm and the long three arm features holes at 7, 10, 13, 16, and 19mm.

Price: $9.92 Special Price: $7.44

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Swivel Ball Link 2-56]]> http://www.hobbypeople.net/index.php/dubro-swivel-ball-link-2-56.html Dubro Swivel Ball Link 2-56

These high quality ball links feature burnished brass swivel balls for smooth operation. Complete with socket head cap screw, brass shim and hex nut.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Swivel Ball Link 2-56 for 4-40 Rod (1)]]> http://www.hobbypeople.net/index.php/dubro-swivel-ball-link-2-56-for-4-40-rod-1.html Dubro Swivel Ball Link 2-56 for 4-40 Rod (1)

These high quality ball links feature burnished brass swivel balls for smooth operation. Complete with socket head cap screw, brass shim and hex nut.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Swivel Ball Links 2-56 (12)]]> http://www.hobbypeople.net/index.php/swivel-ball-links-2-56.html

877829 Swivel Ball Links 2-56

Price: $17.49 Special Price: $13.12

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro T Pin 1 in]]> http://www.hobbypeople.net/index.php/dubro-t-pin-1-in.html Dubro T Pin 1 in

These pins are .030 diameter. These T-Pins are a must for all model building. Holds parts in place while gluing, sheeting, laminating, assembly, etc. An all around building aid. Strong, smooth and sharp, in 3 popular sizes.

Price: $3.57 Special Price: $2.68

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro T Pin 1-1/2 in]]> http://www.hobbypeople.net/index.php/dubro-t-pin-1-1-2-in.html Dubro T Pin 1-1/2 in

.043 diameter. These T-Pins are a must for all model building. Holds parts in place while gluing, sheeting, laminating, assembly, etc. An all around building aid. Strong, smooth and sharp, in 3 popular sizes.

Price: $5.67 Special Price: $4.25

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro T Pin 1-1/4 in]]> http://www.hobbypeople.net/index.php/dubro-t-pin-1-1-4-in.html Dubro T Pin 1-1/4 in

.036 diameter. These T-Pins are a must for all model building. Holds parts in place while gluing, sheeting, laminating, assembly, etc. An all around building aid. Strong, smooth and sharp, in 3 popular sizes.

Price: $3.89 Special Price: $2.92

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tail Wheel Bracket - .40 Size]]> http://www.hobbypeople.net/index.php/dubro-tail-wheel-bracket-40-size.html

Dubro Tail Wheel Bracket - .40 Size

(1/16 axle dia. 1.5mm) The Tailwheel Brackets are made of lightweight durable nylon. Available in three sizes to fit most airplanes from .40 size to large scale. Includes 1 bracket, 1 wire form, 1 dura-collar and 3 flat washers.

Price: $2.63 Special Price: $1.97

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tail Wheel Bracket - .60 Size]]> http://www.hobbypeople.net/index.php/dubro-tail-wheel-bracket-60-size.html Dubro Tail Wheel Bracket - .60 Size

(1/16 axle dia. 1.5mm) The Tailwheel Brackets are made of lightweight durable nylon. Available in three sizes to fit most airplanes from .40 size to large scale. Includes 1 bracket, 1 wire form, 1 dura-collar and 3 flat washers.

Price: $3.41 Special Price: $2.56

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tailwheel System - 90-120 Semi-Scale]]> http://www.hobbypeople.net/index.php/tailwheel-system-90-120-semi-scale.html

Dubro Semi-Scale Tailwheel System

for .60 to 1.20 Size Aircraft

This is a Dubro Semi-Scale Tailwheel System for .60 to 1.20 Size Aircraft. This complete ready-to-install semi-ccale tailwheel system is durable and great looking. Comes with rudder bracket and springs for control between rudder and tailwheel steering. Tailwheel included.

Features and Specifications:

• Ready to Install

• Includes Rudder Bracket and Springs

• Includes Tail Wheel

• Includes Mounting Screws and T-Nuts

• Length: 5.625"

• Height: 4"

• Tailwheel Diameter: 1.62"

• Weight: 35g (1.23oz)

Price: $17.58 Special Price: $13.19

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tap & Drill Set 10 Pc Standard]]> http://www.hobbypeople.net/index.php/tap-and-drill-set-10-pc-standard.html

Dubro 10-Piece Standard Tap and Drill Set

This is a Dubro 10-Piece Standard Tap and Drill Set. For the modeler who would like to have a complete set of taps and drills at a savings over purchasing individual sets. 10-piece standard tap and drill set comes complete with 2-56, 4-40, 6-32, 8-32 and 10-32 tap and drill sets. One complete set per package.

Features and Specifications:

• High-Quality Steel Taps and Drills

• Includes 5 Complete Tap and Drill Sets - 2-56, 4-40, 6-32, 8-32 and 10-32

• Includes Vinyl Storage Case

*Requires tap handle. Tap handle not included.

Price: $26.99 Special Price: $20.24

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tap & Drill Set 10Pc Metric]]> http://www.hobbypeople.net/index.php/tap-and-drill-set-10pc-metric.html

Dubro 10-Piece Metric Tap and Drill Set

This is a Dubro 10-Piece Metric Tap and Drill Set. For the modeler who would like to have a complete set of taps and drills at a savings over purchasing individual sets. 10-piece metric tap and drill set comes complete with 2mm, 2.5mm, 3.0mm, 4.0mm and 5.0mm tap and drill sets. One complete set per package.

Features and Specifications:

• High-Quality Steel Taps and Drills

• Includes 5 Complete Tap and Drill Sets - 2mm, 2.5mm, 3.0mm, 4.0mm and 5.0mm

• Includes Vinyl Storage Case

*Requires tap handle. Tap handle not included.

Price: $36.23 Special Price: $27.17

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tap & Drill Set 2-56]]> http://www.hobbypeople.net/index.php/dubro-2-56-tap-and-drill.html

Dubro 2-56 Tap & Drill

High quality steel Tap & Drill sets

Price: $7.56 Special Price: $5.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tap & Drill Set 2.5mm]]> http://www.hobbypeople.net/index.php/tap-and-drill-set-2-5mm.html

Dubro 2.5mm Tap and Drill Set

This is a Dubro 2.5mm Tap and Drill Set. This tap and drill set includes a 2.5mm tap and matching correctly sized drill bit.

Features and Specifications:

• High-Quality Steel Tap and Drill

• Includes 2.5mm Tap and Matching Correctly Sized Drill

*Requires tap handle. Tap handle not included.

Price: $8.40 Special Price: $6.30

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tap & Drill Set 2mm]]> http://www.hobbypeople.net/index.php/dubro-tap-and-drill-set-2mm.html

Dubro Tap & Drill Set 2mm

Price: $8.40 Special Price: $6.30

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tap & Drill Set 3mm]]> http://www.hobbypeople.net/index.php/dubro-tap-and-drill-set-3mm.html

Dubro Tap & Drill Set 3mm

Price: $8.40 Special Price: $6.30

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tap & Drill Set 4-40]]> http://www.hobbypeople.net/index.php/dubro-4-40-tap-and-drill.html

Dubro 4-40 Tap & Drill

High quality steel Tap & Drill sets

Price: $5.78 Special Price: $4.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tap & Drill Set 4mm]]> http://www.hobbypeople.net/index.php/dubro-tap-and-drill-set-4mm.html

Dubro Tap & Drill Set 4mm

Price: $8.40 Special Price: $6.30

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tap & Drill Set 6-32]]> http://www.hobbypeople.net/index.php/dubro-6-32-tap-and-drill.html Dubro 6-32 Tap & Drill

High quality steel Tap & Drill sets

Price: $5.78 Special Price: $4.34

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tap Handle - T-Style]]> http://www.hobbypeople.net/index.php/dubro-tap-handle-t-style.html

Dubro T-Style Tap Handle

This is a Dubro T-Style Tap Handle. The collett on DuBro's T-Style Tap Handle will securely hold the tap while tapping. T-Style handle provides plently of leverage for tapping. Will accomodate 2-56 to 1/4" taps, including metric taps within the corresponding size range.

Features and Specifications:

• Steel Construction

• Knurled Collet Holds Taps Securely

• T-Style Handle Provides Plenty of Leverage and is Comfortable to Use

• Use with Standard Taps Ranging in Size From 2-56 to 1/4" and Corresponding Metric Tap Sizes

Price: $7.25 Special Price: $5.44

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Threaded Couplers (2)]]> http://www.hobbypeople.net/index.php/dubro-threaded-couplers-2.html Dubro Threaded Couplers (2)

Designed for use with Du-Bro Kwik-Links and ball links. Item #111 are 2-56, threaded 3/4 (19mm)with an overall length of 1 1/4 (31.7mm). For 1/16 Diameter wire.

Price: $1.47 Special Price: $1.10

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Threaded Rod 30inch, 4-40 thread]]> http://www.hobbypeople.net/index.php/dubro-threaded-rod-30inch-4-40-thread.html Dubro Threaded Rod 30inch, 4-40 thread

Can be used in conjunction with nylon or steel Kwik-links or with ball links where extra long pushrods are needed. Bendable and strong. Rods are available with 3/4 (19mm) thread on one end.

Price: $1.05 Special Price: $0.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Threaded Rod, 2-56, 30'']]> http://www.hobbypeople.net/index.php/dubro-threaded-rod-2-56-30.html Dubro Threaded Rod, 2-56, 30"

Can be used in conjunction with nylon or steel Kwik-links or with ball links where extra long pushrods are needed. Bendable and strong. Rods are available with 3/4 (19mm) thread on one end.

Price: $0.89 Special Price: $0.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Throttle Cable Assembly]]> http://www.hobbypeople.net/index.php/dubro-throttle-cable-assembly.html

Dubro Throttle Cable Assembly

This is a control cable used between servo and your engine's throttle arm. It is very flexible, free running, and adjustable at the throttle arm.

Price: $2.63 Special Price: $1.97

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Treaded Lite Wheels 1-3/4'' (2)]]> http://www.hobbypeople.net/index.php/dubro-treaded-lite-wheels-1-3-4-2.html

Dubro Treaded Lite Wheels 1-3/4" (2) After 3 years of research and development, DuBro produced the tire for the 21st Century. These new wheels are lightweight, shock absorbing, fuel resistant and built extremely TUFF.

Price: $7.56 Special Price: $5.67

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Treaded Lite Wheels 2'' (2)]]> http://www.hobbypeople.net/index.php/dubro-treaded-lite-wheels-2-2.html

Dubro Treaded Lite Wheels 2" (2) After 3 years of research and development, DuBro produced the tire for the 21st Century. These new wheels are lightweight, shock absorbing, fuel resistant and built extremely TUFF.

Price: $8.09 Special Price: $6.07

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Treaded Lite Wheels 2-1/2'' (2)]]> http://www.hobbypeople.net/index.php/dubro-treaded-lite-wheels-2-1-2-2.html Dubro Treaded Lite Wheels 2-1/2" (2) After 3 years of research and development, DuBro produced the tire for the 21st Century. These new wheels are lightweight, shock absorbing, fuel resistant and built extremely TUFF.

Price: $9.19 Special Price: $6.89

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Treaded Lite Wheels 2-1/4'' (2)]]> http://www.hobbypeople.net/index.php/dubro-treaded-lite-wheels-2-1-4-2.html

Dubro Treaded Lite Wheels 2-1/4" (2) After 3 years of research and development, DuBro produced the tire for the 21st Century. These new wheels are lightweight, shock absorbing, fuel resistant and built extremely TUFF.

Price: $8.61 Special Price: $6.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Treaded Lite Wheels 2-3/4'' (2)]]> http://www.hobbypeople.net/index.php/dubro-treaded-lite-wheels-2-3-4-2.html

Dubro Treaded Lite Wheels 2-3/4" (2) After 3 years of research and development, DuBro produced the tire for the 21st Century. These new wheels are lightweight, shock absorbing, fuel resistant and built extremely TUFF.

Price: $9.87 Special Price: $7.40

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Treaded Lite Wheels 3'' (2)]]> http://www.hobbypeople.net/index.php/dubro-treaded-lite-wheels-3-2.html

Dubro Treaded Lite Wheels 3" (2) After 3 years of research and development, DuBro produced the tire for the 21st Century. These new wheels are lightweight, shock absorbing, fuel resistant and built extremely TUFF.

Price: $10.40 Special Price: $7.80

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Tru-Spin Balancer]]> http://www.hobbypeople.net/index.php/dubro-tru-spin-balancer.html

Dubro Tru-Spin Balancer

Du-Bro's Tru-Spin Prop Balancer is the most precise balancer on the market. With a specially designed locking cone securely centers and locks props on to the balancing shaft for utmost accuracy. Each cone is carefully inspected on a calibrator to make sure it is running true. The balancing shaft is manufactured out of hardened material and then is centerless ground giving precision balance every time. The prop balancer's aluminum wheels turn virtually friction free for precision accuracy. The Du-Bro Tru-Spin Prop Balancer will balance model airplane props of all sizes and weights, boat props, spinners, car wheels, helicopter rotor heads, jet fans, fly wheels, etc. Each balancer comes complete with easy to follow assembly and prop balancing instructions. Packaged in a reusable clamshell blister for storage. A truly precision instrument built for the modeler who expects the very best.

Price: $29.99 Special Price: $22.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Wing Bolt 1/4-20 x 2 in Long Nylon]]> http://www.hobbypeople.net/index.php/dubro-wing-bolt-1-4-20-x-2-in-long-nylon.html Dubro Wing Bolt 1/4-20 x 2 in Long Nylon

The outside hex head will fit your glo-plug/prop nut wrench, inside socket is made to fit standard allen wrenches. Both methods insure a safe, no-slip way to secure or loosen wing bolts.

Price: $1.73 Special Price: $1.30

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Wing Bolt 10-32 x 2 in Nylon]]> http://www.hobbypeople.net/index.php/dubro-wing-bolt-10-32-x-2-in-nylon.html Dubro Wing Bolt 10-32 x 2 in Nylon

The outside hex head will fit your glo-plug or prop nut wrench, inside socket is made to fit standard allen wrenches. Both methods insure a safe, no-slip way to secure or loosen wing bolts.

Price: $1.63 Special Price: $1.22

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Wing Bolts - 1/4-20 x 3'' Nylon XL]]> http://www.hobbypeople.net/index.php/dubro-wing-bolts-1-4-20-x-3-nylon-xl.html

Dubro Wing Bolts - 1/4-20 x 3" Nylon XL By popular demand, Dubro's 3" Wing Bolts XL provide a longer reach to secure your wings. The large profile 0.5" diameter head works with a phillips or slotted head screwdriver. 4/pkg.

Price: $2.36 Special Price: $1.77

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Wing Mounting Kit - 1/4-20 bolts & blocks]]> http://www.hobbypeople.net/index.php/dubro-wing-mounting-kit-1-4-20-bolts-and-blocks.html

Dubro Wing Mounting Kit - 1/4-20 bolts & blocks

The up to date way to fasten wings to fuselage. Includes nylon bolts, and nylon threaded blacks. 11 pc set.

Price: $2.94 Special Price: $2.21

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Wing Tip/ Tail Skid 2-3/8'' (2)]]> http://www.hobbypeople.net/index.php/dubro-wing-tip-tail-skid-2-3-8-2.html

Dubro Wing Tip/ Tail Skid 2-3/8" (2) Protect those wing tips and tails! Easily installed by using CA or epoxy with holes provided for screw mounting.

Price: $2.15 Special Price: $1.61

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Wing Tip/Tail Skid 1-1/4'' (2)]]> http://www.hobbypeople.net/index.php/dubro-wing-tip-tail-skid-1-1-4-2.html Dubro Wing Tip/Tail Skid 1-1/4" (2) Protect those wing tips and tails! Easily installed by using CA or epoxy with holes provided for screw mounting.

Price: $1.68 Special Price: $1.26

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Dubro Wing Tip/Tail Skid 2'' (2)]]> http://www.hobbypeople.net/index.php/dubro-wing-tip-tail-skid-2-2.html Dubro Wing Tip/Tail Skid 2" (2) Protect those wing tips and tails! Easily installed by using CA or epoxy with holes provided for screw mounting.

Price: $1.94 Special Price: $1.46

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Estes Taser Flying Model Rocket Launch Set]]> http://www.hobbypeople.net/index.php/estes-taser-flying-model-rocket-launch-set.html

Estes Taser Launch Set

Includes Electron Beam Launch Controller and Porta-Pad II Launch Pad!

This is an Estes Taser Launch Set. The Taser is a stunning rocket that's capable of subduing anything out there that's dangerous! The Taser Launch Set from Estes is an exciting, radically designed high-altitude rocket launch set from the E2X (Easy to Assemble) series. The rocket kit features a brightly colored one piece body tube, molded plastic fin set and bullet shaped nose cone. Simply glue a few rocket pieces together, apply the colorful self-stick decals and in less than an hour you'll be ready for the launch pad!

The Taser rocket is 16.5 inches tall. With its custom three-fin design, it climbs to an outta sight altitude of over 1,000 feet. A bright-colored 12 inch preassembled parachute returns this rocket back to the launch site. You'll be ready in minutes for another extreme launch experience!

Features and Specifications:

• Kit Type: E2X (Easy to Assemble)

• Length: 16.5in (41.9cm)

• Diameter: .98in (25mm)

• Estimated Weight: 1.5oz (42.5g)

• Plastic Fins, Self-Stick Decals and 12 Inch Parachute

• Recommended Engines (NOT included): A8-3 (First Flight), B4-4, B6-4, B6-6, C6-5 and C6-7 (NOT included)

• Projected Maximum Altitude: 1000ft (305m)

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.

Price: $26.49 Special Price: $21.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[FlyFly Hobby FW-190 EPO RTF 2.4G Mode 2]]> http://www.hobbypeople.net/index.php/fw-190-epo-rtf-2-4ghz-mode-2.html

FlyFly Hobby Focke-Wulf FW-190

RTF EPO Fighter with 2.4GHz Radio - Mode 2

This is a FlyFly Hobby Focke-Wulf FW-190 RTF EPO Fighter with 2.4GHz Radio - Mode 2. This model is molded from strong EPO foam and assembled and painted for that scale look. Aircraft is ready-to-fly and includes a 2.4GHz radio, micro servos, brushless outrunner motor, ESC, 4S Li-Po battery and charger! FlyFly Hobby are hand-crafted with quality components, well-built and great flying.

Specifications:

• Material: EPO Foam

• Wingpsan: 1400mm (55.12in)

• Weight: 1800g (3.96lbs)

• Length: 1100mm (43.30in)

• Wing Area: 35dm2 (3.77ft2)

Includes:

• 2.4GHz 4ch Radio

•12 x 9 3-Blade Propeller

• 14.8v 2200mAh 20c 4s Li-Po Battery

• Battery charger

• 600kv Brushless Outrunner Motor

• 45A Brushless ESC

• 4x Micro Servos

Price: $349.99 Special Price: $213.85

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hard Bodyz Roll Cage - Baja 5B Chrome]]> http://www.hobbypeople.net/index.php/hard-bodyz-roll-cage-baja-5b-chrome.html

Price: $149.99 Special Price: $99.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hi-Energy Receiver Battery 4.8V 1200mAh NiMH Flat JR/Z Conn]]> http://www.hobbypeople.net/index.php/hi-energy-receiver-battery-4-8v-1200mah-nimh-flat-jr-z-conn.html

Hi-Energy Receiver Battery 4.8V 1200mAh NiMH Flat JR/Z Conn Specifications

  • Weight 3.3oz 93g
  • Length 2.2in 56mm
  • Width 2in 50mm
  • Height 0.6in 14mm

Price: $16.99 Special Price: $9.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD Electron 6ch Receiver – Fut J, Neg Shift. Req Hitec Xtal]]> http://www.hobbypeople.net/index.php/hitec-rcd-electron-6ch-receiver-fut-j-neg-shift-req-hitec-xta.html

Hitec Electron 6 Micro FM Receiver

Negative Shift - Hitec/Futaba J (Requires Hitec Crystal)

This is a Hitec Electron 6 Micro FM Receiver Negative Shift receiver for Hitec/Futaba J (Requires Hitec Crystal). The 6-Channel Electron 6 micro FM dual conversion receiver weighs in at a mere 17 grams and promises to perform up to the solid reputation carried by all Hitec dual conversion receivers. Receiver is compatible with Hitec and Futaba dual conversion FM transmitters. Requires Hitec FM Dual Conversion Crystal (available separately).

Specifications:

• Type: 6-Channel Dual Conversion FM

• Range: 1+ Mile / 1.6 Km or More

• Operating Voltage 4.8 ~ 6.0 Volts

• Current Drain: 19 mA +/- 3.0 mA

• Size: 1.8 x 0.9 x 0.6 Inches (45.0 x 23.0 x 15.0mm)

• Weight: 0.6 Ounces (17g)

• Weight Without Case: 0.46 Ounces (13g)

Price: $19.98 Special Price: $9.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HFS-04MG Economy 72 4ch Neg Shft req xtal]]> http://www.hobbypeople.net/index.php/hitec-rcd-hfs-04mg-economy-72-4ch-neg-shft-req-xtal.html

Price: $9.98 Special Price: $4.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HS-50 – ATX (Old) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-50-atx-old-plug.html

Hitec HS-50 Super Feather

 Micro Servo (ATX Plug)

This is a Hitec HS-50 Super Feather Micro Servo (ATX Plug). The name says it all! The HS-50, Super Feather Servo is a modern miracle of miniaturization. Featuring precision components that have been engineered to provide long lasting trouble free service, the HS-50 is the perfect choice for any micro application from indoor R/C and hand launch gliders to ultra small electric park and yard flyers.

Specifications:

• Torque at 4.8v: 8.0oz-in (0.58kg-cm)

• Speed at 4.8v: 0.09sec/60º

• Weight: 0.21oz (5.95g)

• Dimensions: 0.82 x 0.44 x 0.86in (20.8 x 11.2 x 21.8mm)

• Gear Train: Plastic

• Bushing/Ball Bearing: None

• Motor Type: 3-Pole

• Connector Type: ATX (Old Style Black Airtronics Plug)

*This Servo Is Designed for Use with 4.8 Volts Only*

Price: $9.98 Special Price: $4.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HS-50 – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-50-fut-j-plug.html

Hitec HS-50 Super Feather

 Micro Servo (Futaba J Plug)

This is a Hitec HS-50 Super Feather Micro Servo (Futaba J Plug). The name says it all! The HS-50, Super Feather Servo is a modern miracle of miniaturization. Featuring precision components that have been engineered to provide long lasting trouble free service, the HS-50 is the perfect choice for any micro application from indoor R/C and hand launch gliders to ultra small electric park and yard flyers.

Specifications:

• Torque at 4.8v: 8.0oz-in (0.58kg-cm)

• Speed at 4.8v: 0.09sec/60º

• Weight: 0.21oz (5.95g)

• Dimensions: 0.82 x 0.44 x 0.86in (20.8 x 11.2 x 21.8mm)

• Gear Train: Plastic

• Bushing/Ball Bearing: None

• Motor Type: 3-Pole

• Connector Type: Futaba J

*This Servo Is Designed for Use with 4.8 Volts Only*

Price: $9.98 Special Price: $4.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HS-5975HB – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-5975hb-fut-j-plug.html

Hitec HS-5975HB Karbonite

Digital High-Speed Ball Bearing Coreless Servo (Futaba J Plug)

This is a Hitec HS-5975HB Karbonite Digital High-Speed Ball Bearing Coreless Servo (Futaba J Plug). The HS-5975HB kicks off a whole new line of Hitec Programmable Digital servos that feature our exclusive new, heavy duty, Karbonite gear train technology. Karbonite gears are four times stronger than the standard white nylon gears, and best of all, have virtually zero wear; even after 250,000 cycles when tested. The programmable digital circuit allows the user to set end and center points, deadband, speed, and more with the optional HFP-10 programmer. The HS-5975HB offers higher performance and durability at a fraction of our competitor's price. An excellent choice for helicopters and larger aerobatic aircraft.

Specifications:

• Torque at 4.8v: 90.0oz-in (6.48kg-cm)

• Torque at 6.0v: 108.0oz-in (7.78kg-cm)

• Speed at 4.8v: 0.13sec/60º

• Speed at 6.0v: 0.10sec/60º

• Weight: 1.76oz (49.9g)

• Dimensions: 1.58 x 0.79 x 1.46in (40.0 x 20.0 x 37.0mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Futaba J

Price: $79.99 Special Price: $40.00

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HS-5975HB – Hitec/JR/Z-ATX (new) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-5975hb-hitec-jr-z-atx-new-plug.html

Hitec HS-5975HB Karbonite

Digital High-Speed Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug)

This is a Hitec HS-5975HB Karbonite Digital High-Speed Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug). The HS-5975HB kicks off a whole new line of Hitec Programmable Digital servos that feature our exclusive new, heavy duty, Karbonite gear train technology. Karbonite gears are four times stronger than the standard white nylon gears, and best of all, have virtually zero wear; even after 250,000 cycles when tested. The programmable digital circuit allows the user to set end and center points, deadband, speed, and more with the optional HFP-10 programmer. The HS-5975HB offers higher performance and durability at a fraction of our competitor's price. An excellent choice for helicopters and larger aerobatic aircraft.

Specifications:

• Torque at 4.8v: 90.0oz-in (6.48kg-cm)

• Torque at 6.0v: 108.0oz-in (7.78kg-cm)

• Speed at 4.8v: 0.13sec/60º

• Speed at 6.0v: 0.10sec/60º

• Weight: 1.76oz (49.9g)

• Dimensions: 1.58 x 0.79 x 1.46in (40.0 x 20.0 x 37.0mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Hitec/JR/Airtronics Z

Price: $79.99 Special Price: $40.00

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HS-60 – ATX (Old) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-60-atx-old-plug.html

Hitec HS-60

Super Micro Servo (ATX Plug)

This is a Hitec HS-60 Super Micro Servo (ATX Plug). The HS-60 Super Micro servo is ideal for use in small park flyers and lightweight sport sailplanes, where a small servo is required.

Specifications:

• Torque at 4.8v: 15.4oz-in (1.1kg-cm)

• Torque at 6.0v: 18.0oz-in (1.3g-cm)

• Speed at 4.8v: 0.20sec/60º

• Speed at 6.0v: 0.16sec/60º

• Weight: 0.48oz (13.5g)

• Dimensions: 1.00 x 0.50 x 0.90in (25.4 x 12.7 x 22.9mm)

• Gear Train: Plastic

• Bushing/Ball Bearing: Bushing

• Motor Type: 3-Pole

• Connector Type: ATX (Old Style Airtronics Black Plug)

Price: $9.98 Special Price: $4.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HS-6965HB – Hitec/JR/Z-ATX (new) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-6965hb-hitec-jr-z-atx-new-plug.html

Hitec HS-6965HB Karbonite

Ultra-Speed Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug)

This is a Hitec HS-6965HB Karbonite Ultra-Speed Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug). One of the Karbonite digital servo series, the HS-6965HB is the fastest available. Providing a blinding fast .08 transit speed, instant torque and fantastic holding power, this servo is perfect for high performance heli tail rotor applications. Also ideal for aircraft up to 72” or up to 12 pounds when using just one servo per control surface.

Specifications:

• Torque at 4.8v: 91.6oz-in (6.6kg-cm)

• Torque at 6.0v: 111.0oz-in (7.9kg-cm)

• Speed at 4.8v: 0.10sec/60º

• Speed at 6.0v: 0.08sec/60º

• Weight: 1.83oz (52.0g)

• Dimensions: 1.57 x 0.78 x 1.45in (39.9 x 19.8 x 36.8mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Hitec/JR/Airtronics Z

Price: $69.98 Special Price: $34.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HS-6975HB – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-6975hb-fut-j-plug.html

Hitec HS-6975HB Karbonite

High-Speed Digital Ball Bearing Coreless Servo (Futaba J Plug)

This is a Hitec HS-6975HB Karbonite High-Speed Digital Ball Bearing Coreless Servo (Futaba J Plug). The HS-6975HB is technology at its finest. Ultra smooth, wicked fast and very powerful are word to describe this new servo. When you compare the performance with the price, you can understand why this servo is quickly becoming a favorite among high performance pilots. The Karbonite gears are virtually wear-free and provide up to 4 times the strength of nylon gears. The HS-6975HB is also extremely easy to program. Ideal for use in 1/10th monster trucks, 1/8th buggies and truggies and high performance aircraft up to 35 percent.

Specifications:

• Torque at 4.8v: 119.4oz-in (8.6kg-cm)

• Torque at 6.0v: 144.4oz-in (10.4kg-cm)

• Speed at 4.8v: 0.13sec/60º

• Speed at 6.0v: 0.10sec/60º

• Weight: 1.83oz (52.0g)

• Dimensions: 1.57 x 0.78 x 1.45in (39.9 x 19.8 x 36.8mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Futaba J

Price: $79.98 Special Price: $39.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HS-6975HB – Hitec/JR/Z-ATX (new) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-6975hb-hitec-jr-z-atx-new-plug.html

Hitec HS-6975HB Karbonite

High-Speed Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug)

This is a Hitec HS-6975HB Karbonite High-Speed Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug). The HS-6975HB is technology at its finest. Ultra smooth, wicked fast and very powerful are word to describe this new servo. When you compare the performance with the price, you can understand why this servo is quickly becoming a favorite among high performance pilots. The Karbonite gears are virtually wear-free and provide up to 4 times the strength of nylon gears. The HS-6975HB is also extremely easy to program. Ideal for use in 1/10th monster trucks, 1/8th buggies and truggies and high performance aircraft up to 35 percent.

Specifications:

• Torque at 4.8v: 119.4oz-in (8.6kg-cm)

• Torque at 6.0v: 144.4oz-in (10.4kg-cm)

• Speed at 4.8v: 0.13sec/60º

• Speed at 6.0v: 0.10sec/60º

• Weight: 1.83oz (52.0g)

• Dimensions: 1.57 x 0.78 x 1.45in (39.9 x 19.8 x 36.8mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Hitec/JR/Airtronics Z

Price: $79.98 Special Price: $39.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HS-765HB – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-765hb-fut-j-plug.html

Hitec HS-765HB Karbonite

Sail Control Servo (Futaba J Plug)

This is a Hitec HS-765HB Karbonite Sail Control Servo (Futaba J Plug). The HS-765HB sail arm servo has up to 140 degrees of travel and comes with a Heavy Duty 4.5 inch arm. With its dual ball bearing supported output shaft the HS-765HB will provide years of reliable service for your R/C sailing applications to 2 meters.

Specifications:

• Torque at 4.8v: 153.0oz-in (11.0kg-cm)

• Torque at 6.0v: 183.0oz-in (13.2kg-cm)

• Speed at 4.8v: 0.28sec/60º

• Speed at 6.0v: 0.23sec/60º

• Weight: 3.88oz (110g)

• Dimensions: 2.32 x 1.14 x 1.96in (58.9 x 28.9 x 49.7mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: 3-Pole

• Connector Type: Futaba J

Price: $39.98 Special Price: $19.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HS-925MG – ATX (Old) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-925mg-atx-old-plug.html

Hitec HS-925MG Metal Gear

High-Speed Ball Bearing Coreless Servo (ATX Plug)

This is a Hitec HS-925MG Metal Gear High-Speed Ball Bearing Coreless Servo (ATX Plug). This servos uses Hitec's unique metal gear train and coreless motor technology. The powerful HS-925MG is perfect for those high demand applications requiring a standard sized servo.

Specifications:

• Torque at 4.8v: 66.7oz-in (4.80kg-cm)

• Torque at 6.0v: 106.9oz-in (7.70kg-cm)

• Speed at 4.8v: 0.20sec/60º

• Speed at 6.0v: 0.11sec/60º

• Weight: 2.00oz (56.7g)

• Dimensions: 1.55 x 0.78 x 1.48in (39.4 x 19.8 x 37.6mm)

• Gear Train: Metal

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: ATX Plug (Old Style Airtronics Black Plug)

Price: $59.98 Special Price: $29.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HSC-5996TG – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hsc-5996tg-fut-j-plug.html

Hitec HS-5996TG Titanium Gear

High-Speed Digital Ball Bearing Coreless Servo (Futaba J Plug)

This is a Hitec HS-5996TG Titanium Gear High-Speed Digital Ball Bearing Coreless Servo (Futaba J Plug). This servo features a programmable digital amplifier, long life coreless motor with heat-sink case and super strong titanium gears. It's ideally suited for 1/10th scale cars and trucks, where high speed precision and durability are a must.

Specifications:

• Torque at 4.8v: 83.3oz-in (6.0kg-cm)

• Torque at 6.0v: 111.1oz-in (8.0kg-cm)

• Speed at 4.8v: 0.13sec/60º

• Speed at 6.0v: 0.10sec/60º

• Weight: 2.19oz (62.0g)

• Dimensions: 1.58 x 0.79 x 1.46in (40.0 x 20.0 x 37.0mm)

• Gear Train: Titanium

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Futaba J

Price: $99.98 Special Price: $49.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD HSC-5996TG – Hitec/JR/Z-ATX (new) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hsc-5996tg-hitec-jr-z-atx-new-plug.html

Hitec HS-5996TG Titanium Gear

High-Speed Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug)

This is a Hitec HS-5996TG Titanium Gear High-Speed Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug). This servo features a programmable digital amplifier, long life coreless motor with heat-sink case and super strong titanium gears. It's ideally suited for 1/10th scale cars and trucks, where high speed precision and durability are a must.

Specifications:

• Torque at 4.8v: 83.3oz-in (6.0kg-cm)

• Torque at 6.0v: 111.1oz-in (8.0kg-cm)

• Speed at 4.8v: 0.13sec/60º

• Speed at 6.0v: 0.10sec/60º

• Weight: 2.19oz (62.0g)

• Dimensions: 1.58 x 0.79 x 1.46in (40.0 x 20.0 x 37.0mm)

• Gear Train: Titanium

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Hitec/JR/Airtronics Z

Price: $99.98 Special Price: $49.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD Micro 555 5ch Receiver 72 ATX(old) PosShift Req Hitec]]> http://www.hobbypeople.net/index.php/hitec-rcd-micro-555-5ch-receiver-atx-old-pos-shift-req-hitec.html

Price: $15.98 Special Price: $7.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD Micro 555 5ch Receiver 72 Hit/Fut, Neg-Shift, Req Hite]]> http://www.hobbypeople.net/index.php/hitec-rcd-micro-555-5ch-receiver-72-hit-fut-neg-shift-req-hite.html

Price: $15.98 Special Price: $7.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD Mini 6S 72 RX 6Ch, AutoShift Req Hitec Xtal]]> http://www.hobbypeople.net/index.php/hitec-rcd-mini-6s-72-rx-6ch-autoshift-req-hitec-xtal.html

Hitec Mini 6S FM 72MHz Receiver

Single Conversion Auto-Shift (Requires Hitec Crystal)

This is a Hitec Mini 6S FM 72MHz Single Conversion Auto-Shift Receiver (Requires Hitec Crystal). The Mini 6S receiver meets or exceeds the performance level of any FM single conversion aircraft receiver on the market today. The Mini 6S provides glitch free performance in a small package making it the perfect choice for any application where a full range micro receiver is desirable. Requires Hitec FM Single Conversion Crystal (available separately).

Specifications:

• Type: 6-Channel Single Conversion FM w/Auto-Shift Technology

• Range: Full Range

• Operating Voltage 4.8 ~ 6.0 Volts

• Size: 1.4 x 1.0 x 0.7 Inches (36.5 x 25.4 x 17.7mm)

• Weight: 0.53Ounces (15g)

Price: $9.98 Special Price: $4.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hitec/RCD Spectra 72mhz Synth Module - Eclipse/Optic]]> http://www.hobbypeople.net/index.php/hitec-rcd-spectra-72mhz-synth-module-eclipse-optic.html

Hitec 72MHz Synthesized Spectra Module

This is a Hitec 72MHz Synthesized Spectra Module for Hitec Eclipse and Optic radio systems.

Price: $40.00 Special Price: $19.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobbico Reef Racer II RTR EP Boat]]> http://www.hobbypeople.net/index.php/hobbico-reef-racer-ii-rtr-ep-boat.html

Hobbico AquaCraft Reef Racer 2

Ready-to-Run Electric Mini Vee-Hull Boat

This is a Hobbico AquaCraft Reef Racer 2 Ready-to-Run Electric Mini Vee-Hull Boat. The super-quick vee-hull Reef Racer 2 comes complete and ready to run, with a durable hull and prepainted hatch, with factory-applied decals - there's even a painted driver figure! The Reef Racer 2 offers quick response and "turn-on-a-dime" handling - even at top speeds. Easily removable watertight covers that protect the electronics equipment and the Reef Racer 2's self-righting hull design ensure nonstop action! With its amazing maneuverability, the Reef Racer 2 is perfect for swimming pools, small ponds and lakes!

Features:

• Race Almost Anywhere - 15 Inches Long

• Fully Equipped and Ready to Run

• Electric Water-Cooled Motor with 2-Blade Propeller

• Watertight Covers

• Molded ABS Construction

Specifications:

• Motor: Water-Cooled 380-Size Motor

• Propeller: 25mm 2-Blade

• Length: 15 Inches (380mm)

• Width: 5.3 Inches (145mm)

• Height: 4 Inches (101mm)

What's Included:

• AquaCraft Reef Racer 2 - Ready-to-Run

• 2-Channel Radio System and ESC

• 7.2V 1100mAh NiMH Battery and 12V Charger

• Display Stand

Items Required, But Not Included:

• 8 'AA' Batteries for Transmitter

*Available in assorted colors/frequencies. Not able to guarantee specific color or frequency.

Price: $79.99 Special Price: $69.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 11.1V 1300mAh (3S) 30C LiPo Battery - T-Conn]]> http://www.hobbypeople.net/index.php/hobby-people-11-1v-1300mah-3s-30c-lipo-battery-t-conn.html

Hobby People 11.1V 3S 1300mAh 30C LiPo Battery

w/ T-Connector

This is the Hobby People 11.1V 3S 1300mAh 30C LiPo Battery with a T-Connector. While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

• Pack Dimensions: 19 x 31 x 88 mm

• Weight: 105g

• Plug: T-Connector

Price: $13.99 Special Price: $9.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 11.1V 2200mAh (3S) 30C LiPo Battery - T-Conn]]> http://www.hobbypeople.net/index.php/hobby-people-11-1v-2200mah-3s-30c-lipo-battery-t-conn.html

Hobby People 11.1V 3S 2200mAh 30C LiPo Battery

W/ T-Connector

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

• Pack Dimensions: 25 x 35 x 104 mm

• Weight: 175g

• Plug: T-Connector

Price: $16.99 Special Price: $14.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 11.1V 2200mAh 65C Airplane LiPo T-Conn]]> http://www.hobbypeople.net/index.php/hobby-people-11-1v-2200mah-65c-airplane-lipo-t-conn.html

HP-MDL 11.1V 2200mAh 65C Li-Po Battery

Airplane Pack with T-Connector

Higher Performance for your aircraft! The 3S 2200mAh Li-Po is the most popular battery size for aircraft, but sometimes a sport pack just won't do. This battery has the power capability of up to 143 amps! That is a LOT of power from a 2200mAh Battery! Perfect for small racing aircraft, EDF Jets with high performance fans and any application where the maximum current draw exceeds the typical 40-60 amps that most 2200 sport packs are limited to.

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 65C, this is the LiPo battery you have been waiting for.

Specifications:

• Pack Dimensions: 23 x 34 x 105 mm (0.9 x 1.3 x 4.1 in)

• Weight: 215 g (7.6 ounces)

• Plug: T-Conn

Price: $49.99 Special Price: $45.00

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 11.1V 3S 3200mAh 20C Car Battery LiPo Hard Case T-Conn]]> http://www.hobbypeople.net/index.php/hobby-people-11-1v-3200mah-20c-car-battery-lipo-hard-case-t-conn.html

HP-MDL 11.1V 3200mAh 20C Li-Po Car Battery

Hard Case with T-Connector

This is the HP-MDL 11.1V 3200mAh 20C Li-Po Car Batttery Pack with Hard Case and T-Connectors. While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance.

This affordable 3S Li-Po Battery Pack is perfect for R/C Cars. With it's good run time, reliability, and high quality you will be getting more bang for your buck!

Specifications:

• Pack Dimensions: 23.5 x 46.5 x 138.5 mm (0.9 x 1.8 x 5.5 in)

• Weight: 280 g (9.9 ounces)

• Plug: T-Conn

Price: $49.99 Special Price: $39.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 11.1V 5000mah (3S) 30C LiPo Battery]]> http://www.hobbypeople.net/index.php/hobby-people-11-1v-5000mah-3s-30c-lipo-battery.html

Hobby People 11.1V 5000mah (3S) 30C LiPo Battery

Airplane Pack with No Connector

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

  • Pack Dimensions: 126.2 x 43.3 x 29.5 mm (4.97 x 1.7 x 1.16 in)
  • Weight: 357.2 g (12.6 ounces)
  • Plug: None

Price: $59.99 Special Price: $49.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 11.1V 6500mah (3S) 30C LiPo Battery]]> http://www.hobbypeople.net/index.php/hobby-people-11-1v-6500mah-3s-30c-lipo-battery.html

Hobby People 11.1V 6500mah (3S) 30C LiPo Battery

Airplane Pack with No Connector

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

  • Pack Dimensions: 127.3 x 46.3 x 31.7 mm (5.01 x 1.82 x 1.25 in)
  • Weight: 388.4 g (13.7 ounces)
  • Plug: None

Price: $79.99 Special Price: $69.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 14.8V 5000mah (4S) 30C LiPo Battery]]> http://www.hobbypeople.net/index.php/hobby-people-14-8v-5000mah-4s-30c-lipo-battery.html

Hobby People 14.8V 5000mah (4S) 30C LiPo Battery

Airplane Pack with No Connector

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

  • Pack Dimensions: 127.4 x 45.3 x 39.6 mm (5.02 x 1.79 x 1.55 in)
  • Weight: 470.6 g (16.6 ounces)
  • Plug: None

Price: $79.99 Special Price: $69.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 14.8V 6500mah (4S) 30C LiPo Battery]]> http://www.hobbypeople.net/index.php/hobby-people-14-8v-6500mah-4s-30c-lipo-battery.html

Hobby People 14.8V 6500mah (4S) 30C LiPo Battery

Airplane Pack with No Connector

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

  • Pack Dimensions: 129.5 x 44.1 x 44.2 mm (5.1 x 1.73 x 1.74 in)
  • Weight: 513.1 g (18.1 ounces)
  • Plug: None

Price: $99.99 Special Price: $84.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 18.5V 5000mah (5S) 30C LiPo Battery]]> http://www.hobbypeople.net/index.php/hobby-people-18-5v-5000mah-5s-30c-lipo-battery.html

Hobby People 18.5V 5000mah (5S) 30C LiPo Battery

Airplane Pack with No Connector

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

  • Pack Dimensions: 128.3 x 45 x 49.7 mm (5.05 x 1.77 x 1.96 in)
  • Weight: 586.8 g (20.7 ounces)
  • Plug: None

Price: $99.99 Special Price: $79.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 18.5V 6500mah (5S) 30C LiPo Battery]]> http://www.hobbypeople.net/index.php/hobby-people-18-5v-6500mah-5s-30c-lipo-battery.html

Hobby People 18.5V 6500mah (5S) 30C LiPo Battery

Airplane Pack with No Connector

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

  • Pack Dimensions: 130.9 x 49.2 x 54 mm (5.15 x 1.94 x 2.13 in)
  • Weight: 660.5 g (23.3 ounces)
  • Plug: None

Price: $119.99 Special Price: $99.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 7.4V 4000mAh 25C Hard Case LiPo Battery - T-Conn]]> http://www.hobbypeople.net/index.php/hobby-people-7-4v-4000mah-25c-hard-case-lipo-battery-t-conn.html

Hobby People 7.4V 4000mAh 25C Hard Case LiPo Battery

W/ T-Connector

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 25C, this is the LiPo battery you have been waiting for.

Specifications:

• Pack Dimensions: 23.5 x 46.5 x 138 mm

• Weight: 190g

• Plug: T-Connector

Price: $29.99 Special Price: $24.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 7.4V 4000mAh 2S 60C Shortie Hardcase Li-Po Car Pack ROAR]]> http://www.hobbypeople.net/index.php/hobby-people-7-4v-4000mah-2s-60c-shortie-hardcase-li-po-car-pack.html

Hobby People 7.4V 4000mAh 2S 60C Shortie

Hardcase Li-Po Car Pack

New technology for 1/10th scale cars and trucks. The high C-rating means more punch off the line, but the thing that makes this pack unique is its small size and light weight. Perfect for lighter 1/10th scale race buggies and trucks. It's shorter so you can even move the Li-Po inside the battery compartment to adjust weight balance.

Features:

• High Discharge Rates

• Up To 3C Charge Rates

• Performance Lithium Polymer Cells

• Standard Balance Tap Plug

• Quality Assembly With Proper Size And Type Lead Wire

• Honest Quality At A Great Price

Specifications:

• Dimensions: 3.67 x 1.82 x 0.98in (93.4 x 46.3 x 24.8mm)

• Weight: 7.2oz (204g)

• Female T-Connector with High-Quality Silicon Wires

• Standard Balance Plug

Price: $64.99 Special Price: $63.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People 7.4V 5000mAh 35C Car Battery LiPo Hard Case 4mm]]> http://www.hobbypeople.net/index.php/hobby-people-7-4v-5000mah-35c-car-lipo.html

Hobby People 2S 7.4V 5000mAh 35C

Hard Case LiPo Battery with T-Connector and Standard Balance Plug

This is a Hobby People 2S 7.4V 5000mAh 35C Hard Case LiPo Battery with T-Connector and Standard Balance Plug. This 35C LiPo car pack from Hobby People features 4mm gold-plated power inputs, a hard case suitable for racing, performance Lithium Polymer cells and a wire harness with T-connector and standard balance lead.

A race pack at a reasonable price! While other companies are offering the products you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best products. This is why Hobby People offers a brand of batteries at economy prices with higher-than-economy performance.

Features:

• High Discharge Rates

• Up To 3C Charge Rates

• Performance Lithium Polymer Cells

• Standard Balance Tap Plug

• Quality Assembly With Proper Size And Type Lead Wire

• Honest Quality At A Great Price

Specifications:

• Length: 5.44in (138mm)

• Width: 1.83in (46.6mm)

• Height: 0.92in (23.4mm)

Price: $49.99 Special Price: $39.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People Century EP RTF Park Flyer with 2.4G Radio & Battery]]> http://www.hobbypeople.net/index.php/hp-mdl-century-ep-rtf-park-flyer-with-2-4g-radio-battery.html

Hobby People Century EP

Ready-to-Fly Park Flyer w/2.4GHz Radio & LiPo Battery

This is a Hobby People Century EP Ready-to-Fly Park Flyer w/2.4GHz Radio & LiPo Battery. The Century is the perfect plane for small flying areas and all new pilots! So easy you'll be flying in a snap! The Century's unique quick assembly takes just a few minutes. The wing is retained with a magnet, the tail clips-on. Everything else is assembled and ready, right out of the box so you can get flying in minutes! And flying is what you'll be doing with this Century, over and over again. It's glide is smooth and stable. The power is perfect for good climb-outs with the reserve power needed to get out of trouble. Even the charger is built into the transmitter so you can recharge right at the field.

Many people may be flying the Century for the first time. To help the new pilot be successful we've included a detailed manual that includes both assembly, use, and flight tips geared to make you successful faster! Additionally, we know that every landing might not be so perfect. That's OK, the Century is easily to repair and supported with a full-line of replacement parts to get you back in the air quick! The Century's appeal doesn't end there. Experienced modelers looking for a relaxing, easy Park Flyer will appreciate the quality and engineering that went into this model. It's refined designed make it reliable and fun. It's a spectacular little grab and go, lunch-break flyer! So small you might even keep it on your desk, ready to fly! The Century is the perfect easy-flying Park Flyer anyone can enjoy!

Features:

• Easy-to-Fly - The Century EP is Perfect for New Pilots

• Great Size for Small Parks/Flying Areas

• Quick and Easy Assembly - No Glue or Tools Required

• Snap-On Tail for Easy Assembly and Replacement

• Magnet-Attach Wing for Easy Assembly and Transport

• Includes 2.4GHz FHSS Radio with Built-In LiPo Charger

• Indirect Gear-Drive Motor with Folding Propeller

• 1S 150mAh LiPo Battery for Efficiency and Long Flight Times

Specifications:

• Wingspan: 24.75 Inches (629mm)

• Wing Area: 66.5 Square Inches (4.29sq.dm)

• Length: 19 Inches (483mm)

• Weight RTF: 1.75 Ounces (50g)

• Wing Loading: 3.8 Ounces/Square Foot (11.56g/sq.dm)

Items Required, But Not Included:

• 4 'AA' Alkaline Batteries for Transmitter

Price: $99.99 Special Price: $79.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People P-51D Mustang 1.2M w/Retracts RTF (2.4G/BL)]]> http://www.hobbypeople.net/index.php/hobby-people-p-51d-mustang-1-2m-w-retracts-rtf-2-4g-bl.html

Hobby People P-51D Mustang EP

Ready-to-Fly Brushless EPO Foam Aircraft w/Retracts & 2.4GHz Radio

This is a Hobby People P-51D Mustang EP Ready-to-Fly Brushless EPO Foam Aircraft w/Retracts & 2.4G Radio. This spectacular Hobby People model of the famous P-51D Mustang rings with scale accuracy. The design truly captures the P-51D's famous outline, enough to impress even scale modelers. With retracts and retract doors, in flight it gives that gear-up look that makes low passes truly impressive. Look closely at the Hobby People P-51D and you'll see scale panel lines and even markings for the formation lights. It's topped off with enough brushless power to swing a big scale spinner and 4-blade prop. This Ready-to-Fly version includes a 6-channel 2.4G radio. In no time you'll be flying a top-notch Mustang with the right looks and flying performance to impress even the most experienced R/C pilots.

Features:

• EPO Molded Foam Construction

• Scale Details and Painted Scale Color Scheme with Decals Applied

• One-Piece Wing with Electric Main Gear Retracts and Dual Aileron Servos for Precise Control

• Detailed Canopy with Pilot and Cockpit is Held in Place with Magnetic Latches to Allow Easy Battery Access

• Steerable Mechanical Retractable Tail Wheel with Landing Gear Doors

• Custom 4-Bladed Propeller with Custom Spinner

• 35-48 Size 760KV Brushless Motor and 11.1V 50 Amp Brushless ESC

• 11.1V 2200mAh 20C LiPo Battery and DC Balance Charger

• Servos and Control Linkages are Installed and Ready for Final Setup Adjustments

• 6-Channel 2.4G FHSS-1 Transmitter and Receiver

Specifications:

• Wingspan 49.0 in (1245mm)

• Length 40.5 in (1029mm)

• Wing Area 410 sq in (26.45sq.dm)

• Weight (Approx) 3.0 Lbs (1361g)

• Wing Loading 16.9 oz/sq ft (51.44g/sq.dm)

What's Included:

• P-51D Mustang EP RTF with Brushless Motor, Brushless ESC, Servos and Retracts

• 6-Channel 2.4G Transmitter and Receiver

• 3S 11.1V 2200mAh 20C LiPo Battery

• DC LiPo Balance Charger

• Custom Spinner and 4-Blade Propeller

• Radiator Scoop and Accessories Bag

Items Required, But Not Included:

• 4 'AA' Batteries for Transmitter

• Basic Modeling Tools and Supplies

Price: $249.99 Special Price: $199.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People P-51D Mustang 1.2M w/Retracts Rx-Ready]]> http://www.hobbypeople.net/index.php/hobby-people-p-51d-mustang-1-2m-w-retracts-rx-ready.html

Hobby People P-51D Mustang EP

Receiver-Ready Brushless EPO Foam Aircraft w/Retracts

This is a Hobby People P-51D Mustang EP Receiver-Ready Brushless EPO Foam Aircraft w/Retracts. This spectacular Hobby People model of the famous P-51D Mustang rings with scale accuracy. The design truly captures the P-51D's famous outline, enough to impress even scale modelers. With retracts and retract doors, in flight it gives that gear-up look that makes low passes truly impressive. Look closely at the Hobby People P-51D and you'll see scale panel lines and even markings for the formation lights. It's topped off with enough brushless power to swing a big scale spinner and 4-blade prop. This Receiver-Ready version only requires that you add your favorite 5-channel or more transmitter, receiver, and 2200 mAH battery. In no time you'll be flying a top-notch Mustang with the right looks and flying performance to impress even the most experienced R/C pilots.

Features:

• EPO Molded Foam Construction

• Scale Details and Painted Scale Color Scheme with Decals Applied

• One-Piece Wing with Electric Main Gear Retracts and Dual Aileron Servos for Precise Control

• Detailed Canopy with Pilot and Cockpit is Held in Place with Magnetic Latches to Allow Easy Battery Access

• Steerable Mechanical Retractable Tail Wheel with Landing Gear Doors

• Custom 4-Bladed Propeller with Custom Spinner

• 35 -48 Size 760KV Brushless Motor and 11.1V 50 Amp Brushless ESC

• Servos and Control Linkages are Installed and Ready for Final Setup Adjustments

Specifications:

• Wingspan 49.0 in (1245mm)

• Length 40.5 in (1029mm)

• Wing Area 410 sq in (26.45sq.dm)

• Weight (Approx) 3.0 Lbs (1361g)

• Wing Loading 16.9 oz/sq ft (51.44g/sq.dm)

What's Included:

• P-51D Mustang EP RTF with Brushless Motor, Brushless ESC, Servos and Retracts

• Custom Spinner and 4-Blade Propeller

• Radiator Scoop and Accessories Bag

Items Required, But Not Included:

• 5-Channel or More 2.4G Transmitter and Receiver*

• 11.1v 2200 mAh LiPo and compatible charger.

• Basic Modeling Tools and Supplies

*Requires 6-channel or more transmitter and receiver if you install the optional flaps. Optional Flap Conversion Kit available separately.

Price: $189.99 Special Price: $129.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People Servo Driver - 3-Mode, 3-Servo Checker]]> http://www.hobbypeople.net/index.php/hobby-people-servo-driver-3sx-3mode-ccpm-checker.html

HP Dual Servo-CCPM Servo Driver

This is a Hobby People Dual Servo CCPM Servo Driver. The HP Servo Driver allows you to test, cycle and check the neutral point of up to three analog or digital servos at one time. This makes it a great tool for matching servos for dual servo or CCPM applications. This enables you to choose servos that operate at the same speed and have the same neutral point, ensuring absolute compatibility and precision between servos. The HP Servo Driver can be powered by a 4.0 to 6.0 volt Ni-Cd or Ni-MH battery pack, or a 6.6 volt Li-Fe battery pack. It can even powered through an ESC or UBEC. It’s small, lightweight and best of all, it’s easy to use.

Features:

• Three Operating Modes: Manual Mode, Neutral Mode and Automatic Wiper Mode

• Great Tool to Help Match Servos for Dual Servo or CCPM Applications

• Use to Test Control Linkage Setups

• Test, Cycle and Check the Neutral Point of Up to Three Analog or Digital Servos at the Same Time

• Test Brushed and Brushless ESC Throttle Functionality in Manual Mode

• Can Be Powered By a Variety of Sources:

• 4.0 to 6.0 Volt Ni-Cd or Ni-MH Battery Pack

• 6.6 Volt Li-Fe Battery Pack

• Through an ESC or UBEC

• Small, Lightweight and Easy to Use - It’s a Must-Have Tool for the Serious Modeler

Specifications:

• Nominal Input Voltage: 4.0 to 6.0 Volts DC

• Output Signal: 1.5ms +/- 0.5ms

• Dimensions: 1.81 x 1.25 x 0.66 Inches (46.0 x 32.0 x 17.0mm)

• Weight: 0.28 Ounces (8g)

Price: $9.99 Special Price: $6.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People Super Cub Micro - Front Yard Flyer RTF 2.4GHz]]> http://www.hobbypeople.net/index.php/hobby-people-super-cub-micro-front-yard-flyer-rtr-2-4ghz.html

Hobby People Micro Super Cub

Ready-to-Fly Front Yard Flyer w/2.4GHz Radio

Now You Can Truly Fly in Your Front Yard!

This is a Hobby People Micro Super Cub Ready-to-Fly Front Yard Flyer w/2.4GHz Radio. Fly anywhere there’s low to no-wind conditions. This 2.4GHz-controlled Micro-sized Super Cub gets you flying anywhere, anytime. The Super Cub is factory-built and ready to fly. Just install 4 ‘AA’ batteries, charge the LiPo flight battery and you’re ready to fly! The rudder and elevator are controlled by proportional magnetic actuators, and the micro-geared motor system provides plenty of power for a great flying Cub you’ll want to fly again and again.

Features:

• Great Flight Characteristics in a Small Package

• Quality Construction and Components

• Micro Gear-Drive Power System with 3.2 x 2.8 Propeller

• Proportional Magnetic Actuators Control the Elevator and Rudder

• 2.4GHz 3-Channel Transmitter w/Built-In LiPo Battery Charger & Adjustable Trims

• Completely Factory-Built and Ready-to-Fly - Just Add Transmitter Batteries

Specifications:

• Wingspan: 13.7 Inches (348mm)

• Wing Area: 29.1 Square Inches (1.88sq.dm.)

• Length: 9.3 Inches (236mm)

• Weight: 0.42 Ounces (12g)

What's Included:

• Assembled Micro Super Cub

• 3-Channel 2.4GHz Transmitter

• 1S 3.7V 35mAh LiPo Battery

• Replacement Propeller

• User's Guide

Items Required, But Not Included:

• 4 'AA' Alkaline Batteries for Transmitter

Price: $69.99 Special Price: $59.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People Superfly X Receiver Ready - Bl Motor/Lipo/Ailerons No Tx]]> http://www.hobbypeople.net/index.php/hobby-people-superfly-x-receiver-ready-bl-motor-lipo-ailerons-no-tx.html

Hobby People Superfly X

4-Channel Receiver-Ready Brushless Aileron Trainer

This is a Hobby People Superfly X 4-Channel Receiver-Ready Brushless Aileron Trainer. The Superfly X is the easy way to get flying. Enjoy the performance only brushless power can provide, with the precision of added ailerons. This Receiver-Ready version includes everything except the transmitter and receiver.

The Superfly X is a durable EPO-foam airplane that's easily transported due to its 2-piece wing. Even the canopy is easy-access with factory-installed magnets. The model flies smoothly due to its generous tail surface area and modern wing shape. You'll have a Sunday-flyer just about any pilot would enjoy. The Superfly X is the easy way to get a go-anywhere, have-fun park flyer light enough and small enough for the AMA Park-Pilot program, all for an easy price. Get the Superfly X from Hobby People Model.

Features:

•  Prebuilt and Ready to Install Your Own Receiver

• High-Performance 4-Channel Elevator, Aileron, Rudder and Throttle Control

•  Includes 2630 Size 1050kV Brushless Motor

• Includes 4-Blade Propeller

• Includes 11.1 Volt 20 Amp Brushless ESC

• Includes Four Installed Micro Servos

• Includes 3S 1500mAh Li-Po Battery and DC Balance Charger

Specifications:

• Wing Span: 54.5in (1384mm)

• Wing Area: 350sq.in (22.58sq.dm)

• Length: 35.5in (902mm)

• Flying Weight: 26oz  (737g)

• Wing Loading: 10.7oz/sq.ft (32.64g/sq.dm)

• Brushless Motor:

• 2630 size

• 11.1V rated

• 1050KV

• Max Continuous current: 15A

• Weight: 58g

• Brushless ESC:

• Input Voltage 11.1 Volts

• Continuous Current: 20 Amps

Items Required, But Not Included:

• 4-Channel or More Transmitter and Receiver (AeroSport 5-Channel 2.4GHz FHSS-1 or Similar)

• 1 oz. Bottle of Foam-Safe Thick C/A

• 1.5mm Hex Wrench, # 1 Philips Head Screwdriver, Scissors, Ruler and Double-Sided Foam Tape

Price: $169.99 Special Price: $149.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People Superfly X RTF Trainer- Brushed, 3-Ch 2.4Ghz Radio]]> http://www.hobbypeople.net/index.php/hobby-people-superfly-x-rtf-sport-brushed-3-ch-2-4ghz-radio.html

Hobby People Superfly X

Ready to Fly Sport Plane with 3-Ch 2.4GHz Radio

The Superfly X from Hobby People is the easy way to get flying. Our entry-level RTF is affordable, fun, simple, and  a great flyer. It's a perfect place to start for new pilots. This plane is completely ready-to-fly, and features a brushed motor and 2.4GHz radio for elevator, rudder and motor control. This means that all you need to do is charge the included NiMH battery and you're in the air.

Also available are the high-performance Receiver-Ready and Kit versions. These versions feature a brushless motor and ailerons. Enjoy the performance only brushless power can provide, with the precision of added ailerons.

The Receiver-Ready version includes everything except the transmitter and receiver.

For the do-it-yourself modeler, get the affordable kit! The custom brushless motor and unique 4-blade propeller are included. The rest of the equipment and the finish is up to you.

No matter which version you choose, you'll have a durable EPO airplane that's easily transported due to its 2-piece wing. Even the canopy has easy access with factory-installed magnets. The model flies smoothly due to its generous tail surface area and modern wing shape. You'll have a Sunday-flyer just about any pilot would enjoy. The Superfly X is easy way to get a go-anywhere, have-fun park flyer light enough and small enough for the AMA Park-Pilot program, all for an easy price. Get the Superfly X from Hobby People Model.

Specifications

• Wing Span: 54.5in – 1384mm

• Wing Area: 350 sq. in. 22.58 sq. dm.

• Length: 35.5in – 902mm

• Flying Weight: 26oz – 737g

• Wing Loading: 10.7 oz/sq.ft. – 32.64 g/sq.dm.

• Brushed Motor: 480 size, 6.0V rated

• Brushed ESC: 8.4V (nimh/nicd 7-cell) 10amp

Price: $179.99 Special Price: $149.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People Waco Biplane EP Rx-R BL (No Tx/Rx/Bat/Chgr)]]> http://www.hobbypeople.net/index.php/hp-mdl-waco-biplane-ep-rx-r-bl-no-tx-rx-bat-chgr.html

HP-MDL Waco Biplane EP Rx-R BL

Waco Biplane - Golden Age Beauty.

Everyone loves a biplane! And, this biplane is absolutely stunning! The Hobby People Waco Biplane makes a perfect small-field flyer. The generous wing area and light wing loading give it spectacular low speed handling. You'll find this Waco unusually forgiving. Up front, the brushless power system gives this bipe just the right amount of power for great scale flight maneuvers with power to spare. Look just like the real-thing as you pull through big loops and rolls just like barnstormers of yesteryear. And you can fly with unusual precision as this Waco has solid linkage and a separate servos for the right and left wing halves, NO torque rods to bend or flex.

Of course, this is a factory- finished EPO foam model with the motor, esc, and servos installed. So, whether you get the Rx-R or RTF version, you can be flying this beautifully finished model in less time that it takes to charge the battery.

Fly with style, Fly the Hobby People Waco Bipe.

Waco Biplane EP Specifications

• Top Wing Span: 39in - 991mm

• Bottom Wing Span: 35.5in - 902mm

• Total Wing Area: 454.4sq.in. - 29.32sq.dm.

• Length Overall: 31in - 787mm

• Weight RTF: 32oz – 907g

• Wing Loading: 10.1oz/sq.ft. - 30.9g/sq.dm.

• Functions: Aileron, Elevator, Rudder, Throttle

• Power System: Brushless Motor and ESC with 3S Li-Po Battery

Waco Biplane EP Features

• Molded EPO Foam, Factory Finished

• Scale Outline and Detailed

• Dedicated Battery Hatch

• Durable Dual-Wire Landing Gear with Gear Cover and Wheel Pants

• Servos Factory Installed.

• 2-Blade Scale Spinner and Prop Hub

• Steerable Tail Wheel

Waco Biplane Electric Powered with Brushless Motor & Esc Included. Transmitter, Receiver, Battery, and Charger Not Included (Sold Separately).

Price: $159.99 Special Price: $99.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Hobby People Zero EP Rx-R w/Retracts BL (No Tx/Rx/Bat/Chgr)]]> http://www.hobbypeople.net/index.php/hp-mdl-zero-ep-rx-r-w-retracts-bl-no-tx-rx-bat-chgr.html

Hobby People Mitsubishi A6M Zero EP

Receiver-Ready w/Retracts

This is a Hobby People Mitsubishi A6M Zero EP Receiver-Ready Airplane w/Retracts. No Japanese WWII fighter is more well-known than the Mitsubishi A6M Zero (the official Allied reporting name was the “Zeke”). Active throughout WWII, it was considered the most-capable carrier-based fighter in the world. And, with its wide gear stance and low wing-loading, it was one of the easiest to fly. The Hobby People A6M Zero EP retains those great flight characteristics in a 1/12th-scale flying model that is fun and exciting to fly.

The airframe has panel lines, scale exhaust positions, guns and even a painted canopy. These details and paint scheme give the Hobby People A6M Zero EP scale good looks normally reserved for larger wood aircraft. It's ultra-quick to assemble too. Just glue on the tail, bolt on the wing and prop, install your own radio and battery, and you're ready to fly.

In the air, you'll get that great scale look that only comes when using retracts! The A6M Zero EP has simple mechanical retracts that are installed and adjusted at the factory. No mess, no fuss, just throw the switch and you'll have gear-up flight realism! The steerable tail wheel lets you taxi out and back just like the big boys. Top to bottom, tip to tip, the A6M Zero EP has the looks and performance you expect from a modern receiver-ready foam aircraft.

Features:

• Molded Foam Construction, Painted with Extensive Scale Details and Decals Applied

• One-Piece Wing with Dual Aileron Servos for Precise Control

• Mechanical Main Retracts with Gear Doors

• Steerable Tail Wheel

• Painted Canopy, Magnet Retained

• Easy-Access Battery Compartment

• Custom 11 x 10 3-Blade Propeller with Custom Spinner Finishes Off the Scale Look

• 3536 Size 800kV Brushless Motor and 50-Amp Brushless ESC

• Servos Installed with Control Linkages Ready for Final Setup Adjustments

• Great Flight Characteristics

• Scale Looks on the Ground and in the Air

Specifications:

• Wingspan: 39.75 Inches (1010mm)

• Length: 32.75 Inches (832mm)

• Wing Area: 265 Square Inches (17.10sq.dm)

• Weight RTF (Approximately): 32 Ounces (905g)

• Wing Loading: 17.4 Oz/SqFt (53.0g/sq.dm)

Items Required, But Not Included:

• 5-Channel or More Transmitter and Full-Range Micro Receiver

•11.1V 1500 to 2200mAh LiPo Battery

• LiPo Balance Charger

• Double-Sided Foam Tape

• Foam-Safe C/A Glue

• Basic Modeling Tools

Price: $159.99 Special Price: $139.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[HPHELI F450 Quad DIY Starter Kit (Receiver-Ready)]]> http://www.hobbypeople.net/index.php/hpheli-f450-quad-diy-starter-kit.html

Hobby People F450 Quad DIY Starter Kit

Rx-R Brushless Quad Copter

This is a Hobby People F450 Quad DIY Starter Kit. The F450 Quad DIY Starter Kit has the essentials you need to build your own quad copter. With its versatile frame, the F450 Quad can handle multiple setups and accessories. In addition, our advanced and very stable multi-rotor flight controller works with all major radio brands, including Airtronics, and with its four 2212 1000Kv brushless motors, the F450 Quad has the lifting power to carry lightweight action cameras, add-on lightweight FPV (First Person View) equipment or higher-capacity batteries. Build it your way, for your interests. Just add your own radio, receiver, 4-way power adapter and LiPo flight battery.

Features:

• Configure and Build to Your Needs

• Use Your Own 4+ Channe Computer Radio System

• Includes Advanced Super Multi-Rotor Flight Controller

• Includes 2212 1000Kv Brushless Motors, 2-3S 30 Amp Brushless ESCs and 10x4.5 Propellers

• Enough Lifting Power to Carry Lightweight Cameras, FPV Equipment or Higher-Capacity Batteries

• Strong, Lightweight Molded Outrigger Arms

• Strong, Lightweight Fiberglass Top and Bottom Plates

• Replacement Parts and Optional Accessories Available

Specifications:

• Diagonal Length: 17.7” (450mm)

• Weight: 9.9oz (282g)

• Take-Off Weight: 28.2 to 56.4oz (800 to 1600g)

• Motor: 2212 1000Kv Brushless (x4)

• ESC: 2-3S 30 Amp Brushless (x4)

• Propeller: 10x4.5 ’R’ (x2) / 10x4.5 ’L’ (x2)

What's Included:

• 1 x Hobby People F450 Frame Set

• 1 x Hobby People Super Multi-Rotor Flight Controller

• 4 x 2212 1000Kv Brushless Motors

• 4 x 2-3S 30A Brushless ESCs

• 4 x Motor/Battery Connector Sets with Heat-Shrink Tubing

• 4 x Propeller Adapters with Aluminum Spinner Nuts

• 2 x 10x4.5 ’R’ Propellers (CW Rotation)

• 2 x 10x4.5 ’L’ Propellers (CCW Rotation)

Items Required, But Not Included:

• 4-Channel or More 2.4GHz Aircraft Radio w/Full-Range Receiver

• 3S 1300-2200mAh 30C LiPo Battery

• Hobby People 4-Way Power Adapter for F450 Quad and Others

• Hobby People Power Adapter Mounting Posts for F450 Quad and Others

• Hobby People 200mm Cable Ties for F450 Quad and Others

• Battery Strap or Self-Adhesive Hook & Loop Material

• LiPo Balance Charger

• Liquid Thread Lock

Price: $179.99 Special Price: $149.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[HPHELI Quad RTF Multi-Rotor RC Heli w/Camera]]> http://www.hobbypeople.net/index.php/quad-rtf-multi-rotor-rc-heli-with-camera.html

Hobby People Quad RTF Multi-Rotor RC Heli w/Camera

A New Dimension to R/C Flying!

Record Digital Video and Still Pictures with This Version of the Quad

This is a Hobby People Quad RTF Multi-Rotor RC Heli w/Camera. No prior experience needed! Now anyone can get flying indoors or out with the big Quad from Hobby People. And now you can record everything! This Quad features an on-board camera that will take still images and digital movies all at the click of a button right on the controller! And when you're done flying, it's easy to download the images from the micro memory card to your PC or laptop with the included computer cable.

This Ready-to-Fly (RTF) package includes the radio, flight battery, and charger! Two completely pre-programmed flight modes give you the ability to set up the Quad for beginners and indoor flying or for advanced, reactive outdoor flying! Our refined Six-Axis Stabilization provides advanced electronic gyroscopic, computer controlled stability that makes the Quad easy and fun to fly! And, when you're ready, the Quad is aerobatic, too! Flip in any direction at your command! Even fly in the dark with the bright navigation lights!

Features:

• Four-Motor Control with LiPo Power

• Fly Indoors or Outdoors

• Refined Six-Axis Stabilization

• Easy and Fun to Fly

• 4-Channel 2.4GHz Transmitter

• Bright LEDs Allow You to Fly at Night

• 640x480 Camera with 1GB Memory Card

• Take Pictures and Video

• Aerobatic Flips on Command

• Great for Beginners and Experts Alike

• Includes Set of Replacement Rotor Blades

• Not Your "Typical" Quadcopter

Specifications:

• Frame Span: 11.25 Inches (286mm)

• Blade Diameter: 5.3 Inches (135mm)

• Flying Weight: Approximately 3.5 Ounces (99g)

• Flying Time: Approximately 7 Minutes

• Charge Time: Approximately 30 to 45 Minutes

What's Included:

• Quad Multi Rotor R/C Helicopter

• 4-Channel 2.4GHz Transmitter

• 1S 3.7V 500mAh 25C LiPo Battery

• AC LiPo Wall Charger

• Replacement Rotor Blades Set

• 1GB Memory Card & PC Adapter Cable

Items Required, But Not Included:

• 4 'AA' Alkaline Batteries for Transmitter

Price: $119.99 Special Price: $99.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[HPHELI X-2 RTF 350 Size Dual Rotor Outdoor Helicopter]]> http://www.hobbypeople.net/index.php/hpheli-x-2-rtf-350-size-dual-rotor-outdoor-helicopter.html

HP Heli's X-2

350-Size Outdoor RTF Co-Axial Helicopter

Co-Axial Helicopters revolutionized RC helicopters. Today the X-2 Revolutionizes Co-Axials.

This is the Hobby People Heli's X-2 350-Size Outdoor RTF Co-Axial Helicopter. Finally, a co-axial made for the real world - for beginners and experts alike. Fly outdoors. Fly in wind. Fly fast with authority.

The X-2 helicopter is perfect for learning to fly. It's the ONLY helicopter with multiple control settings from beginner 3-channel to high-performance 5-channel. You'll find it stable and very easy to hover, which is perfect for indoor flying. Plus, it's easy to see because it's larger than most co-axial helicopters. The X-2 is simply easy to fly.

However, we mean fly, not just hover. Because after you've got hovering down in 3-channel mode (or even 2-channel altitude-limit mode with the additional Flight Height Limit Device (sold separately), only the X-2's unique patented 5-channel mixed anti-wind tail rotor design can fly in windy conditions. What's more, it has proper control authority and the power to fly FAST for advanced pilots. The experienced helicopter pilots call it Fast-Forward-Flight. Experienced or not, you'll call it EXCITING. From learning to hover in 3- or 4-channel mode to flying fast outdoors in advanced 5-channel mode, the X-2 is the most-fun, most-exciting co-axial available today. You'll never look at co-axials the same way again. Join the X-2 Revolution.

Features:

• 100% Factory-Assembled

• Co-Axial Rotor System for Unmatched Stable Flight

• 5-Channel Anti-Wind Tail Control System (Patented)

• Advanced 2.4GHz Radio Control System

• Innovated Transmitter with Adjustable Channel Modes

• Match Helicopter Performance to Your Flying Skill Level

• 3S LiPo Battery with AC LiPo Balance Charger

• Automatic Yaw Gyro for Stable Flight

• Composite Plastic Main Frame with Metal Frame Plate

• Aluminum Tail Boom

• Option Upgrades and Repair Parts Available

• Detailed User's Guide

Specifications:

• Completion Level: Ready-to-Fly

• Experience Level: Beginner to Skilled

• Recommended Environment: Indoor or Outdoor

• Rotor Diameter: 18.75 Inches (476mm)

• Length: 20.25 Inches (515mm)

• Height: 9.8 Inches (250mm)

• Weight: 16.6 Ounces (470g)

• Main Motor: 180-Size Brushed x 2

• Tail Motor: N30-Size Brushed

• Flight Battery: 3S 11.1V 850mAh 22C LiPo

• Charger: 15VDC Input / 1.0A Output 2-3S LiPo Balance

• AC Adapter: 100 to 240VAC Input / 15V 1.0A Output

• Transmitter: 5-Channel 2.4GHz FHSS Digital Proportional

• Servos: 9 Gram Micro x 2

• Receiver: 5-n-1 2.4GHz FHSS Integrated

• Gyro: Externally Mounted Yaw Control

• Flight Range (Brushed): Up to 300 Ft

• Flight Range (Brushless): Up to 900 Ft

Items Required, But Not Included:

• 4 AA Batteries for the Transmitter

Optional Parts:

Several option upgrades are available for the X-2 to make your flying experience even more fun:

• 166206 Flight Height Limit Device - X-2 (Option) - This unique device is an on-board rpm governor that controls how high the X-2 can fly, regardless of throttle stick position. Perfect for beginners to prevent fly-aways, its also great for advanced pilots wanting to carry a camera or other expensive devices.

• 166207 Light Set - X-2 (Option) - Want to fly at night? Want a visual assist for orientation? This light set is made for the X-2 and plugs right into the 5-n-1 Rx board for ultimate convenience and compatibility.

• 166201 Brushless Conversion Set - X-2 Hopup (Option) - This brushless motor/ESC system has two motors and two ESC'sl custom-made for the X-2, to provide the utmost in power and efficiency. This gives the X-2 a 6-8 ounce payload capacity.

• 166208 Aileron Power-Assist Set - X-2 (Option) - Upgraded to Brushless motors? Need more aileron authority? This Power-Assist for aileron control gives the X-2 the same authority for aileron control as the tail motor does for pitch control. Never has a co-axial had so much control-authority and maneuverability in wind!

• 166212 Landing Gear For Video Camera - X-2 (Option) - Carry a Go-Pro or similar camera (not included) with ease. This add-on landing gear is fast and easy to install and allows the X-2 to carry a Go-Pro Video Camera! This landing gear is also great for those flying in tall grass. Note that carrying cameras or other payload adds  weight and stress to the motors. We recommend the brushless upgrade for carrying any cameras that weigh more than 2 ounces.

Setup Notes:

1. The X-2 is the latest generation of the Extreme Flyers X-350. This new generation has vastly more advanced electronics that make the TX and RX 5-n-1 incompatible with the X-350.

2. The X-2 uses a new battery plug. Plug set and Charging adapter is available. Item No 166325.

3. The new X-2 uses a metal-weighted flybar and the link is adjustable. This adjustable link is used to change the relationship between the flybar and the top blades. This creates a control for eliminating oscillation during hovering.

Price: $199.99 Special Price: $179.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[HUBSAN FPV Invader 4Ch Single Rotor Helicopter]]> http://www.hobbypeople.net/index.php/fpv-invader-4ch-single-rotor-helicopter.html

Hubsan Invader RTF

 2.4GHz FPV Single Rotor Helicopter

The Hubsan Invader RTF 2.4G FPV Single Rotor Helicopter is simply amazing. Not only is it a great flyer, it features a 5-megapixel camera that shoots live video directly to a 3.5" LCD monitor on the transmitter - in color! The Invader features rugged alloy construction, including a CNC-machined fixed-pitch rotor head. The flight controls can be programmed via the transmitter for beginner or expert flyers, making the Invader a good choice for all types of pilots. The Invader is a fixed-pitch heli and uses a 4-in-1 control unit that features a tail rotor gyro for stability, a flight control mixer, an ESC and the receiver.

Features:

• 4-Channel, Fixed-Pitch, Single Rotor

• Tail Rotor Gyro

• Selectable Flight Control Sensitivity for Beginner or Expert

• Durable Alloy Construction

• Includes 5-Megapixel Camera Installed Below Mainframe

• CNC-Machined Metal Rotor Head

• Direct-Drive Tail Rotor

• 2.4G Transmitter with 3.5" LCD Color Monitor

Specifications:

• Weight: 187g

• Main Rotor Diameter: 338mm

• Tail Rotor Diameter: 64mm

• Motor: 180 (Main) / N30 (Tail)

• Transmitter: 4-Channel 2.4GHz with 3.5" LCD Color Monitor

• Video Transfer Frequency: 5.8GHz

• Control Distance: 100 to 300 Meters

• Onboard Controller: 4-in-1 Control Unit Features Gyro, Mixer, ESC and Receiver

• Servos: 3.7g / 0.12sec/60º

• Camera: 5 Megapixels

• Live Video Distance: 50 to 100 Meters

Price: $269.99 Special Price: $229.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Kwik Bond Kwikbond CA Foam Safe Med #F 1 oz]]> http://www.hobbypeople.net/index.php/kwik-bond-kwikbond-ca-foam-safe-med-f-1-oz.html

Kwik Bond CA # F

Foam-Safe Medium - 1 Ounce

This is a 1 ounce bottle of Kwik Bond CA # F Foam-Safe Medium - 1 Ounce. # F forumula is foam-safe and is similar to Thick forumula, so it's good for filling small gaps. In addition to being same for foam, this formula is also odorless and non-fuming. Kwik Bond's exclusive, ultra convenient non-clog tapered applicator tip eliminates the need for pipette tubes and tip extensions. Our new stronger formula stays fresher longer.

Features and Specifications:

• 1 Ounce Bottle

• Medium Viscosity Formula is Similar to Thick Formula

• Foam-Safe Forumla Can Be Used to in Place of Epoxy on Foam Surfaces

• Odorless and Non-Fuming

• Non-Clog Tapered Applicator Tip

Warning: Eye irritant and bonds skin instantly. Keep out of reach of children, use in well ventilated area. Store in a cool, dry location, with the cap on.

Price: $12.99 Special Price: $7.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[LHS Electronics 7.4V 10000mAh 35C Car Battery LiPo - T-Conn]]> http://www.hobbypeople.net/index.php/lhs-electronics-7-4v-10000mah-35c-car-battery-lipo-t-conn.html

LHS Electronics 7.4V 10000mAh 35C LiPo

Car Battery with T-Connector

This is the LHS Electronics 7.4V 10,000mAh 35C LiPo Car Battery with T-Connector. It's not a typo! Turn to LHS for maximum run times! This 10,000mAh pack provides long run times over the typical 4000 to 5000mAh car pack. And because of its high capacity and c-rating, you can expect more power and more punch, too! Double your run time and go faster, all for less money. Only from LHS!

Specifications: 

• Pack Dimensions: 41 x 44 x 135 mm (1.6 x 1.7 x 5.3 in)

• Weight: 500 g (17.6 ounces)

• Plug: T-Conn

Price: $79.99 Special Price: $74.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Magnum Accy's Fuel Pump - Electric 12V DC]]> http://www.hobbypeople.net/index.php/magnum-fuel-pump-electric-12v-dc.html

Magnum Fuel Pump - Electric 12V DC

Magnum's 12V Fuel Pump!

Fill or drain your fuel tank using your power panel or any 12V battery. Mounts quickly to your fuel can, or to your field box. Includes clunk, nozzle, and alligator leads.

Price: $14.99 Special Price: $9.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Magnum Engines XL 52 RFS Blue R/C 4-Stroke Engine]]> http://www.hobbypeople.net/index.php/magnum-xl-52-rfs-blue-r-c-4-stroke-engine.html

Magnum XL .52RFS

R/C 4-Stroke Engine

This is a Magnum XL .52RFS R/C 4-Stroke Engine. The XL .52RFS is a single cylinder, four-stroke engine incorporating an aluminum piston, iron ring and steel sleeve for long life and high power output. A dual-needle valve carburetor for precise fuel/airflow metering is standard. The engine features a dual-ball bearing-supported crankshaft and camshaft, dual bushing-supported connecting rod, and a high-flow muffler for more power and reduced noise. Your Magnum XL RFS series engine was designed by expert engineers and built by master craftsmen using only the highest quality materials and CNC machinery. These qualities provide the long life and dependability you have come to expect from an engine of this caliber.

Magnum has been bringing you high performance engines at an affordable price for more than 20 years! During that time the line has grown and expanded to offer a full line of 4-stroke and 2-stroke engines. And, all are made from the finest materials on the latest machinery. Plus, you get the added security of a full one-year warranty that protects you from any manufacturing defects and or premature wear (crash damage not covered). For reliability, high quality, and performance the choice is MAGNUM!

Features:

• Ringed Piston Design for Long Life and High Power

• Aluminum Piston, Iron Ring and Steel Sleeve

• Rear-Updraft, Dual Needle Carburetor

• High-Flow Quiet Muffler

• Dual Ball Bearing-Supported Crankshaft and Camshaft

• Dual Bushing-Supported Connecting Rod

• Blue Rocker Valve Cover

• Safety Propeller Nut

Specifications:

• Displacement: 8.53cc

• Bore: 23mm

• Stroke: 21mm

• Practical RPM: 2,000 to 10,500

• Weight with Muffler: 15.7oz

• Muffler Thread Size: M10 x 0.75mm

• Crankshaft Thread Size: 1/4 - 28

• Recommend Propeller Size: 12 x 6 (Break-In)

*Requires glow plug, fuel, propeller and support equipment. We recommend using 15% ~ 20% Nitro Methane Fuel with 16% ~ 18% Castor Oil/Synthetic Oil Blend Lubricant. We recommend using a hot heat-range glow plug designed for 4-stroke engines, such as Thunderbolt HP, O.S. Type F or Fox Miracle Plug. Propeller size will vary based on many factors. We recommend a 12 x 6 propeller for break-in.

Price: $149.99 Special Price: $129.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Magnum Parts Muffler - XLS 40-52 Pitts Style]]> http://www.hobbypeople.net/index.php/magnum-muffler-xls-40-52-pitts-style.html Magnum Muffler - XLS 40-52 Pitts Style

This is a replacement pitts style muffler for your XLS 40-52 2-stroke engine from Magnum.

Price: $24.99 Special Price: $18.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[MOEBIUS MODELS Motm Kogar The Mighty]]> http://www.hobbypeople.net/index.php/moebius-motm-kogar-the-mighty.html

Moebius MOTM Kogar the Mighty

Plastic Snap-Together Model Kit

This is a Moebius Monsters of the Movies Kogar the Mighty Plastic Model Kit. This 1:12 scale model features highly detailed plastic parts molded in brown and snaps together - no glue is required! It includes optional heads and a movie clack board nameplate, in addition to a film history instruction sheet and waterslide decals. Add this Kogar the Mighty display model to your movie model collection now!

Features and Specifications:

• Scale: 1:12

• Skill Level: 3

• Highly Detailed Plastic Parts Molded in Brown

• Parts Snap Together - No Glue Required

• Optional Heads

• Movie Clack Board Nameplate

• Waterslide Decals

• Assembly Instructions

*This is an unpainted snap together plastic model kit that requires assembly. Paint, supplies and modeling tools required, and are available separately.

Price: $19.99 Special Price: $14.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Multiplex FunCub Kit]]> http://www.hobbypeople.net/index.php/multiplex-funcub-kit.html

Multiplex Fun Cub Kit

This is a Multiplex Fun Cub Kit. Whether at the beach or in your backyard, the FunCub is a playful, multi-faceted plane that you can take anywhere. Multiplex's optional, high-performance power pack system will effortlessly loft this plane from virtually any airstrip. And in the air, its unique combination of full 5-channel control with expansive flaps and oversized lightweight wheels ensures simple, shameless fun. Beginners will love its manageable, slow flying characteristics and experienced pilots will enjoy its ability to perform spectacular aerobatic maneuvers. Optional accessory floats turn this already versatile model into an attractive amphibian.

Specifications:

• Wingspan: 55 in.

• Wing Area: 589 sq. in.

• Wing Loading: 9.8 oz./sq. ft.

• Fuselage Length: 39 in.

• Control Functions: Aileron, Rudder, Throttle and Optional Landing Flaps

• Flight Characteristics: Docile Sport Flyer

• Target User: Beginner to Intermediate

Recommended Power Equipment (NOT) Included:

• Motor: 300 ~ 400 Watt Brushless Outrunner

• Speed Control: 30 ~ 40 Amp

• Propeller: 13 x 4

• Battery: 3S 2000mAh Li-Po

Recommended Radio Gear (NOT Included):

• Radio: 4 or More Channel

• Receiver: Micro Recommended

• Servos: 2 x HS-81's or 94091's and 2 to 4 x HS-55's or A9N's

Price: $119.99 Special Price: $99.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[NKOK 1/16 R/C Baja Desert Hog]]> http://www.hobbypeople.net/index.php/nkok-1-16-r-c-baja-desert-hog.html

NKOK 1/16 Mean Machines Baja Dune Racer

Full-Function R/C Stadium Truck

This is an NKOK 1/16 Mean Machines Baja Dune Racer Full-Function R/C Stadium Truck. This exciting 1/16 scale stadium truck includes a 2-channel pistol grip transmitter that controls the truck's forward, reverse, left, right and stop controls. Features a Lexan body and full working suspension. Everything is assembled and ready to drive. Just add batteries for hours of fun!

Features:

• Full-Function R/C Stadium Truck

• 2-Channel Pistol Grip Remote Control Included

• Lexan Body and Full Working Suspension

• Forward, Reverse, Right and Left, and Stop Controls

• For Ages 6 and Older

Items Required, But Not Included:

• 4 'AAA' Batteries for Buggy

• 2 'AA' Batteries for Transmitter

*Available in Blue (27MHz) or Red (49MHz). Not able to guarantee specific color unless purchased in person.

Price: $24.99 Special Price: $17.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Phase 3 EF-16 EDF Foam Kit - No Motor/Fan/ESC]]> http://www.hobbypeople.net/index.php/phase-3-ef-16-edf-foam-kit-no-motor-fan-esc.html

Phase 3 EF-16 EDF Foam Kit

Without Motor, Fan or ESC

Fly your next sortie with the EF-16 Model Jet from Phase 3 Models. This amazing EDF aircraft is fast, fun, and shockingly easy to fly. Its comparatively light wing loading, efficient wing and smooth lines make it fast on those full-throttle dive bombing runs, yet is still a pussycat at low throttle and glide settings. A modern model jet is not usually so easy to fly! We know you'll enjoy flying your next sortie and combating bogies at your local flying field with the Phase 3 Models EF-16 Jet.

Features:

• Molded Foam Airframe

• No Ailerons to Impede Smooth Airflow Over the Wing

• Exceptionally Stable Flyer, Especially for a Modern Jet Design

• Extensive Decal Sheet Included

• High-Quality Hardware

• Fast and Easy Assembly

Specifications:

• Wing Span: 26 Inches (660mm) 

• Wing Area: 195 Square Inches (12.58dm2) 

• Length: 36 Inches (914mm) 

• Weight RTF: 20 Ounces (570g) - Varies Depending on Equipment Used

• Wing Loading: 15 Ounces Per Square Foot (45g/dm2) 

• Functions: Stabilators with Elevon Mixing and Throttle

What's Included:

• Foam and Plastic Parts

• Canopy and Thrust Tube

• Control Hardware

• Decal Set

Items Required, But Not Included:

• 3-Channel or More Transmitter w/Elevon Mixin and Mini Full-Range Receiver

• 55mm EDF Fan Unit with Matching Brushless Motor

• 3S 2200mAh 30C LiPo Battery

• 9g Micro Servos (x2)

• 3S 30 Amp Brushless ESC

• 2.3mm Prop Adapter

Price: $49.99 Special Price: $29.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Phase 3 Vectored Thrust Unit - Squall w/Ball links (no rods)]]> http://www.hobbypeople.net/index.php/phase-3-vectored-thrust-unit-squall-w-ball-links-no-rods.html

109467 Vectored Thrust Unit - Squall w/Ball links (no rods) 3-axis vectored thrust unit for all Squall! models. Requires the special pushrod set for this unit 109468 (PH019-14).

Explore the possibilities of amazing 3D manuevers and jet hovering. For hovering, it is recommended to be used on the Squall 4-cell hi-performance version because of the better thrust- to-weight ratio.

This unit connects to the existing servos and requires no additional servos or radio programming. It is totally mechanically linked. You may need to change some of your control movements and rate responses to compensate for the increased control power.

Price: $29.99 Special Price: $19.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Pro-Line Flo-Tek Body - Short Course Clear]]> http://www.hobbypeople.net/index.php/pro-line-flo-tek-body-short-course-clear.html

Pro-Line Flo-Tek Body - Short Course Clear

for Slash, Slash 4x4, SC10, XXX-SCT, Ten-SCTE, Ultima SC & Blitz

This is a Flo-Tek Clear Body for Slash®, Slash® 4X4, SC10, XXX-SCT, Ten-SCTE, Ultima SC and Blitz. Introducing the first SC body specifically designed to minimize the short-course body parachute effect! If you have ever raced or bashed a short-course truck, you know that SC bodies act like parachutes when going over jumps, causing you to lose control and crash. Pro-Line’s Flo-Tek SC body features futuristic styling coupled with large vent holes that allow air to flow through – eliminating aerodynamic drag. The locations and size of the vents were designed to maximize air flow through the body while keeping the aggressive and high-tech look. Don’t get caught in the wind while the competition passes you by – Get Pro-Line’s Flo-Tek SC body today!

Features:

• Aerodynamic design prevents body parachute effect

• Bolt on modular number and side dam plates

• Exceptional detail and style

• Made with Crystal Clear Genuine GE Lexan®

• Four step to Race Ready:

1.) Clean Body and apply included window mask

2.) Paint then peel the over-spray film off

3.) Sticker your body (decal sheet included)

4.) Mount your new Flo-Tek onto your Slash®, Slash® 4x4, SC10, Ultima SC or Blitz

What’s Included:

• Flo-Tek Clear Body (1 pc)

• Number and side dam plates (2 pcs)

• Aluminum Hardware Pack

• Window templates

• Decal Sheet

Fits:

• Slash®

• Slash® 4X4

• SC10

• XXX-SCT

• Ten-SCTE

• Ultima SC

• Blitz

Price: $38.99 Special Price: $24.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/100 A-10 Thunderbolt Snap-Tite]]> http://www.hobbypeople.net/index.php/revell-1-100-a-10-thunderbolt-snap-tite.html

Revell 1:100 A-10 Thunderbolt

Snap-Tite Plastic Model

All through the Vietnam War, the U.S. Armed Forces lacked adequate close air support. Fairchild-Republic developed the A-10 Thunderbolt to remedy the situation. The A-10 can fly at altitudes under 1,000 feet (300 m) and 350 mph (560 km/h) speeds. The Thunderbolt's ability to fly "slow and low" makes it better suited for the ground-attack role, where small target detection often plays a part in a mission's success. Kit features easy, glue-free snap assembly, complemented by factory-decorated, painted plastic construction.

Features:

• Easy-to-Assemble Snap-Tite. No Glue Required!

• Factory-Decorated, Painted Plastic Construction

Overview

• Skill level: 1

• Scale: 1:100

• Length: 6-3/8"

• Wingspan: 6-7/8"

• Parts: 31

Price: $10.99 Special Price: $9.89

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/100 A-10 Thunderbolt SnapTite]]> http://www.hobbypeople.net/index.php/revell-1-100-a-10-thunderbolt-snaptite.html Revell 1/100 A-10 Thunderbolt SnapTite Designed especially for close air support, the Thunderbolt entered service in 1975. Literally built around the 30mm GAU-8 Gattling gun, the A-10 can also carry immense weapons loads under its wings and fuselage, including AGM 65 Maverick missiles. A highly survivable aircraft, the A-10 flew 8,100 sorties during Desert Storm and has recently seen action in Afghanistan and was a key battlefield weapons system during Operation Iraqi Freedom.
  • Skill Level 1
  • Length: 6-1/2"
  • Wingspan: 6-7/8"
  • Parts: 31
Features:
  • Easy snap construction
  • Pre-decorated plastic parts molded in color
  • Skill Level 1-paint and glue not needed.

Price: $9.99 Special Price: $8.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/100 F-14 Tomcat Snap-Tite]]> http://www.hobbypeople.net/index.php/revell-1-100-f-14-tomcat-snap-tite.html

Revell 1:100 F-14 Tomcat

Snap-Tite Plastic Model Kit

The F-14 Tomcat was retired by the U.S. Navy in September 2006, but it remains one of today's most famous fighter aircraft. That's because the F-14 has been prominently featured in a number of novels, television shows and films since its 1974 introduction. The aircraft most famously appeared in the 1986 blockbuster "Top Gun®," where it was flown by Tom Cruise's character, "Maverick." The film was an instant hit, which propelled the actor - and the aircraft - into superstardom. Kit features easy, glue-free snap assembly, complemented by factory-decorated, painted plastic construction.

Features:

• Easy-to-Assemble Snap-Tite. No Glue Required!

• Factory-Decorated, Painted Plastic Construction

Overview

• Skill level: 1

• Scale: 1:100

• Length: 7-1/16"

• Wingspan: 7-5/8"

• Parts: 22

Price: $10.99 Special Price: $9.89

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/100 F-15 Eagle SnapTite]]> http://www.hobbypeople.net/index.php/revell-1-100-f-15-eagle-snaptite.html

Revell 1/100 F-15 Eagle SnapTite In the deadly realm of air-to-air combat, Eagle pilots have the assurance that one of the most advanced high-tech aircraft in the skies is backing them up. Designed to fly on both long-range ground attack and air-superiority missions, simply put, it blows things up and shoots things down.

  • Skill Level 1
  • Length: 7-3/8"
  • Wingspan: 5-1/8"

This is a SnapTite model that does not require paint or glue. Skill Level 1.

Price: $9.99 Special Price: $8.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/100 F-16 Fighting Falcon SnapTite]]> http://www.hobbypeople.net/index.php/revell-1-100-f-16-fighting-falcon-snaptite.html Revell 1/100 F-16 Fighting Falcon SnapTite This light, multi-role fighter carries two fuel tanks and Sidewinder missiles and is capable of speeds of over 1,300 MPH.
  • Skill Level 1
  • Length: 5-3/4"
  • Wingspan: 4"
Features:
  • Easy snap construction
  • Pre-decorated plastic parts molded in color
  • Skill Level 1-paint and glue not needed.

Price: $9.99 Special Price: $8.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/100 F-22 Raptor Snaptite]]> http://www.hobbypeople.net/index.php/revell-1-100-f-22-raptor-snaptite.html

Revell 1:100 F-22 Raptor Snap-Tite

Plastic Model Kit

This is a Revell 1:100 F-22 Raptor Snap-Tite Plastic Model Kit. This Snap-Tite kit features snap together assembly, so no glue is required. Parts are precolored, so no painting is required. Includes illustrated instructions.

Features:

• Easy Snap Together Assembly

• No Painting or Gluing Required

• Detailed Parts

• Illustrated instructions

Specifications:

• Scale: 1:100

• Skill Level: 1

• Wingspan: 5-3/8 Inches (136.5mm)

• Length: 7-7/16 Inches (188.9mm)

• Height: 2-1/16 Inches (52.3mm)

• Parts: 12

Price: $11.95 Special Price: $10.76

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/100 F-4 Phantom]]> http://www.hobbypeople.net/index.php/revell-1-100-f-4-phantom.html

Revell 1:100 F-4 Phantom Snap-Tite

Plastic Model Kit

This is a Revell 1:100 F-4 Phantom Snap-Tite Plastic Model Kit. This Snap-Tite kit features snap together assembly, so no glue is required. Parts are precolored, so no painting is required. Includes illustrated instructions.

Features:

• Easy Snap Together Assembly

• No Painting or Gluing Required

• Detailed Parts

• Illustrated instructions

Specifications:

• Scale: 1:100

• Skill Level: 1

• Wingspan: 4-11/16 Inches (119.0mm)

• Length: 7-1/4 Inches (184.1mm)

• Height: 2-5/16 Inches (74.6mm)

• Parts: 25

Price: $11.95 Special Price: $10.76

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/100 F-4 Phantom Thunderbirds Snap-Tite]]> http://www.hobbypeople.net/index.php/revell-1-100-f-4-phantom-thunderbirds-snap-tite.html

Revell 1:100 Thunderbird F-4 Phantom

Snap-Tite Plastic Model Kit

The U.S.A.F. Thunderbirds converted their entire fleet to F-4 Phantom IIs in 1969. The Blue Angels also switched to the Phantom that year, marking the only time in history that both demonstration squadrons flew the same aircraft. For five exciting years, the Thunderbirds performed some of the most memorable shows in the squadron's 58-year history flying Phantom IIs. The 1973 oil crisis forced the team to switch to the more fuel-efficient T-38 Talon in 1974. Kit features easy, glue-free snap assembly, complemented by factory-decorated, painted plastic construction.

Features:

• Easy-to-Assemble Snap-Tite. No Glue Required!

• Factory-Decorated, Painted Plastic Construction

Specifications:

• Skill Level: 1

• Scale: 1:100

• Length: 7-1/4"

• Wingspan: 4-11/16"

• Parts: 25

Price: $10.99 Special Price: $9.89

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/100 F/A-18 Super Hornet Snap-Tite]]> http://www.hobbypeople.net/index.php/revell-1-100-f-a-18-super-hornet-snap-tite.html

Revell 1:100 F-18 Hornet "Blue Angles"

Snap-Tite Plastic Model Kit

The F/A-18 Hornet was chosen to be the U.S. Navy's Blue Angels' primary aircraft in 1986, which proved to be a significant year for both the squadron and the aircraft. 1986 marked the Blue Angels' 40th anniversary. In the same year, the aircraft was used for the first time in combat, during Operation Prairie Fire. This unique fighter remains in use with the Blue Angels today. Kit features easy, glue-free snap assembly, complemented by factory-decorated, painted plastic construction.

Features:

• Easy-to-Assemble Snap-Tite. No Glue Required!

• Factory-Decorated, Painted Plastic Construction

Overview

• Skill level: 1

• Scale: 1:100

• Length: 7-5/16"

• Wingspan: 5-5/8"

• Parts: 22

Price: $10.99 Special Price: $9.89

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/108 Harbor Tug Boat, PL]]> http://www.hobbypeople.net/index.php/revell-1-108-harbor-tug-boat-pl.html

Revell 1/108 Harbor Tug Boat, PL Build this model and add it to your Revell collection!

Price: $17.99 Special Price: $16.19

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/110 Thunder Squadron Snaptite SR-71A]]> http://www.hobbypeople.net/index.php/revell-1-110-thunder-squadron-snaptite-sr-71a.html Revell 1/110 Thunder Squadron Snaptite SR-71A Flying at speeds in excess of Mach 3 (almost 2,000 mph), the Blackbird was instrumental in gathering strategic reconnaissance information from altitudes too high for radar to detect.
  • Skill Level: 1
  • Scale: 1:110
  • Wingspan: 6-1/4"
  • Length: 11-3/4"
Features:
  • Easy snap-together construction
  • Parts molded in color
  • Special decal sheet with one set of authentic markings and a bonus set of custom graphics such as lightning bolts and shark jaws
  • Skill Level 1-paint and glue not needed.

Price: $15.99 Special Price: $14.39

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/12 '69 Foose Camaro Z-28]]> http://www.hobbypeople.net/index.php/revell-1-12-foose-69-camaro-z-28.html

Revell 1/12 '69 Foose Camaro Z-28

Plastic Model Kit

This is a Revell 1/12 '69 Foose Camaro Z-28 Plastic Model Kit. Chevrolet designed the Camaro to counteract the massive success that the Ford Mustang had experienced since its introduction. The Camaro was much more than a simple market-share grabber, however. It possessed both elegance and power in abundance and was popular with most segments of the population. This model is a Chip Foose modified version of the highly popular Z-28, a V-8 powered sportster that won the Trans-Am competition. Kit features 302 Ci engine, tuned suspension, separate spoilers, Cross-Ram manifold, dual carb intakes and optional custom or stock wheels and tires.

Features:

• Highly Detailed Plastic Parts Molded in White, Black and Clear with Chrome Parts

• Separate Front and Rear Spoilers

• Choice of Wheels and Tires - Stock or Foose Custom

• Cross-Ram Manifold and Dual Carb Intake System

• Vinyl Plug Wires and Heater Hose

• Waterslide Decals

Specifications:

• Skill Level: 3

• Scale: 1/12

• Length: 15-5/8 Inches

• Width: 5-7/8 Inches

• Height: 4-1/4 Inches

• Parts: 176

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $59.99 Special Price: $53.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/125 U99 U-Boat, PL]]> http://www.hobbypeople.net/index.php/revell-1-125-u99-u-boat-pl.html

Revell 1/125 U99 U-Boat, PL

The Type VII U-Boats, under the command of Admiral Doenitz, were the principle German weapons in the Battle of the Atlantic. In this battle, Germany hoped to cut off the convoy supply lines to Great Britain and force the British to sue for peace. The U-Boats caused great havoc to the Atlantic convoys during the early years of WWII but by the end of 1943 they were outnumbered and outgunned. The Type VIIB U-99 was commanded by Kapitan Kretschmer and sank 44 ships before being sunk herself by the British destroyer "Walker". Most of the crew were taken prisoner.

• Scale:1/125

• Length: 20-7/8"

• 41 parts

Kit Features:

• Molded in light grey plastic

• Full hull with detailed propellors and rudder

• Engraved deck detail

• Detailed conning tower, deck gun, & bow planes

• Simple display stand included

• Movable periscopes if desired

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/144 C-17A Globemaster III]]> http://www.hobbypeople.net/index.php/revell-1-144-c-17a-globemaster-iii.html

Revell 1:144 C-17A Globemaster III

Plastic Model Kit

This is a Revell 1:144 C-17A Globemaster III Plastic Model Kit. The Globemaster III is a truly gargantuan transport craft, capable of carrying a combat-ready Abrams, multiple Strykers or Humvees, or up to 102 fully-equipped paratroopers. It can carry those troopers up to nearly 6,500 miles (10,390 km). That's literally a quarter of the way around the earth - a flight that, at the C-17A's cruise speed, would take roughly 12-1/2 hours. It's a plane that is well-deserving of its own model and Revell delivers! This kit features a fully-detailed C-17A with decals.

Features:

• Detailed Plastic Parts with Panel Lines and Rivets

• Authentic Scale Details Throughout

• Detailed Landing Gear

• Detailed Boarding Ladder

• High Quality Decals

• Illustrated Assembly Guide

Specifications:

• Skill Level: 3

• Scale: 1:144

• Wingspan: 14.0 Inches (355.6mm)

• Length: 14.5 Inches (368.3mm)

• Height: 4.5 Inches (114.3mm)

• Parts: 145

*This is an unassembled plastic model kit that requires assembly and painting. Paint and modeling supplies required and are available separately.

Price: $33.99 Special Price: $30.59

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/144 Space Shuttle Discovery w/Booster Rockets]]> http://www.hobbypeople.net/index.php/revell-1-144-space-shuttle-discovery-w-booster-rockets.html

Revell 1/144 Space Shuttle Discovery

with Booster Rockets

Plastic Model Kit

This is a Revell 1/144 Space Shuttle Discovery with Booster Rockets Plastic Model Kit. The first space shuttle to be launched into space on 12th April 1981 was the "Columbia". From 1983 onwards, with the completion of more orbiters, NASA considerably intensified their scientific experiments and strategic military activities in collaboration with the US Air Force. Communication and research satellites were transported into space, on-the-spot repairs were carried out and the American space station was built up and provisioned. The "Challenger" was launched into space for the first time on 4th April 1983. The "Discovery" lifted off for the first time on 30th August 1984. Since 3rd October 1985 the fourth space shuttle, the "Atlantis", has been used for 26 missions. The "Endeavour" was launched for the first time on 7th May 1992. The orbiters can remain in space for up to 28 days. Due to two tragic accidents in which the whole crew lost their lives, the "Challenger was lost in 1986 and the "Columbia" in 2003. Flights resumed after a two-year interruption and extensive modifications to the orbiters and the main tank. When it landed at Edwards Air Force Base, California, on 9th August 2005, the 31st flight of the "Discovery" brought the 114th NASA space shuttle mission to a successful conclusion. When shuttle flights are resumed in the next few years the construction of the international space station ISS will continue. The European space lab "Columbus" will also take part.

Features:

• Highly Detailed Plastic Parts

• Opening Cargo Bay Doors with Detailed Payload Detail

• Moveable Launch Arm

• External Fuel Tank with Two Solid Propellant Booster Rockets

• Highly Detailed Engines

• Authentic NASA Waterslide Decals

• Markings for Discovery, Atlantis, Endeavour and Enterprise Shuttles

Specifications:

• Skill Level: 4

• Scale: 1/144

• Height: 17-1/4 Inches

• Parts: 97

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $36.99 Special Price: $33.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/144 USA/USSR Missile Set]]> http://www.hobbypeople.net/index.php/revell-1-0-ussr-missile-set.html

Revell 1/144 USA/USSR Missile Set

Have a nice day : )

At the height of the Cold War, both the United States and the USSR possessed over 30,000 nuclear weapons. Among these weapons were thousands of missiles capable of being fired to targets half way around the globe. No matter whether they are launched from silos, submarines or strategic bombers, the sum effect of these nuclear stockpiles is the total annihilation of all life in both countries. This kit features nine U.S. missiles and eleven Soviet missiles with a display base and accurate decals.

Overview

• Skill Level: 2

• Scale: 1/144

• Length: 12-3/4"

• Width: 5"

• Height: 9-1/4"

• Parts: 45

Price: $18.95 Special Price: $17.06

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/16 Hawaiian Charger Funny Car]]> http://www.hobbypeople.net/index.php/revell-1-16-hawaiian-charger-funny-car.html

Revell 1/16 Hawaiian Charger Funny Car

Plastic Model Kit

This is a Revell 1/16 Hawaiian Charger Funny Car Plastic Model Kit. This assembly kit features detailed plastic parts molded in white and clear. Includes chrome-plated parts and soft black tires. Lift-up body and tube frame chassis with detailed drag blown engine. Includes vinyl tubing for plug wires and fuel lines.

Features:

• Highly Detailed Plastic Parts Molded in White and Clear with Chrome Plated Parts

• Soft Black Tires

• Lift-Up Body and Tube Frame Chassis

• Detailed Drag Blown Engine

• Vinyl Tubing for Plug Wires and Fuel Lines

• Waterslide Decals

Specifications:

• Skill Level: 3

• Scale: 1/16

• Length:11-15/16 Inches (303.2mm)

• Width: 4-3/16 Inches (106.4mm)

• Height: 2-7/8 Inches (73.0mm)

• Parts: 154

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $47.99 Special Price: $43.19

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '37 Ford Coupe Street Rod]]> http://www.hobbypeople.net/index.php/revell-1-24-37-ford-coupe-street-rod-63601.html

Revell 1:24 '37 Ford Coupe Street Rod

Plastic Model Kit

This is a Revell 1:24 '37 Ford Coupe Street Rod Plastic Model Kit.

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $23.99 Special Price: $21.59

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '40 Ford Custom Pickup Truck]]> http://www.hobbypeople.net/index.php/revell-1-24-40-ford-custom-pickup-truck.html

Revell 1:24 1940 Custom Ford Pickup Truck

This is a Revell 1:24 scale 1940 Custom Ford Pickup Truck plastic model kit. This is a highly-detailed kit that features clear windows, transparent red tail lights, chrome plated parts, in addition to a detailed engine and interior. Also includes soft black vinyl tires and authentic wheels.

*This is an unpainted plastic model kit. Kit requires assembly and painting. Modeling tools, adhesives and paint required (available separately).

Features:

• Skill Level: 2

• Molded in White Styrene - Requires Painting

• Clear Molded Windows

• Transparent Red Tail Lights

• Detailed Engine and Interior with Opening Hood

• Soft Black Vinyl Tires and Authentic Wheels

• Waterslide Decals

• Detailed Assembly and Painting Instructions

*This is an unpainted plastic model kit. Kit requires assembly and painting. Modeling tools, adhesives and paint required (available separately).

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '53 Corvette Roadster]]> http://www.hobbypeople.net/index.php/revell-1-24-53-corvette-roadster.html

Revell 1/24 '53 Corvette Roadster

The distinctive convertible cruiser of the '50s and '60s

Own a replica of the Corvette that started it all-the '53 Roadster! These sleek convertibles were an instant hit with the veterans of World War II. They were powered by "Blue Flame" straight six engines, giving them more power than any contemporary car. All that muscle turned the light two-seater into a rocket of a car. This kit features a detailed engine with choice of '53 or '54 intake system and a convertible top you can assemble in the up or down position.

Overview

• Skill level: 2

• Scale: 1/24

• Length: 6-3/4"

• Width: 3"

• Height: 2"

• Parts: 92

Price: $21.99 Special Price: $19.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '55 Ford F-100 Street Rod]]> http://www.hobbypeople.net/index.php/revell-1-24-55-ford-f-100-street-rod.html

Revell 1/24 '55 Ford F-100 Street Rod The mid-'50 series of Ford pickups has attained classic status at least as far as street rodders are concerned! Little did the original designers and engineers know, as they were putting their pickup truck line together, that one day those little workhorses would be customized and painted in every creative way imaginable. Updated interior with contemporary styling and textures. Detailed 5.0 liter V-8 engine complete with fuel injection. Decals with colorful custom graphics. Molded in white and clear with chrome plated parts and soft black tires.

  • Skill level: 2
  • Scale: 1:24
  • Length: 7-15/16"
  • Parts: 96

Price: $16.99 Special Price: $15.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '56 Chevy Bel Air]]> http://www.hobbypeople.net/index.php/revell-1-24-56-chevy-bel-air.html Revell 1/24 '56 Chevy Bel Air The 1956 Chevrolet Bel Air sport coupe is recognized as a modern day classic and a collectible automobile. Many modifications were made to the Chevy V-8 engine and it has been transformed into one of the most popular high performance engines ever. The engine in this model is a factory installed Corvette V-8 with dual four barrel carburetors or optional supercharger. Bucket seats, roll bar and alloy wheels. Pro stock hood scoop optional stock or raised rear axle. Decals with colorful custom graphics. Molded in white and clear with chrome plated parts and soft black tires.
  • Skill level: 2
  • Scale: 1:24
  • Length: 8-1/2"
  • Parts: 99

Price: $16.99 Special Price: $15.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '57 Chevy Nomad]]> http://www.hobbypeople.net/index.php/revell-1-24-57-chevy-nomad.html Revell 1/24 '57 Chevy Nomad Station wagons are in and theres a whole new crop of fans just waiting to get their hands on a vintage wagon. This classic Chevrolet Nomad 2-door wagon has been updated with modern street machine goodies. Chevy V-8 engine with two optional set ups, fuel injection or dual carburetors. Detailed chassis with racing wheels and interior with roll bar and bucket seats. Decals with colorful custom graphics. Molded in white and clear with chrome plated parts and soft black tires.
  • Skill level: 2
  • Scale: 1:24
  • Length: 8-3/8"
  • Parts: 97

Price: $16.99 Special Price: $15.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '60s Beetle Type 1]]> http://www.hobbypeople.net/index.php/revell-1-24-60s-beetle-type-1.html

Revell 1:24 '60s Beetle Type 1

Plastic Model Kit

This is a Revell 1:24 '60s Beetle Type 1 Plastic Model Kit.

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $23.49 Special Price: $21.14

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '64 Pontiac GTO 2N1]]> http://www.hobbypeople.net/index.php/revell-1-24-64-pontiac-gto-2n1.html

Monogram 1/25 '64 Pontiac GTO 2 'n 1

Motor City's most muscular creation.

The brainchild of Chief Engineer John Z. DeLorean and promotional manager Jim Wagners, the 1964 Pontiac GTO was GM’s practical answer to the short coming of the early ‘60’s era Super Stock By using a less aggressive big block V8 in a lighter intermediate body, the automaker had achieved almost the same horsepower to weight ratio, and equivalent acceleration, while retaining smooth driving and decent fuel economy. One enthusiasts magazine clocked a TriPower GTO from 0 to 100mph, then back to a dead stop in an incredible 19.4 seconds. Only a Ferrari could match this kind of performance in 1964, which is why Pontiac adopted the Italian manufacturer’s moniker “Gran Turismo Omalgamato.” The GTO also featured a recalibrated suspension for improved cornering and high speed stability. This Monogram 2’ n1 kit offers options as well; an additional hood cut out for dual 4-barrerl carburetors and velocity stacks, raked suspension and Centerline wheels and radial tires for a modified street machine version. You monogram model presents a fin replica of one of the most popular American nameplates in history.

Conceived and constructed in total secrecy, the 1964 Pontiac GTO is considered the first true "muscle car" by many auto aficionados. The prototype was so confidential that none of the head honchos at GM® knew it even existed. At first, sales expectations were so low that production was limited to only 5,000 models. However, the GTO was such a success that Pontiac sold 32,450 units in the car's first year. Kit features optional engine and hood components, optional wheels, soft black tires, chrome-plated parts and colorful "street machine" decals.

Features and Specifications

• Skill level: 2

• Molded in white and clear with chrome plated parts

• Soft black tires

• Optional wheels, hood and engine components

• Colorful street machine decals

• Illustrated instructions

• Scale: 1/25

• Length: 8-7/16"

• Width: 3"

• Height: 2-1/4"

• Parts: 132

Price: $16.99 Special Price: $15.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '64-1/2 Mustang Convertible]]> http://www.hobbypeople.net/index.php/revell-1-24-64-1-2-mustang-convertible-60944.html

Revell 1/24 '64-1/2 Mustang Convertible

The very first pony car

When the first Mustang rolled into American dealerships it wasn't just a new car, it was the herald of a complete cultural wildfire. Everyone suddenly wanted a powerful sports car and, since Ford had kept the cost so low, nearly anyone could get one. Within three months 100,000 cars had been sold. After eighteen months over a million were pulling American drivers at reckless speeds. It was the biggest revolution in automotive technology since the model T. Kit features an opening hood with V-8 engine, plus authentic factory stock decals.

Overview

• Skill level: 2

• Scale: 1/24

• Length: 7-7/16"

• Width: 2-3/4"

• Height: 2-1/4"

• Parts: 89

Price: $19.99 Special Price: $17.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '70 Buick GSX]]> http://www.hobbypeople.net/index.php/revell-1-24-buick-gsx.html

Monogram 1/24 '70 Buick GSX Plastic Model Kit

A true-blue muscle-car classic.

While it is usually considered a luxury car brand, Buick has produced several exceptional muscle cars over the years. The 1970 Buick GSX was a true-blue muscle car in looks and performance. Drivers could choose from yellow or white bodies, each with its own distinctive stripe package. Kit features a detailed 455 cubic-inch V-8 engine with a cold-induction air cleaner and a hood-mounted tach, a fully detailed suspension with a dual-exhaust system, a separate rear spoiler, soft black tires, chrome-plated parts and decals with authentic stock and colorful GSX graphics.

Features and Specifications

• Skill level: 2

• Scale: 1/24

• Length: 8-3/8"

• Width: 3-3/8"

• Height: 2-3/16"

• Parts: 86

Price: $17.14 Special Price: $15.43

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '70 Dodge Challenger 2 N 1]]> http://www.hobbypeople.net/index.php/revell-1-24-70-dodge-challenger-2-n-1.html

Revell 1/24 '70 Dodge Challenger 2 N 1 Dodge's entry into the pony car wars was the Challenger, and it more than held its own in hot company with the outstanding 340 cid small block engine. In fact, the 1970 Dodge Challenger T/A ranks as one of the wildest and most desirable musclecars ever built.

  • Skill Level 2
  • Scale: 1:24
  • Length: 8-1/2"
  • Width: 3"
  • Height: 1-3/4"
  • Parts: 78

Features

  • Optional custom hood and high rise dual four barrel intake, rear spoiler, colorful custom graphics, and Centerline wheels.
  • Choice of two versions - factory stock or street machine with dual 4-barrel high-rise intake.
  • Highly detailed interior.
  • Molded in white and clear with chrome plated parts and black vinyl tires.
  • Requires paint and glue (not included).

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '70 Plymouth Road Runner]]> http://www.hobbypeople.net/index.php/revell-1-24-70-plymouth-road-runner.html

Monogram 1/24 '70 Plymouth Road Runner

As the muscle car craze hit its stride in the late 1960s, there was a need for a more inexpensive model. The Road Runner had all of the muscle, but none of the fancy extras. This was just what buyers were looking for. It was packed with a big 440 Six Barrel engine good for 390 horsepower and 490 lbs. of torque.The advertising campaign slogan for 1970 was Plymouth’s “Rapid Transit System”. The Road Runner fit right in with its whimsical graphics and eye catching colors. The mighty 440 Six Barrel engine punched out 390 horsepower and a whopping 490 lbs. of torque. It could cut the quarter mile in the mid 13 second range at over 102 mph. The no frills Road Runner was extremely popular with the younger car buyer.

Features and Specifications

• Skill level: 2

• Highly detailed plastic pieces molded in white and clear

• Chrome plated parts and soft black tires

• Six pack carbs wtih pop up hood scoop and economy style bench seat

• Steel wheels with "Dog Dish" hub caps

• Waterslide decals

• Illustrated instructions

• Scale: 1/24

• Length: 8-1/2"

• Width: 3-1/4"

• Weight: 2-5/16"

• Parts: 77

Price: $16.99 Special Price: $15.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '77 Chevy Van]]> http://www.hobbypeople.net/index.php/revell-1-24-77-chevy-van.html

Revell 1/24 '77 Chevrolet Van Plastic Model Kit

Construct a custom classic.

The American van started in the late 60s and has been popular ever since. It has been used for everything from handyman truck to “Hippie” van. It is powered by a small block V-8 engine on a basic truck chassis. How the inside is equipped depends on the user. This version is the full size van with the most area inside.The biggest change to the basic van was when they moved the engine forward. This was done in the early 1970s and it made it possible to do routine maintenance from the outside of the truck. Otherwise the van has remained unchanged. Later came the development of the “Mini Van”, but they are more of a family vehicle and not used commercially like the full size van.

The 1977 Chevy Van continued the traditional look of earlier third-generation models produced during the 1970s. Multiple engine options were offered by Chevy, including gas-powered V6s and diesel-powered V8s. Tough, truck-style hubs and brakes were complemented by a dual A-Arm independent front suspension. On the outside, the van consisted of a unibody-style frame with a short nose and hood. Kit features high-backed captain's seats, a replica CB radio, a replica cassette player, an outside-mounted spare tire housing, soft black tires, assorted chrome-plated parts and decals with custom graphics.

Features and Specifications

• Skill Level: 2

• Highly detailed plastic pieces molded in white and clear

• Chrome plated parts and soft black tires

• High backed captain's seats

• CB radio and tape player

• Outside mounted spare tire housing

• Waterslide decals with custom graphics

• Illustrated instructions

• Scale: 1/24

• Length: 7-5/16"

• Width: 4"

• Height: 3-1/4"

• Parts: 81

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '78 Corvette Indy 500 Pace Car]]> http://www.hobbypeople.net/index.php/revell-1-24-78-corvette-indy-500-pace-car.html

Revell 1:24 '78 Corvette Indy 500 Pace Car

Plastic Model Kit

This is a Revell 1:24 '78 Corvette Indy 500 Pace Car Plastic Model Kit.

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $21.99 Special Price: $19.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '80 Ford Bronco 2N1]]> http://www.hobbypeople.net/index.php/revell-1-24-80-ford-bronco-2n1.html

Whether at work or play, combing good looks and performance, the Bronco has secured its place in automotive history as a milestone truck. The Bronco is a highly civilized, multipurpose vehicle that is capable of some of the most demanding terrain. It evolved from a light weight vehicle during the mid sixties into a comfortable off-road machine. Opening hood with detailed V-8 engine and four wheel drive chassis with all terrain tires and spoked alloy wheels. Optional rear roof cover, fender flares, rear seat, roll bar with off road lights and roof rack with skis. Decals with stock and custom graphics. Molded in white and clear with chrome plated parts and soft black tires.

  • Skill Level: 2
  • Scale: 1/24
  • Length: 7-3/4"
  • Parts: 104

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '85 Camaro Z-28]]> http://www.hobbypeople.net/index.php/revell-1-24-85-camaro-z-28.html

Revell 1/24 '85 Camaro Z-28

So fast the cops had to buy some to keep up

By 1985 Camaro was in its third generation and had established itself as a top performer. Z28 models incorporated hood louvers that opened at full throttle to give the 5.0 liter V-8 engine more power. An optional 215 horsepower engine launched the 3,000 lb (1,361 kg). body from 0 to 60 mph (96.6 km/h) in seven seconds. This scale version is a dream with a detailed interior, engine, suspension and more. Kit features parts molded in white and clear resin with chrome sections, soft black tires and factory stock decals.

Overview

• Skill level: 2

• Scale: 1/24

• Length: 8-1/8"

• Width: 3-3/8"

• Height: 2-1/4"

• Parts: 48

Price: $19.99 Special Price: $17.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '87 Buick GNX]]> http://www.hobbypeople.net/index.php/revell-1-24-buick-gnx.html

Revell 1/24 '87 Buick GNX

Performance that makes you feel like royalty

When most people think of performance cars they think of the big sporty names like Camaro or Corvette. For much of the 1980s, however, the Buick GNX consistently beat the Corvette and Camaro in quarter-mile times. Their turbo-charged V-6s produced 245 horsepower and could vault the GNX through a quarter mile in 13 seconds. After '87 Buick got over their fast and loose phase and returned to making solid luxury coupes. Kit features a full suspension and longitudinal torque bar, plus full factory stock decals.

Overview

• Skill level: 2

• Scale: 1/24

• Length: 8-3/8"

• Width: 2-7/8"

• Height: 2-3/8"

• Parts: 103

Price: $19.99 Special Price: $17.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 '93 Mustang SVT Cobra]]> http://www.hobbypeople.net/index.php/revell-1-24-93-mustang-svt-cobra.html

Revell 1/24 '93 Mustang SVT Cobra

High-Performance 3 door hatchback.

Redefine performance with the 1/24 scale '93 Mustang SVT Cobra. The scale replica of the 240 horsepower 5.0 liter engine shows you the power that vaulted the Cobra from 0 to 60 in six seconds. An authentic chassis molded from clear resin includes chrome plated parts and soft tires for a realistic look and feel. A separate instrument pod and driving lights let you custom-fit the Cobra's details to your own desires. Model also includes authentic factory stock detailing decals to spruce up your model.

Overview

• Skill level: 2

• Scale: 1/24

• Length: 7-1/2"

• Width: 3-1/16"

• Height: 2-1/4"

• Parts: 81

Price: $19.99 Special Price: $17.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Audi R8]]> http://www.hobbypeople.net/index.php/revell-1-24-audi-r8.html

Revell 1/24 Audi R8 The Audi R8 2 door sport coupe has bodywork completely made of aluminum with a 420 hp mid-mounted engine. The Audi R8 was introduced in 2006 and is the first sports car to be brought to market as a road going production car with a mid-mounted engine.

  • Skill Level 2
  • Scale: 1/24
  • Length: 7-1/4"

Price: $24.99 Special Price: $22.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Bad Medicine]]> http://www.hobbypeople.net/index.php/revell-1-24-bad-medicine.html

Revell 1/24 Bad Medicine

The cure for the common car.

Bad Medicine is one of Tom Daniel's craziest concoctions, and Monogram has given it the 1/24 scale treatment it deserves! This time out, Daniel has transformed a lightning-fast dragster into a prescription delivery service that can set new land-speed records. One thing's for sure: your pharmacy doesn't have anything like it! Kit features a long, low dragster body, assorted eye-catching goodies, soft black tires, chrome-plated parts and decals with authentic Tom Daniel graphics.

Overview

• Skill Level: 2

• Scale: 1/24

• Length: 8-3/4"

• Width: 3-1/2"

• Height: 2-7/8"

• Parts: 60

Price: $21.99 Special Price: $19.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Black Widow Hot Rod]]> http://www.hobbypeople.net/index.php/revell-1-24-black-widow-hot-rod.html

Revell 1:24 Black Widow Hot Rod

Plastic Model Kit

This is a Revell 1:24 Black Widow Hot Rod Plastic Model Kit. This kit features high-quality plastic parts molded in black, white and clear with chrome plated parts and soft black tires. A detailed V-8 engine equipped with triple carburetors and ribbed chrome rocker covers is exposed for the best detail. This kit can be built with the top either on or off and with or without fenders. Includes decals with pin stripes, spider webs, flames and race numbers.

Specifications:

• Skill Level: 2

• Scale: 1:24

• Length: 5-7/8 Inches (149.2mm)

• Width: 2-3/4 Inches (69.8mm)

• Height: 2-1/2 Inches (63.5mm)

• Parts: 55

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Blue Bandito 29 Ford Street Rod]]> http://www.hobbypeople.net/index.php/revell-1-24-blue-bandito-29-ford-street-rod.html

Revell 1/24 Blue Bandito '29 Ford Street Rod

Plastic Model Kit

This is a Revell 1/24 Blue Bandito '29 Ford Street Rod Plastic Model Kit. This kit features detailed plastic parts molded in blue, white and clear. Includes chrome plated parts, soft black tires, detailed V-8 engine, complete package of skin diving gear and surf board, and separate top and pickup bed cover.

Features:

• Highly Detailed Plastic Parts Molded in Blue, White and Clear

• Includes Chrome Plated Parts and Soft Black Tires

• Detailed V-8 Engine 

• Includes Complete Package of Skin Diving Gear and Surf Board

• Separate Top and Pickup Bed Cover

• Waterslide Decals

Specifications:

• Skill Level: 2

• Scale: 1/25

• Length: 6-3/8 Inches

• Width: 2-9/16 Inches

• Height: 2-13/16 Inches

• Parts: 117

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Boot Hill Express]]> http://www.hobbypeople.net/index.php/revell-1-24-boot-hill-express.html

Revell 1/24 Boot Hill Express

If you've gotta go, you might as well get there fast

This seriously twisted kit is what you get when you combine a dragster with an exceptionally ornate hearse. The beautiful wood lines and ornamentation of a carriage merge with the sheer power of a fuel-injected engine to create the fastest death wagon out there. Without a doubt, this is one hearse that will make the dead stand up and take notice. Kit features a skeleton figure with tombstone, single piece frame with spring suspension and full engine with injection system.

Overview

• Skill Level: 2

• Scale: 1/24

• Length: 6-1/4"

• Width: 3-1/4"

• Height: 3-1/2"

• Parts: 93

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Cherry Bomb]]> http://www.hobbypeople.net/index.php/revell-1-24-cherry-bomb.html

Revell 1:24 Cherry Bomb

Plastic Model Kit

This is a Revell 1:24 Cherry Bomb Plastic Model Kit. This kit features highly detailed plastic parts. Features soft black tires, opening bubble top and detailed custom motorcycle and trailer.

Features:

• Highly Detailed Plastic Parts Molded in Red and Clear with Chrome Plated Parts

• Soft Black Tires

• Opening Bubble Top

• Detailed Motorcycle and Trailer

• "Turbine" Engine with Clear Hood

• Waterslide Decals

Specifications:

• Skill Level: 2

• Car Length: 11.25 Inches (285.7mm)

• Car Width: 3-5/16 Inches (84.1mm)

• Car Height: 2-1/8 Inches (53.9mm)

• Trailer Length: 6-11/16 Inches (169.8mm)

• Parts: 65

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $22.89 Special Price: $20.60

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Cop Out]]> http://www.hobbypeople.net/index.php/revell-1-24-cop-out.html

Revell 1:24 Cop Out

Plastic Model Kit

This is a Revell 1:24 Cop Out Plastic Model Kit.

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $21.99 Special Price: $19.79

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Datsun Off-Road Pickup]]> http://www.hobbypeople.net/index.php/revell-1-24-datsun-off-road-pickup.html

Revell 1:24 Datsun Off-Road Pickup Truck

Plastic Model Kit

This is a Revell 1:24 Datsun Off-Road Pickup Truck Plastic Model Kit. This kit features highly detailed plastic parts molded in white and clear with chrome plated parts. Features soft black tires, opening hood and 4-cylinder engine.

Features:

• Highly Detailed Plastic Parts Molded in White and Clear with Chrome Plated Parts

• Soft Black Tires

• Opening Hood with Detailed 4-Cylinder Engine

• Off-Road Bumper Guards

• Large Off-Road Tires

• Waterslide Decals

Specifications:

• Skill Level: 2

• Scale: 1:24

• Length: 7-3/8 Inches (187.3mm)

• Width: 3 Inches (76.2mm)

• Height: 3-1/8 Inches (79.3mm)

• Parts: 50

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Ferrari 599 GTO]]> http://www.hobbypeople.net/index.php/revell-1-24-ferrari-599-gto.html

Revell 1/24 Ferrari 599 GTO

L.A. to New York in 12 hours

The Ferrari 599 GTO tops out at 208 mph (335 km/h), that's over 300 feet (93 m) per second. Its 5999 cc V-12 engine provides more horsepower and more torque than the standard 599 and the GTO is lighter than the standard 599. Unfortunately for most of us, Ferrari is only making 599 of these cars and each sells for a price that would make an oil sheik blush. This 1/24 scale kit features a detailed V-12 GTO engine, six-speed transmission, open side and hood louvers and movable tires.

Overview

• Skill Level 3

• Scale: 1/24

• Length: 7-1/2"

• Width: 3-1/2"

• Height: 2-1/8"

• Parts: 129

Price: $24.99 Special Price: $22.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Ferrari Enzo]]> http://www.hobbypeople.net/index.php/revell-1-24-ferrari-enzo-59778.html

Revell 1/24 Ferrari Enzo

The fiercest, fastest Ferrari ever made.

The Enzo Ferrari was unveiled at 2002's Paris Motor Show to celebrate the company's first Formula One win of the decade. Its 6L Tipo F140B V-12 engine can go from 0 to 100 mph (160 km/h) in 6.6 seconds. Only 400 were ever produced, but many consider it to be one of the 2000s' best sports cars. Kit features snap-together assembly, painted and detailed plastic pieces, a screw-on chassis, a see-through rear window with realistic engine details, soft black tires, rolling wheels with metal axles, chrome-plated parts and peel-and-stick decals.

Features and Specifications

• Skill Level: 1

• Highly detailed plastic pieces molded in red, black and clear

• Easy snap-together assembly...no gluing or painting needed

• Chrome plated parts

• Soft black tires

• View engine details through large rear window

• Rolling wheels with metal axles

• Screw on chassis

• Peel-n-stick decals

• Illustrated assembly guide

• Scale: 1/24

• Length: 7-11/16"

• Width: 3-3/8"

• Height: 1-15/16"

• Parts: 45

Price: $15.99 Special Price: $14.39

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Ferrari Enzo]]> http://www.hobbypeople.net/index.php/revell-1-24-ferrari-enzo.html Revell 1/24 Ferrari Enzo Named for the man who founded the company, the Enzo is the next step in Ferrari's supercar evolution. This mid-engined screamer is the stuff legends are made of: a 6 liter V-12 engine producing 660 horsepower in a 3,000 lb car translates into 0 to 60 mph times of 3.7 seconds and a top speed of 218 mph. No wonder all 349 copies Ferrari built were spoken for in record time.
  • Skill Level 3
  • Length: 7-1/2"
  • Parts: 145+
Features
  • Body pieces are molded in white.
  • Clear pieces included for windows and light lenses.
  • Accurate aerodynamic Ferrari bodywork.
  • Detailed interior. Realistic V-12 engine.
  • Hinged rear deck.
  • Aluminum-finish Ferrari 5-spoke wheels.
  • Treaded black vinyl Bridgestone Potenza tires.
  • Positionable front wheels.
  • Separate frame and floor pan.
  • Includes flexible detail screening for body vents.
  • Clear pictorial instructions.
  • Requires paint and glue (not included).
  • Previous modeling experience recommended.

Price: $23.99 Special Price: $21.59

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Garbage Truck]]> http://www.hobbypeople.net/index.php/revell-1-24-garbage-truck.html

Revell 1/24 Garbage Truck

Plastic Model Kit

This is a Revell 1/24 Garbage Truck Plastic Model Kit. Most garbage trucks are bent, dirty and...full of garbage. But not this garbage truck! This zany and unusual rod is a shiny custom machine with all the equipment needed for swinging beach parties. Surfboards, scuba equipment and, of course, a band complete with a go-go girl vocalist. Take it to the beach, pop it open and enjoy a whole day of surfing, diving and partying. Kit features detailed parts, many chrome-plated parts and an opening rear section with three band figures, four surfboards and scuba equipment.

Features:

• Highly Detailed Plastic Parts Molded in White and Clear

• Includes Chrome Plated Parts and Soft Black Tires

• Opening Rear Section

• Includes Two Band Figures, Four Surfboards and Scuba Equipment

• Waterslide Decals

Specifications:

• Skill Level: 2

• Scale: 1/24

• Length: 6-7/8 Inches

• Width: 3-1/8 Inches

• Height: 4-7/8 Inches

• Parts: 57

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $23.99 Special Price: $21.59

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 GMC Pick Up w/Snow Plow]]> http://www.hobbypeople.net/index.php/revell-1-24-gmc-pick-up-w-snow-plow.html

Revell 1:24 GMC Pickup w/Snow Plow

Plastic Model Kit

This is a Revell 1:24 GMC Pickup with Snow Plow Plastic Model Kit. A snow plow mounted to the front of a pickup truck is a common sight every winter. Featuring four wheel drive and a 350 cubic inch V-8 engine, it doesn't take long for this GMC pickup to clean driveways. High-mounted driving lights help guide the way when darkness falls. Kit features a fully detailed snow plow, a detailed pickup bed, a mounted roll bar with driving lights, a four wheel drive suspension, separate frame pieces, soft black tires, chrome-plated parts and decals with stock and custom graphics.

Features and Specifications:

• Skill Level: 2

• Scale: 1:24

• Length: 8-1/16"

• Width: 3-3/4"

• Height: 3-3/8"

• Number of Parts: 103

• Fully Detailed Snow Plow

• Detailed Pickup Bed

• Roll Bar with Driving Lights

• Four Wheel Drive Suspension and Separate Frame Pieces

• Soft Black Tires

• Chrome-Plated Parts

• Decals with Stock and Custom Graphics

*This is a plastic model kit that requires painting and assembly. Paint and modeling tools required and available separately.

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 LaFerrari]]> http://www.hobbypeople.net/index.php/revell-1-24-laferrari.html

Revell 1/24 LaFerrari

Plastic Model Kit

This is a Revell 1/24 LaFerrari Plastic Model Kit. This kit features detailed plastic parts molded in white and clear. Includes chrome plated parts, soft vinyl tires, detailed V-12 engine and transmission, separate lift-off tail section and positional front wheels.

Features:

• Highly Detailed Plastic Parts Molded in White and Clear

• Includes Chrome Plated Parts and Soft Black Tires

• Detailed V-12 Engine and 7-Speed Transmission

• Separate Lift-Off Tail Section

• Positional Front Wheels

• Waterslide Decals

Specifications:

• Skill Level: 3

• Scale: 1/24

• Length: 7-11/16 Inches

• Width: 3-5/16 Inches

• Height: 1-3/8 Inches

• Parts: 141

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $24.99 Special Price: $22.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Lamborghini Diablo VT]]> http://www.hobbypeople.net/index.php/revell-1-24-lamborghini-diablo-vt.html

Monogram 1/24 Lamborghini Diablo VT

One devilishly fast "super car."

With a Lamborghini it’s all about attitude and the Diablo VT is no different. What else can you say about a premier super car with all wheel drive? The VT system (Viscous Traction) sends up to 25% of the 492 hp from the 5.7 liter V-12 to the front wheels. When it first hit the streets in 1991 the Diablo™ was the fastest production car in the world. It doesn’t take a language expert to know that Diablo means “Devil” in Spanish and judging by this car’s attitude, the moniker is certainly appropriate. This is one mean looking automobile and it’s got performance to match.

When the Diablo VT first hit the streets in 1993, it was the fastest production car in the world. This all-wheel drive speed demon was powered by a 492 hp, 5.7L V-12 engine, which could reach 62 mph (100 km/h) just 4.5 seconds. Top speed was 202 mph (325 km/h). A Viscous Traction (VT) drivetrain delivered 25% torque to the front wheels, boosting traction and handling. Kit features a lift-up rear deck with a highly detailed V-12 engine, full suspension detail, soft black tires, chrome-plated parts and Lamborghini insignia decals.

Features and Specifications

• Skill level: 2

• Molded in white, transparent red with chrome plated parts

• Soft black tires

• Lift-up rear deck with full detail V-12 engine

• Complete upper and lower suspension details

• Decals with classic Lamborghini insignia

• Illustrated instructions

• Scale: 1/24

• Length: 7-1/4"

• Width: 3-3/4"

• Height: 2"

• Parts: 84

Price: $16.99 Special Price: $15.29

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Lamborghini Diablo VT Roadster]]> http://www.hobbypeople.net/index.php/revell-1-24-lamborghini-diablo-vt-roadster.html

Revell 1:24 Snap-Tite Lamborghini Diablo VT Roadster

Plastic Model Kit

This is a Revell 1:24 Snap-Tite Lamborghini Diablo VT Roadster Plastic Model Kit. Introduced in 1995, the Diablo VT Roadster featured an all-wheel drive set-up with a viscous center differential. The Roadster replaced the typical fixed top with an electric carbon fiber targa top and removable roof section. The engine lid was heavily modified so that the V-12 engine had proper ventilation when the roof covered it. Servo-assisted Brembo® four-wheel disc brakes provided superior stopping power. Kit features a screw-on chassis, rolling wheels with metal axles, soft black tires, chrome-plated parts and colorful Peel 'n Stick decals. Standard screwdriver required.

Features and Specifications:

• Skill Level: 1

• Scale: 1:24

• Length: 7-1/4"

• Parts: 32

• Snap-Tite Model - No Glue or Painting Required!

• Screw-On Chassis

• Rolling Wheels with Metal Axles

• Soft Black Tires

• Chrome-Plated Parts

• Peel 'N Stick Decals

• Requires Standard Screwdriver for Assembly

Price: $15.99 Special Price: $14.39

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Li'l Coffin]]> http://www.hobbypeople.net/index.php/revell-1-24-li-l-coffin.html

Revell 1:24 Li'L Coffin

Plastic Model Kit

This is a Revell 1:24 Li'L Coffin Plastic Model Kit.

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 McEwen '57 Chevy Funny Car]]> http://www.hobbypeople.net/index.php/revell-1-24-mcewen-57-chevy-funny-car.html

Revell 1/24 McEwen '57 Chevy Funny Car

Plastic Model Kit

This is a Revell 1/24 McEwen '57 Chevy Funny Car Plastic Model Kit. In 1988, legendary top fuel and funny car drag racer Tom "Mongoose" McEwen introduced his fans to something really new. His new ride featured the classic body shape of the '57 Chevy on a modern funny car chassis. With runs at less than 6 seconds, this funny car could claim to be the fastest '57 Chevy in the world. Molded in white and clear with chrome plated parts and soft black tires. This kit features one-piece flip up body, detailed dual-magneto engine, tube frame, separate rear wing and chrome wheelie bars.

Features:

• Highly Detailed Plastic Parts Molded in White and Clear with Chrome Plated Parts

• Soft Black Tires

• One-Piece Flip Up Body

• Dual-Magneto Engine

• Tube Frame, Separate Rear Wing and Chrome Wheelie Bars

• Waterslide Decals

Specifications:

• Skill Level: 2

• Scale: 1/24

• Length: 9-1/4 Inches

• Width: 2-3/8 Inches

• Height: 2-1/4 Inches

• Parts: 84

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $23.99 Special Price: $21.59

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Miami Vice Daytona Spyder]]> http://www.hobbypeople.net/index.php/revell-1-24-miami-vice-daytona-spyder-61736.html

Revell 1/24 Miami Vice Daytona Spyder

Sonny Crockett and his partner is Ricardo Tubbs prowl the night looking to bust the heavies in Miami's deadly underworld. They are no ordinary vice cops and the Spyder is no ordinary car. Featuring sleek Italian styling, American V-8 power and superb handling, the Spyder is the right machine to handle any case that might come their way. Model kit features detailed High Performance V-8 with dual exhaust and option to build convertible top in the up or down position.

Overview

• Skill Level: 2

• Scale: 1/24

• Length: 7-7/16"

• Width: 2-7/8"

• Height: 2"

• Parts: 78

Miami Vice is a trademark and copyright of Universal Studios. Licensed by NBCUniversal Television Consumer Products Group 2013. All Rights Reserved.

Price: $23.99 Special Price: $21.59

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Miami Vice Ferrari Testarossa]]> http://www.hobbypeople.net/index.php/revell-1-24-miami-vice-ferrari-testarossa-61735.html

Revell 1/24 Miami Vice Ferrari Testarossa

If you're in a "Red Head", get ready for a wild ride

At the beginning of Miami Vice's third season the Daytona Spyder Sonny Crockett had been driving went out with a bang. Shortly thereafter, the Ferrari Testarossa (Red Head) became Crockett's sports car of choice. Powered by 12-cylinder 390 horsepower engines, Testarossas are more than fast enough power to hunt down the criminals of Miami. And with the car's sleek styling, you can look good doing it too. This kit features a detailed 12-cylinder engine, separate side louvers, detailed suspension with dual rear shocks, lifting rear hatch and decals.

Overview

• Skill Level: 2

• Scale: 1/24

• Length: 7-5/16"

• Width: 2-7/8"

• Height: 2-1/4"

• Parts: 96

Miami Vice is a trademark and copyright of Universal Studios. Licensed by NBCUniversal Television Consumer Products Group 2013. All Rights Reserved.

Price: $19.95 Special Price: $17.96

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Motorcraft T-Bird Pro Stock]]> http://www.hobbypeople.net/index.php/revell-1-24-motorcraft-t-bird-pro-stock.html

Revell 1:24 Motorcraft T-Bird Pro Stock

Plastic Model Kit

This is a Revell 1:24 Motorcraft T-Bird Pro Stock Plastic Model Kit.

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $23.99 Special Price: $21.59

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 New Beetle Snaptite]]> http://www.hobbypeople.net/index.php/revell-1-24-new-beetle-snaptite.html

Revell 1:24 New Beetle Snap-Tite

Plastic Model Kit

This is a Revell 1:24 New Beetle Snap-Tite Plastic Model Kit. This Snap-Tite kit features snap together assembly, so no glue is required. Parts are precolored, so no painting is required. Includes illustrated instructions.

Features:

• Easy Snap Together Assembly

• No Painting or Gluing Required

• Detailed Parts

• Illustrated instructions

Specifications:

• Scale: 1:24

• Skill Level: 1

Price: $15.99 Special Price: $14.39

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Original Mini Cooper]]> http://www.hobbypeople.net/index.php/revell-1-24-original-mini-cooper.html

Revell 1:24 Original Mini Cooper

Plastic Model Kit

This is a Revell 1:24 Original Mini Cooper Plastic Model Kit. Mini Coopers were an instant hit when the British Motor Corporation released them in the early sixties. Unlike the large, big-engine cars of the U.S., the Mini Cooper was a compact vehicle equipped with a less powerful engine. They became legends, winning the Monte Carlo Rally four times and a staggering number of wins in lesser races. This kit features an opening hood with detailed 61 ci (998 cc) engine. It can be built for left or right hand drive and has moveable front wheels.

Specifications:

• Skill Level: 2

• Scale: 1:24

• Length: 5"

• Width: 2-1/4"

• Height: 2-1/8"

• Parts: 128

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $23.99 Special Price: $21.59

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Paddy Wagon w/Figures]]> http://www.hobbypeople.net/index.php/revell-1-24-paddy-wagon-w-figures.html

Revell 1/24 Paddy Wagon w/Figures

Plastic Model Kit

This is a Revell 1/24 Paddy Wagon w/Figures Plastic Model Kit. Tom Daniel designed this riotous ride for Monogram back in the sixties. Now you can build this bad boy with officers Sean Fogerty and Patrick O'Reilly, the flavorful flatfoots Tom included in his original concept drawings! Between the big slicks in back and the massive, blown big block engine up front, there isn't a chance you're outrunning these coppers. This kit features parts molded in dark blue metallic and clear with gold plated parts and soft black tires. Figures are fully finished and there is a detailed rear interior.

Features:

• Highly Detailed Plastic Parts Molded in Dark Metallic and Clear

• Gold Plated Parts and Soft Black Tires

• Fully Finished Figures of Officers Fogerty and O'Reilly

• Drop Front Axle and Front Cycle Fenders

• Detailed Rear Interior

• Waterslide Decals

Specifications:

• Skill Level: 2

• Scale: 1/24

• Length: 7 Inches

• Width: 3-1/8 Inches

• Height: 3-1/4 Inches

• Parts: 88

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $27.95 Special Price: $25.16

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 R-M Camaro Pro-Stockgon]]> http://www.hobbypeople.net/index.php/revell-1-24-r-m-camaro-pro-stockgon.html

Price: $23.99 Special Price: $21.59

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/24 Shelby Cobra 427]]> http://www.hobbypeople.net/index.php/revell-1-24-shelby-cobra-427.html

Monogram 1/24 Shelby Cobra 427 S/C

The highly collectible Cobra.

Car history was made on the day that Carroll Shelby first combined a powerful 427 cubic inch engine with a sleek sports car frame. The S/C (semi-competition) version is one of the most collectible. Some S/C models have sold for as much as 1.5 million dollars at car auctions! Kit features an opening hood with a fully detailed 427 cubic inch engine, a side exhaust system, a separate raised convertible top, soft black tires, two-piece wire wheels, chrome-plated parts and decals with authentic Cobra markings and racing stripes.

Overview

• Skill level: 2

• Scale: 1/24

• Length: 6-5/8"

• Width: 2-7/8"

• Height: 2"

• Parts: 101

Price: $19.99 Special Price: $17.99

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/25 '09 Dodge Challenger]]> http://www.hobbypeople.net/index.php/revell-1-25-09-dodge-challenger.html Revell 1/25 '09 Dodge Challenger The 2009 Dodge Challenger SRT8 is a modern version of the iconic Dodge Challenger of the early 70s. All the muscle car and sporty design is here; a 425 horse power engine, dual exhaust, front and rear spoilers, bucket seats and the bulged hood with functional air-intakes. In the 70s the Dodge Challenger was an awesome ride now its even better.
  • Skill Level: 2
  • Length: 7-15/16"
Features
  • Opening hood with detailed 6.1-liter SRT HEMI V8 engine
  • Optional 20 wheels, five spoke forged SRT8 or custom.
  • Authentic factory stock and custom decals.
  • Molded in white, transparent red and clear with chrome plated parts and black vinyl tires.

Price: $24.99 Special Price: $22.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/25 '10 Camaro SS]]> http://www.hobbypeople.net/index.php/revell-1-25-10-camaro-ss.html

Revell 1/25 '10 Camaro SS

V-8 powered fury.

Announced on July 21, 2008, the 2010 Camaro's signature styling was inspired by the classic '69 Camaro. The SS version with automatic transmission features a 400 hp L99 V-8 engine which propels it from 0-60 mph in 4.6 seconds - and a full quarter-mile in 13.1 seconds. Kit features an opening hood with full engine detail, a factory aero package with side skirts and a front spoiler, a choice of SS package or custom wheels, soft black tires, chrome-plated parts and decals with stock markings and two optional accent trim packages.

Features and Specifications

• Skill level: 2

• Scale: 1/25

• Length: 7-5/8"

• Width: 3-1/4"

• Height: 2-1/4"

• Parts: 115

Price: $24.99 Special Price: $22.49

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/25 '10 Ford Mustang Convertible]]> http://www.hobbypeople.net/index.php/revell-1-25-10-ford-mustang-convertible.html

Revell 1/25 '10 Ford Mustang Convertible

All the horsepower you can handle.

The first Ford Mustang convertible introduced in 1964 is an American iconic automobile and now the 2010 Ford Mustang convertible continues the retro-classic evolution. The 2010 Mustang has an all new sculptured aggressive look with its powerdome hood and rear spoiler. The bolder look of the grille design with a new galloping horse Mustang emblem makes you think new modern muscle car.

The first Ford Mustangs hit the scene in 1964. Almost 50 years later, the 2010 model proved that this classic pony car shows no signs of slowing down anytime soon. Discriminating eyes will find that the 2010 model pays tribute to the '64 original, while still breaking new ground for the 21st century. This easy-to-assemble snap kit features a detailed interior, chassis and rear spoiler; metal axles with spoked 19" (483 mm) rolling wheels and disc brakes; soft black tires; chrome-plated parts and peel 'n stick decals with colorful graphics.

Features and Specifications

• Skill Level: 1

• Easy snap-together assembly...no gluing or painting needed

• Molded in gold metallic, black, clear and transparent red

• Chrome plated parts and soft black tires

• Detailed interior, chassis and rear spoiler

• Metal axles with spoked 19" rolling wheels and disc brakes

• Peel 'n stick decals

• Illustrated assembly guide

• Scale: 1/25

• Length: 7-1/2"

• Width: 3-1/8"

• Height: 2-1/4"

• Parts: 43

Price: $15.99 Special Price: $14.39

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/25 '13 Mustang Boss 302]]> http://www.hobbypeople.net/index.php/revell-1-25-13-mustang-boss-302.html

Revell 1/25 2013 Mustang Boss 302

Plastic Model Kit

This is a Revell 1/25 2013 Mustang Boss 302 Plastic Model Kit. With extremely powerful 444h.p. engines, incredible suspension systems and more features than a salesman can fit in his spiel, there's no question that the Mustang Boss 302 is an exceptional car. It's designed to harken back to the glory days of the muscle car while being a modern gear-head's dream. This mechanical marvel is the ultimate blend of artistic design, comfort and technology. It's well deserving of a prize display place. This kit features detailed engine, exhaust and suspension systems.

Features:

• Detailed Plastic Parts Molded in White and Clear with Chrome Plated Parts

• Soft Black Tires

• Detailed Engine, Exhaust and Suspension

• Waterslide Decals

Specifications:

• Skill Level: 3

• Scale: 1/25

• Length: 7-1/4 Inches

• Width: 3-1/8 Inches

• Height: 2-1/4 Inches

• Parts: 120

*This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/25 '29 Ford Rat Rod]]> http://www.hobbypeople.net/index.php/revell-1-25-29-ford-rat-rod.html

Revell 1/25 '29 Ford Rat Rod

Custom craziness, in commanding 1/25 scale.

There’s a new car culture crazy these days and it’s called Rat Rods. While they may look “ratty”, they can be very expensive to build. What they provide is the chance to be creative. First start with an early model Ford or similar car and then paint it in primer colors. The next step is adding parts that appear to be junk, but that’s not always the case. In the end these “Rat Rods” bring back the flavor of hot rodding from the 50s when kids made them for fun. Since building it “your way” is what Rat Rodding is all about this Revell kit provides the parts to build it a number of different ways. Just like real Rat Rods the selection is up to the builder. The engine is an early Ford 4 cylinder, but it too can be built differently.

Rat rods aren't your old man's ride. They're crazy custom creations covered in rust, blemishes and flat primer - and they're taking the auto world by storm. Rat rods may not be pristine, but they've inspired the hearts and minds of those who like hot rods with attitude. Spirit and speed are the stars here, and rat rods have plenty of both. Kit features a choice of two different cab styles, opening doors, soft vinyl tires, chrome-plated parts, three different wheel styles and Rat Rod custom decals.

Features and Specifications

• Skill level: 3

• Scale: 1/25

• Length: 6-1/2"

• Width: 2-3/4"

• Height: 2-5/8"

• Parts: 159

Price: $22.99 Special Price: $20.69

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/25 '31 Ford Model A Rat Rod]]> http://www.hobbypeople.net/index.php/revell-1-25-31-ford-model-a-rat-rod.html

 

Revell 1/25 '31 Ford Model A Rat Rod

The trendy, show-stopping hot rod.

"Rat Rods" are the latest trend to sweep the hot rod world. Special touches - like primer paint and blanket seat covers - give them a special "homemade" look not found on other custom creations. One of the most popular cars for "Rat Rod" building is the 1931 Ford Model A. Kit features a detailed four-cylinder Ford engine with a choice of stock or "speed" equipment, opening doors, multiple seat choices, soft black tires, a choice of "steely" wheels or modern mags, chrome-plated parts and colorful hot rod decals.

Features and Specifications

• Skill level: 3

• Scale: 1/25

• Length: 8-1/4"

• Width: 2-1/4"

• Height: 2-15/16"

• Parts: 187

Price: $23.99 Special Price: $21.59

]]>
Tue, 02 Sep 2014 15:27:57 +0000
<![CDATA[Revell 1/25 '32 Ford 5-Window Coupe]]> http://www.hobbypeople.net/index.php/revell-1-25-32-ford-5-window-coupe.html Revell 1/25 '32 Ford 5-Window Coupe The 1932 Ford 5 Window Coupe has two door windows, two quarter panel windows and a rear window and is one of the most popular subjects to become a street rod. The 32 Ford, commonly called the Deuce, is an ideal hot rod because the original '32s were popular and had large production numbers and they were readily available from the '40s to the '60s.

Now because of the demand these cars have become highly collectible and very expensive. High-boy style custom or full fender street rod custom with steel wheels or five spoke mags. Optional 5.0 liter Mustang engine or custom dual carburetor V8.
  • Skill Level 3
  • Scale: 1:25
  • Parts: 187
Includes:
  • Decals with optional custom graphics
  • 187 pieces molded in white, transparent red clear with chrome-plated parts
  • Black vinyl tires

  • This is a kit that requires paint and glue (not included). Skill Level 3 for experienced modelers.

    Price: $24.99 Special Price: $22.49

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '32 Ford Sedan Orange Crate]]> http://www.hobbypeople.net/index.php/revell-1-25-32-ford-sedan-orange-crate.html

    Revell 1/25 '32 Ford Sedan Orange Crate

    The citrus-fueled phenom!

    The Orange Crate® became the first car to win the Los Angeles Winternationals Award two years in a row. It also took the 1963 Oakland Trophy to become the first car ever to win both awards in two successive years. Additionally, the Orange Crate® won trophies in every show in which it has been entered. The Orange Crate® is built around a blown V8 engine that is mounted on an all chrome, hand crafted tubular frame. It has the popular “deuce” body, chopped and channeled, with re-shaped and molded rear fenders and the final imaginative touch of hinges on the rear for display and maintenance purposes. Kit features a one-piece hinged body with chopped top, a detailed blown engine, a chrome exhaust system, an all-chrome tubular frame, opening doors, a detailed interior, soft black tires and decals with authentic Orange Crate graphics.

    Features and Specifications

    • Skill level: 3

    • Highly detailed pieces molded in white

    • Chrome plated parts and soft black tires

    • One piece body with copped top

    • Body hinged for display

    • Opening doors with detailed interior

    • Detailed blown engine, all chrome tubular frame and chrome exhaust system

    • Waterslide decals with authentic Orange Crate graphics

    • Illustrated instructions

    • Scale: 1/25

    • Length: 5-3/4"

    • Width: 3"

    • Height: 2-1/2"

    • Parts: 118

    Price: $22.99 Special Price: $20.69

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '34 Ford Street Rod SnapTite]]> http://www.hobbypeople.net/index.php/revell-1-25-34-ford-street-rod-snaptite.html Revell 1/25 '34 Ford Street Rod SnapTite Easily the best looking of the 32-35 Fords was the '34 model year. With its long hood and distinctive slanted grille, it can't be missed at any of the rod runs or car shows it attends. Begging to be customized, street rodder's the world over have done everything imaginable from high-powered engines to chromed dropped axles to updated tuck-n-roll interiors. Add a hi-tech steering wheel, mail-slot taillights, chopped top, chromed headlights and you've got a "Best-In-Show" candidate every time!

    Accurately detailed bodywork molded in durable purple polystyrene. Snap-together assembly. Parts provided to build either a Street Rod with fenders or a Highboy without fenders. Well-appointed interior and chassis. Rolling wheels. Treaded vinyl tires and 5-spoke wheels with chrome plating. Metal axles. Optional peel 'n stick graphic
    • Scale: 1:25
    • Length: 6-7/16"
    • Width: 2-3/4"
    This is a SnapTite model that does not require paint or glue. Skill Level 1.

    Price: $15.99 Special Price: $14.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '37 Ford Panel Delivery]]> http://www.hobbypeople.net/index.php/revell-1-25-37-ford-panel-delivery.html

    Revell 1/25 '37 Ford Panel Delivery

    From Chicago to everywhere

    Panel trucks like these helped turn a small wholesale foods business started for $400 into a sprawling multi-national, multi-million dollar corporation. The Sexton Foods Corporation® used panel trucks and railcars to transport millions of dollars in groceries to colleges, restaurants and the army. These panel trucks are pickups converted with larger enclosed cargo cabins for transporting bulk orders that don't require a semi-tractor or full-size truck. This kit features a detailed Flathead V-8, interior with simulated wood floor and choice of three decal versions.

    Overview

    • Skill Level: 2

    • Scale: 1/25

    • Length: 7-1/4"

    • Width: 2-3/4"

    • Height: 3"

    • Parts: 110

    Price: $19.95 Special Price: $17.96

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '41 Willys Pickup]]> http://www.hobbypeople.net/index.php/revell-1-25-41-willys-pickup.html

    Revell 1/25 '41 Willy's Pickup

    The original race truck

    The Willys Corporation helped produce over half a million Jeeps® during World War II. That experience helped them design the Willys Pickup, a one-ton or half-ton four-wheel-drive truck. After the war, the Willys Pickup became popular with farmers and hunters and eventually with drag racers. It was perfectly sized for "Gasser" drag racing. This kit features a detailed blown big block engine, "Gasser" drivetrain, opening doors with twin bucket seats, separate pickup bed with tonneau cover and colorful decals with hot rod and custom graphics.

    Overview

    • Skill Level: 3

    • Scale: 1/25

    • Length: 6-1/8"

    • Width: 3-3/4"

    • Height: 2-3/4"

    • Parts: 93

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '49 Mercury Custom Coupe 2-n-1]]> http://www.hobbypeople.net/index.php/revell-1-25-49-mercury-custom-coupe-2-n-1.html Revell 1/25 '49 Mercury Custom Coupe 2-n-1 This Special Edition '49 Mercury allows you to individualize your custom chopped top body car. You can design this model many different ways with all the features included in this kit.

    Accurately reproduced bodywork molded in white polystyrene. Two sets of bumpers, three grilles, two hoods, two sets of fender skirts, spotlights, lake pipes, and two custom taillights. Complete interior detail. Highly detailed engine. Metal axles with rolling wheels and tires with realistic tread. Colorful waterslide custom decals. Easy to assemble with illustrated assembly guide.
    • Skill Level 3
    • Scale: 1:25
    • Length: 8-1/8"
    • Parts: 140

    Price: $24.99 Special Price: $22.49

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '49 Mercury Woody Wagon]]> http://www.hobbypeople.net/index.php/revell-1-25-49-mercury-woody-wagon.html

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '50 Ford PickUp 2 N 1]]> http://www.hobbypeople.net/index.php/revell-1-25-50-ford-pickup-2-n-1.html Revell 1/25 '50 Ford PickUp 2 N 1 Revell 1/25 '50 Ford PickUp 2-N-1

    The Ford F-series pickups started out as simple trucks used to haul feed and hay on the farm, or tools on a construction site. These haulers became fashionable with customizers and rod builders as time went by, and they are now some of the hottest rides on the streets.

    This is the perfect kit for the individual who likes to customize their model. With optional custom wheels with low profile tires, or stock with white walls and flipper hubcaps, you can build the look you desires. With over 150 parts including wooden pickup bed rails, dual exhaust and custom hot rod lettering with vintage scallop decals, this will be a model worthy of displaying.
    • Skill level 2
    • Length: 7-5/8"
    • Parts: 154
    Features
    • Flathead V-8 engine with Ardun heads.
    • Optional custom wheels with low profile tires or stock with white walls and flipper hubcaps.
    • Wooden pickup bed rails and dual exhaust.
    • Custom hot rod lettering and vintage scallop decals.
    • Molded in white, transparent red and clear with chrome plated parts and black vinyl tires.
    • Colorful waterslide decals.
    • Illustrated assembly guide.

    Price: $22.99 Special Price: $20.69

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '50 Old Coupe 2N1]]> http://www.hobbypeople.net/index.php/revell-1-25-50-old-coupe-2n1.html

    Revell 1:25 '50 Oldsmobile Club Coupe 2'n1

    Plastic Model Kit

    This is a Revell 1:25 '50 Oldsmobile Club Coupe 2'n1 Plastic Model Kit. Designers at Oldsmobile intentionally overpowered the '50 Club Coupe by dropping a V8 engine into a formerly V6 driven chassis. The resulting fast, light racer won 10 of the 19 NASCAR competitions in 1950. Versions of this popular car stayed in production until 1999.

    This kit features molded white and clear resin with chrome detailing and has soft tires, rear fender skirts, chrome trim rings, whitewall tires, and decals with factory stock markings. Frame comes separate from stock car racer interior for easy customization before installation.

    Features and Specifications:

    • Skill Level: 3

    • Scale: 1:25

    • Length: 8" (203.2mm)

    • Width: 3" (76.2mm)

    • Height: 2-5/8" (66.67mm)

    • Parts: 135

    • Detailed Molded White and Clear Parts with Chrome Detailing

    • Soft Rubber Whitewall Tires

    • Rear Fender Skirts and Chrome Trim Rings

    • Decals with Factory Stock Markings

    *This is a plastic model kit that requires painting and assembly. Modeling tools and supplies sold separately.

    Price: $25.99 Special Price: $23.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '50 Olds Custom]]> http://www.hobbypeople.net/index.php/revell-1-25-50-olds-custom.html

    Revell 1:25 '50 Olds Custom

    Plastic Model Kit

    This is a Revell 1:25 '50 Olds Custom Plastic Model Kit.

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '53 Chevy Panel]]> http://www.hobbypeople.net/index.php/revell-1-25-53-chevy-panel.html

    Revell 1:25 '53 Chevy Panel

    Plastic Model Kit

    This is a Revell 1:25 '57 Chevy Panel Plastic Model Kit.

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $22.99 Special Price: $20.69

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '55 Chevy Bel Air Convertible]]> http://www.hobbypeople.net/index.php/revell-1-25-55-chevy-bel-air-convertible.html

    An all-time classic and considered one of the "10 Best" American cars, the '55 Chevy Bel Air captured the spirit of the "Grease" generation with all-new styling and design. Detailed 265 V-8 power pack engine. Continental tire mount, fender skirts and top up and down. Decals with stock and colorful custom graphics. Molded in white, transparent red and clear with chrome plated parts and soft black tires.

    • Skill level: 3
    • Scale: 1/25
    • Length: 8-1/4"
    • Parts: 81

    Price: $23.49 Special Price: $21.14

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '56 Chevy Nomad 2N1]]> http://www.hobbypeople.net/index.php/revell-1-25-56-chevy-nomad-2n1.html

    Revell 1/25 '56 Chevy Nomad 2N1

    The true traveler's choice.

    Probably no other car has impacted middle class America quite the way the 1955-57 Chevrolet® did. For the first time, GM made OHV V8 engine horsepower available in a popularly priced car. Previously, such an engine was installed mostly in premium priced sedans. The new V8 Chevrolet changed all that. The famous "Tri-Chevy® Nomad® wagons" were built on their particular chassis for only three years; 1955 to 1957. So also was the two-door hardtop Nomad wagon. Your Revell kit is the 1956 version. The landmark chassis is represented in full detail. Based on a GM Motorama concept, customers said owning a Nomad was like driving a show car.

    Like many Chevys that year, the '56 Nomad had many design changes. Instead of recycling the '55's front end (which looked like a Ferrari®), Chevy modified the '56 to include a full-width grille. A powerful V-8 engine helped make the Nomad a favorite of drivers everywhere. Today, the '56 Nomad remains a popular attraction at auto shows all over the country! Kit features a highly detailed chassis, a detailed V-8 engine, a realistic interior, soft black tires, chrome-plated parts, optional large-diameter custom wheels, stock wheels and California-style custom graphic decals.

    Features and Specifications

    • Skill level: 2

    • Scale: 1/25

    • Length: 8-1/16"

    • Width: 2-3/4"

    • Height: 2"

    • Parts: 155

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '56 Ford F-100 Pickup]]> http://www.hobbypeople.net/index.php/revell-1-25-56-ford-f-100-pickup.html

    Revell 1/25 '56 Ford F-100 Pickup

    Ed "Big Daddy" Roth's rockin' ride!

    Well: You didn’t really expect ED “Big Daddy” Roth™ to drive a normal pickup truck to work every day, did you? As a tribute to Big Daddy, Revell presents Ed’s everyday “work” truck that was just as wild as any show car Ed created during the ’60s. Of course, in its day, a ’56 pickup truck with an eye- popping flame paint job and an outrageous mural on the tonneau cover were enough to turn heads wherever it went. Roth’s wild sense of humor and even wilder show cars were staples of the era and his daily driver reflects that spirit. And you have to wonder how many folks followed Ed’s truck back to the garage to get a peek inside at “the good stuff!”
     

    Features and Specifications

    • Skill Level: 3

    • Highly detailed pieces molded in white and clear

    • Chrome plated parts and soft black tires

    • Opening doors and Thunderbird V-8 motor

    • Choice of interior styles

    • Waterslide decals with wild flame graphics including tonneau cover mural

    • Illustrated instructions

    • Scale: 1/25

    • Length: 7-5/8"

    • Width: 3-1/8"

    • Height: 2-15/16"

    • Parts: 120

    Price: $21.99 Special Price: $19.79

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '57 Chevy Bel Air]]> http://www.hobbypeople.net/index.php/revell-1-25-57-chevy-bel-air.html

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '57 Chevy Bel Air SnapTite]]> http://www.hobbypeople.net/index.php/revell-1-25-57-chevy-bel-air-snaptite.html Revell 1/25 '57 Chevy Bel Air SnapTite '57 Chevrolet Bel Air

    Mention the 1950's to an American car fan and most will recall the fins on a 1957 Chevrolet. It's hard to say exactly why-the Chevy wasn't even the best selling car of '57. Revell's new Easy Kit version of this timeless classic allows even those with a minimum of time or building experience to assemble a replica you'll be proud to display on your shelf or in your office. Features: Snap construction to eliminate glue, color-molded parts, and large diameter custom wheels with low profile tires.
    • Skill Level 1
    • Scale: 1:25
    • Length: 8"
    • Width: 3"
    • Parts: 35+
    This is a SnapTite model that does not require paint or glue. Skill Level 1.

    Price: $15.99 Special Price: $14.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '57 Chevy Bel Air Two-Door Sedan 2n1]]> http://www.hobbypeople.net/index.php/revell-1-25-57-chevy-bel-air-two-door-sedan-2n1.html Revell 1/25 '57 Chevy Bel Air Two-Door Sedan 2n1 The 1957 Chevrolet is one of the most popular and widely recognized cars in history, and a true American classic. With its great looks and easily hot rodded V-8 engine, the '57 Chevy is a hot rodder's and customizer's dream. Detailed stock 283 cubic inch V-8 or 283 V-8 with custom valve covers, air cleaner and alternator. Optional stock or lowered suspension, stock wheels with white wall tires, custom five spoke wheels or chrome wheels with moon cap and low profile tires. Decal with factory stock markings and interior panels plus custom flame graphics. Molded in white, clear and transparent red with chrome plated parts and soft black tires.
    • Skill Level: 2
    • Scale: 1:25
    • Length: 8-1/8"
    • Parts: 150

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '57 Chevy Convertible]]> http://www.hobbypeople.net/index.php/revell-1-25-57-chevy-convertible.html

    Price: $22.99 Special Price: $20.69

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '57 Fireball Roberts Ford]]> http://www.hobbypeople.net/index.php/revell-1-25-fireball-roberts-57-ford.html

    Revell 1:25 '57 Fireball Roberts Ford

    Plastic Model Kit

    This is a Revell 1:25 '57 Fireball Roberts Ford Plastic Model Kit. This model of the '57 Fireball Roberts Ford features detailed plastic parts, chrome plated parts where appropriate and soft black tires. A detailed 312 V-8 with Supercharger and 50's style detailed interior finishes off this classic.

    Features:

    • Highly Detailed Plastic Parts Molded in White and Clear

    • Chrome Plated Parts and Soft Black Tires

    • Detailed 312 V-8 Engine with Supercharger

    • 50's Style Racing Interior and Bodywork Modifications

    • Racing Suspension Parts

    • Waterslide Decals

    • Illustrated instructions

    Specifications:

    • Scale: 1:25

    • Skill Level: 3

    • Length: 8.0 Inches (203.2mm)

    • Width: 3.0 Inches (76.2mm)

    • Height: 2.375 Inches (60.3mm)

    • Parts: 122

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '57 Ford Custom 2N1]]> http://www.hobbypeople.net/index.php/revell-1-25-57-ford-custom-2n1.html

    Revell 1:25 1957 Ford Custom 2 'n 1

    Plastic Model Kit

    This is a Revell 1:25 1957 Ford Custom 2 'n 1 Plastic Model Kit. Drag racers loved the '57 Ford Custom because it was a simple no-frills car that was easy to modify. Its long body and low-slung chassis made it perfect for short straight-course races. The exceptionally light 2-door model came with a 245 horsepower V-8 - more than enough power to boost the '57 to victory after victory. With racing slicks, the Custom could beat most cars of the day in straight drag. Kit features drag racing slicks and suspension, plus separate frame member and bench style front seat.

    Features and Specifications:

    • Skill Level: 3

    • Scale: 1:25

    • Length: 8 Inches (203.2mm)

    • Width: 3 Inches (76.2mm)

    • Height: 2-3/8 Inches (60.3)

    • Parts: 129

    • Highly Detailed Plastic Model Kit

    • Drag Racing Slicks and Suspension

    • Separate Frame Member

    • Bench Style Front Seat

    *This is a plastic model kit that requires painting and assembly. Paint and tools are required and are available separately.

    Price: $25.99 Special Price: $23.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '58 Corvette Roadster]]> http://www.hobbypeople.net/index.php/revell-1-25-58-corvette-roadster.html

    Revell 1/25 '58 Corvette Roadster

    Plastic Model Kit

    This is a Revell 1/25 Corvette Roadster Plastic Model Kit. Other sporty two-seaters have come and gone, but Corvettes have made American hearts thump for decades. Their combination of performance and elegance makes every generation timeless. The 1958 Vette was a distinctive part of the "solid axle generation" that sported substantial modifications. Among the most notable of these mods were hood louvers and trunk lids spears, changes only found on the 1958. This kit features separate frame, opening trunk lid, multi-position front wheels and detailed V-8 with choice of fuel injection or carburetors.

    Features:

    • Highly Detailed Plastic Parts Molded in White, Transparent Red and Clear with Chrome Plated Parts

    • Soft Black Tires with Multi-Position Front Wheels

    • Separate Frame

    • Opening Trunk Lid

    • Detailed V-8 Engine with Choice of Fuel Injection or Carburetors

    • Waterslide Decals

    Specifications:

    • Skill Level: 3

    • Scale: 1/25

    • Length: 6-7/8 Inches

    • Width: 2-13/16 Inches

    • Height: 2-1/16 Inches

    • Parts: 149

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '59 Chevy Impala]]> http://www.hobbypeople.net/index.php/revell-1-25-59-chevy-impala.html

    Revell 1/25 '59 Chevy Impala

    2 'n 1 Plastic Model Kit

    This is a Revell 1/25 '59 Chevy Impala 2 'n 1 Plastic Model Kit. While the first Impala was introduced in 1958, it was the completely restyled 1959 Impala that made everyone take notice. The styling was all new, with a longer, lower design that took the Impala to number one in sales. The restyled version also included the new "vista" roof design. However, the '59 will always be remembered for its wild tail fins and large tail lights. This kit features detailed 348 W-series Turbo Thrust V-8, choice of custom features and Continental spare tire. Molded in white, transparent red and clear, with chrome plated parts and soft black tires.

    Features:

    • Highly Detailed Plastic Parts Molded in White, Transparent Red and Clear with Chrome Plated Parts

    • Soft Black Tires

    • Detailed 348 W-Series Turbo Thrust V-8 Engine

    • Choice of Custom Features and Continental Spare Tire

    Specifications:

    • Skill Level: 3

    • Scale: 1/25

    • Length: 8-5/8 Inches

    • Width: 3-1/8 Inches

    • Height: 2-3/16 Inches

    • Parts: 165

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '60 Chevy Impala Hardtop 2n1]]> http://www.hobbypeople.net/index.php/revell-1-25-60-chevy-impala-hardtop-2n1.html Revell 1/25 '60 Chevy Impala Hardtop 2n1 Chevrolet toned down the outrageous styling of the '59 Impala for 1960 and created another classic at the same time. The '60 Impala has been a favorite of the customizers and street machine builders for years.
    • Skill Level: 2
    • Scale: 1:25
    • Length: 8-1/2"
    • Parts: 169
    Features
    • Opening hood and trunk, detailed engine, interior and custom taillights.
    • Optional stock suspension and wheels or lowered suspension with custom wheels.
    • Decals with stock factory and colorful custom graphics.
    • Molded in white, clear and transparent red with chrome plated parts and black vinyl tires.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '62 Chevy Impala Hardtop 2n1]]> http://www.hobbypeople.net/index.php/revell-1-25-62-chevy-impala-hardtop-2n1.html

    Revell 1/25 '62 Chevy Impala Hardtop 2n1 Style was paramount when the 1962 Chevrolet Impala made its debut. The 1962 Impala Hardtop had a new C pillar styling and featured the convertible roof styling which was shared with other GM full size hardtop coupes. This new styling proved to be extremely popular and contributed to the collectability of the 1962 Impalas. Detailed 409 cu. in.V-8 with dual carburetors and full wheel hub caps or steel wheels with dog dish caps. Optional drag race headers, exhaust, roll bar and raised rear suspension with racing slick tires. Decals with colorful stock and custom graphics. Molded in white, transparent red and clear with chrome plated parts and soft black tires.

    • Scale: 1/25
    • Length: 8-7/16" (214.31mm)
    • Skill level: 3
    • Parts: 152

    Price: $25.99 Special Price: $23.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '62 Chevy Impala SS 2N1]]> http://www.hobbypeople.net/index.php/revell-1-25-62-chevy-impala-ss-2n1.html

    1/25 '62 Chevy® Impala™ SS™ Hardtop

    2'n 1 Plastic Model Kit

    Two terrific ways to build the collectible classic.

    The '62 Impala SS was only the second Super Sport model, but it proved that drivers didn't have to sacrifice style for peak performance. Options included a 409 cu. in. V-8 engine and an engine-turned aluminum panel to house the triple taillight assembly. Kit features a detailed 409 cu. in. V-8 with dual carbs, an optional custom air cleaner and finned valve covers. Also included are bucket seats, a choice of stock wheels and tires or custom wheels with low-profile tires, chrome-plated parts and decals with stock and custom graphics.

    • Skill Level: 2

    • Scale: 1/25

    • Length: 8-7/16"

    • Parts: 149

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '62 Corvette Roadster 2N1]]> http://www.hobbypeople.net/index.php/revell-1-25-62-corvette-roadster-2n1.html

    Revell 1:25 1962 Corvette Roadster 2 'n 1

    Plastic Model Kit

    This is a Revell 1:25 1962 Corvette Roadster 2 'n 1 Plastic Model Kit. Relive the glory days of the iconic 1962 Corvette. With its distinctive looks and powerful engine, the original 'vettes were a huge hit with WWII veterans looking for a thrill. The 340 horsepower engine of this car was sure to blow their hair back, after all the first generation Corvettes only came in convertible models. Kit features parts molded in white, red and clear resin with chrome details, a separate chassis, a chrome-plated windshield frame, custom soft black tires/wheels and factory decals.

    Features and Specifications:

    • Scale: 1:25

    • Skill Level: 3

    • Length: 6-3/4 Inches

    • Width: 2-7/8 Inches

    • Height: 2 Inches

    • Parts: 148

    • Highly Detailed Parts Molded in White, Red and Clear with Chrome Details

    • Separate Chassis and Chrome-Plated Windshield Frame

    • Custom Soft Black Tires

    • Factory Decal Set

    *This is a plastic model kit that requires painting and assembly. Paint, modeling tools and supplies required, and are available separately.

    Price: $25.99 Special Price: $23.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '62 D&M Corvette Gasser]]> http://www.hobbypeople.net/index.php/revell-1-25-d-m-62-corvette-gasser.html

    Revell 1:25 '62 D&M Corvette Gasser

    Plastic Model Kit

    This is a Revell 1:25 '62 D&M Corvette Gasser Plastic Model Kit.

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '63 Chevy Impala SS 2N1]]> http://www.hobbypeople.net/index.php/revell-1-25-63-chevy-impala-ss-2n1.html

     

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '63 Corvette Convertible SnapTite]]> http://www.hobbypeople.net/index.php/revell-1-25-63-corvette-convertible-snaptite.html

    Revell 1/25 '63 Corvette Convertible SnapTite Chevrolet stunned the automotive world when they unveiled the all-new 1963 Corvette. Besides adding a new surname-Sting Ray-the new Vette featured a new chassis with independent rear suspension for better handling. The big news that everyone talked about was the gorgeous new fiberglass body. At a time when new American cars usually had more shiny chrome plate than most kitchens, the Corvette mercifully had a minimum of brightwork. With its sharp edges and futuristic looking flip-around hidden headlamps, the new Sting Ray could compete, styling-wise at least, with almost any other new car the world over.

    • Skill Level 1
    • Scale: 1:25
    • Length: 7"
    • Width: 2-3/4"
    • Parts: 25+

    Features:

    • Tough snap construction and color-molded parts to eliminate needing paint or glue
    • Large diameter chrome wheels
    • Colorful stick-on graphics

    Price: $15.99 Special Price: $14.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '63 Corvette Sting Ray Coupe]]> http://www.hobbypeople.net/index.php/revell-1-25-63-corvette-sting-ray-coupe.html

    Revell 1:25 1963 Corvette Sting Ray Coupe

    Plastic Model Kit

    This is a Revell 1:25 1963 Corvette Sting Ray Coupe plastic model kit. The 1963 Sting Ray Coupe's signature design was heavily influenced by the iconic Jaguar® E-Type sports car. The car's distinctive pointed nose came from a more unusual source: the sleek Mako shark. The 1963 model was the first of five second-generation Corvette Sting Rays, which often command top-dollar bids at today's auto auctions. Kit features a screw-on chassis, soft black tires, rolling wheels with metal axles, chrome-plated parts and colorful Peel 'n Stick decals. Standard screwdriver required for final assembly.

    Features:

    • Skill Level: 1

    • Scale: 1:25

    • Length: 7"

    • Width: 2-3/4"

    • Height: 1-7/8

    • Parts: 32

    • Screw-On Chassis

    • Soft Black Tires

    • Rolling Wheels with Metal Axles

    • Chrome-Plated Parts

    • Colorful Peel 'N Stick Decals

    *Standard screwdriver required for final assembly.

    Price: $15.99 Special Price: $14.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '64 Chevy Impala Foose]]> http://www.hobbypeople.net/index.php/revell-1-25-64-chevy-impala-foose.html

    Revell 1:25 '64 Chevy Impala Foose

    Plastic Model Kit

    This is a Revell 1:25 '64 Chevy Impala Foose Plastic Model Kit. Chevy Impalas have been top sellers ever since their introduction in 1958; the '64 stands out by being one of the best-selling Impalas of all time. Its low-slung chassis, powerful engine and wide wheelbase made it very popular with consumers in the mid-sixties and it is still regarded as a classic today. Today, its X frame is popular with people interested in modifying the vehicle's ride height and suspension. This kit features a detailed chassis with choice of suspension settings, large diameter Foose design wheels, V-8 engine and opening trunk.

    Specifications:

    • Skill Level: 2

    • Scale: 1:25

    • Length: 8-1/2 Inches (216mm)

    • Width: 3 Inches (76mm)

    • Height: 2-1/4 Inches (57mm)

    • Parts: 144

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '65 Chevelle SS 396 Z-16]]> http://www.hobbypeople.net/index.php/revell-1-25-65-chevelle-ss-396-z-16.html

    Revell 1/25 '65 Chevelle SS 396 Z-16

    Legendary muscle

    Only 201 Z-16s were built, but they became one of the highest-performing cars of the era. Because of their short production run, classy looks and pristine performance, Chevelle SS 396 Z-16s are avidly sought after by collectors. This model may not roar past 100 at 6,000 RPM, but build this model and you build a piece of automotive history. This kit features a detailed 396ci. Big Block V8 with four speed transmission, choice of stock SS wheels with large diameter rims and separate chrome door handles and side trim.

    Overview

    • Skill level: 2

    • Scale: 1/25

    • Length: 7-7/8"

    • Width: 3"

    • Height: 2-1/4"

    • Parts: 129

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '65 Chevy Impala]]> http://www.hobbypeople.net/index.php/revell-1-25-65-chevy-impala.html

    Revell 1:25 '65 Chevy Impala

    Plastic Model Kit

    This is a Revell 1:25 '65 Chevy Impala Plastic Model Kit. This assembly kit features detailed plastic parts molded in white, transparent red and clear. Includes chrome-plated parts and soft black tires. Specialty features include custom Foose designed wheels, detailed Chevy engine and detailed interior with separate console.

    Specifications:

    • Skill Level: 2

    • Scale: 1:25

    • Length: 8-1/2 Inches (215.9mm)

    • Width: 3 Inches (76.2mm)

    • Height: 2-1/4 Inches (57.1mm)

    • Parts: 142

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '65 Chevy Stepside Pickup 2n1]]> http://www.hobbypeople.net/index.php/revell-1-25-65-chevy-stepside-pickup-2n1.html Revell 1/25 '65 Chevy Stepside Pickup 2n1 Vintage pickup trucks are more popular than ever these days, as auto enthusiasts everywhere are rediscovering their appeal. This '65 Chevy Stepside Pickup will stand out at any car show and turn heads at cruise nights but it can also still be a work horse to carry loads.
    • Skill Level: 2
    • Scale: 1:25
    Features
    • Detailed 283 V-8 engine with optional engine parts and disc brakes.
    • Chrome reversed wheels with moon hubcaps and whitewall tires or five spoke mag wheels with low profile tires.
    • Decals with stock or optional custom graphics.
    • Molded in white, clear and transparent red with chrome plated parts and black vinyl tires.

    Price: $22.99 Special Price: $20.69

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '66 Chevelle Station Wagon]]> http://www.hobbypeople.net/index.php/revell-1-25-66-chevelle-station-wagon.html

    Revell 1/25 '66 Chevelle Station Wagon

    The kids have to go somewhere

    In front of the "A" pillar, the '66 Chevelle Station Wagon is all muscle car. It was built with the same engine and drive train as one of the most potent muscle cars in history, the Chevelle. But you have to put the kids somewhere. The station wagon's designers stretched the two-door, four-seat car into a four-door, eight-seat wagon. Gone were the sport-spec performance and six packs, replaced by cargo capacity and diaper bags. This kit features a detailed Chevy® big block engine, custom wheels and color decals.

    Overview

    • Skill level: 2

    • Scale: 1/25

    • Length: 7-7/8"

    • Width: 3"

    • Height: 2-1/2"

    • Parts: 125

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '66 Chevy El Camino 2-n-1]]> http://www.hobbypeople.net/index.php/revell-1-25-66-chevy-el-camino-2-n-1.html Revell 1/25 '66 Chevy El Camino 2-n-1 Revell 1/25 '66 Chevy El Camino 2-n-1

    When it was introduced in 1959, the half-car, half-truck El Camino was based on the full-size Chevy platform. By the time it moved to the ChevelleTM platform in '64 it was becoming downright muscular. For 1966, the El Camino was available with the big block 396 c.i. engine, making it a truck that could do any job in a hurry!
    • Scale: 1:25
    • Length: 7-7/8"
    • Parts: 124

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '66 Chevy SS 396 Hardtop]]> http://www.hobbypeople.net/index.php/revell-1-25-66-chevy-ss-396-hardtop.html Revell 1/25 '66 Chevy SS 396 Hardtop The1966 Impala Super Spot was the flag ship of the Chevrolet line and the emphasis was on performance as well as good looks. Today, the timeless design of the 66 Chevy Impala SS is just as striking as it was the day the first unit rolled off the assembly line. This is why large numbers of Chevy enthusiasts are devoting endless amounts of time, energy and money to the pursuit of restoring, customizing and collecting these milestone cars. Highly Detailed Turbo-Jet 396 V-8 with four speed standard transmission. Interior with front bucket seats and center console and full wheel covers with spinners. Decals with stock factory and custom graphics. Molded in white, clear and transparent red with chrome plated parts and soft black tires.
    • Skill level: 2
    • Length: 8 1/2"
    • Parts: 122

    Price: $21.99 Special Price: $19.79

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '67 Chevelle SS 396]]> http://www.hobbypeople.net/index.php/revell-1-25-67-chevelle-ss-396.html

     

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '67 Dodge Charge Foose]]> http://www.hobbypeople.net/index.php/revell-1-25-67-dodge-charge-foose.html

    Revell 1/25 '67 Dodge Charger 426 HEMI

    Take pride in your sweet ride

    The Dodge Charger is one of the best known muscle cars in the world. This particular model is a Charger completely redesigned by equally famous car designer Chip Foose. It's hard to improve on a classic, but a brand new, sleek body design and sweet new paint job will take you a long way and a 426 HEMI can take you anywhere. This kit features a detailed Dodge Charger, redesigned by Chip Foose. It includes a shaker hood scoop, detailed engine, custom wheels and separate interior side panels.

    Overview

    • Skill Level: 2

    • Scale: 1/25

    • Length: 8-1/8"

    • Width: 2-7/8"

    • Height: 2-1/8"

    • Parts: 134

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '67 Dodge Coronet]]> http://www.hobbypeople.net/index.php/revell-1-25-67-dodge-coronet.html

    Revell 1/25 '67 Dodge Coronet

    Ever seen an elephant run at 100 mph (160 km/h)?

    Designed with V-8 engines and extra-long bodies, Coronets quickly picked up the "Funny Car" nickname when they were entered into NHRA® competitions. But there was nothing funny about their 426 cu. cm., 425 horsepower, 7.0L engines. These "elephant" engines gave the heavy Coronet all the power it needed to win in competitions, catapulting riders around at breakneck speeds. Luckily, they came with padded dashboards and seatbelts. Kit features molded white and clear resin parts with chrome details, a detailed 426 Hemi® engine, soft black tires and authentic Foose Design® decals.

    Overview

    • Skill Level: 2

    • Scale: 1/25

    • Length: 7-7/8"

    • Width: 2-7/8"

    • Height: 2-1/4"

    • Parts: 113

    Price: $19.95 Special Price: $17.96

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '67 Sox & Martin Plymouth]]> http://www.hobbypeople.net/index.php/revell-1-25-sandm-plymouth.html

    Revell 1/25 Sox & Martin '67 Plymouth GTX Plastic Model Kit

    Winner of five NHRA Championships

    Ronnie Sox and Buddy Martin were two racers with some of the highest win totals in drag racing. They toured the country in their modified '67 Plymouth GTX winning races and visiting auto dealerships. In 1968 they won the Winter Nationals and the Spring Nationals while driving the car in this kit. Model is molded in white, transparent red and clear plastic with chrome details. Kit features detailed 426 CID Hemi with two four-barrel carburetors, separate hood scoop, Keystone mag wheels and decals with authentic racing graphics.

    Overview

    • Skill Level: 2

    • Scale: 1/25

    • Length: 8"

    • Width: 3"

    • Height: 2-1/8"

    • Parts: 103

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '68 Dodge Charger 2n1 Special Edition]]> http://www.hobbypeople.net/index.php/revell-1-25-68-dodge-charger-2n1-special-edition.html Revell 1/25 '68 Dodge Charger 2n1 Special Edition Build 1 of 2 plastic models. Optional complete 440 cubic inch or 426 Hemi V8 engines plus a separate engine stand. Detailed interior and chassis to build either stock muscle car vintage drag racer. Authentic factory stock detailing decals and competition graphics. Molded in white, transparent red and clear. Chrome plated parts and black vinyl tires. Illustrated assembly guide.
    • Skill level: 3
    • Scale: 1:25
    • Length: 8-5/16"
    • Parts: 181

    Price: $24.99 Special Price: $22.49

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '68 Dodge Hemi Dart 2n1]]> http://www.hobbypeople.net/index.php/revell-1-25-68-dodge-hemi-dart-2n1.html

    Price: $24.99 Special Price: $22.49

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '68 Firebird]]> http://www.hobbypeople.net/index.php/revell-1-25-68-firebird.html

    Revell 1/25 '68 Pontiac Firebird 400 Ram Air

    Run red hot.

    This Pontiac Firebird is so hot it might just melt every other model off your shelf. Engineers at Pontiac designed a car with a 340 horsepower 6.6L V-8, then added inset hood scoops and extra air intakes on the engine so it would take longer to top out its rpm. Kit features molded white, red and clear resin with chrome detailing and soft black tires. Set also includes a Pontiac 400 c.i. Ram Air engine plus optional race engine parts, interior and authentic design graphics.

    Overview

    • Skill Level: 2

    • Scale: 1/25

    • Length: 7-5/8"

    • Width: 2-15/16"

    • Height: 2-1/16"

    • Parts: 113

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '69 Camaro Convertible]]> http://www.hobbypeople.net/index.php/revell-1-25-69-camaro-convertible.html

    Revell 1/25 '69 Camaro Convertible

    The hottest thing on four wheels.

    1969 was truly a milestone year for the Chevrolet®Camaro®. It was the last year of the first generation Camaro before the all-new models debuted in mid-1970, the last year a Camaro convertible was offered until 1987. Is there any wonder why the 1969 Camaro is so widely celebrated and sought after today? Your Revell kit depicts a highly desirable 1969 Camaro - an SS/RS 396 convertible. The RS option was primarily an appearance package that consisted of special taillights and a unique grille with novel “sport slat” hidden headlights. The fully-detailed 375 horsepower 396 rests beneath a cowl induction hood, and the interior features power windows and a center console with Hurst 4-speed shifter. Additional details include a folded convertible boot, chrome plat-ed rally wheels, front and rear spoilers, and an accurate “chambered” dual exhaust system. The extensive decal sheet features several accurate striping choices in both black and white, hounds-tooth interior pattern decals, and underhood markings. Enjoy building your Revell kit of this all time Camaro classic!

    In the 1960s, it seemed that all of Detroit was competing to have the fastest high-performance vehicle on the market. The 1966 debut of the Camaro gave Chevy serious street cred with the muscle car crowd. For the 1969 model, Chevy replaced the rounded lines of previous Camaros with a far sportier, more aggressive design. Kit features a highly detailed Chevy® 396 V-8 engine, a choice of stock Rally wheels and tires or custom 19" (483 mm) wheels and low-profile tires, countless chrome-plated accessories and authentic factory stock striping decals.

    Features and Specifications

    • Skill level: 2

    • Highly detailed pieces molded in white, transparent red and clear

    • Chrome plated parts and soft black tires

    • Highly detailed 396 Chevy engine

    • Choice of stock Rally Wheels and tires or custom 19" wheels with low profile tires

    • Waterslide decals

    • Illustrated instructions

    • Scale: 1/25

    • Length: 8"

    • Width: 3"

    • Height: 2"

    • Parts: 114

    Price: $22.99 Special Price: $20.69

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '69 Camaro Z/28]]> http://www.hobbypeople.net/index.php/revell-1-25-69-camaro-z-28.html Revell 1/25 '69 Camaro Z/28 The Z/28 was one of the more unusual first-generation Camaro models because it handled corners well besides having tire-melting acceleration. Now as part of the Revell Motor City Muscle series, you get newly-tooled large-diameter chrome wheels on low-profile tires, and all the stock goodies.

    This 1/25-scale model features: Authentic 302 V-8 engine, your choice of stock or Rally Sport front end treatments and the rare dual quad intake and chambered exhaust system.
    • Skill Level 2
    • Scale: 1:25
    • Length: 7-3/4"
    • Width: 2-7/8"
    • Parts: 110+
    Skill Level 2-requires paint and glue (not included).

    Price: $23.49 Special Price: $21.14

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '69 Camaro ZL-1]]> http://www.hobbypeople.net/index.php/revell-1-25-69-camaro-zl-1.html

    Revell 1/25 '69 Camaro ZL-1

    All-American iron

    All through the muscle car era, engines were getting larger and more powerful. Eventually, huge engines became prohibitively expensive and GM® executives put a cap on engine size. At the request of several dealers, the COPO® program was started to get around those restrictions. Dealers could specially order ZL-1s with 427 cu. in. (7.0 L) engines. The upgrade made the ZL-1 very expensive, but for some gearheads the power was worth the price. This kit features a detailed engine, air induction hood and full interior with separate side panels.

    Overview

    • Skill level: 2

    • Scale: 1/25

    • Length: 7-1/4"

    • Width: 2-3/4"

    • Height: 2-1/8"

    • Parts: 105

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '69 Charger Daytona]]> http://www.hobbypeople.net/index.php/revell-1-25-69-charger-daytona.html

    Revell 1/25 '69 Charger Daytona

    Built for speed and performance.

    Dodge built the Charger Daytona with racing in mind. The original Chargers were already muscle cars but the engineers wanted something extra to make the Daytona a race winner. A nose-cap grill-cover made the car more aerodynamic, an added rear wing improved the car's stability and a 440 Magnum engine ramped up its speed capabilities. Molded kit features white, clear and red resin with chrome detailing and soft black tires, detailed 440 Magnum engine, aerodynamic nose with photo-etched grill insert and authentic factory-stock detailing decals.

    Overview

    • Skill Level: 3

    • Scale: 1/25

    • Length: 8-7/8"

    • Width: 3-1/8"

    • Height: 2-3/8"

    • Parts: 149

    Price: $22.99 Special Price: $20.69

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '69 Chevy Nova SS]]> http://www.hobbypeople.net/index.php/revell-1-25-69-chevy-nova-ss.html Revell 1/25 '69 Chevy Nova SS The Nova Super Sport was transformed from a trim option to a performance package for 1968, one of the smallest muscle cars ever fielded by Detroit now included a 295 hp (220 kW) 350 cu in (5.7 L) V8 engine along with a heavy-duty suspension and other performance hardware. Front disc brakes were optional on the 1968 Nova SS.
    • Skill Level: 2
    • Scale: 1:25
    • Length: 7-5/8"
    • Parts: 136
    Features
    • Chevy Nova body accurately molded in white polystyrene plastic.
    • Detailed stock small block 350 engine or optional drag race version.
    • Two hoods stock or racing, plus roll car and traciton bars.
    • Factory rally wheels or drag race wheels with rear slicks.
    • Complete interior detail.
    • Detailed engine.
    • Waterslide decals with colorful racing or stock markings.
    • Illustrated assembly guide.

    Price: $24.99 Special Price: $22.49

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '69 Shelby GT500 Convertible]]> http://www.hobbypeople.net/index.php/revell-1-25-69-shelby-gt500-convertible.html

    Revell 1:25 '69 Shelby GT500 Convertible

    Plastic Model Kit

    This is a Revell 1:25 '69 Shelby GT500 Convertible Plastic Model Kit.

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $22.99 Special Price: $20.69

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '69 Z-28 Camaro RS]]> http://www.hobbypeople.net/index.php/revell-1-25-69-z-28-camaro-rs.html Revell 1/25 '69 Z-28 Camaro RS he '69 was one of the best selling of all the Camaro models over the years. The special Z/28TM package added a unique 302 cubic inch V-8 and other high performance parts to create a blend of good handling as well as powerful acceleration. This Revell kit includes the Rally Sport front end trim and the rare dual quad and chambered exhaust options.
    • Skill Level 2
    • Length: 7-3/4"
    • Width: 2-3/4"
    • Height: 1-3/4"
    • Parts: 113
    Features:
    • Opening cowl induction hood
    • spoilers front and rear
    • waterslide decals.
    Skill Level 2-requires paint and glue (not included).

    Price: $21.99 Special Price: $19.79

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '70 Plymouth Hemi Cuda 2N1]]> http://www.hobbypeople.net/index.php/revell-1-25-70-plymouth-hemi-cuda-2n1-new-tooling.html

    Price: $24.99 Special Price: $22.49

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '90 Mustang LX 5.0 Drag Racer]]> http://www.hobbypeople.net/index.php/revell-1-25-90-mustang-lx-5-0-drag-racer.html

    Revell 1/25 '90 Mustang LX 5.0 Drag Racer

    Plastic Model Kit

    This is Revell 1/25 '90 Mustang LX 5.0 Drag Racer Plastic Model Kit. Sure, racers could throw away extra money on the Mustang GT... but why? The LX coupes were lighter, faster and less expensive-the perfect drag racer. Under the hood on this light and compact car is a customized Windsor "5.0L" V-8. Although technically only 4.9L, nobody complained once they felt the power the Windsor could deliver. Put one of these on a drag line with the right set of tires and it will flat fly. Kit features light tube front suspension, full interior, detailed V-8 with custom injection and full decals.

    Specifications:

    • Skill Level: 3

    • Scale: 1/25

    • Length: 7-1/4 Inches

    • Width: 2-15/16 Inches

    • Height: 2-1/16 Inches

    • Parts: 139

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '92 Mustang LX 5.0 2n1]]> http://www.hobbypeople.net/index.php/revell-1-25-92-mustang-lx-5-0-2n1.html

    Revell 1/25 '90 Mustang LX 5.0 2 'n 1

    A new pony car for the new decade

    Mustangs were some of the most popular cars Ford® produced. Early models raked in sales figures that rivaled the Model A. By the mid-eighties, however, the line was losing ground to stiff competition. The revamped 5.0 model was released in 1987 and quickly became popular because it was cheap and powerful. Those same characteristics made it popular with police departments also and soon Mustangs were both chasers and chased. This kit features a detailed 5.0 liter V-8 engine, quad shock suspension system, police light bar, radio and rear spotlights.

    Overview

    • Skill level: 3

    • Scale: 1/25

    • Length: 7-1/4"

    • Width: 3"

    • Height: 2-3/8"

    • Parts: 131

    Price: $24.99 Special Price: $22.49

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '99 Chevy Silverado Custom PickUp]]> http://www.hobbypeople.net/index.php/revell-1-25-99-chevy-silverado-custom-pickup.html Revell 1/25 '99 Chevy Silverado Custom PickUp The Chevy Silverado has always been one of the best looking pickups on the road. But add some radical body mods like sculptured front grille, air dam with fog lights, wild hood scoop, custom rear roll pan, drop it down to a super low stance and add huge custom wheels, and you've got the cutting edge of sport truck styling!
    • 8-7/8" long
    • 127 pieces
    • Molded in white plastic
    • Includes decals
    • Skill Level 2, ages 10+

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 '99 Mustang SVT Cobra]]> http://www.hobbypeople.net/index.php/revell-1-25-99-mustang-svt-cobra.html

    Revell 1/25 '99 Mustang SVT Cobra

    Designed for the new millennium

    Mustang completely rebuilt their line in '94, but the approaching new millennium demanded many more changes. The '99 had sleeker lines, the fuel system was more environmentally-friendly and it was the first Mustang with an independent rear suspension system. The '99 kept the 1994's 4.6-liter DOHC V-8 engine and tuned it to produce 320 horsepower. Kit features parts molded in white, red and clear resin with chrome details, detailed 4.6-liter DOHC V-8, detailed rear suspension, separate rear spoiler, factory stock decals and soft black tires.

    Overview

    • Skill level: 2

    • Scale: 1/25

    • Length: 7-5/16"

    • Width: 3-1/8"

    • Height: 2-1/8"

    • Parts: 107

    Price: $19.99 Special Price: $17.99

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 2013 Camaro ZL1]]> http://www.hobbypeople.net/index.php/revell-1-25-2013-camaro-zl1.html

    Revell 1/25 2013 Chevy Camaro ZL1

    Plastic Model Kit

    This is a Revell 1/25 2013 Chevy Camaro ZL1 Plastic Model Kit. This kit features highly detailed molded plastic parts and includes a fully detailed 6.2 litre engine and metal axles.

    Features:

    • Highly Detailed Molded Plastic Parts

    • Fully Detailed 6.2 Liter Engine

    • Metal Axles

    Specifications:

    • Skill Level: 3

    • Scale: 1/25

    • Length: 7-1/2 Inches

    • Width: 3-1/4 Inches

    • Height: 2-1/8 Inches

    • Parts: 48

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $19.95 Special Price: $17.96

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 2013 Challenger SRT8]]> http://www.hobbypeople.net/index.php/revell-1-25-2013-challenger-srt8.html

    Revell 1/25 2013 Dodge Challenger SRT8

    Plastic Model Kit

    This is a Revell 1/25 2013 Dodge Challenger SRT8 Plastic Model Kit. Kit features highly detailed molded plastic parts. Includes fully detailed 6.4 litre engine and metal axles.

    Features:

    • Highly Detailed Molded Plastic Parts

    • Fully Detailed 6.4 Liter Engine

    • Metal Axles

    Specifications:

    • Skill Level: 3

    • Scale: 1/25

    • Length: 7-7/8 Inches

    • Width: 3-1/4 Inches

    • Height: 2-5/16 Inches

    • Parts: 44

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $19.95 Special Price: $17.96

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 2015 Mustang GT Snap]]> http://www.hobbypeople.net/index.php/revell-1-25-2015-mustang-gt-snap.html

    Revell 1/25 2015 Ford Mustang GT

    Snap-Together Plastic Model Kit

    This is a Revell 1/25 2015 Ford Mustang GT Snap-Together Plastic Model Kit. This kit features snap together assembly, so no glue is required. Parts are precolored, so no painting is required. Includes illustrated instructions.

    Features:

    • Easy Snap Together Assembly

    • No Painting or Gluing Required

    • Detailed Parts

    • Rolling Wheels

    • Illustrated instructions

    Specifications:

    • Scale: 1/25

    • Length: 7-1/2"

    • Width: 3"

    • Height: 2-3/16"

    • Skill Level: 1

    • Parts: 12

    Price: $12.95 Special Price: $11.66

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 67 Camaro SS 2n1]]> http://www.hobbypeople.net/index.php/revell-1-25-67-camaro-ss-2n1.html

    Revell 1/25 '67 Camaro SS

    2n1 Plastic Model Kit

    This is a Revell 1/25 '67 Camaro SS 2n1 Plastic Model Kit. This kit features detailed plastic parts molded in white, transparent red and clear. Includes chrome plated parts, soft vinyl tires, detailed engine with optional dual exhaust, one set of stock wheels, one set of racing wheels, detailed interior roll bar and separate back seat.

    Features:

    • Highly Detailed Plastic Parts Molded in White, Transparent Red and Clear

    • Includes Chrome Plated Parts and Soft Black Tires

    • Detailed 396 Engine with Optional Dual Exhaust

    • Includes Stock and Racing Wheels

    • Detailed Racing Interior Roll Bar and Separate Back Seat

    • Waterslide Decals

    Specifications:

    • Skill Level: 3

    • Scale: 1/25

    • Length: 7-5/16 Inches

    • Width: 2-15/16 Inches

    • Height: 1-3/4 Inches

    • Parts: 130

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $25.99 Special Price: $23.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 70 Ford Torino GT 2n1]]> http://www.hobbypeople.net/index.php/revell-1-25-70-ford-torino-gt-2n1.html

    Revell 1/25 '70 Ford Torino GT

    2n1 Plastic Model Kit

    This is a Revell 1/25 '70 Ford Torino GT 2n1 Plastic Model Kit. This kit features detailed plastic parts molded in white, transparent red and clear. Includes chrome plated parts, soft black tires, photo-etched metal parts, drag racing engine and interior, and two different wheel styles.

    Features:

    • Highly Detailed Plastic Parts Molded in White, Transparent Red and Clear

    • Includes Chrome Plated Parts and Soft Black Tires

    • Features Photo-Etched Metal Detail Parts

    • Includes Drag Racing Engine and Interior Parts

    • Included Two Different Styles of Wheels

    • Waterslide Decals

    Specifications:

    • Skill Level: 3

    • Scale: 1/25

    • Length: 8-1/4 Inches

    • Width: 3-1/8 Inches

    • Height: 2-3/16 Inches

    • Parts: 139

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $22.99 Special Price: $20.69

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Alternomad Caprice]]> http://www.hobbypeople.net/index.php/revell-1-25-alternomad-caprice.html

    Revell 1/25 Alternomad Caprice

    Thom Taylor's wonder wagon

    Turning a station wagon into something people would actually want to drive isn't easy in this day and age, but Thom Taylor pulled it off. His Alternomad Caprice is based on the V-8 powered Caprice with a stretched body, improved paint scheme and optionally deleted rear windows. It's a ride you'd be happy to be caught ridin' low in. This kit features parts molded in white, transparent red, and clear plus optional clear or solid side panels, opening hood with full 5.7L V-8 and rear-wheel drive suspension.

    Overview

    • Skill level: 2

    • Scale: 1/25

    • Length: 8-3/4"

    • Width: 3-1/8"

    • Height: 2-1/8"

    • Parts: 72

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Audi R8 Snap]]> http://www.hobbypeople.net/index.php/revell-1-25-audi-r8-snap.html

    Revell 1/25 Audi R8

    Snap-Together Plastic Model Kit

    This is a Revell 1/25 Audi R8 Snap-Together Plastic Model Kit. This kit features snap together assembly, so no glue is required. Parts are precolored, so no painting is required. Includes illustrated instructions.

    Features:

    • Easy Snap Together Assembly

    • No Painting or Gluing Required

    • Detailed Parts

    • Rolling Wheels

    • Illustrated instructions

    Specifications:

    • Scale: 1/25

    • Length: 7-1/4"

    • Skill Level: 1

    • Parts: 13

    Price: $12.95 Special Price: $11.66

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Camaro Concept Car SnapTite]]> http://www.hobbypeople.net/index.php/revell-1-25-camaro-concept-car-snaptite.html Revell 1/25 Camaro Concept Car SnapTite When Chevrolet ended production of the Camaro at the end of the 2002 model year the rumors of a new model started to fly. Chevrolet answered those rumors at the 2006 Detroit Auto Show with this great looking sport coupe. While thoroughly modern, many of the design cues were taken from the legendary 1969 Camaro, making this a true crowd pleaser.
    • Skill Level: 1
    • Scale: 1:25
    • Length: 7-3/8"
    • Parts: 39
    This is a SnapTite model that does not require paint or glue. Skill Level 1.

    Price: $15.99 Special Price: $14.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Chevy Impala Police Car]]> http://www.hobbypeople.net/index.php/revell-1-25-chevy-impala-police-car.html Revell 1/25 Chevy Impala Police Car Over the years, the ImpalaTM has always been a vehicle thats been all things to all people. Whether that meant running the kids off to school, or a police officer running a suspect into the station, the Impala is one of Americas favorite choices in cars. Since this is one of the members of our Wheels of FireTM SnapTite line, you can snap together a good looking replica without paint or glue. Features: Newly tooled body, interior and chassis, police and public service features and colorful decals.
    • Skill Level 1
    • Scale: 1:25
    • Length: 8-1/4"
    • Parts: 40+
    Features
    • Accurately detailed bodywork molded in durable white polystyrene
    • Snap-together assembly
    • Authentic police equipment and highly detailed one-piece body and multi-piece interior
    • Rolling wheels
    • Treaded vinyl tires
    • Metal axles
    • Peel 'n stick graphic decals
    • Illustrated assembly guide

    Price: $15.99 Special Price: $14.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Chevy SSR]]> http://www.hobbypeople.net/index.php/revell-1-25-chevy-ssr.html

    Revell 1/25 Chevy SSR

    A sporty and sleek convertible pickup that will never let you down

    The Chevy SSR is a unique vehicle that combines all the best elements of a muscle car, a convertible and a pickup into one seriously sweet ride. When the first model year came out it was a high-performance thrill with heavy-hauling capability, but GM didn't stop there. Throughout the line's three-year run, the SSR's V-8 engine, drivetrain and appearance were continuously improved. After three years, the floundering car market caused the cancellation of the line. This kit features a retractable roof, detailed V-8 engine and separate bed cover.

    Overview

    • Skill Level: 2

    • Scale: 1/25

    • Length: 7-3/4"

    • Width: 3-1/8"

    • Height: 2-3/8"

    • Parts: 105

    Price: $19.95 Special Price: $17.96

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Dodge Viper RT/10]]> http://www.hobbypeople.net/index.php/revell-1-25-dodge-viper-rt-10.html

    Revell 1/25 Dodge Viper RT/10

    Putting the engine first.

    A 400 horsepower aluminum-alloy V-10 engine shoots from 0 to 60 mph (0 to 97 km/h) in 4.6 seconds, with a 164 mph (264 km) top speed - that is power. When Chrysler® built the first RT/10 Vipers they left out all the superfluous items most cars carry, like windows and roofs, and focused on what was important, the engine. This scale model kit features the original Vipers in red, white, and transparent resin with chrome detailing. The model brings detail to life with brakes, suspension, side exhaust and factory detailing decals.

    Overview

    • Skill level: 2

    • Scale: 1/25

    • Length: 7"

    • Width: 3-1/4"

    • Height: 1-7/8"

    • Parts: 78

    Price: $19.99 Special Price: $17.99

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Dodge Viper SRT10 ACR]]> http://www.hobbypeople.net/index.php/revell-1-25-dodge-viper-srt10-acr.html

    The Dodge Viper SRT10 ACR (American Club Racer) is a Viper built for the hard core enthusiast. The ACR is equipped with a V-10 engine and six speed manual transmission plus an extensive aerodynamic package. This Viper is street-legal but drives and handles like a race car. Opening trunk and hood with a detailed interior and a 600 bhp V-10 engine. Front splitter, fixed front dive planes, rear wing and lightweight racing style wheels. Decals with authentic factory graphics and carbon fiber panels. Molded in white, transparent red and clear with chrome plated parts and soft black tires.

    • Skill Level 2
    • Scale: 1/25
    • Length: 7-1/8"
    • Parts: 107

    Price: $24.99 Special Price: $22.49

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Ed Roth Tweedy Pie]]> http://www.hobbypeople.net/index.php/revell-1-25-ed-roth-tweedy-pie.html

    Revell 1/25 Ed Roth Tweedy Pie

    The tough, timeless classic custom.

    Ed Roth’s Tweedy Pie is one of the toughest little customs ever to emerge from the mind of the Big Daddy! It’s the quintessential Ford T roadster hot rod that shook the car world when it debuted over 50 years ago. “Tweedy Pie” has the distinction of capturing the Best of Show Award at the first Disneyland Car Show in1958. The “Tweedy Pie” is a roadster De Luxe with a 90 inch wheel base and has a ’23 “T” body mounted on ’32 Ford rails and a handmade gas tank. This roadster is the typical example of the “Classic” hot rod.

    The Tweedy Pie made its debut over half a century ago. To pull off this eye-popping purple hot rod, Ed "Big Daddy" Roth used an old-school Ford® Model "T" chassis. The end result won "Best in Show" at Disneyland's® first car show in 1958. It remains one of Roth's most inspired creations! Kit features a choice of roadster and pickup bodies, optional custom front-end treatments, optional cycle fenders, soft black tires, chrome-plated parts and waterslide decals with contemporary custom pin stripe graphics.

    Features and Specifications

    • Skill Level: 3

    • Highly detailed pieces molded in white

    • Chrome plated parts and soft black tires

    • Optional custom front-end treatments plus cycle fenders and roadster or pickup body

    • Waterslide decals with contemporary custom pin stripe graphics

    • Illustrated instructions

    • Scale: 1/25

    • Length: 4-7/16"

    • Width: 2-3/4"

    • Height: 2-3/4"

    • Parts: 160

    Price: $22.89 Special Price: $20.60

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Ford Police Expedition]]> http://www.hobbypeople.net/index.php/revell-1-25-ford-police-expedition.html

    Revell 1/25 SnapTite Ford Expedtion Police SSV Plastic Model Kit

    Say hello to the bust bus

    All real-leather seats, air conditioning and the smoothest suspension around; yeah the Expedition is the perfect way to go... to jail. For some law enforcement agencies in the U.S., load and passenger capacity are more important than speed. The Ford Expedition Special Service Vehicle (SSV) is perfect for those agencies. Its reliability, towing capacity, and passenger capacity are especially useful to the Border Patrol. This kit features an easy to assemble screw on chassis, a painted roof light bar, interior security screens and storage compartments.

    Overview

    • Skill Level: 1

    • Scale: 1/25

    • Length: 8-1/4"

    • Width: 3-1/2"

    • Height: 3-1/4"

    • Parts: 46

    Price: $15.99 Special Price: $14.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Ford Raptor Pickup]]> http://www.hobbypeople.net/index.php/revell-1-25-ford-raptor-pickup.html

    Revell 1/25 Ford Raptor Pickup

    Snap-Together Plastic Model Kit

    This is a Revell 1/25 Ford Raptor Pickup Snap-Together Plastic Model Kit. This snap-together kit doesn't require glue or paint. Includes detailed plastic parts molded in red, black, transparent red and clear. Features chrome plated parts, soft black tires, detailed suspension and disc brakes, and full interior detail, including a sunroof.

    Features:

    • Easy Snap-Together Assembly - No Glue or Paint Required

    • Detailed Plastic Parts Molded in Red, Black, Transparent Red and Clear

    • Includes Chrome Plated Parts and Soft Black Tires

    • Detailed Suspension and Disc Brakes

    • Full Interior Detail, Sunroof and Separate Pickup Bed

    Specifications:

    • Skill Level: 1

    • Scale: 1/25

    • Length: 8-3/4 Inches

    • Width: 3-15/16 Inches

    • Height: 3-1/16 Inches

    • Parts: 48

    Price: $15.95 Special Price: $14.36

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Grave Digger Monster Truck]]> http://www.hobbypeople.net/index.php/revell-1-25-grave-digger-monster-truck.html

    Revell 1/25 Snaptite Grave Digger Monster Truck

    Burying the competition

    Over thirty years after Dennis Anderson built the first Grave Digger, nine of these super-tough crowd-pleasing vehicles are being driven at Monster Jam" events around the country. An aggressive driving style, coupled with the intimidating appearance of Grave Digger made Anderson and his team instant hits in the monster truck circuit. This replica has all the show-stopping looks of the original in an easy-to-assemble SnapTite" kit. This kit features easy snap-together construction, 3 inch monster tires, full engine and drivetrain and colorful peel and stick decals.

    Overview

    • Skill Level: 1

    • Scale: 1/25

    • Length: 8-1/4"

    • Width: 5-3/4"

    • Height: 5-1/8"

    • Parts: 35

    Price: $15.99 Special Price: $14.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Hot Rod Hydro]]> http://www.hobbypeople.net/index.php/revell-1-25-hot-rod-hydro.html

    Revell 1/25 Hot Rod Hydro

    Plastic Model Kit

    This is a Revell 1/25 Hot Rod Hydro Plastic Model Kit. This kit features detailed plastic parts molded in white. Includes chrome plated parts, detailed big-block V-8 engine, full interior and drive line. Includes boat trailer with soft black tires and water skis for added detail.

    Features:

    • Highly Detailed Plastic Parts Molded in White with Chrome Plated Parts

    • Detailed Big-Block V-8 Engine

    • Full Interior and Drive Line

    • Includes Boat Trailer with Soft Black Tires and Water Skis

    • Waterslide Decals

    Specifications:

    • Skill Level: 2

    • Scale: 1/25

    • Length: 8-13/16 Inches

    • Width: 3-1/2 Inches

    • Height: 2-1/2 Inches

    • Parts: 120

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $24.99 Special Price: $22.49

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Humvee]]> http://www.hobbypeople.net/index.php/revell-1-25-humvee.html

    Revell 1/25 SnapTite Humvee

    Snap together another Humvee for the U.S. Army today!

    Highly mobile and extremely versatile, the Humvee is a powerful asset in the U.S. Army's arsenal. Originally, Humvees were designed to replace the Jeeps of WWII and Vietnam with a more reliable, purpose-built military vehicle. As the tactics of America's opponents have changed, so has the Humvee. Recently, many have been modified with armor and heavy weapons, such as the TOW missile launcher on this kit. This SnapTite kit features screw-on chassis, rolling wheels with metal axles and peel and stick decals with colorful graphics.

    Overview

    • Skill Level: 1

    • Scale: 1/25

    • Length: 7-1/2"

    • Width: 3-1/2"

    • Height: 4-1/2"

    • Parts: 35

    Price: $16.99 Special Price: $15.29

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Jeep Rubicon]]> http://www.hobbypeople.net/index.php/revell-1-25-jeep-rubicon.html

    Revell 1/25 Jeep Wrangler Rubicon

    Crossing all boundaries

    The Jeep Wrangler® Rubicon is one of the most impressive all-terrain vehicles on the market. It is four-wheel-drive, has powerful Dana 44 axles and comes with a choice of exceptional four and six cylinder engines. Even the name Rubicon evokes thoughts of tough obstacles conquered. These Jeeps are modeled off the WWII workhorse; they have kept the same aggressive all-terrain capability, good handling and titanic towing capacity as their predecessors. This kit features a roll over bar with detail lights, working spring suspension and large off-road tires.

    Overview

    • Skill Level: 2

    • Scale: 1/25

    • Length: 6-3/4"

    • Width: 3-1/8"

    • Height: 3-1/4"

    • Parts: 91

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Jungle Jim Rail Dragster]]> http://www.hobbypeople.net/index.php/revell-1-25-jungle-jim-rail-dragster.html

    Revell 1/25 Jungle Jim Rail Dragster

    Plastic Model Kit

    This is a Revell 1/25 Jungle Jim Rail Dragster Plastic Model Kit. This assembly kit features detailed plastic parts molded in white and clear. Includes chrome-plated parts and soft black tires. Features highly-detailed rail dragster frame and suspension with high-mounted rear wing and parachute pack. Includes standing driver figure.

    Features:

    • Highly Detailed Plastic Parts Molded in White and Clear with Chrome Plated Parts

    • Soft Black Tires

    • Highly-Detailed Rail Frame and Suspension

    • High-Mounted Rear Wing and Parachute Pack

    • Includes Standing Driver Figure

    • Waterslide Decals

    Specifications:

    • Skill Level: 3

    • Scale: 1/25

    • Length:10-5/16 Inches (262.0mm)

    • Width: 2-1/8 Inches (54.0mm)

    • Height: 2-3/16 Inches (55.6mm)

    • Parts: 119

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Jungle Jim Vega NHRA Funny Car]]> http://www.hobbypeople.net/index.php/revell-1-25-jungle-jim-vega-nhra-funny-car.html

     

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 K.S Pittman Willys Drag Coupe]]> http://www.hobbypeople.net/index.php/revell-1-25-k-s-pittman-willys-drag-coupe.html

     

    Revell 1/25 K.S Pittman Willys Drag Coupe

    In the 1960s drag racing had what is commonly known as the “Gasser Wars”. The Gasser class was ruled by the Willys Coupe and competitors like K.S. Pittman. He was one of the first to earn a living in match racing from coast to coast. With victories in the prestigious Nationals K.S. Pittman also set records for gas powered drag coupes. Your typical Gasser in the 1960s was a 41 Willys coupe with a big block Hemi motor. This is the car K.S. Pittman set the record for the quarter mile in under 8 seconds fueled with just gasoline. His Willys had the popular straight axle in the front which helped to weight transfer to the rear. The Gassers were the forerunners of the Funny Cars which were very popular with the fans.

    Features and Specifications

    • Skill level: 2

    • Scale: 1/25

    • Length: 7"

    • Width: 3"

    • Height: 2-3/4"

    • Parts: 94

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Kenworth W900]]> http://www.hobbypeople.net/index.php/revell-1-25-kenworth-w900.html Revell 1/25 Kenworth W900 The imposing Kenworth W900 has everything that long-haul truckers need to get the job done. This impressive Kenworth design sports a dual sleeper capped with an aerodynamic roofline which tells everyone who sees it that it is a road machine without equal. Hood tilts forward to show detailed turbocharged six cylinder diesel engine. Chrome plated simulated alloy wheels, dual exhaust stacks, roof mounted horns and mirrors with antennas. Decals with optional stripes or custom graphics, Kenworth markings and license plates. Molded in white and clear with chrome plated parts and soft black tires.
    • Scale: 1:25
    • Length: 12-5/8"
    • Parts: 115

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Peterbuilt 359 Conventional]]> http://www.hobbypeople.net/index.php/revell-1-25-peterbuilt-359-conventional.html

    Revell 1/25 Peterbuilt 359 Conventional The Peterbilt 359 model was first introduced in 1967 and carries the long, wide hood synonymous with big American 18-wheelers. They remain a common sight on the nations highways as they pull trailers and flatbeds loaded with anything and everything you can think of.

    • Scale: 1:25
    • Length: 11-7/8"
    • Width: 3-3/4"

    Features an extended sleeper cab, authentic engine detail, and extensive chassis features.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Rat Fink w/Diorama]]> http://www.hobbypeople.net/index.php/revell-1-25-rat-fink-w-diorama.html

    Revell 1:25 Rat Fink w/Diorama

    Plastic Model Kit

    This is a Revell 1:25 Rat Fink w/Diorama Plastic Model Kit. Ed "Big Daddy" Roth was a spokesman for Revell in the 1960s and created some famous characters such as Rat Fink. Ed had a shop just like this one. Features precut 1:25 scale cardboard Ed Roth sign and garage.

    Specifications:

    • Scale: 1:25

    • Skill Level: 2

    • Length: 4.5 Inches (114.3mm)

    • Width: 3.0 Inches (76.2mm)

    • Height: 6.0 Inches (152.4mm)

    • Parts: 9

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 S&B '77 Pontiac Firebird]]> http://www.hobbypeople.net/index.php/revell-1-25-s-b-77-pontiac-firebird.html

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Slingster Dragster]]> http://www.hobbypeople.net/index.php/revell-1-25-slingster-dragster.html

    Revell 1:25 Slingster Dragster

    Plastic Model Kit

    This is a Revell 1:25 Slingster Dragster Plastic Model Kit.

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Sox & Martin 70 Plymouth Hemi Cuda]]> http://www.hobbypeople.net/index.php/revell-1-25-sox-martin-70-plymouth-hemi-cuda.html

    Revell 1/25 Sox & Martin '70 Plymouth HEMI® Cuda Plastic Model Kit

    Sox & Martin were the best driving team of the seventies. Their red-white and blue racers were legendary then and are a recognized icon of the motorsports industry even today. By far their greatest achievement came with their HEMI Cuda. Production models of these vehicles are some of the fastest things on the road. But with modifications by Martin and Ronnie Sox behind the wheel, the Cuda was nearly unbeatable. Kit features drag slicks, racing suspension, 426 HEMI engine, roll bar, hood scoop and decals.

    Specifications

    • Skill Level: 3
    • Scale: 1/25
    • Length: 7-3/16"
    • Width: 3-1/16"
    • Height: 2-1/4"
    • Parts: 148

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Stacey David's Rat Roaster]]> http://www.hobbypeople.net/index.php/revell-1-25-stacey-david-s-rat-roaster.html

    Revell 1/25 Stacey David's Rat Roaster

    Lay down some rubber with this custom classic

    When Stacey David, host of Speed TV's "GearZ®", soups up a car, it becomes one mean machine. This car is a late '60s-style hot rod with so many mods you can hardly tell what the original ride was. David's elbow grease and innovation turned this car into a full-throttle thrill ride with a front-end moon tank and a Weiand® 250 blower. This kit features a choice of 2 carburetor intakes, a replica Rat Roaster guitar, optional front fenders and Stacey David design decals.

    Overview

    • Skill Level: 2

    • Scale: 1/25

    • Length: 6-3/4"

    • Width: 2-3/4"

    • Height: 2-1/8"

    • Parts: 148

    Price: $23.99 Special Price: $21.59

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/25 Willys Street Rod]]> http://www.hobbypeople.net/index.php/revell-1-25-willys-street-rod.html

    Revell 1/25 Willys Street Rod

    Authentic "Americar" hot rods

    Because it was produced for less than five years and spare parts were scarce, Willys Americars became one of the most frequently modified cars in the U.S. Many hot rod enthusiasts began to improve upon the simple, light and cheap cars and soon Willys became the most popular hot rods around. The classic Willys street rod had a blown Hemi" engine and enlarged rear tires. This kit features a full street rod suspension and movable front wheel plus a detailed Hemi engine, modern interior and colorful hot rod decals.

    Overview

    • Skill Level: 2

    • Scale: 1/25

    • Length: 6-1/2"

    • Width: 2-3/4"

    • Height: 2-1/2"

    • Parts: 100

    Price: $22.99 Special Price: $20.69

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/250 Space Shuttle Snaptite]]> http://www.hobbypeople.net/index.php/revell-1-250-space-shuttle-snaptite.html

    Revell 1:250 Space Shuttle Snap-Tite

    Plastic Model Kit

    This is a Revell 1:250 Space Shuttle Snap-Tite Plastic Model Kit. This Snap-Tite kit features snap together assembly, so no glue is required. Parts are precolored, so no painting is required. Includes illustrated instructions.

    Features:

    • Easy Snap Together Assembly

    • No Painting or Gluing Required

    • Detailed Parts

    • Illustrated instructions

    Specifications:

    • Scale: 1:250

    • Skill Level: 1

    • Wingspan: 3-1/2 Inches (88.9mm)

    • Length: 5-1/4 Inches (133.5mm)

    • Height: 2-1/2 Inches (63.5mm)

    • Parts: 21

    Price: $11.95 Special Price: $10.76

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/28 Fokker DR.1 Richthofen]]> http://www.hobbypeople.net/index.php/revell-1-28-fokker-dr-1-richthofen.html

    Revell 1/28 Fokker DR.1 Richthofen Manfred von Richthofen (A.K.A. "The Red Baron") made history in the Great War with his red Fokker triplane. Introduced in June 1917, it was the most maneuverable aircraft and achieved high climbing speeds.

    • Length: 8-1/4" (21.1cm)
    • Wingspan: 10-1/4" (26.2cm)
    • Scale: 1/28

    Features

    • Skill level 3 includes up to 100 red plastic pieces molded to sprue trees.
    • Detailed radial engine.
    • Movable propeller.
    • Detailed cockpit with control column, seat and pedals.
    • Structurally detailed wings.
    • Two Spandau MGs.
    • Landing gear with movable wheels.
    • Pilot figure von Richtrhofen.
    • Two ground personnel figures.
    • Wings are three-tier.
    • There is no cockpit enclosure.
    • Waterslide decals included.
    • Detailed pictorial instructions.

    Price: $21.99 Special Price: $19.79

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/32 '70 Mustang Mach I SnapTite]]> http://www.hobbypeople.net/index.php/revell-1-32-70-mustang-mach-i-blstr.html

    Revell 1/32 '70 Mustang Mach I SnapTite

    300 horsepower V8 engine, shaker air scoop, sport bucket seats, dual exhaust pipes, competition suspension, all-black paint job, fastback body, custom racing stripes and running Mustang logo. Need anything else? How about quick snap glue-less construction of your dream car? Yeah, its got that too.

    Overview

    • Skill Level: 1

    • Scale: 1/32

    • Length: 5-3/4"

    • Width: 2-1/4"

    • Height: 1-5/8"

    • Parts: 20

    Price: $13.49 Special Price: $12.14

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/32 '78 Corvette Sport Coupe SnapTite]]> http://www.hobbypeople.net/index.php/revell-1-32-corvette-sport-coupe-blstr.html

    Revell 1/32 '78 Corvette Sport Coupe SnapTite

    Snap together your own super sporty and sophisticated ’78 Corvette. Aerodynamic front ends and fastback rear sections reduce drag, allowing this car’s 220 horsepower engine to power it from 0 to 60 mph (0 to 96.5 kmh) in 6.6 seconds. Model comes pre-painted with an eagle and flag motif.

    Overview

    • Skill Level: 1

    • Scale: 1/32

    • Length: 5-3/4"

    • Width: 2-1/4"

    • Height: 1-9/16"

    • Parts: 24

    Price: $13.49 Special Price: $12.14

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/32 Bell X-1 Experimental Aircraft]]> http://www.hobbypeople.net/index.php/revell-1-32-bell-x-1-experimental-aircraft.html

    Revell 1:32 Bell X-1

    Plastic Model Kit

    This is a Revell 1:32 Bell X-1 Plastic Model Kit. Test pilot Chuck Yeager broke the sound barrier on October 14, 1947. This remarkable feat was made possible by the Bell X-1, an experimental supersonic aircraft which was introduced the previous year. Spanning only 28 feet (8.5 m) and measuring 31 feet (9.4 m) in length, the X-1's impact on the future of air and space travel proved immeasurable. Kit features a fully detailed cockpit with an optional pilot figure, an optional rocket engine, an opening cockpit door and decals with authentic markings for four versions.

    Features and Specifications:

    • Skill Level: 2

    • Scale: 1:32

    • Length: 12-3/4"

    • Wingspan: 10-5/8"

    • Parts: 50

    • Molded Styrene - Requires Painting

    • Fully-Detailed Cockpit

    • Optional Pilot Figure

    • Optional Rocket Engine

    • Opening Cockpit Door

    • Waterslide Decals with Authentic Markings for Four Different Versions

    *This is an unpainted plastic model kit. Kit requires assembly and painting. Modeling tools, adhesives and paint required (available separately).

    Price: $21.99 Special Price: $19.79

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/32 Junkers Ju-88A-1 Stuka Bomber]]> http://www.hobbypeople.net/index.php/revell-1-32-junkers-ju-88a-1-stuka-bomber.html

    Revell 1:32 Junkers Ju88A-1 Bomber

    Plastic Model Kit

    This is a Revell 1:32 Junkers Ju88A-1 Bomber Plastic Model Kit. Powered by 1,200 hp (895 kW) Jumo 211B-1 engines, the Junkers Ju88A-1 was intimidating on the ground and in the air. Employed as a bomber or fighter, the Ju88 was sure to hit its targets.

    Kit features surface details with recessed panel lines, separate ailerons and flaps, a super-detailed cockpit with side walls, a bomb sight, wireless equipment and instrument panels, rotating props with detailed engine cowls and decals for two versions: 7./Kampfgeschwader 54 France, September 1940, Battle of Britain and Geschwaderstab KG 30, Westerland/Sylt. 1939.

    Features and Specifications:

    • Skill Level: 3

    • Scale: 1:32

    • Wingspan: 22-1/2"

    • Length: 17-7/8"

    • Height: 5-1/4"

    • Parts: 281

    • Highly Detailed Plastic Parts

    • Separate Ailerons and Flaps

    • Super-Detailed Cockpit

    • Rotating Props with Detailed Engine Cowls

    • Decals for Two Versions - "7./Kampfgeschwader 54 France" and "Geschwaderstab KG 30"

    • Illustrated Assembly Guide

    *This is an unassembled plastic model kit. Assembly and painting required. Paint and model assembly tools available separately.

    Price: $44.99 Special Price: $40.49

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/32 Mack Fire Pumper SnapTite]]> http://www.hobbypeople.net/index.php/revell-1-32-mack-fire-pumper-snaptite.html

    Revell 1/32 Mack Fire Pumper SnapTite Chassis and interior are super detailed with hose reels, sirens, emergency lights and pump control panel. Optional cab-mounted water cannon that turns, or flood lights plusremovable ladders. Colorful Peel 'n Stick graphics. Molded in red, black and clear with chrome plated parts. Waterslide decals. Illustrated assembly guide.

    • Skill Level: 1
    • Scale: 1:32
    • Length: 9-7/8"
    • Parts: 74

    This is a SnapTite model that does not require paint or glue. Skill Level 1.

    Price: $15.99 Special Price: $14.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/32 Panzer IV]]> http://www.hobbypeople.net/index.php/revell-1-32-panzer-iv.html

    Revell 1/32 Panzer IV Tank

    Plastic Model Kit

    This is a Revell 1/32 Panzer IV Tank Plastic Model Kit. In all its wars, Germany excelled at maneuver warfare. However, it wasn't until the invention of the reliable, quick, and extremely powerful Panzer IV that the German Panzer Corps really waged a blitzkrieg. Upgrades to the armor and armament of the Panzer IV took the tank from an infantry support role and made it a powerful weapon for confronting nearly any enemy. In the end, simple numbers defeated superior design. The number of Shermans and T-34s produced was ten times that of Panzer IVs. Kit features extra equipment and two crew members.

    Features:

    • Highly Detailed Molded Plastic Parts Molded in Olive Drab and Black Vinyl

    • Includes Extra Tread Links and Equipment

    • Includes Two Crew Members

    • Includes Optional Armor Skirts and Turret Ring

    • Separate Hatch Covers

    • Waterslide Decals

    Specifications:

    • Skill Level: 2

    • Scale: 1/32

    • Length: 8-5/8 Inches

    • Width: 3-7/8 Inches

    • Height: 3-1/8 Inches

    • Parts: 197

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $21.99 Special Price: $19.79

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/35 Abrams M1A1]]> http://www.hobbypeople.net/index.php/revell-1-35-abrams-m1a1.html

    Revell 1/35 Abrams M1A1 SnapTite Kit

    Original heavy hitters

    The M1 was a good tank, but the M1A1 improved on it with survivability features like NBC protection and blowout panels for ammo lockers. It also added the heavy-hitting power of the Rheinmetall 120mm smoothbore gun. These guns, loaded with depleted-uranium shells, proved extraordinarily lethal to the tanks of the Iraqi Army. Now you can build America's toughest tank in a 'snap'! Snaptite kits are perfect for introducing new modelers to the hobby and history. This kit features glue less, snap-together construction, pre-painted polystyrene parts and illustrated instructions.

    Overview

    • Skill Level: 1

    • Scale: 1/35

    • Length: 11"

    • Width: 4"

    • Height: 3-1/4"

    • Parts: 58

    Price: $15.99 Special Price: $14.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/35 Bell H-13H 2N1]]> http://www.hobbypeople.net/index.php/revell-1-35-bell-h-13h-2n1.html

    Made for M.A.S.H. missions.

    The single-engine Bell H-13H was developed in the mid-1940s for the U.S. military. Popular throughout the Korean War, this heli was often equipped with Medevac panniers on each skid and an acrylic shield to protect potential patients. Kit features a detailed six-cylinder Lycoming engine, a single-piece bubble canopy, a pilot figure, the choice of a Medevac version with two litters for wounded patients or a gunship version with two machine guns and six rocket tubes, plus decals for four different helicopters: Medevac, gunship, test bed or transport.

    Overview

    • Skill Level 2

    • Scale: 1/35

    • Length: 10-5/8"

    • Parts: 79

    Price: $16.99 Special Price: $15.29

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/35 M48 A2 Patton Tank]]> http://www.hobbypeople.net/index.php/revell-1-35-m48-a2-patton-tank.html

    The M48A2 Patton tank was named for General George S. Patton, famous tank commander of World War II. It is a heavily armored, full-tracklaying combat vehicle with a 90 mm gun, a .30 cal. machine gun in combination mount and a .50 cal. machine gun in the commander's cupola. Opening and closing hatches, movable turret, cannon, machine gun and tank treads. Two crew members and six military figures. Decals with optional markings. Molded in olive drab with soft black treads.

    • Skill level: 2
    • Scale: 1/35
    • Length: 9-7/8"
    • Parts: 152

    Price: $22.99 Special Price: $20.69

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/4 Visible V-8]]> http://www.hobbypeople.net/index.php/revell-1-4-visible-v-8.html

    Revell 1/4 Visible V-8

    Plastic Model Kit

    This is a Revell 1/4 Visible V-8 Plastic Model Kit. The Revell 1/4 Scale Visible V-8 kit is an engineering achievement and simulates the workings of the real thing! This is a great educational building project for the family or individual who wants to enjoy the wonders of plastic modeling. Enjoy hours of fun during assembly, and when you are finished, you'll have an impressive display model that measures over 12" long.

    What better way to see how an internal combustion engine works than to be able to see all of the parts move! As you turn the crank at your own speed, each of the parts move, just like the real thing. Features operating valves and rubber fan belt. 

    Features:

    • Highly Detailed Plastic Parts Molded in Clear, Metallic Charcoal, Black and Silver

    • See-Through V-8 Internal Combustion Engine

    • Rubber Fan Belt with Vinyl Ignition Wires

    • Moving Pistons with Connecting Rods

    • Camshaft Operates Rocker Arms and Valves

    • External Hand Crank

    • Authentic Engine Display Stand

    • Screwdriver Included

    Specifications:

    • Scale: 1/4

    • Length: 12 Inches (304.8mm)

    • Skill level: 3

    • Parts: 314

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $64.99 Special Price: $58.49

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/48 A-10 Warthog]]> http://www.hobbypeople.net/index.php/revell-1-48-a-10-warthog.html Revell 1/48 A-10 Warthog Designed especially for close air support, the Warthog entered service in 1975. Literally built around the 30mm GAU-8 Gattling gun, the A-10 can also carry immense weapons loads under its wings and fuselage, including AGM 65 Maverick missiles. A highly survivable aircraft, the A-10 has redundant hydraulic systems backed up by manual systems; it can survive direct hits by armor piercing rounds. It flew 8,100 sorties during Desert Storm and has recently seen action in Afghanistan and was a key battlefield weapons system during Operation Iraqi Freedom.
    • Skill Level 2
    • Scale: 1:48
    • Length: 13"
    • Wingspan: 14-5/8"
    • Parts: 167
    Features:
    • Detailed interior with seated pilot and boarding ladder
    • ECM pod
    • Cluster bombs
    • Napalm tanks
    • Maverick missiles and centerline drop tank
    • Decals included for "LET'S ROLL", the 355TH Wing/12AF West Coast A-10 Demo Team, 2003, "NORRIS THE PLAYHOG" 104th TFS Maryland ANG, Sentry Independence, Volk Field Wisc, 1989, and Shark Mouth, the 74th TFS/23TFW, Desert Storm, 1991.

    Price: $25.99 Special Price: $23.39

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/48 A-4 Skyhawk Blue Angels]]> http://www.hobbypeople.net/index.php/revell-1-48-a-4-skyhawk-blue-angels.html

     

    Price: $21.99 Special Price: $19.79

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/48 A-6E Navy Attack Bomber]]> http://www.hobbypeople.net/index.php/revell-1-48-a-6e-navy-attack-bomber.html

    Revell 1/48 A-6E Navy Attack Bomber

    Plastic Model Kit

    This is a Revell 1/48 A-6E Navy Attack Bomber Plastic Model Kit. The A-6 Intruder served the U.S. Navy and the U.S. Marine Corps from 1963 and 1997. The definitive A-6E was equipped with a Target Recognition and Attack Multi-Sensor (TRAM) system, which provided pinpoint accuracy in aerial attacks. Kit features a detailed cockpit with two crew figures, external armament (including Mark 20 "Rockeye" cluster bombs, Mark 82 "Snakeye" high-drag bombs, "Harpoon" anti-ship missiles and optional external fuel tanks), detailed landing gear and two decal marking options: 1. VA 85 Black Falcons, U.S.S. Forrestal, 1978 and 2. VA 35 Panthers, U.S.S. Nimitz.

    Features:

    • Highly Detailed Plastic Parts Molded in Light Gray and Clear

    • Detailed Landing Gear and Cockpit with Two Crew Figures

    • Expansive External Armament and Optional Exteneral Fuel Tanks

    • Waterslide Decals

    Specifications:

    • Skill Level: 2

    • Scale: 1/48

    • Length: 13-3/4 Inches

    • Wingspan: 13-3/8 Inches

    • Parts: 192

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $29.90 Special Price: $26.91

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/48 A-7A Corsair II]]> http://www.hobbypeople.net/index.php/revell-1-48-a-7a-corsair-ii.html

    Revell 1/48 A-7A Corsair II

    Plastic Model Kit

    This is a Revell 1/48 A-7A Corsiar II Plastic Model Kit. Corsair II aircraft were developed during the bloodiest days of the Vietnam War. Once deployed, they served as close air support aircraft. Sophisticated electronics, including the first ever Heads-Up-Display, allowed the Corsair II to land hits with more precision than had ever before been possible. Coupled with the Corsair's massive 15,000 lb ordnance capacity, this precision meant that Corsairs became planner's strike craft of choice. This kit features an optional open or closed canopy, wing-mounted weaponry, and detailed cockpit and landing gear.

    Features:

    • Detailed Plastic Parts Molded in Gray and Clear

    • Optional Open or Closed Canopy

    • Wing-Mounted Weaponry

    • Detailed Cockpit and Landing Gear

    • Waterslide Decals

    Specifications:

    • Skill Level: 2

    • Scale: 1/48

    • Wingspan: 9-3/4 Inches

    • Length: 11-1/2 Inches

    • Height: 4 Inches

    • Parts: 67

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $19.99 Special Price: $17.99

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/48 A6M5 Zero]]> http://www.hobbypeople.net/index.php/revell-1-48-japanese-a6m5-zero.html

    Revell 1:48 Japanese A6M5 Zero

    Plastic Model Kit

    This is a Revell 1:48 Japanese A6M5 Zero Plastic Model Kit. This assembly kit includes highly detailed plastic parts molded in light gray and clear. Includes seated pilot figure, center mounted external fuel tank and turning propeller.

    Specifications:

    • Skill Level: 2

    • Scale: 1:48

    • Wingspan: 9-7/8 Inches (250.8mm)

    • Length: 7-1/8 Inches (180.9mm)

    • Height: 2-1/2 Inches (63.5mm)

    • Parts: 29

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $16.99 Special Price: $15.29

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/48 AH-1F Cobra]]> http://www.hobbypeople.net/index.php/revell-1-48-ah-1f-cobra.html

    Revell 1/48 AH-1F Cobra Gunship

    Fast, effective air support.

    Favored by the U.S. Army, the AH-1F Cobra is a purpose-built attack heli with extreme firepower. Its nose-mounted, 20 mm Gatling gun delivers devastating destruction with extreme accuracy. Kit features a moveable, nose-mounted Gatling gun, side-mounted mini-guns, side-mounted rocket pods, Weapons Officer and pilot figures, plus decals for 1. AH-1F Cobra, 67-15771, First Air Calvary, C Troop "Jaws of Death;" 2. AH-1F, 67-15883 "Trigger and Boomer's Excellent Adventure, Operation Desert Storm and 3. AH-1F, 67-15843, N Troop, 4th Squadron, 2nd Armored Cavalry Regiment, U.S. Army, Iraq, 1991.

    Features and Specifications

    • Skill Level 2

    • Scale: 1/48

    • Length: 11-1/2"

    • Width: 3"

    • Height: 3-1/4"

    • Parts: 79

    Price: $19.99 Special Price: $17.99

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/48 Apollo Lunar Spacecraft]]> http://www.hobbypeople.net/index.php/revell-1-48-apollo-lunar-spacecraft.html

     

    This is the 1/48 Scale Apollo Lunar Spacecraft
                           Plastic Model Kit from Revell®.
                             Suitable for Ages 12 & Up.
    


    FEATURES: Highly detailed pieces molded in white
    Command, Service and Lunar Apollo Modules included
    Interior details plus top section of Saturn Launch Vehicle
    Seated, standing and full astronaut figures included
    Eagle lunar display base
    Waterslide decals
    Illustrated instructions


    INCLUDES: One plastic model

    Price: $44.99 Special Price: $40.49

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/48 AT-6 SNJ Texan]]> http://www.hobbypeople.net/index.php/revell-1-48-at-6-snj-texan.html Revell 1/48 AT-6 SNJ Texan North American's AT-6 Texan advanced trainer is one of the most famous military training aircraft of all time with more than 17,000 examples of all variants being produced. The Texan's top speed was 207 miles-per-hour, the service ceiling was 24,100 feet, and the maximum range was 665 miles.
    • Skill Level 2
    • Scale: 1:48
    • Length: 7-1/4"
    • Wingspan: 10-7/16"
    • Parts: 52
    Features
    • Optional cockpit open or closed with detailed interior.
    • Includes figures of a pilot and instructor.
    • Decals included for SNJ Naval Air Reserve NAS Glenview, IL.1956 and AT-6 Luke Field, AZ.1942.
    • Molded in Light Gray and Clear.

    Price: $16.99 Special Price: $15.29

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/48 B-24D Liberator]]> http://www.hobbypeople.net/index.php/revell-1-48-b-24d-liberator.html

    Revell 1/48 B-24D Liberator

    Plastic Model Kit

    This is a Revell 1/48 B-24D Liberator Plastic Model Kit. For most of World War II, Consolidated's B-24 Liberator was the largest bomber available to the U.S. Army Air Forces. Only when the B-29 Superfortress became operational late in the war did the B-24 give up this distinction. The B-24 was operated in every theater of the war by the USAAF, and the British also used it in large numbers. Includes markings for Fightin' Sam, B-24D-65-CO, 42-51457, 389th Bomb Group, 566th Bomb Squadron, Hethel, Norfolk, England, 1943-44 and Jerk's Natural, B-24D-51-CO, 41-23711, 93rd Bomb Group, 328th Bomb Squadron, Hardwick, England, 1943.

    Features:

    • Highly Detailed Plastic Parts Molded in Light Gray and Clear

    • Detailed Cockpit, Interior and Landing Gear

    • Moveable Turrets and Guns

    • Optional Bomb Bay Doors Opened or Closed with Bomb Load

    • Waterslide Decals

    Specifications:

    • Skill Level: 2

    • Scale: 1/48

    • Length: 17-3/8 Inches

    • Wingspan: 27-1/8 Inches

    • Parts: 167

    *This is a plastic model kit that requires painting and assembly. Paint and supplies required and are available separately.

    Price: $36.99 Special Price: $33.29

    ]]>
    Tue, 02 Sep 2014 15:27:57 +0000
    <![CDATA[Revell 1/48 B-25J Mitchell]]> http://www.hobbypeople.net/index.php/revell-1-48-b-25j-mitchell.html Revell 1/48 B-25J Mitchell One of the most wide