<![CDATA[HobbyPeople.net - Special Products]]> http://www.hobbypeople.net/index.php/rss/catalog/special/store_id/2/ Mon, 14 Jul 2014 16:18:23 +0000 Zend_Feed en_US http://blogs.law.harvard.edu/tech/rss <![CDATA[6 Cell 1600 mAh 2/3A NiMH 1/16 Battery Pack w/Traxxas Pl]]> http://www.hobbypeople.net/index.php/hi-energy-6-cell-1600-mah-2-3a-nimh-1-16-battery-pack-w-trx-plug.html

Hi-Energy 6 Cell 1600 mAh 2/3A NiMH 1/16 Battery Pack w/TRX Plug Specifically made for Traxxas Vehicles.

Specifications

  • Weight 5.3oz 150g
  • Length 3.7in 93.5mm
  • Width 1.3in 34mm
  • Height 0.7in 18mm

Price: $22.99 Special Price: $13.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Airtronics Aquila 6-ch Computer Radio w/RX71E FH1]]> http://www.hobbypeople.net/index.php/airtronics-aquila-6ch-computer-radio-w-rx600-fh1.html

Airtronics Aquila 6ch Computer Radio w/RX71E FH1

Superior Form, Superior Function.

Winner of Model Airplane News Radio of the Year 2014

The Aquila 6 is an advanced 2.4GHz Digital Proportional 6-Channel radio with a unique style and proven 2.4GHz system. The Aquila features Airtronics' proven, rock-solid and reliable 2.4GHz FH1 frequency-hopping transmission scheme. It's true frequency-hopping that provides a superior signal for that “locked-in” feel. And it's ready for any 1-6 channel aircraft or helicopter! From micro electric aircraft to scale aerobatic aircraft, from mini fixed-pitched helicopters to advanced CCPM 3D electric helicopters, the Aquila 6 can handle advanced models with ease! The Aquila 6 is perfect for new pilots just learning to fly, too. The Aquila 6 features a Trainer System that is compatible with all Airtronics SD series transmitters so you can get started flying safely and quickly. Whether you're just starting out or ready to take on advanced 6-channel fixed wing and helicopters, the Aquila 6 is ready to give you superior control.

General System Features:

• 6-Channel 2.4G FHSS-1 Digital Proportional Computer Radio Control System for Aircraft and Helicopters

• Includes Full-Range RX71E 7-Channel 2.4G FHSS-1 Receiver

Aircraft/Helicopter Shared Features:

• 10-Model Memory Direct Model Select (Models 1-3)

• Easy-to-Read Multi-Function LCD with Digital Voltage Display

• User-Selectable Model-Type Templates

• Digital Trims Trainer System Compatible with all Aquila and SD Series Transmitters

• Model Naming

• Model Select

• Audible Low-Voltage Alarm

• Low-Power Range-Check Mode

• Programmable Fail Safe (Ch 1-4)

• User-Selectable Flight Modes (3 Modes)

• Stop Watch and Count-Up Timers

• Data Copy and Data Reset

• Servo Monitor

• Aileron, Elevator, and Rudder Dual Rate

• Aileron, Elevator, and Rudder Exponential

• Servo Reversing

• Servo Centering Sub-Trim

• End-Point Adjustment

• Common or Flight Mode-Specific Trim

Aircraft-Specific Programming Features:

• Throttle Cut

• 5-Point Programmable Throttle Curve

• Aileron Differential

• Mixes:

• Flaperon

• Flap-to-Elevator

• Dual Elevator with End-Point Adjustment

• Ailvator Mixing

• V-Tail Mixing with End-Point Adjustment

• Delta (Elevon) Mixing with End-Point Adjustment

• 2 Programmable Compensation Mixers

Helicopter-Specific Programming Features:

• Common or Flight Mode-Specific Trim with Throttle-Trim Lock

• 9 Pre-programmed Swashplate Templates

• Advanced Swashplate Adjustment

• CCPM End-Point Adjustment

• End-Point Adjustment

• Throttle Cut

• 5-Point Programmable Throttle Curve

• Throttle Hold

• 5-Point Programmable Pitch Curve Revolution Mixing

• 2 Remote Gyro Gains

• 2 Programmable Compensation Mixers

Transmitter Technical Specifications:

• Output Power: 100mW

• Operating Voltage: 6.7-9.6v

• Current Drain: 130-200mA

• Temperature Range: 32-122ºF (0-50ºC)

• Pulse Width: 0.9-2.1msec

• Weight with Batteries: 26.45oz (750gr)

• Frequency/Modulation Type: 2.4GHz/FHSS-1

RX-71E Technical Specifications

• 7 Channels

• Compatible with all SD, Aquila, RDS8000 2.4GHz radios

• Frequency/Modulation Type: 2.4GHz/FHSS-1

• Nominal Input Voltage: 4.8-6.6v

• Weight: .31oz (8.8g) with Case

• Dimensions: 1.80x0.85x0.47in (45.7x21.5x12mm)

• Fail Safe Support: Yes (Ch 1-4)

• Connector Type: Universal 'Z'"

• Temperature Range: 32-212ºF (0-100ºC)

• Dual Antennas on 6 inch extensions for superior installation flexibility for superior flexibility

What's In The Box:

• Aquila 6 6-Channel 2.4GHz FHSS-1 Transmitter

• RX71E 7-Channel 2.4GHz FHSS-1 Receiver

• 7.2v NiMH Rechargeable Battery Pack for Transmitter

• 6 Cell Dry-Cell Transmitter Battery Holder

• AC Dual Output Charger

• On/Off Switch

• User's Guide

Items Required, But Not Included:

• Receiver Battery/Power Source. (Note: Nominal Input Voltage is 4.8v ~ 6.6v, therefore, the receiver may be powered using a 4 Cell or 5 Cell Ni-Cd or Ni-MH battery pack or a 2S Li-Fe/A123 Battery Pack.)

DO NOT USE A 2S Li-Po!

Servos: No servos are included. Analog or Digital servos can be used. We recommend using Airtronics servos that are within the specification range required for your model. However, most modern servos will work perfectly with the Aquila 6

Price: $179.99 Special Price: $159.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Airtronics M12 Competition Pistol Radio w/RX-471 Dry]]> http://www.hobbypeople.net/index.php/airtronics-m12-competition-pistol-radio-w-rx-471-dry.html

Airtronics M12 2.4GHz FH4T

4-Channel Competition Pistol Grip Telemetry-Capable Radio**

with RX-471 FH4 Super Response Receiver

Break the Record!! Feel the Next-Generation in R/C. Pick up an M12!  

This is an Airtronics M12 2.4G FH4T 4-Channel Competition Pistol Grip Telemetry-Capable Radio** with an RX-471 FH4 Super Response Receiver. The M12 is newly-equipped with a 4x higher spec CPU compared to our world champion model, the industry-leading M11X.

Brand new from the ground-up, the M12 is the realization of lofty goals to more than double its analysis ablility and speed. An extremely low latency time, as well as operational and innovative features, guarantee the M12 to be the flagship of a new generation of radios, not just for Airtronics or Sanwa, but for the entire R/C industry.

The M12 responds at almost "Zero-Latency". What is Zero-Latency? It's a measured total latency speed of under 1ms. That's right, the latency of this radio is UNDER ONE MILLISECOND. What's more, the "feeling" of that type of Zero-Latency is 100% adjustible, allowing drivers to change their driving condition and feel instantly.

No other radio has this type of connectivity advantage! The M12's extremely high response time exceeds ALL other radios, and it's all in a package with advanced ergonomics only World Champion Airtronics can deliver. Drive easy knowing you're driving the best!

Bold New Features:

• Weight Reduction Improves Feel and Comfort - 100 Grams Lighter Than M11X

• Includes New RX-471 FH4 Super Response Receiver**

• Supports Telemetry** and PC Link Functions

• PC Link Uses Standard Common Mini USB Connector. No Special Cord Required

• 10-Car Type Templates: The M12 Uses an Entirely New Approach to Car Setup

• 5 Racing Modes: Allows You to Change Programming Settings with a Single Touch to Suit Differing Track and Setup Conditions During a Race

• Telemetry Logger: Able to Record and Send Telemetry Data to Your PC

• Receiver Mode: Allows the M12 to Display Telemetry Data from Other Airtronics Transmitters

• PC Link: Allows You to Save and Load Model Programming Data, Archive Telemetry Data and Update the Transmitter's Firmware

• Dual Steering: Allows You to Adjust Ackerman Angle and Set Up Right and Left Steering Individually

• Adjustable Latency: Allows You to Adjust the "feeling" of the Radio to Match Driving Style and Track Conditions

• Curve Setting: Allows You to Program From 1- to 9-Point Curves for All Channels

• LCD Display: 128 × 256 Full Dot LCD Display with Smooth Scrolling

• Custom Menu: Allows You Creat Custom Programming Menu List

• Evolution From M11X for Competition Level Users

• DMS Setting: Direct Model Select Up to 3 Different Models When Powered Up

• Throttle Mode: Adjust Throttle Trigger Ratio From Standard 7:3 to 5:5 (Balanced)

• Point AUX: Integrated Maximum 6 Point AUX

• MOA MIX : Allows Dig and Burn Control When Using Dual Motors

• 4WS MIX: Allows Front, Rear, Parallel and Tandem Steering When Using Dual Steering Servos

• Speed Setting: Allows You to Adjust Servo Speed in Forward and Return to Neutral Directions

• Model Sort: Allows You to Sort Models in the Model Select List. Put Your Favorites at the Top!

• Offset Setting: Starting Position, Break Store Cancel Function

• Channel Set Menu: Program Common Settings for All Channels from One Screen

• Dry Cell Battery Holder or Use with Ni-MH or 2S LiPo 

Other Features:

• 50-Model Memory

• Direct Model Select Up to 3 Models

• Adjustable Steering and Throttle Channel Response Time

• 10-Car Type Templates Including 3 Crawler Setups

• User-Selectable Start-Up Screen

• PC-Link Allows PC-Connectivity Using Mini USB Cable

• Receiver Safety Link

• Large, Easy-to-Reads LCD with Smooth Scrolling

• Telemetry Logging and Servo Monitor

• Five Racing Modes Allow Setup Changes on the Fly While Driving

• Model Select, Naming, Copy, Clear and Sort

• Selectable Modulation Type

• Programmable Push-Button Switches, Trim Switches, Lever and Dial

• Configurable Vibration Alarms and Timers

• User Naming

• Servo Reversing

• Steering, Throttle and Brake Dual Rate

• End Point Adjustment

• Exponential, ARC and Curve Adjustments

• Servo Speed Adjustment

• Anti-Lock Braking

• Throttle Offset

• Throttle Hold

• Lap Timer and Two Interval Timers

• Large, Easy-to-Read Lap Timer Display

• Two Compensation Mixers

• Channel Set Menu

• Normal, SSR and SHR Servo Modes

• Center or Parallel Trim Types

• Programmable Fail-Safe

• Receiver Battery Voltage Fail-Safe

• Digital Trims

• Servo Sub-Trim

• Variable Rate Adjustment

• Selectable Throttle Bias

• Adjustable Key Volume and Tone

• Programmable Low-Voltage Alert and Limit Alarms

• Separate Display Button

• Inactivity and Over-Voltage Alarms

• Digital Battery-Voltage Monitor

• Adjustible for Right-Handed or Left-Handed Use

M12 Transmitter Specifications:

• Output Power: 100mW

• Nominal Input Voltage: 4.8-7.4v

• Operating Voltage Range: 4.0-9.0v

• Dry Weight: 20.8oz (590g)

• Frequency: 2.4GHz FHSS

• Modulation Type: FH2, FH3, FH3F, FH4T, FH4FT (User Selectable)

RX-471 Super Response Receiver Specifications:

• Nominal Input Voltage: 4.8-7.4v

• Weight: 0.23oz (6.6gr)

• Dimensions: 1.18 x 0.91 x 0.55in (30.0 x 23.3 x 14.0mm)

• Frequency: 2.4GHz FH3/FH4 Selectable Via Transmitter

• Fail-Safe Support: Yes (All Channels)

• Battery Voltage Fail-Safe Limit: 3.5-5.0v (FH3) / 3.5-7.4v (FH4)

What's Included in the Box:

• M12 FH4T Digital High-Response Telemetry Transmitter**

• RX-471 Super Response Receiver**

• On/Off Switch

• Optional Rubber Grips (Large and Small)

• Optional Larger Diameter Steering Wheel

• Optional Steering Wheel Angle Plates (Right and Left)

• Optional Steering Wheel Offset Plate

• Optional Steering Wheel Springs (Soft and Hard)

• Optional Throttle Trigger Angle Brackets (Thin and Thick)

• Receiver Dust Boot Covers

• Transmitter Wrist Strap Mount

Items Required, But Not Included:

• 4 'AA' Batteries for the Transmitter

*About M12 Response Mode - Please be aware that analog servos will not be compatible with the fastest radio settings: SHR, SSR mode. To prevent risk of trouble, do not use analog servo under SHR, SSR mode. Digital servos, SRG, Digital ERG, SDX can be activated under either NOR or SHR mode. SSR mode is only compatible with SRG/SSR series receivers and servos. The Airtronics M12 can be operated with all Airtronics 2.4GHz FHSS-2, FHSS-3 and FHSS-4 car receivers: RX-371, RX-442FS, RX-451, RX-451R, RX-461, RX-462, RX-471.

**Telemetry Capable Airtronics receiver required (RX-461 or RX-462) for full Telemetry capability.

Price: $499.99 Special Price: $449.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Airtronics MT-4 Pistol Grip Radio 2.4G w/Telemetry]]> http://www.hobbypeople.net/index.php/airtronics-mt-4-pistol-grip-radio-2-4g-w-telemetry.html

Airtronics MT-4 Telemetry Radio

4-Channel 2.4G FHSS-4T Surface Radio

The Airtronics MT-4 4-Channel 2.4G FHSS-4 radio control system is the first 2.4G pistol grip radio to provide telemetry, industry leading latency, SSR (narrow pulse-width, super fast servo response) compatibility and 4 channels with advanced programming, all in one ultra-lightweight, comfortable case.

The feature set of the MT-4 is like no other radio in our hobby today. When used with the included Airtronics RX461 (92010) FHSS-4 receiver, real-time telemetry tells you what you need to know when you need to know it. In addition, the MT-4 supports the Airtronics FHSS-2 and FHSS-3 modulation types, so it will work with any Airtronics 2.4G FHSS-2 and FHSS-3 surface receiver as well (just no telemetry of course). This means you'll have your choice of affordable aftermarket receivers and high-performance ultra-fast racing receivers to use with the radio. And, all of this is packed into a new ultra-lightweight comfortable case that features an integrated antenna, adjustable grips, adjustable steering and an adjustable trigger.

Whether you're racing at a world-class level, rock crawling over the most complicated courses, or just bashing in the backyard, the MT-4 will do what you need when you need it.

System Features:

• 4-Channel 2.4G FHSS-4T Digital High-Response Computer Radio with Advanced Programming

• Includes RX461 (92010) 2.4G FHSS-4T Telemetry Receiver

• Telemetry System Displays Temperature, RPM/Speed and Voltage in Real-Time

• High-Power FHSS-4T Technology Provides the Best Reception and Connectivity

• 4-Cell Battery Holder for Lighter Weight

• Accepts Optional NiCd or NiMH Batteries or 2S LiPo or 2S Li-Fe/A123 Battery Packs

• 18-Model Memory

• Telemetry Logging

• Channel Set Menu

• Servo Reversing

• Steering, Throttle and Brake Dual Rate

• End-Point Adjustment

• Exponential and ARC Adjustment

• Servo-Speed Adjustment

• Anti-Lock Braking

• Throttle Offset

• Lap and Interval Timers

• Total, Best and Individual Lap Display

• Four-Wheel Steering Mixing

• Dual-Throttle Mixing w/Dig & Burn

• Normal, SSR and SHR Servo Modes

• Center or Parallel Trim Types

• Step Auxiliary

• Point Auxiliary

• Auxiliary Mixing

• Programmable Fail-Safe

• Receiver Battery Voltage Fail Safe

• Digital Trims

• Servo Sub-Trim

• Adjustable Throttle Trigger

• Programmable Switches, Lever and Dial

• Adjustable Steering Wheel

• Adjustable Grip

• Variable-Rate Adjustment

• Model Naming

• Model Select

• Model Select Shortcut (Direct Model)

• Model Clear

• Selectable Modulation Type

• Multi-Function LCD Contrast

• Adjustable Key Volume and Tone

• Programmable Low-Voltage Alarm

• Inactivity and Over-Voltage Alarms

• Digital Battery-Voltage Monitor

Transmitter Specifications:

• Output Power: 100mW

• Nominal Input Voltage: 4.8-7.4v

• Operating Voltage Range: 4.0-9.6v

• Dry Weight: 13.68oz (388gr)

• Frequency/Modulation Type: 2.4G/FHSS-4T/FHSS-3/FHSS-2 (Selectable)

RX461 (92010) Receiver Specifications:

• Frequency/Modulation Type: 2.4G/FHSS-4T

• Nominal Input Voltage: 4.8-7.4v

• Weight: 0.34oz (9.6gr)

• Dimensions: 1.43 x 1.04 x 0.64in (36.2 x 26.5 x 16.3mm)

• Fail Safe Limit: 3.5-7.4v (FH4T) / 3.5-5.0v (FH2/FH3)

• Connector Type: Universal 'Z'

What's In The Box:

• MT-4 4-Channel 2.4G FHSS-4T Transmitter

• RX461 (92010) 4-Channel 2.4G FHSS-4T Receiver

• On/Off Switch

• Receiver Battery Holder

• Optional Grip

• Wrist Strap Anchor

• RPM/Speed and Temperature Telemetry Sensors

• User's Guide

 Items Required, But Not Included:

Transmitter Batteries: The transmitter requires 4 'AA' Alkaline batteries. Conversion to rechargeable batteries is easy and affordable using NiCd or NiMH cells and the Airtronics 95034 110V AC Dual Charger. Alternatively, the transmitter can be powered using a 2S LiPo or 2S A123/LiFe battery pack. DO NOT USE A 3S LiPo!

Receiver Battery: The receiver's Nominal Input Voltage is 4.8- 7.4v, therefore, the receiver can be powered using a 4- to 6-Cell NiCd or NiMH battery pack or a 2S LiPo or 2S A123/LiFe battery pack. DO NOT USE A 3S LiPo!

Servos: No servos are included. Analog or Digital servos can be used. We recommend using Airtronics Digital servos that are within the specification range required for your model.

Price: $249.99 Special Price: $219.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Airtronics MX-V w/WaterProof receiver, 3Ch 2.4Ghz FH2 Radio]]> http://www.hobbypeople.net/index.php/airtronics-mx-v-pistol-grip-with-w-p-receiver-3ch-2-4ghz-fh2-radio.html

Airtronics MX-V

3-Channel 2.4GHz FH2 Digital Pistol Grip Surface Radio System

This Version Includes a 3-Channel WATERPROOF Receiver

This is an Airtronics MX-V 3-Channel 2.4GHz FH2 Digital Pistol Grip Surface Radio System with Waterproof Receiver. No RC sport-racer needs more! Sanwa put the most important functions of a modern transmitter in a new ergonomic design with fast radio response thanks to FH2 2.4GHz technology! The MX-V's user-friendly menu features easy-to-setup functions and a sensational price to performance ratio. With this transmitter, every R/C driver gets all the decisive features in a case design similar to the high-performance MT-4. 

This version of the MX-V comes with a 3-Channel 2.4GHz FH2 Waterproof receiver, but works with ALL Airtronics FH2 2.4GHz surface receivers. This guarantees interference-free R/C car fun, great range and fast transmission of the signal. The 10-model memory with model naming allows an easy and quick change between your models. The complete setup works via the multifunctional display. No matter if you're setting up the antilock braking system, model selection, or expo adjustment, it's no problem with the large and clear display. All important functions are arranged intuitively and can be reached without any problems even with small hands. Due to the low weight, compared to other transmitters in this category, those 45-minute races can be finished without getting tired.

Light weight, affordable price, simple menu system, the right features, fast response and now a waterproof receiver - All the things you'd expect in a much more expensive setup. The Airtronics MX-V is the ultimate RC enthusiast's sport radio.

Features:

• 3-Channel Full-Range 2.4GHz FH2 Digital Proportional Computer Radio for Cars, Trucks and Boats

• Compatible with all Airtronics 2.4GHz FH2 Surface Receivers

• 4-Cell Battery Holder for Lighter Weight and Improved Balance

• Easy-to-Read LCD Screen

• 10 Model Memory

• Servo Reversing All Channels

• Dual Rate Steering

• End Point Adjustment All Channels

• Exponential Steering and Throttle

• Anti-Lock (ABS) Braking

• Digital Trim Display

• Servo Sub-Trim Steering and Throttle

• 3-Character Model Naming

• Battery Voltage Monitor

• Ergonomic, Comfortable Feel

• Textured grip to prevent slipping

• Battery-Less Memory Retention

• Throttle Fail Safe

• Low Voltage Alarm

• Over 1000 Foot Range

• Compatible with Analog or Digital Servos

Transmitter Specifications:

• Output Power: 100mW (FH2)

• Nominal Input Voltage: 4.8v ~ 6.0v

• Operating Voltage Range: 4.0v ~ 9.6v

• Dry Weight: 11.64oz (330gr)

• Frequency: 2.4GHz FH2

Receiver Specifications:

• Nominal Input Voltage: 4.8v ~ 7.4v

• Weight: 0.25oz (7.1gr)

• Dimensions: 1.18 x 1.04 x 0.57in (30.0 x 26.5 x 14.5mm)

• Frequency: 2.4GHz FH2

• Fail Safe Support: Yes (Throttle)

What's In The Box:

• MX-V 3-Channel 2.4GHz FH2 Transmitter

• 3-Channel 2.4GHz FH2 Waterproof Receiver

• On/Off Switch

• Receiver Battery Holder

• User's Guide

Items Required, But Not Included:

• 4 'AA' Alkalkine Batteries or Equivalent Rechargeable Batteries for Transmitter

• 4 to 6 Cell Ni-CD/MH Battery Pack or 2S LiPo/LiFe Battery Pack

• Analog or Digital Servos to Suite Your Model

Price: $119.99 Special Price: $99.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Airtronics Super Vortex Zero ESC & RX-472 Combo (ROAR)]]> http://www.hobbypeople.net/index.php/airtronics-super-vortex-zero-esc-rx-472-combo.html

Airtronics Super Vortex Zero ESC & RX-472 Combo

ROAR APPROVED w/Sanwa Synchronized Link (SSL) Support

The Super Vortex ZERO ESC was designed for competition from the ground-up. With almost immeasurable resistance, huge current handling, and advance programming features, this competition ESC is the top ESC in its class. The Super Vortex ESC is compatible with all modern 2.4GHz radios and receivers.

The RX-472 features an extremely low latency time and high frame rate, which makes you feel more connected to your model than ever. Combined with Airtronics or Sanwa Super Response SRG digital servos, the RX-472 will give you reaction speeds like never experienced before!

What is Sanwa Synchronized Link?

When used with an Airtronics M12, an RX-472 2.4GHz FH4T Super Response 4-channel receiver and the Sanwa Super Vortex ZERO ESC, the Sanwa Synchronized Link (SSL) system allows you to change many ESC programming values directly from the transmitter using the transmitter's CODE AUX function. This saves you the time and hassle of not needing to stop and change programming values manually through the ESC. You can make these changes remotely and in higher resolution increments for improved performance. In addition, telemetry data such as speed or RPM, ESC temperature, motor temperature (if supported), and battery voltage can be read directly from the Super Vortex ZERO ESC and displayed on the transmitter.

Super Vortex ESC Specifications and Features

• Brushless Sensored Design with Custom Sanwa ESC Programming

• Adjustable Voltage Cutoff

• Twelve Programming Modes

• Thermal Overload Protection Circuit

• Compatible with Normal, SHR, and SSR Channel Modes

• Supports Remote Programming via the Transmitter (SSL Supported ONLY)

• Input Power (Cells): 1S or 2S LiPo (4C to 6C Ni-MH)

• Motor Limit: 3.5T with 1S or 4.5T with 2S LiPo

• On Resistance: 0.00038 Ohms

• Rated Current: 740 Amps/Phase

• BEC: 6.0V/3.0A

• Dimensions: 1.25x1.39x.77” (32x35.5x19.7mm)

• Weight: 42g (Excluding Wiring and Power Capacitor)

RX-472 Features:

• Sanwa Synchronized Lik (SSL) Compatible

• Designed for Use with Artronics M12 and Sanwa Exzes-Z Transmitters and Sanwa Super Vortex Zero ESC*

• Extremely Low Latency Time and High Frame Rate

• Compatible with Airtronics Super Response Servos

• Compatible with 2S Li-Po Receiver Battery, So You Can Use High Voltage Servos Without a Voltage Regulator

• Small and Lightweight

• Finger Accessible Bind Button

• Supports Receiver Battery Fail Safe Monitoring

RX-472 Specifications:

• Model: RX-472 (92015)

• Frequency: 2.4GHz FH3/FH4T (Selectable Via Transmitter)

• Nominal Input Voltage: 3.7 to 7.4 Volts

• Dimensions: 1.18 x 0.91 x 0.55 Inches (30.0 x 23.3 x 14.0mm)

• Weight: 0.23 Ounces (6.6g)

• Battery Fail Safe Limit: 3.5 to 5.0 Volts (FH3) / 3.5 to 7.4 Volts (FH4T)

Included:

• Super Vortex Zero Competition ESC

• Airtronics RX-472 FH4 Receiver

• Sensor Cable

• Cooling Fan w/Mounting Screws

• 3 Feet 12AWG Flexible silicone Wire

• Heat-shrink Tubing

• User's Guide

Price: $339.98 Special Price: $279.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[AMT '10 Dodge Challenger SRT8]]> http://www.hobbypeople.net/index.php/amt-10-dodge-challenger-srt8.html

AMT 1/25 2010 Dodge Challenger SRT8

Showroom Replica Plastic Model Kit

This is an AMT 1/25 2010 Dodge Challenger SRT8 Showroom Replica Plastic Model Kit. This Showroom Replica is Ready to Roll! The 2010 Dodge Challenger SRT8 is 100% pure muscle car. Now, AMT is offering this sweet ride in 1/25 scale, in the Showroom Replicas line of “curbside” style kits. Designed for a quick and easy build, Showroom Replica kits feature engine detail engraved into the chassis pan.

Features:

• Detailed Plastic Parts Molded in White and Clear with Chrome Plated Parts

• Newly Tooled Brake Rotor/Calipers

• Super-Detailing Decal Sheet

• SRT8 Striping in Multiple Colors

• Fast and Easy to Assemble

Specifications:

• Scale: 1/25

• Skill Level: 2

*This is a plastic model kit that requires painting and assembly. Paint, modeling tools and supplies required and are available separately.

Price: $22.99 Special Price: $17.24

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[AMT Star Trek Romulan Bird Of Prey]]> http://www.hobbypeople.net/index.php/star-trek-romulan-bird-of-prey.html

AMT Star Trek Romulan Bird Of Prey

A fan favorite returns with the arrival of the Romulan Bird of Prey. The mysterious ship from the classic Star Trek episode, “Balance of Terror” has been gone for 35 years and Round 2 brings it back. Many modelers missed out on this formidable adversary the first time around. They won’t miss a second chance after all these years.

Features and Specifications

• Scale: 1/650

• Skill Level: 2 (ages 10 and up)

• Glue assembly, paint required

• Molded in white, plus clear parts

• fan favorite ship available for the first time in 35 years

• includes optional plasma weapon and accurized nacelle caps

• includes decal sheet featuring the iconic bird graphic

• vintage packaging style

Price: $23.99 Special Price: $17.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[AMT White Road Boss Truck]]> http://www.hobbypeople.net/index.php/white-road-boss-truck.html

AMT White Road Boss Truck

AMT continues to please the serious big rig truck modeler with ongoing tractor and trailer reissues from the tooling archives. The White Road Boss has not been available in many years and is a super detailed model.

Features and Sepcifications

• Scale: 1/25

• Skill Level: 3 (ages 12 and up)

• Glue assembly, paint required

• Molded in white with chrome, black vinyl tires and water-release decals

• Over 200 parts

Price: $37.99 Special Price: $28.49

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Associated RC10 Worlds Car Kit Replica]]> http://www.hobbypeople.net/index.php/associated-rc10-worlds-car-kit-replica.html

Team Associated RC10 Worlds Car

1/10th Scale Competition 2WD Off-Road Kit

Build and race the first RC car with a 10-year winning tradition.

The RC10 World’s Car is the pinnacle of vintage RC10 buggy performance. This replica features modern-era upgrades while retaining the spirit of the original RC10 Worlds car that crowned Brian Kinwald as 2WD IFMAR World Champion in 1993.

The new World’s Car is equipped with updated V2 hard-anodized threaded shock bodies and aluminum adjustment collars to provide improved performance and adjustability.

The drivetrain now features the famous Stealth 3-gear transmission with a ball differential, CVA axles and V2 slipper to harness the power of modern brushless motors. A new durable plastic gear cover was added to protect the V2 slipper and gears. The included 2.2” wheels fit current 2WD buggy tires so racers can select the right tire for their track.

The RC10 World’s Car kit updates make the buggy easier to build and service without altering the authentic look of the original. The black hard-anodized machined chassis, trimmed front kick-up plate, black motor mount, and nose brace tubes look like the original parts.

Some plastic parts have been updated to improve durability, accept modern batteries and components, or increase performance. Color matched with the original World’s car kits, these parts are backwards compatible with original buggies.

Take a journey through time and drive a Team Associated RC10 World’s Car - it’s worlds better now than it was back then!

RC10 World’s Car Kit - Vintage Replica 1/10 Scale Off-Road Racing Buggy Features

• Black, hard-anodized 6061-T6 machined aluminum monocoque chassis

• Stealth 3-gear transmission with ball differential

• V2 slipper assembly with molded gear cover

• 16 precision ball bearings included

• Turbo Mirage body, 5.5” wing, and replica vintage decals

• V2 threaded hard-anodized 6061-T6 aluminum coil-over shocks with molded bleeder caps

• Independent suspension with durable long front arms and refined geometry

• In-line aluminum front axles and 30-degree caster blocks

• Fiber composite shock towers and battery strap

• Graphite transmission brace

• Updated CVA axle drivetrain

• World’s Car bellcrank steering

• 2.2” one-piece wheels

• Steel turnbuckles

Required to complete

• Electric motor

• Battery, 2S 7.4V LiPo stick or 7.2V NiMH

• Battery Charger

• 2-channel Radio System

• Steering Servo

• Electronic Speed Control

• Pinion Gear

• Front and Rear 1/10 Buggy Tires for 2.2" wheels

Vehicle Specifications

• Power Source Electric

• Terrain Off-Road

• Body Style Buggy

• Scale Size 1/10 Scale

• Assembly Level Kit*

• Length 15 inch/381mm 

• Width 8.93 inch/248mm 

• Wheelbase Varies 10.33-10.54 inch/262.5-267.7mm

• Weight Varies

• Drive 2WD

*This vehicle comes as a kit and must be fully assembled by the user. Electronics, tires, and a motor are required.

Price: $279.99 Special Price: $229.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[BH Edge 540 V3 55cc ARF 90'']]> http://www.hobbypeople.net/index.php/edge-540-v3-55cc-arf-90.html

BH Edge 540 V3 55cc ARF 90''

The BH Edge 540 is the "next generation" of big aerobatic ARF aircraft. BH Engineers have been working with top aerobatic pilots from around the world to develop these superior flying models. BH now offers several aircraft in these larger sizes to suit your taste in aircraft and size.

When you open one up you will be impressed. The construction is light and strong, the assembly techniques are advanced making the model both fly well AND easy to assemble. Two piece wing, stab, tab & pin factory hinging, custom hardware, perfect fitting cowl and wheel pants are all designed to get you flying quickly. And when you're done flying, this plane packs up small so you can get it home in a reasonable sized vehicle.

From their advanced construction to advanced flight performance, these new Edge 540 V3 aircraft are light and fly exceedingly well.

Specifications

• Wingspan 2286mm - 90"

• Length 1806mm - 71"

• Weight 7.9kg - 17.5lb

• Engine Size 55cc Gas/Ignition

• Covering Oracover

• Servos: 94780 servos for each aileron, stab, and rudder.

Price: $699.99 Special Price: $483.57

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[BH Harmon Rocket (RV-4) 65'' 20cc Gas ARF]]> http://www.hobbypeople.net/index.php/bh-harmon-rocket-75-20cc-gas-arf.html

BH Harmon Rocket

65 in. 20CC Gas ARF

Fly a scale model that is high-performance and unique, the Harmon Rocket! The full-scale aircraft is a modified RV-4 with a smaller wing and more power. The model is beautiful, great-flying, and well-built. BH Models has done an outstanding job recreating this spectacular aircraft in 1/4 scale!

Inside, you'll find superior construction. From lightweight laser-cut interlocking parts that are factory-built straight and true, to fiberglass parts that fit flawlessly, BH Models has made the Harmon Rocket strong and lightweight. The horizontal stabilizer and wing are bolt-on with an aluminum tube joiner. The hardware is custom to BH. The horns bolt on with ease and precision, and the unique clevis system makes installation quick and the result solid.

We flew our first sample with a 1.40 gas engine. It was unbelievable and, simply put, overpowered. It provides scale speeds at under half throttle and unlimited vertical performance. We recommend a 20cc (1.20ci) gas engine or glow four-stroke for scale speed with good climb and aerobatic performance. If you do over-power the aircraft, throttle and speed management will be required.

For servos, we recommend metal-geared high-torque servos. The Airtronics 94851 servo is great for ailerons, flaps, elevator, and rudder. For throttle control, a quality standard servo such as the Airtronics 94722 BB Digital is the perfect choice.

Unique, Simple, Exciting. The Harmon Rocket is truly a Rocket of a scale sport aircraft and with it' 65" wingspan, it is quarter-scale!

Model Specifications:

• Wing Span: 65 Inch - 1660mm

• Length: 62 Inch - 1570mm

• Weight: 11 pounds - 4.8kg

• Power: 1.20 ci - 20cc gas/glow

• Functions: Ailerons, Elevator, Rudder, Throttle, Flaps

Servos Required:

• 2 for Ailerons

• 2 for Flaps

• 1 each for Elevator, Rudder, Throttle (and possibly choke or cutoff according to the engine)

• Metal-Gear High-Torque servos recommended for control surfaces.

Features:

• Realistic Painted Pilot

• Hinges are tongue/groove/pin type

• Custom hardware

• Fiberglass Cowl

• Fiberglass Wheel Pants

• Heavy Duty Gear

• Advanced Wood Contruction

• Lightweight

• Covered with Oracover (Premium Iron-On Covering)

• Large Removable top-hatch is with easy access

• Bolt-on Tail

Price: $499.99 Special Price: $367.51

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[BH Su26M 68'' 30CC Gas ARF]]> http://www.hobbypeople.net/index.php/bh-su26m-81-35cc-gas-arf.html

BH Su26M 68'' 30CC Gas ARF

30cc is the new hot size for gas powered aircraft. The new Su-26M 68” span is optimized by BH for the 30cc class aircraft. This is a factory built ARF that is unbelievably easy to get flying.

Inside this beautifully constructed airframe you'll find laser cut wood parts that interlock for a strong lightweight airframe. The factory jig-builds this airframe to ensure it's perfectly straight and true and professionally covers it with high quality Oracover iron-on covering. The cowl is molded and factory fit and painted. There's even a painted pilot inside. The wing is 2-piece bolt-on as well as the horizontal stabilizer. Even the pushrods and linkages are custom made by BH models.

All of this makes it easy to finish and easy to transport. And that's good because once you fly the Sukhoi from BH you'll be wanting more and more airtime. Right-sized, right-priced, and built-just-right, the Sukhoi from BH Models is the best of the “next generation” of quality ARF's.

Specifications

• Wingspan: 1,730 mm 68.11 in.

• Length: 1,620 mm 63.78 in.

• Weight: 5.6 kg 12.32 lbs.

• Radio: 06 channels.

• Servo: 06 servos (We recommend 94851 servos)

• Engine: 30 cc Gas.

• Construction: All Balsa/Plywood Construction Covered wtih Oracover

Price: $569.99 Special Price: $414.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Castle Sidewinder SV3 SCT System w/3800kv Waterproof]]> http://www.hobbypeople.net/index.php/castle-sv3-sidewinder-sct-system-w-3800kv-waterproof.html

Castle Creations SV3 Sidewinder SCT & 3800KV Motor

1:10th Scale Waterproof Sport Brushless Power System

This is a Castle Creations SV3 Sidewinder SCT & 3800KV Motor 1:10th Scale Waterproof Sport Brushless Power System. The Sidewinder SCT controller offers a 40% increase in power handling over the previous Sidewinder 1/10 but keeps the same great Sidewinder affordability and the Neu-Castle 4 pole 1410 1Y motor offers 50% more torque than Castle's great CM36 series motors of similar kv. This is a 2 cell race motor perfect for 2 and 4 wheel drive Short Course Trucks.

Add some cool to your motor with the included CC Blower fan and shroud and you are ready to run with the big boys.The Sidewinder SCT is ready to run out of the box, but it is completely Castle Link™ compatible too - drivers can use their Castle Link and Windows PC to tune and tweak all their favorite settings such as brake and throttle curves, throttle response, drag brake and many other parameters that add up to an incredible RC driving experience.

ESC Specifications:

• Input Voltage: 2S to 3S LiPo

• Waterproof: Yes

• Brake: Proportional

• Reverse: Yes (with Lockout)

• Low Voltage Cutoff: Programmable

• Dimensions: 1.80 x 1.40 x 0.9 Inches (45.72 x 35.56 x 22.86mm)

• Weight (with Wires & No Battery Connector): 2.2 Ounces (62.4g)

Motor Specifications:

• KV: 3800

• Length: 2.0 Inches (52.7mm)

• Diameter: 1.4 Inches (36mm)

• Shaft Size: 1/8 Inches

• Weight: 8 Ounces (227g)

What's Included:

• Sidewinder SCT Edition ESC

• Neu-Castle 1410 1Y 3800Kv Motor

• CC Blow Fan Shroud for 36mm Motors

*Although the Sidewinder SV3 and Castle brushless motors are waterproof, always rinse the ESC and motor with fresh water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servo, radio and chassis are also waterproof before exposing them to liquids of any kind.

Price: $119.97 Special Price: $99.97

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Cermark Cosmos EP]]> http://www.hobbypeople.net/index.php/cermark-cosmos-ep.html

Cermark Cosmos

Your 3-D Machine

You are about to enter the third dimension. Gaze upon the Cosmos, Cermark's three-dimensional machine! With Cosmos, you see more, yet less. The streamlined aerodynamic full fuselage is easier to see in flight. All the electronics are hidden inside making the Cosmos a lean, clean, flying machine! Less drag means better performance. With Captain Cosmos aboard to guide you, your aerobatic maneuvers will command applause whenever you fly! Cermark's Cosmos features large powerful control surfaces for true 3-D style flying when you feel the need. Reduce the control throws and your Cosmos becomes as gentle to fly as most trainers. Expand your modeling world with Cermark's Cosmos!

Specifications:

• Wingspan: 31.25 in

• Length: 31.25 in

• Wing Area: 285 Square In

• Weight RTF: 14-17 Oz.

Additional Items Required but Not Included:

• 4+ channel radio with 4 micro servos

• 28mm brushless outrunner type motor

• Brushless speed control 12-20 amp

• 3 cell 900-1300mah Lithium Polymer battery pack

*NOTE: This is a Cermark Special Buy Item. This item is brand new. Please be aware, some items have shop worn or torn boxes. All Cermark Items: Sales are AS-IS and Final. No Returns or Exchanges. Specifications and recommendations subject to change without notice. We are not responsible for inadvertent errors.
REPLACEMENT PARTS ARE NOT AVAILABLE

Price: $79.99 Special Price: $49.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Cermark Extra 260 EP/GP]]> http://www.hobbypeople.net/index.php/cermark-extra-260-ep-gp.html

Cermark's Extra 260 EP/GP

Constructed of top-quality balsa, overlaid with excellent covering, designed for super-light weight, together with a strong & light painted fiberglass cowl. Variable-section aerofoil offers excellent 3D performance. The Extra 260 has fantasttic craftsmanship, and will lead you into the magic 3D flying world!

Features:

• Two-piece removable wings

• Excellent aerobatics and 3D performance

• Lightweight construction

• High structural strength

• Super quality

• Easy installation

• Complete accessories

Specifications:

• Wingspan: 53.5 In

• Length: 50.5 In

• Wing Area: 574 sq. in. 

• Flying Weight: 4.6-5 lbs.

Required but NOT Included:

• Engine: Magnum Engines XL .52 (210851) or Motor: Hobby People HP G-46 Motor (129066) with HP 80A ESC (118628)

• Radio: Airtronics Aquila 6-channel Radio (751662)

• Servos: 5 Airtronics 94835 Servos (474535)

*NOTE: This is a Cermark Special Buy Item. This item is brand new. Please be aware, some items have shop worn or torn boxes. All Cermark Items: Sales are AS-IS and Final. No Returns or Exchanges. Specifications and recommendations subject to change without notice. We are not responsible for inadvertent errors.
REPLACEMENT PARTS ARE NOT AVAILABLE

Price: $199.99 Special Price: $119.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Cermark Extra 260 “Lite” EP Only]]> http://www.hobbypeople.net/index.php/cermark-extra-260-lite-ep-only.html

Cermark's Extra 260 "Lite" EP Only

Constructed of top-quality balsa, overlaid with excellent covering, designed for super-light weight, together with a strong & light painted fiberglass cowl. Varying-section aiffoil offers excellent 3D performance. The Extra has fantastic craftsmanship and will lead you into the magic 3D flying world!

Features:

• Two-piece of removable wings

• Excellent aerobatics and 3D performance

• Lightweight construction

• High structural strength

• Super quality

• Easy installation

• Complete accessories

Specifications:

• Wingspan: 54 In

• Length: 51.5 In

• Wing Area: 581 sq. in. 

• Flying Weight: 3.75-4.2 lbs.

Reqired but Not Included:

• Motor: Hobby People 2814/06 Brushless Outrunner Motor (129026)

• ESC: HP 80A ESC (118628)

• Battery: Hobby People 11.1V 3S 3200mAh LiPo Battery (118390)

• Radio: Airtronics Aquila 6 channel Radio (751662)

• Servos: 4 Airtronics 94835 Servos (474535)

• Prop: APC 13x6.5E - 14x7E

*NOTE: This is a Cermark Special Buy Item. This item is brand new. Please be aware, some items have shop worn or torn boxes. All Cermark Items: Sales are AS-IS and Final. No Returns or Exchanges. Specifications and recommendations subject to change without notice. We are not responsible for inadvertent errors.
REPLACEMENT PARTS ARE NOT AVAILABLE

Price: $199.99 Special Price: $119.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Cermark F-22 EDF RX-R (SAPAC)]]> http://www.hobbypeople.net/index.php/cermark-f-22-edf.html

Cermark F-22 EDF

The SAPAC F-22 resembles the famous and very-advanced Raptor Jet. The SAPAC F-22 exemplifies the same beautiful lines as the original fighter jet. The wing and body used on this F-22 are specifically designed to allow high-G maneuvers, yet keep a very low wing-loading. This F-22 is a stable aircraft with excellent performance. The included twin ducted-fans with brushless motors give the F-22 great performance and power for any aerobatic action desired. The F-22 must be flown with at least a 4-channel radio system (not included). On the ground you have control of the steerable nose gear, in the air you have control of speed, ailerons, elevator and rudder (includes mounted servos).

Specifications:

• Length: 44.30 in (1125mm)

• Wingspan: 31.7 in (805mm)

• Wing Area: 3.98 sq. feet

• Wing Loading: 9.25 oz/sq. feet

• Flying Weight: 37 Oz (1050g)

•  Requires but does not include: 4+ -channel transmitter with receiver, 11.1V 3,000 mAH LiPo battery and charger.

*NOTE: This is a Cermark Special Buy Item. This item is brand new. Please be aware, some items have shop worn or torn boxes. All Cermark Items: Sales are AS-IS and Final. No Returns or Exchanges. Specifications and recommendations subject to change without notice. We are not responsible for inadvertent errors.
REPLACEMENT PARTS ARE NOT AVAILABLE

Price: $219.99 Special Price: $139.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Cermark Jas 39 EDF RX-R (SAPAC)]]> http://www.hobbypeople.net/index.php/cermark-jas-39-edf.html

Cermark's Jas-39 RR EDF Jet

This Receiver-Ready Jas-39 Foam EDF Jet is the jet you have been waiting for! With its real-life scale appearance, you will be the envy of your friends. This is a blowout deal and there are only a few in stock! GET YOURS TODAY!

Specifications:

Wingspan: 35.43 in

Fuselage Length: 59.05 in

Wing Loading: 1.8 oz/sq.dm

Main Wing Area: 23 sq.dm

Flying Weight: 42.33 oz

Rate of Push and Weight: 0.8

70mm EDF

Required but NOT included:

Radio: Airtronics Aquila 6-channel radio (751662) or equivalent

Receiver: Airtronics RX600 6-ch mini receiver (468518) or equivalent

14.8V LiPo Battery & Charger

*NOTE: This is a Cermark Special Buy Item. This item is brand new. Please be aware, some items have shop worn or torn boxes.  All Cermark Items: Sales are AS-IS and Final. No Returns or Exchanges. Specifications and recommendations subject to change without notice. We are not responsible for inadvertent errors.
REPLACEMENT PARTS ARE NOT AVAILABLE

Price: $219.99 Special Price: $129.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Cermark Ultimate EP]]> http://www.hobbypeople.net/index.php/cermark-ultimate-ep.html

Cermark's Ultimate Biplane ARF

Cermark's Ultimate-E ARF marks a new era in aerobatic excitement! Imagine scale appearances with performance to match! Never before has something so beautiful been so easy to complete. And the Ultimate E is small enough to take to the field in one piece, yet large enough to fly when the "Park Flyers" are grounded.

Features:

• One-piece wings for fast assembly

• Easy-access battery hatch

• Factory-installed pilot and canopy

• All neccessary hardware plus spinner included

• Five-color factory applied color scheme

• Four ailerons for maximum roll rate

• Oversize control surfaces

Specification:

• Wingspan: 30 In

• Length: 31 In

• Wing Area: 300 Sq-in

• Flying Weight: 22-28 oz.

Required but NOT Included:

• Propeller: APC 11 x 7E

• Controller: Hobby People 20A ESC (118615)

• Motor: 2814-1030 Motor

• Battery: 11.1V, 3 Cell Li-Po 1300-2100mAh

• Radio: Airtronics Aquila 6 Channel Radio (751662) 

• Servos: 4 Hobby People HP-A9N Micro Servo

*Note: This is a Cermark Special Buy Item. This item is brand new. Please be aware, some items have shop worn or torn boxes. All Cermark Items: Sales are AS-IS and Final. No Returns or Exchanges. Specifications and recommendations subject to change without notice. We are not responsible for inadvertent errors.
REPLACEMENT PARTS ARE NOT AVAILABLE

Price: $99.99 Special Price: $64.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[DHK Hunter BL SCT 1/10 4x4 Brushless - No Battery/Charger]]> http://www.hobbypeople.net/index.php/dhk-hunter-bl-sct-1-10-4wd-brushless-no-battery-or-charger.html

DHK Hunter BL SCT 1/10 4WD Brushless

Drive Hard. Rest Easy.

Expect more when you drive the Hunter SCT BL from DHK. Expect more reliability, more performance, more fun! DHK's Hunter has the performance and brushless-power to impress experienced drivers with an easy setup perfect for any skill level.

The backbone of the Hunter is the tough, double-deck chassis layout and competition suspension. This super-stiff chassis and plush suspension is complemented by an advanced and tunable 3-differential four-wheel drive (4x4) power-train normally only reserved for 1/8th scale racers. These advanced differentials provide tuning (by using different weight oils) not found in lesser RTR vehicles. Propulsion is by a powerful brushless motor and ESC ready for any 2-cell LiPo battery or 6-7 cell NiMH pack.

The Hunter BL is loaded with even more superior design features from adjustable threaded shocks to its mid-motor design. Set up the Hunter for hard driving whether you're competing or bashing, on just about any surface from asphalt to dirt. And, the Hunter SCT BL RTR is factory-assembled and ready to use. Just charge your batteries and get ready to race!

Drive hard with the rugged, refined SCT design. Get out and win with the DHK Hunter SCT BL.

Features

• Factory-built with 2.4Ghz Radio system

• Brushless motor (3970kv) and 45A BL ESC

• 4WD Mid-Motor Chassis Layout

• Racing 3-Differential Powertrain (front, center, and rear)

• Adjustable Oil-filled Coil-Over Shocks

• Adjustable turnbuckles

• Large impact-absorbing front and rear bumpers

• Standardized wheel hexes and short course body. (After market wheels and bodies readily fit.)

Specifications

• Length: 22 in (558.8mm) from bumper to bumper

• Width: 12.2 in (310mm)

• Height: 7.68 in  (195mm)

• Wheelbase: 13 in (330mm)

• Radio: DHK 2.4Ghz Pistol Grip

• Steering Servo: 3kg

• Weight: 5.50 lbs (2.49kg)

• ESC: Brushless 45A

• Motor: Brushless 3970kv

• Speed: 35+ MPH

Items needed to complete

• 2-cell Li-Po battery (such as HP# 118119 - 4000Mah, or 118130 - 5000Mah)

• Suitable battery charger (such as HP# 118546 - Activator EZ, or HP# 118551 - Activator 50)

Price: $299.99 Special Price: $249.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[DHK Hunter SCT 1/10 RTR 4x4 Short Course - w/Battery/Charger]]> http://www.hobbypeople.net/index.php/dhk-hunter-sct-1-10-rtr-4wd-short-course-w-batt-charger.html

DHK Hunter SCT 1/10 RTR

4WD Short Course Truck w/ Battery and Charger

Rugged. Refined. Right.

Only DHK has put so many high-performance features in a truck anyone can drive. The rugged Hunter 4x4 Short-Course Truck (SCT) is ready for anyone looking to get a durable, easy-to-operate truck in a complete ready-to-run (RTR) package. Extremely fun to drive, the Hunter SCT is set to impress beginners and experts alike.

Drive it in the dirt. Drive it on the pavement. Drive it ANYWHERE! The ultra-stiff double-deck chassis and mid-motor design provides better balance, aggressive steering, and suspension performance that's race-ready for any surface! Full-time four-wheel-drive puts the power to the ground with awesome traction. Large impact-absorbing bumpers protects the Hunter during big jumps and even those not-so-perfect landings. Over sized threaded shocks, adjustable turnbuckles, adjustable differentials and numerous after market compatible parts gives the Hunter SCT endless options for tuning, adjustment, and customization for every driving style. No matter what you throw at it, the Hunter's right on target.

Universal drive axles, large bore shocks, completely adjustable turnbuckles, and an aluminum upper deck really make the Hunter SCT truck stand out from other short course trucks in this class.  After a year of testing all of these components, DHK has made sure the Hunter trucks are worry free and simply fun to drive.  Bash with friends or take your DHK Hunter SCT to the local track and compete!  With so many adjustments, anyone can set up the Hunter SCT trucks to accommodate their driving style.

Get the rugged DHK Hunter SCT and you'll know you've made the right decision!

Features

• Complete Package with 2.4GHz Radio, NiMH Battery, Charger

• Standardized wheel hexes and short course body. (After market wheels and bodies readily fit.)

• 4WD Mid-Motor Chassis Layout

• Adjustable Oil filled Coil-Over Shocks

• Adjustable turnbuckles

• Large, impact absorbing front and rear bumpers

Specifications

• Length: 22” (558.8mm) from bumper to bumper

• Width: 12.2” (310mm)

• Height: 7.68” (195mm)

• Wheelbase: 13” (330mm)

• Radio: DHK 2.4Ghz Pistol Grip

• Steering Servo: 3kg

• Weight: 6.10 lbs (2.76kg)

• ESC: Brushed 45A

• Motor: Brushed 550 size

• Battery: 7.2V 1800mAh 20C NiMH

• Charger: AC Input Charger

• Speed: 20 MPH

Price: $219.99 Special Price: $159.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[DHK Maximus RTR 1/8 4WD BL Monster Truck (4S)]]> http://www.hobbypeople.net/index.php/dhk-maximus-rtr-1-8-4wd-bl-monster-truck-4s.html

DHK Maximus Monster Truck

Ready-To-Run 1/8 4WD Brushless

Number 1 in 1/8th EP RTR Value!

The big Maximus 1/8th-scale Monster Truck is a complete package that is fast, fun, and durable. Take control of your Maximus  Monster Truck with the easy-to-use DHK 2.4G radio and drive at over 50 MPH with the included 4S LiPo battery (2s x 2). The Maximus features oil-filled all-metal shocks and all-metal shock towers. The suspension is adjustable and durable. It's all mounted to a metal chassis with a double-deck top-plate providing a super-stiff platform to improve both handling and reliability on the big jumps!

 DHK has redefined the RTR 1/8th-scale category with their innovative RC trucks and buggies. DHK is small on price but big on features.  From the ground up, DHK had the backyard basher and experienced enthusiast in mind. The Maximus  Monster Truck  has advanced suspension adjustments and geometry providing a chassis design that can be precisely tuned for any track setup. And when you're ready to fly off the big jumps, the Maximus is ready too, with durable plush suspension and the power to catch BIG AIR. The monster truck is set up to never let you down. Durability, adjustability, simplicity. DHK Maximus is the right choice for 1/8th-scale EP performance.

Maximus Monster Truck Features

• Complete Package with Radio, LiPo Battery, Charger

• High-Power Brushless Motor and ESC Combo

• 4WD 3-Diff Competition Chassis Layout

• All-Metal Coil-Over Shocks

• 50+ MPH

Maximus Monster Truck Specifications

• Length: 19.5” (497mm)

• Width: 15.3” (389mm)

• Height: 7.1” (181mm)

• Wheelbase: 13.78” (350mm)

• Weight: 7.3lbs (3.32kg)

• ESC: 80A Brushless

• Motor 2260kv 11.1V

• Batteries: 2 x 7.4V 3200mAh LiPo

• Steering Servo: 9kg Metal Gear

• Radio: DHK 2.4G Pistol Grip

• Charger: AC Input LiPo Balance Charger

• Speed: 50+ MPH

Price: $449.99 Special Price: $399.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[DHK Pistol Grip Computer Radio, 2.4GHz w/ Receiver]]> http://www.hobbypeople.net/index.php/dhk-pistol-grip-computer-radio-2-4ghz-w-receiver.html This is the DHK Pistol Grip 2.4GHz Computer Radio and Receiver for DHK vehicles

Price: $74.99 Special Price: $59.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[DHK Raz-R BL RTR 1/10 4WD ST - No Battery/Charger]]> http://www.hobbypeople.net/index.php/dhk-raz-r-bl-rtr-1-10-4wd-st-no-battery-or-charger.html

DHK Raz-R Brushless 1/10 Stadium Truck 

RTR 4WD Offroad Truck w/ 2.4 GHz Radio

The DHK RAZ-R BL 1/10th-scale brushless stadium truck has all of the great features you need in a RTR package. Brushless power system and fully adjustable suspension with good ground clearance make the RAZ-R BL an easy choice. The brushless power system shoots the DHK RAZ-R BL truck to speeds of 45mph from a standstill, and with the oil filled, coil-over suspension it can easily soak up rough terrain and drive smoothly through it.

Over sized axles, large bore shocks, completely adjustable turnbuckles, and an aluminum upper deck really make the DHK RAZ-R BL truck stand out from other 1/10 scale stadium trucks. DHK understands that trucks need to be durable and perform well. Stronger components were inlcuded in the construction of DHK trucks and buggies to provide worry free driving and a greater customer satisfaction. With these great features, it's easy to see why the DHK RAZ-R BL brushless stadium truck is a great choice for anyone looking to get a ready to run truck with awesome speed, handling, and reliability.

 DHK RAZ-R BL Features:

• Brushless Motor and ESC Combo

• 4WD Mid Motor Chassis Layout

• Adjustable Coil-Over Shocks

• Adjustable turnbuckles

DHK RAZ-R BL Specifications

• Length: 18.00” (459mm)

• Width: 11.8” (300mm)

• Height: 7.28” (185mm)

• Wheelbase: 11.4” (290mm)

• Weight: 4.75lbs (2.15kg)

• ESC: Brushless 35A

• Motor: Brushless 3970kv

• Steering Servo: 6kg

• Radio: DHK 2.4Ghz Pistol Grip

• Speed: 35+ MPH

Price: $259.99 Special Price: $219.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[DHK Raz-R RTR 1/10 4WD w/Ni-MH Battery Stadium Truck]]> http://www.hobbypeople.net/index.php/dhk-raz-r-1-10-4wd-brushed-stadium-truck-w-ni-mh-battery.html

DHK Raz-R 4WD Truck 

RTR 1/10 Brushed Stadium Truck w/ 2.4 G Radio, NiMH Battery, and Charger

The DHK RAZ-R RTR 1/10th-scale stadium truck is a complete package that all entry-level enthusiasts can appreciate. DHK has made sure that certain areas of the truck are durable enough for anyone. Many parts are even borrowed from bigger 1/8th-scale platforms! With large coil-over shocks, over-sized ball bearings, strong drive train, large drive axles, composite chassis, aluminum upper chassis plates and shock towers, the DHK RAZ-R truck is sure to withstand harsh driving conditions while allowing the driver to control the vehicle with ease.

An entry-level vehicle should be fast enough to enjoy, but not too fast where the user can't control it. DHK understands this and provides an electronic speed control with forward and reverse, and a motor that is well suited for learning. Everyone can enjoy the DHK RAZ-R stadium truck with its great looks and stout suspension. With increased ground clearance, the DHK RAZ-R is able to tear up most terrain it encounters and drive through it with ease thanks to the 4WD drive system. The large-bore coil-over shocks soak up the obstacles and jumps, and allow the DHK RAZ-R truck to conquer these with ease. The differentials and shocks are also oil-filled which allows the user to tune them for different terrain and make sure the RAZ-R is adaptable to various conditions. A complete package, the DHK RAZ-R 4WD stadium truck is sure to please new hobbyists with endless fun!

 DHK RAZ-R Features:

• Complete Package with 2.4G Radio, NiMH Battery, Charger

• Electronic Speed Control and Motor Combo

• 4WD Mid-Motor Chassis Layout

• Adjustable Coil-Over Shocks

• Adjustable turnbuckles

DHK RAZ-R Specifications

• Length: 18.00” (459mm)

• Width: 11.8” (300mm)

• Height: 7.28” (185mm)

• Wheelbase: 11.4” (290mm)

• Weight: 4.90lbs (2.22kg)

• ESC: Brushed 45A

• Motor: Brushed 550

• Battery:  7.2V 1800mAh NiMH

• Steering Servo: 6kg

• Radio: DHK 2.4G Pistol Grip

• Charger: AC Input NiMH Charger

• Speed: 20+ MPH

Price: $199.99 Special Price: $159.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[DHK Wolf 1/10 4WD RTR Buggy w/NiMH Batt & Charger]]> http://www.hobbypeople.net/index.php/dhk-wolf-1-10-4wd-brushed-buggy-w-ni-mh-battery.html

DHK Wolf 4WD Buggy 

RTR 1/10 Brushed Buggy w/ 2.4 GHz Radio, NiMH Battery, and Charger

The DHK Wolf 1/10th-scale buggy is a complete package that all entry-level enthusiasts can appreciate. DHK has made sure that certain areas of the buggy are durable enough for anyone. Many parts are even borrowed from bigger 1/8th-scale platforms! With large coil-over shocks, strong drive train, large drive axles, composite chassis, aluminum upper chassis plates and shock towers, the DHK Wolf is sure to withstand harsh driving conditions while allowing the driver to control the vehicle with ease.

An entry-level vehicle should be fast enough to enjoy, but not too fast where the user can't drive it. DHK understands this and provides an electronic speed control with forward and reverse, and a motor that is well-suited for learning in the DHK Wolf. Everyone can enjoy the DHK Wolf buggy with its great looks and over-sized axles. With 4WD, the DHK Wolf is able to tear up most terrain it encounters and drive through it with ease thanks to the mounted knobby tires. The large-bore coil-over shocks soak up the obstacles and jumps, and allow the DHK Wolf to take on these with ease. The shocks are also oil-filled which allows the user to tune them for different terrain and make sure the DHK Wolf buggy is adaptable to various conditions. A complete package, the DHK Wolf buggy is sure to please new hobbyists and not let them down!

Features:

• Complete Package with 2.4G Radio, NiMH Battery, Charger

• Electronic Speed Control and Motor Combo

• 4WD Mid-Motor Chassis Layout

• Adjustable Coil-Over Shocks

• Adjustable turnbuckles

Specifications

• Length: 17.91” (455mm)

• Width: 10.24” (260mm)

• Height: 6.89” (175mm)

• Wheelbase: 11.5” (292mm)

• Weight: 4.55lbs (2.06kg)

• ESC: Brushed 45A

• Motor: Brushed 550

• Battery: 7.2V 1800mAh NiMH

• Steering Servo: 3kg

• Radio: DHK 2.4G Pistol Grip

• Charger: AC Input NiMH Charger

• Speed: 20+ MPH

Price: $189.99 Special Price: $119.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[DHK Wolf BL RTR 1/10 4WD Buggy - No Battery/Charger]]> http://www.hobbypeople.net/index.php/dhk-wolf-bl-rtr-1-10-4wd-buggy-no-battery-or-charger.html

DHK Wolf BL Buggy 

RTR 1/10 4WD Brushless Buggy w/ 2.4 GHz Radio

The DHK Wolf BL 1/10th-scale brushless buggy has all of the great features you need in a RTR package. Brushless power system and fully adjustable suspension make the DHK Wolf BL buggy an easy choice. The powerful brushless system rockets the DHK Wolf BL buggy to amazing speeds from a standstill, and with the oil filled, coil-over suspension it can easily soak up rough terrain and drive smoothly through it.

Over sized axles, shocks, completely adjustable turnbuckles, and an aluminum upper deck really make the DHK Wolf BL stand out from other 1/10 scale buggies. DHK understands that trucks and buggies need to be durable and perform well. Stronger components were used in the construction of the DHK trucks and buggies to provide worry free driving and a great customer satisfaction. With these great features, it's easy to see why the DHK Wolf BL brushless buggy is a great choice for anyone looking to get a ready to run offroad vehicle that has awesome speed, handling, and reliability.

Features:

• Brushless Motor and ESC Combo

• 4WD Mid Motor Chassis Layout

• Adjustable Coil-Over Shocks

• Adjustable turnbuckles

Specifications

• Length: 17.91” (455mm)

• Width: 10.24” (260mm)

• Height: 6.89” (175mm)

• Wheelbase: 11.5” (292mm)

• Weight: 4.30lbs (1.95kg)

• ESC: Brushless 35A

• Motor: Brushless 3970kv

• Steering Servo: 3kg

• Radio: DHK 2.4Ghz Pistol Grip

• Speed: 35+ MPH

Price: $249.99 Special Price: $219.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[DHK Zombie 8e RTR 1/8 4WD BL Truck - No Battery or Charger]]> http://www.hobbypeople.net/index.php/dhk-zombie-8e-rtr-1-8-4wd-bl-truck-no-battery-or-charger.html

DHK Zombie 8e RTR 1/8 4WD Brushless Truck

Get ready for the Zombie Apocolypse. The DHK Zombie 8e - Number 1 in 1/8th-Scale EP RTR Value!

The big Zombie 8e 1/8th-scale Monster Truck is a complete package that is fast, fun, and durable. Take control of your Zombie 8e Monster Truck with the easy-to-use DHK 2.4GHz radio and drive at over 40 MPH. The Zombie 8e features oil-filled all-metal shocks and all-metal shock towers. The suspension is adjustable and durable. It's all mounted to a metal chassis with a double-deck top-plate providing a super-stiff platform to improve both handling and reliability on the big jumps!

DHK has redefined the RTR 1/8th-scale category with their innovative R/C trucks and buggies. DHK is small on price but big on features!  From the ground up, DHK had the backyard basher and experienced enthusiast in mind. The Zombie 8e Monster Truck has advanced suspension adjustments and geometry providing chassis design that can be precisely tuned for any track setup. And when you're ready to fly off the big jumps, the Zombie 8e is ready too, with durable plush suspension and the power to catch BIG AIR. The monster truck is setup to never let you down. Durability, adjustability, simplicity. DHK Zombie 8e is the right choice for 1/8th-scale EP performance.

DHK Zombie 8e Features

• High-Power Brushless Motor and ESC Combo

• 4WD 3-Diff Competition Chassis Layout

• All-Metal Coil-Over Shocks

• 40+ MPH

DHK Zombie 8e Specifications

• Length: 19.5” (497mm)

• Width: 15.3” (389mm)

• Height: 7.1” (181mm)

• Wheelbase: 12.9” (330mm)

• Weight: 7.3lbs (3.32kg)

• ESC: 80A Brushless

• Motor 2260kv 11.1V

• Steering Servo: 9kg Metal Gear

• Radio: DHK 2.4Ghz Pistol Grip

• Speed: 40+ MPH

Price: $369.99 Special Price: $319.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Dubro #6 x 3/4'' Socket Head Sheet Metal Screws]]> http://www.hobbypeople.net/index.php/dubro-6-x-3-4-socket-head-sheet-metal-screws.html

Price: $1.94 Special Price: $1.16

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Dubro 4 x 1 Button Head Sheet Metail Screws (8)]]> http://www.hobbypeople.net/index.php/dubro-4-x-1-button-head-sheet-metail-screws-8.html

Price: $1.94 Special Price: $1.16

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Dubro 6 x 3/4 Button Head Sheet Metal Screws (8)]]> http://www.hobbypeople.net/index.php/dubro-6-x-3-4-button-head-sheet-metal-screws-8.html

Price: $1.99 Special Price: $1.00

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Dubro 8-32 x 1-1/2'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-8-32-x-1-1-2-socket-head-cap-screws-4.html

Price: $1.68 Special Price: $1.01

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Dubro 8-32 x 1/2'' Socket Head Cap Screws (4)]]> http://www.hobbypeople.net/index.php/dubro-8-32-x-1-2-socket-head-cap-screws-4.html

Price: $1.10 Special Price: $0.66

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Dubro No. 10 Split Washer (8)]]> http://www.hobbypeople.net/index.php/dubro-no-10-split-washer-8.html

Price: $0.99 Special Price: $0.59

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Dubro No. 6 Nylon Flat Washer (8)]]> http://www.hobbypeople.net/index.php/dubro-no-6-nylon-flat-washer-8.html

Price: $1.10 Special Price: $0.66

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Dubro No. 8 Nylon Flat Washer (8)]]> http://www.hobbypeople.net/index.php/dubro-no-8-nylon-flat-washer-8.html

Price: $1.10 Special Price: $0.66

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Estes Taser Flying Model Rocket Launch Set]]> http://www.hobbypeople.net/index.php/estes-taser-flying-model-rocket-launch-set.html

Estes Taser Launch Set

Includes Electron Beam Launch Controller and Porta-Pad II Launch Pad!

This is an Estes Taser Launch Set. The Taser is a stunning rocket that's capable of subduing anything out there that's dangerous! The Taser Launch Set from Estes is an exciting, radically designed high-altitude rocket launch set from the E2X (Easy to Assemble) series. The rocket kit features a brightly colored one piece body tube, molded plastic fin set and bullet shaped nose cone. Simply glue a few rocket pieces together, apply the colorful self-stick decals and in less than an hour you'll be ready for the launch pad!

The Taser rocket is 16.5 inches tall. With its custom three-fin design, it climbs to an outta sight altitude of over 1,000 feet. A bright-colored 12 inch preassembled parachute returns this rocket back to the launch site. You'll be ready in minutes for another extreme launch experience!

Features and Specifications:

• Kit Type: E2X (Easy to Assemble)

• Length: 16.5in (41.9cm)

• Diameter: .98in (25mm)

• Estimated Weight: 1.5oz (42.5g)

• Plastic Fins, Self-Stick Decals and 12 Inch Parachute

• Recommended Engines (NOT included): A8-3 (First Flight), B4-4, B6-4, B6-6, C6-5 and C6-7 (NOT included)

• Projected Maximum Altitude: 1000ft (305m)

Estes model rocketry is recommended for ages 10 and up with adult supervision for those under 12. Unless otherwise specified, all models require assembly. Tools, construction and finishing supplies sold separately. In order to launch, a launch system, model rocket engines, igniters and recovery wadding are required - sold separately-unless otherwise specified.

Price: $26.49 Special Price: $21.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[FlyFly Hobby FW-190 EPO Plane PNP (sx/motor/esc incld)]]> http://www.hobbypeople.net/index.php/flyfly-hobby-fw-190-epo-plane-pnp-sx-motor-esc-incld.html

FlyFly Hobby Focke-Wulf FW-190

RxR Plug-N-Play EPO Fighter

This is a FlyFly Hobby Focke-Wulf FW-190 RxR Plug-N-Play EPO Fighter. This model is molded from strong EPO foam and assembled and painted for that scale look. Aircraft comes prebuilt and ready for your transmitter, receiver and LiPo battery. Includes micro servos, brushless outrunner motor and ESC. FlyFly Hobby models are hand-crafted with quality components, well-built and great flying.

Features:

• Molded From Durable But Lightweight EPO Foam

• Painted in Scale Color Scheme with Many Scale Details

• Prebuilt and Ready for Your Transmitter, Receiver and LiPo Battery

• Quick Final Assembly

• Quality Components, Well-Built and Great Flying

Specifications:

• Material: EPO Foam

• Wingpsan: 1400mm (55.12in)

• Weight: 1800g (3.96lbs)

• Length: 1100mm (43.30in)

• Wing Area: 35dm2 (3.77ft2)

Includes:

•12 x 9 3-Blade Propeller

• 600kv Brushless Outrunner Motor

• 45A Brushless ESC

• 4x Micro Servos

Items Required, But Not Included:

• 4-Channel or More 2.4GHz Radio and Receiver

• 4S 14.8V 2200mAh 20C LiPo Battery

• AC or AC/DC LiPo Balance Charger

Price: $249.99 Special Price: $166.53

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[FlyFly Hobby FW-190 EPO RTF 2.4G Mode 2]]> http://www.hobbypeople.net/index.php/fw-190-epo-rtf-2-4ghz-mode-2.html

FlyFly Hobby Focke-Wulf FW-190

RTF EPO Fighter with 2.4GHz Radio - Mode 2

This is a FlyFly Hobby Focke-Wulf FW-190 RTF EPO Fighter with 2.4GHz Radio - Mode 2. This model is molded from strong EPO foam and assembled and painted for that scale look. Aircraft is ready-to-fly and includes a 2.4GHz radio, micro servos, brushless outrunner motor, ESC, 4S Li-Po battery and charger! FlyFly Hobby are hand-crafted with quality components, well-built and great flying.

Specifications:

• Material: EPO Foam

• Wingpsan: 1400mm (55.12in)

• Weight: 1800g (3.96lbs)

• Length: 1100mm (43.30in)

• Wing Area: 35dm2 (3.77ft2)

Includes:

• 2.4GHz 4ch Radio

•12 x 9 3-Blade Propeller

• 14.8v 2200mAh 20c 4s Li-Po Battery

• Battery charger

• 600kv Brushless Outrunner Motor

• 45A Brushless ESC

• 4x Micro Servos

Price: $349.99 Special Price: $213.85

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD Electron 6ch Receiver – Fut J, Neg Shift. Req Hitec Xtal]]> http://www.hobbypeople.net/index.php/hitec-rcd-electron-6ch-receiver-fut-j-neg-shift-req-hitec-xta.html

Price: $19.98 Special Price: $9.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-50 – ATX (Old) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-50-atx-old-plug.html

Hitec HS-50 Super Feather

 Micro Servo (ATX Plug)

This is a Hitec HS-50 Super Feather Micro Servo (ATX Plug). The name says it all! The HS-50, Super Feather Servo is a modern miracle of miniaturization. Featuring precision components that have been engineered to provide long lasting trouble free service, the HS-50 is the perfect choice for any micro application from indoor R/C and hand launch gliders to ultra small electric park and yard flyers.

Specifications:

• Torque at 4.8v: 8.0oz-in (0.58kg-cm)

• Speed at 4.8v: 0.09sec/60º

• Weight: 0.21oz (5.95g)

• Dimensions: 0.82 x 0.44 x 0.86in (20.8 x 11.2 x 21.8mm)

• Gear Train: Plastic

• Bushing/Ball Bearing: None

• Motor Type: 3-Pole

• Connector Type: ATX (Old Style Black Airtronics Plug)

*This Servo Is Designed for Use with 4.8 Volts Only*

Price: $9.98 Special Price: $4.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-50 – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-50-fut-j-plug.html

Hitec HS-50 Super Feather

 Micro Servo (Futaba J Plug)

This is a Hitec HS-50 Super Feather Micro Servo (Futaba J Plug). The name says it all! The HS-50, Super Feather Servo is a modern miracle of miniaturization. Featuring precision components that have been engineered to provide long lasting trouble free service, the HS-50 is the perfect choice for any micro application from indoor R/C and hand launch gliders to ultra small electric park and yard flyers.

Specifications:

• Torque at 4.8v: 8.0oz-in (0.58kg-cm)

• Speed at 4.8v: 0.09sec/60º

• Weight: 0.21oz (5.95g)

• Dimensions: 0.82 x 0.44 x 0.86in (20.8 x 11.2 x 21.8mm)

• Gear Train: Plastic

• Bushing/Ball Bearing: None

• Motor Type: 3-Pole

• Connector Type: Futaba J

*This Servo Is Designed for Use with 4.8 Volts Only*

Price: $9.98 Special Price: $4.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-50 – Hitec/JR/Z-ATX (new) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-50-hitec-jr-z-atx-new-plug.html

Hitec HS-50 Super Feather

 Micro Servo (Hitec/JR/Airtronics Z Plug)

This is a Hitec HS-50 Super Feather Micro Servo (Hitec/JR/Airtronics Z Plug). The name says it all! The HS-50, Super Feather Servo is a modern miracle of miniaturization. Featuring precision components that have been engineered to provide long lasting trouble free service, the HS-50 is the perfect choice for any micro application from indoor R/C and hand launch gliders to ultra small electric park and yard flyers.

Specifications:

• Torque at 4.8v: 8.0oz-in (0.58kg-cm)

• Speed at 4.8v: 0.09sec/60º

• Weight: 0.21oz (5.95g)

• Dimensions: 0.82 x 0.44 x 0.86in (20.8 x 11.2 x 21.8mm)

• Gear Train: Plastic

• Bushing/Ball Bearing: None

• Motor Type: 3-Pole

• Connector Type: Hitec/JR/Airtronics Z

*This Servo Is Designed for Use with 4.8 Volts Only*

Price: $9.98 Special Price: $4.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-545BB – ATX (Old) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-545bb-atx-old-plug.html

Hitec HS-545BB

High-Torque Ball Bearing Servo (ATX Plug)

This is a Hitec HS-545BB High-Torque Ball Bearing Servo (ATX Plug). The HS-545 is a high torque servo that features a high performance 5-pole motor. Toss in a ball bearing and oilite bushing supported output shaft and the results are ultra-smooth operation and precise centering. 

Specifications:

• Torque at 4.8v: 61.1oz-in (4.4kg-cm)

• Torque at 6.0v: 76.4oz-in (5.5kg-cm)

• Speed at 4.8v: 0.22sec/60º

• Speed at 6.0v: 0.17sec/60º

• Weight: 1.57oz (44.5g)

• Dimensions: 1.56 x 0.77 x 1.41in (39.6 x 19.6 x 35.8mm)

• Gear Train: Plastic

• Bushing/Ball Bearing: Single Ball Bearing

• Motor Type: 5-Pole

• Connector Type: ATX (Old Style Airtronics Black Plug)

Price: $9.98 Special Price: $4.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-5965MG – Hitec/JR/Z-ATX (new) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-5965mg-hitec-jr-z-atx-new-plug.html

Price: $89.99 Special Price: $45.00

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-5975HB – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-5975hb-fut-j-plug.html

Price: $79.99 Special Price: $40.00

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-5975HB – Hitec/JR/Z-ATX (new) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-5975hb-hitec-jr-z-atx-new-plug.html

Price: $79.99 Special Price: $40.00

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-60 – ATX (Old) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-60-atx-old-plug.html

Hitec HS-60

Super Micro Servo (ATX Plug)

This is a Hitec HS-60 Super Micro Servo (ATX Plug). The HS-60 Super Micro servo is ideal for use in small park flyers and lightweight sport sailplanes, where a small servo is required.

Specifications:

• Torque at 4.8v: 15.4oz-in (1.1kg-cm)

• Torque at 6.0v: 18.0oz-in (1.3g-cm)

• Speed at 4.8v: 0.20sec/60º

• Speed at 6.0v: 0.16sec/60º

• Weight: 0.48oz (13.5g)

• Dimensions: 1.00 x 0.50 x 0.90in (25.4 x 12.7 x 22.9mm)

• Gear Train: Plastic

• Bushing/Ball Bearing: Bushing

• Motor Type: 3-Pole

• Connector Type: ATX (Old Style Airtronics Black Plug)

Price: $9.98 Special Price: $4.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-6965HB – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-6965hb-fut-j-plug.html

Hitec HS-6965HB Karbonite

Ultra-Speed Digital Ball Bearing Coreless Servo (Futaba JPlug)

This is a Hitec HS-6965HB Karbonite Ultra-Speed Digital Ball Bearing Coreless Servo (Futaba J Plug). One of the Karbonite digital servo series, the HS-6965HB is the fastest available. Providing a blinding fast .08 transit speed, instant torque and fantastic holding power, this servo is perfect for high performance heli tail rotor applications. Also ideal for aircraft up to 72” or up to 12 pounds when using just one servo per control surface.

Specifications:

• Torque at 4.8v: 91.6oz-in (6.6kg-cm)

• Torque at 6.0v: 111.0oz-in (7.9kg-cm)

• Speed at 4.8v: 0.10sec/60º

• Speed at 6.0v: 0.08sec/60º

• Weight: 1.83oz (52.0g)

• Dimensions: 1.57 x 0.78 x 1.45in (39.9 x 19.8 x 36.8mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Futaba J

Price: $69.98 Special Price: $34.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-6965HB – Hitec/JR/Z-ATX (new) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-6965hb-hitec-jr-z-atx-new-plug.html

Hitec HS-6965HB Karbonite

Ultra-Speed Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug)

This is a Hitec HS-6965HB Karbonite Ultra-Speed Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug). One of the Karbonite digital servo series, the HS-6965HB is the fastest available. Providing a blinding fast .08 transit speed, instant torque and fantastic holding power, this servo is perfect for high performance heli tail rotor applications. Also ideal for aircraft up to 72” or up to 12 pounds when using just one servo per control surface.

Specifications:

• Torque at 4.8v: 91.6oz-in (6.6kg-cm)

• Torque at 6.0v: 111.0oz-in (7.9kg-cm)

• Speed at 4.8v: 0.10sec/60º

• Speed at 6.0v: 0.08sec/60º

• Weight: 1.83oz (52.0g)

• Dimensions: 1.57 x 0.78 x 1.45in (39.9 x 19.8 x 36.8mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Hitec/JR/Airtronics Z

Price: $69.98 Special Price: $34.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-6975HB – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-6975hb-fut-j-plug.html

Hitec HS-6975HB Karbonite

High-Speed Digital Ball Bearing Coreless Servo (Futaba J Plug)

This is a Hitec HS-6975HB Karbonite High-Speed Digital Ball Bearing Coreless Servo (Futaba J Plug). The HS-6975HB is technology at its finest. Ultra smooth, wicked fast and very powerful are word to describe this new servo. When you compare the performance with the price, you can understand why this servo is quickly becoming a favorite among high performance pilots. The Karbonite gears are virtually wear-free and provide up to 4 times the strength of nylon gears. The HS-6975HB is also extremely easy to program. Ideal for use in 1/10th monster trucks, 1/8th buggies and truggies and high performance aircraft up to 35 percent.

Specifications:

• Torque at 4.8v: 119.4oz-in (8.6kg-cm)

• Torque at 6.0v: 144.4oz-in (10.4kg-cm)

• Speed at 4.8v: 0.13sec/60º

• Speed at 6.0v: 0.10sec/60º

• Weight: 1.83oz (52.0g)

• Dimensions: 1.57 x 0.78 x 1.45in (39.9 x 19.8 x 36.8mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Futaba J

Price: $79.98 Special Price: $39.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-6975HB – Hitec/JR/Z-ATX (new) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-6975hb-hitec-jr-z-atx-new-plug.html

Hitec HS-6975HB Karbonite

High-Speed Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug)

This is a Hitec HS-6975HB Karbonite High-Speed Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug). The HS-6975HB is technology at its finest. Ultra smooth, wicked fast and very powerful are word to describe this new servo. When you compare the performance with the price, you can understand why this servo is quickly becoming a favorite among high performance pilots. The Karbonite gears are virtually wear-free and provide up to 4 times the strength of nylon gears. The HS-6975HB is also extremely easy to program. Ideal for use in 1/10th monster trucks, 1/8th buggies and truggies and high performance aircraft up to 35 percent.

Specifications:

• Torque at 4.8v: 119.4oz-in (8.6kg-cm)

• Torque at 6.0v: 144.4oz-in (10.4kg-cm)

• Speed at 4.8v: 0.13sec/60º

• Speed at 6.0v: 0.10sec/60º

• Weight: 1.83oz (52.0g)

• Dimensions: 1.57 x 0.78 x 1.45in (39.9 x 19.8 x 36.8mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Hitec/JR/Airtronics Z

Price: $79.98 Special Price: $39.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-6985HB – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-6985hb-fut-j-plug.html

Hitec HS-6985HB Karbonite

High-Torque Digital Ball Bearing Coreless Servo (Futaba J Plug)

This is a Hitec HS-6985HB Karbonite High-Torque Digital Ball Bearing Coreless Servo (Futaba J Plug). Utilizing the new revolutionary "Karbonite” gear train. Karbonite is four times stronger than our standard nylon gears and even after hundreds of thousands of cycles it will not show any signs of wear . With dual ball bearing and powerful motor, the HS-6985HB offers plenty of torque and speed, and features improved centering and resolution thanks its new custom I.C.

Specifications:

• Torque at 4.8v: 144.0oz-in (10.3kg-cm)

• Torque at 6.0v: 172.0oz-in (12.3kg-cm)

• Speed at 4.8v: 0.16sec/60º

• Speed at 6.0v: 0.13sec/60º

• Weight: 1.82oz (51.6g)

• Dimensions: 1.57 x 0.79 x 1.50in (39.9 x 20.1 x 38.1mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Futaba J

Price: $59.98 Special Price: $29.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-6985HB – Hitec/JR/Z-ATX (new) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-6985hb-hitec-jr-z-atx-new-plug.html

Hitec HS-6985HB Karbonite

High-Torque Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug)

This is a Hitec HS-6985HB Karbonite High-Torque Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug). Utilizing the new revolutionary "Karbonite” gear train. Karbonite is four times stronger than our standard nylon gears and even after hundreds of thousands of cycles it will not show any signs of wear . With dual ball bearing and powerful motor, the HS-6985HB offers plenty of torque and speed, and features improved centering and resolution thanks its new custom I.C.

Specifications:

• Torque at 4.8v: 144.0oz-in (10.3kg-cm)

• Torque at 6.0v: 172.0oz-in (12.3kg-cm)

• Speed at 4.8v: 0.16sec/60º

• Speed at 6.0v: 0.13sec/60º

• Weight: 1.82oz (51.6g)

• Dimensions: 1.57 x 0.79 x 1.50in (39.9 x 20.1 x 38.1mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Hitec/JR/Airtronics Z

Price: $59.98 Special Price: $29.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-715BB – ATX (Old) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-715bb-atx-old-plug.html

Hitec HS-715BB

Ball Bearing Sail Winch Servo (ATX Plug)

This is a Hitec HS-715BB Ball Bearing Sail Winch Servo (ATX Plug). This sail winch servo is ideally suited for 2-meter size sail boats. Includes 4.7 Inch (120mm) long servo arm.

Specifications:

• Torque at 4.8v: 161.1oz-in (11.6kg-cm)

• Torque at 6.0v: 201.4oz-in (14.5kg-cm)

• Speed at 4.8v: 0.25sec/60º

• Speed at 6.0v: 0.19sec/60º

• Weight: 3.59oz (101.8g)

• Dimensions: 2.32 x 1.14 x 2.04in (58.9 x 28.9 x 51.8mm)

• Gear Train: Plastic

• Bushing/Ball Bearing: Single Ball Bearing

• Motor Type: 3-Pole

• Connector Type: ATX (Old Style Airtronics Black Plug)

Price: $24.98 Special Price: $12.49

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-715BB – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-715bb-fut-j-plug.html

Hitec HS-715BB

Ball Bearing Sail Winch Servo (Futaba J Plug)

This is a Hitec HS-715BB Ball Bearing Sail Winch Servo (Futaba J Plug). This sail winch servo is ideally suited for 2-meter size sail boats. Includes 4.7 Inch (120mm) long servo arm.

Specifications:

• Torque at 4.8v: 161.1oz-in (11.6kg-cm)

• Torque at 6.0v: 201.4oz-in (14.5kg-cm)

• Speed at 4.8v: 0.25sec/60º

• Speed at 6.0v: 0.19sec/60º

• Weight: 3.59oz (101.8g)

• Dimensions: 2.32 x 1.14 x 2.04in (58.9 x 28.9 x 51.8mm)

• Gear Train: Plastic

• Bushing/Ball Bearing: Single Ball Bearing

• Motor Type: 3-Pole

• Connector Type: Futaba J

Price: $24.98 Special Price: $12.49

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-765HB – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-765hb-fut-j-plug.html

Hitec HS-765HB Karbonite

Sail Control Servo (Futaba J Plug)

This is a Hitec HS-765HB Karbonite Sail Control Servo (Futaba J Plug). The HS-765HB sail arm servo has up to 140 degrees of travel and comes with a Heavy Duty 4.5 inch arm. With its dual ball bearing supported output shaft the HS-765HB will provide years of reliable service for your R/C sailing applications to 2 meters.

Specifications:

• Torque at 4.8v: 153.0oz-in (11.0kg-cm)

• Torque at 6.0v: 183.0oz-in (13.2kg-cm)

• Speed at 4.8v: 0.28sec/60º

• Speed at 6.0v: 0.23sec/60º

• Weight: 3.88oz (110g)

• Dimensions: 2.32 x 1.14 x 1.96in (58.9 x 28.9 x 49.7mm)

• Gear Train: Karbonite

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: 3-Pole

• Connector Type: Futaba J

Price: $39.98 Special Price: $19.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-925MG - Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-925mb-fut-j-plug.html

Hitec HS-925MG Metal Gear

High-Speed Ball Bearing Coreless Servo (Futaba J Plug)

This is a Hitec HS-925MG Metal Gear High-Speed Ball-Bearing Coreless Servo (Futaba J Plug). This servo uses Hitec's unique metal gear train and coreless motor technology. The powerful HS-925MG is perfect for those high-demand applications requiring a standard-size servo.

Specifications:

• Torque at 4.8v: 66.7oz-in (4.80kg-cm)

• Torque at 6.0v: 106.9oz-in (7.70kg-cm)

• Speed at 4.8v: 0.20sec/60º

• Speed at 6.0v: 0.11sec/60º

• Weight: 2.00oz (56.7g)

• Dimensions: 1.55 x 0.78 x 1.48in (39.4 x 19.8 x 37.6mm)

• Gear Train: Metal

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Futaba J

Price: $59.98 Special Price: $29.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-925MG – ATX (Old) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-925mg-atx-old-plug.html

Hitec HS-925MG Metal Gear

High-Speed Ball Bearing Coreless Servo (ATX Plug)

This is a Hitec HS-925MG Metal Gear High-Speed Ball Bearing Coreless Servo (ATX Plug). This servos uses Hitec's unique metal gear train and coreless motor technology. The powerful HS-925MG is perfect for those high demand applications requiring a standard sized servo.

Specifications:

• Torque at 4.8v: 66.7oz-in (4.80kg-cm)

• Torque at 6.0v: 106.9oz-in (7.70kg-cm)

• Speed at 4.8v: 0.20sec/60º

• Speed at 6.0v: 0.11sec/60º

• Weight: 2.00oz (56.7g)

• Dimensions: 1.55 x 0.78 x 1.48in (39.4 x 19.8 x 37.6mm)

• Gear Train: Metal

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: ATX Plug (Old Style Airtronics Black Plug)

Price: $59.98 Special Price: $29.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HS-925MG – Hitec/JR/Z-ATX (new) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hs-925mg-hitec-jr-z-atx-new-plug.html

Hitec HS-925MG Metal Gear

High-Speed Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug)

This is a Hitec HS-925MG Metal Gear High-Speed Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug). This servos uses Hitec's unique metal gear train and coreless motor technology. The powerful HS-925MG is perfect for those high demand applications requiring a standard sized servo.

Specifications:

• Torque at 4.8v: 66.7oz-in (4.80kg-cm)

• Torque at 6.0v: 106.9oz-in (7.70kg-cm)

• Speed at 4.8v: 0.20sec/60º

• Speed at 6.0v: 0.11sec/60º

• Weight: 2.00oz (56.7g)

• Dimensions: 1.55 x 0.78 x 1.48in (39.4 x 19.8 x 37.6mm)

• Gear Train: Metal

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Hitec/JR/Airtronics Z

Price: $59.98 Special Price: $29.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HSC-5996TG – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hsc-5996tg-fut-j-plug.html

Hitec HS-5996TG Titanium Gear

High-Speed Digital Ball Bearing Coreless Servo (Futaba J Plug)

This is a Hitec HS-5996TG Titanium Gear High-Speed Digital Ball Bearing Coreless Servo (Futaba J Plug). This servo features a programmable digital amplifier, long life coreless motor with heat-sink case and super strong titanium gears. It's ideally suited for 1/10th scale cars and trucks, where high speed precision and durability are a must.

Specifications:

• Torque at 4.8v: 83.3oz-in (6.0kg-cm)

• Torque at 6.0v: 111.1oz-in (8.0kg-cm)

• Speed at 4.8v: 0.13sec/60º

• Speed at 6.0v: 0.10sec/60º

• Weight: 2.19oz (62.0g)

• Dimensions: 1.58 x 0.79 x 1.46in (40.0 x 20.0 x 37.0mm)

• Gear Train: Titanium

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Futaba J

Price: $99.98 Special Price: $49.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HSC-5996TG – Hitec/JR/Z-ATX (new) Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hsc-5996tg-hitec-jr-z-atx-new-plug.html

Hitec HS-5996TG Titanium Gear

High-Speed Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug)

This is a Hitec HS-5996TG Titanium Gear High-Speed Digital Ball Bearing Coreless Servo (Hitec/JR/Airtronics Z Plug). This servo features a programmable digital amplifier, long life coreless motor with heat-sink case and super strong titanium gears. It's ideally suited for 1/10th scale cars and trucks, where high speed precision and durability are a must.

Specifications:

• Torque at 4.8v: 83.3oz-in (6.0kg-cm)

• Torque at 6.0v: 111.1oz-in (8.0kg-cm)

• Speed at 4.8v: 0.13sec/60º

• Speed at 6.0v: 0.10sec/60º

• Weight: 2.19oz (62.0g)

• Dimensions: 1.58 x 0.79 x 1.46in (40.0 x 20.0 x 37.0mm)

• Gear Train: Titanium

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Hitec/JR/Airtronics Z

Price: $99.98 Special Price: $49.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD HSC-5998TG – Fut J Plug]]> http://www.hobbypeople.net/index.php/hitec-rcd-hsc-5998tg-fut-j-plug.html

Hitec HS-5998TG Titanium Gear

High-Torque Digital Ball Bearing Coreless Servo (Futaba J Plug)

This is a Hitec HS-5998TG Titanium Gear High-Torque Digital Ball Bearing Coreless Servo (Futaba J Plug). This servo features a programmable digital amplifier, long life coreless motor with heat-sink case and super strong titanium gears. It's ideally suited for 1/8th scale cars and trucks, where high torque and durability are a must.

Specifications:

• Torque at 4.8v: 195.0oz-in (14.04kg-cm)

• Torque at 6.0v: 250.0oz-in (18.00kg-cm)

• Speed at 4.8v: 0.23sec/60º

• Speed at 6.0v: 0.19sec/60º

• Weight: 2.19oz (62.0g)

• Dimensions: 1.58 x 0.79 x 1.46in (40.0 x 20.0 x 37.0mm)

• Gear Train: Titanium

• Bushing/Ball Bearing: Dual Ball Bearing

• Motor Type: Coreless

• Connector Type: Futaba J

Price: $69.98 Special Price: $34.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD Micro 555 5ch Receiver – ATX(old) Pos Shift, Req Hitec X]]> http://www.hobbypeople.net/index.php/hitec-rcd-micro-555-5ch-receiver-atx-old-pos-shift-req-hitec.html

Price: $15.98 Special Price: $7.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hitec/RCD Supreme 7ch Receiver – ATX(old) Pos Shift. Req Hitec Xta]]> http://www.hobbypeople.net/index.php/hitec-rcd-supreme-7ch-receiver-atx-old-pos-shift-req-hitec-xt.html

Price: $17.98 Special Price: $8.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby Boss 1/72 P-51D Mustang]]> http://www.hobbypeople.net/index.php/hobby-boss-1-72-p-51d-mustang.html

Hobby Boss 1/72 P-51D Mustang The North American P-51 D was truly a "fighter pilot's dream." It is perhaps the best known fighter aircraft of all time. Designed in record time at the request of the British in 1940, the Mustang possessed a deadly combination of speed, endurance, maneu-verability and firepower. By the end of the Mustang's production run more than 15,000 P-51s had been built and the aircraft had seen service around the world as an escort fighter, fighter/ bomber, dive bomber, reconnaissance aircraft, and finally, a race plane.

Price: $9.99 Special Price: $7.49

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People 11.1V 1300mAh (3S) 30C LiPo Battery - T-Conn]]> http://www.hobbypeople.net/index.php/hobby-people-11-1v-1300mah-3s-30c-lipo-battery-t-conn.html

Hobby People 11.1V 3S 1300mAh 30C LiPo Battery

w/ T-Connector

This is the Hobby People 11.1V 3S 1300mAh 30C LiPo Battery with a T-Connector. While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

• Pack Dimensions: 19 x 31 x 88 mm

• Weight: 105g

• Plug: T-Connector

Price: $14.99 Special Price: $9.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People 11.1V 2200mAh (3S) 30C LiPo Battery - T-Conn]]> http://www.hobbypeople.net/index.php/hobby-people-11-1v-2200mah-3s-30c-lipo-battery-t-conn.html

Hobby People 11.1V 3S 2200mAh 30C LiPo Battery

W/ T-Connector

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

• Pack Dimensions: 25 x 35 x 104 mm

• Weight: 175g

• Plug: T-Connector

Price: $16.99 Special Price: $12.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People 11.1V 3200mAh (3S) 30C LiPo Battery - T-Conn]]> http://www.hobbypeople.net/index.php/hp-mdl-11-1v-3200mah-3s-30c-lipo-battery-t-conn.html

Hobby People 11.1V 3S 3200mAh 30C LiPo Battery

W/ T-Connector

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

• Pack Dimensions: 22 x 43 x 135 mm

• Weight: 250g

• Plug: T-Connector

Price: $32.99 Special Price: $24.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People 11.1V 3S 3200mAh 20C Car Battery LiPo Hard Case T-Conn]]> http://www.hobbypeople.net/index.php/hobby-people-11-1v-3200mah-20c-car-battery-lipo-hard-case-t-conn.html

HP-MDL 11.1V 3200mAh 20C Li-Po Car Battery

Hard Case with T-Connector

This is the HP-MDL 11.1V 3200mAh 20C Li-Po Car Batttery Pack with Hard Case and T-Connectors. While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance.

This affordable 3S Li-Po Battery Pack is perfect for R/C Cars. With it's good run time, reliability, and high quality you will be getting more bang for your buck!

Specifications:

• Pack Dimensions: 23.5 x 46.5 x 138.5 mm (0.9 x 1.8 x 5.5 in)

• Weight: 280 g (9.9 ounces)

• Plug: T-Conn

Price: $49.99 Special Price: $39.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People 11.1V 4500mAh (3S) 30C LiPo Battery]]> http://www.hobbypeople.net/index.php/hobby-people-11-1v-4500mah-3s-30c-lipo-battery.html

Hobby People 11.1V 3S 4500mAh 30C LiPo Battery

W/ No Plugs

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

• Pack Dimensions: 25 x 43 x 135 mm

• Weight: 310g

• Plug: No Plug

Price: $46.99 Special Price: $34.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People 18.5V 4500mAh (5S) 30C LiPo Battery]]> http://www.hobbypeople.net/index.php/hobby-people-18-5v-4500mah-5s-30c-lipo-battery.html

Hobby People 18.5V 5S 4500mAh 30C LiPo Battery

W/ No Plug

While other companies are offering lithium polymer batteries you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best LiPo's. This is why Hobby People offers a brand of LiPo batteries at economy prices with higher than economy performance. With a high and honest C rating of 30C, this is the LiPo battery you have been waiting for.

Specifications:

• Pack Dimensions: 42 x 43 x 135 mm

• Weight: 530g

• Plug: No Plug

Price: $69.99 Special Price: $53.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People 7.4V 5000mAh 35C Car Battery LiPo Hard Case 4mm]]> http://www.hobbypeople.net/index.php/hobby-people-7-4v-5000mah-35c-car-lipo.html

Hobby People 2S 7.4V 5000mAh 35C

Hard Case LiPo Battery with T-Connector and Standard Balance Plug

This is a Hobby People 2S 7.4V 5000mAh 35C Hard Case LiPo Battery with T-Connector and Standard Balance Plug. This 35C LiPo car pack from Hobby People features 4mm gold-plated power inputs, a hard case suitable for racing, performance Lithium Polymer cells and a wire harness with T-connector and standard balance lead.

A race pack at a reasonable price! While other companies are offering the products you need at a price too high to afford, Hobby People works hard to bring you the best deals on the best products. This is why Hobby People offers a brand of batteries at economy prices with higher-than-economy performance.

Features:

• High Discharge Rates

• Up To 3C Charge Rates

• Performance Lithium Polymer Cells

• Standard Balance Tap Plug

• Quality Assembly With Proper Size And Type Lead Wire

• Honest Quality At A Great Price

Specifications:

• Length: 5.44in (138mm)

• Width: 1.83in (46.6mm)

• Height: 0.92in (23.4mm)

Price: $49.99 Special Price: $34.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People ESC - Brushless, 30A 2-3S LiPo Air/Heli Programmable]]> http://www.hobbypeople.net/index.php/hp-mdl-esc-brushless-30a-2-3s-lipo-air-programmable.html

Hobby People 30 Amp Aircraft Brushless ESC

Hobby People, The brand you know and trust, now offers a complete line of Quality Aircraft Brushless ESC's! Whether you are looking for a small ESC for Indoor flying or a high performance upgrade Speed Control for a RTF Aircraft, Hobby People has you covered! To make everything much easier, each Speed Control is programmable using the same HP Electronics Programming Card (118608-sold separately). Easily change ESC parameters to customize your ESC to a particular apllication or motor. And for added convenience, each ESC is already wired with the most common plug type for it's size. If your looking for the right ESC for you, look no further!

This is a Hobby People 30 Amp Aircraft Brushless ESC. This is a high-quality, yet affordable motor controller that is designed specifically for use in both aircraft and helicopters. This sensorless brushless ESC is fully programmable and features adjustable low voltage cutoff, adjustable motor timing, multiple startup options and more. It can be powered with 2 to 3S LiPo cells or 6 to 9 NiCd/NiMH cells and is capable of delivering up to 30 amps continuous current. A 2.0 amp linear BEC, 18 AWG motor wires with 3.5mm bullet connectors and 16 AWG battery wires with a male T-Connector round out this ESC’s great features.

Features:

• High-Quality Components and Operating Firmware

• Sensorless Design for Use with Aircraft and Helicopters

• Adjustable Low Voltage Cutoff, Over-Heat Protection, Signal Loss Protection and Safe-Start

• Fully Programmable Via Transmitter or Programming Card (Available Separately)

Specifications:

• Input Voltage: 2 to 3S LiPo Cells or 6 to 9 NiCD/NiMH Cells

• Maximum Continuous Current: 30 Amps (with Airflow Cooling) / 40 Amps Burst Current for 10 Seconds

• BEC: 2.0A/5V Linear

• Weight (without Wires): 0.81oz (23g)

• Dimensions: 1.65 x 0.98 x 0.31in (42.0 x 25.0 x 8.0mm)

Programming Modes:

• Brake

• Battery Type

• Cutoff Type

• Cutoff Voltage

• Timing Mode

• Start Mode

• Governor Mode

• Motor Direction

• Default Restore

Price: $24.99 Special Price: $14.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People G-46 BL Power System (Motor/ESC/5S Battery)]]> http://www.hobbypeople.net/index.php/hp-mtr-g-46-brushless-power-system-motor-esc-batt.html

HP-MTR G-46 BL Power System (Motor/ESC/5S Battery)

We wanted to take away the guess work for customers and to make a power system that is reliable and affordable. The Hobby People G-46 Power System allows you to experience the same power as one would expect from a 46-52 two-stroke/70 four-stroke. Swing an APC 10x6 Prop (regular, not electric) at 10,000+ RPM. Many 65-70 four-strokes struggle with that. We fly this combo with a 13x6 and also with a 13x8E propeller. This motor also flies with a 14x7E APC prop for bigger planes with more drag.

The motor and ESC come wired with 4mm gold-plated bullet connectors, so there is no soldering to get these items to all work together!  The ESC connects to the battery with a T-Connector.

Finally, customers can buy a complete electric system for less money than the equivalent four-stroke! Convenient, Easy, Reliable. Hobby People has taken the work and expense out of airplane electric conversions!

ESC Features:

• High-Quality Components and Operating Firmware

• Sensorless Design for Use with Aircraft and Helicopters

• Adjustable Low Voltage Cutoff, Over-Heat Protection, Signal Loss Protection and Safe-Start

• Fully Programmable Via Transmitter or Programming Card (Available Separately)

ESC Specifications:

• Input Voltage: 2-6S LiPo Cells or 6-18 NiCd/NiMH Cells

• Maximum Continuous Current: 80 Amps (with Airflow Cooling)

• BEC: 5.0A/5V

• Weight (without Wires): 2.89oz (82g)

• Dimensions: 3.25 x 1.43 x 0.56in (82.5 x 36.3 x 14.2mm)

ESC Program Options:

• Brake

• Battery Type

• Cutoff Type

• Cutoff Voltage

• Timing Mode

• Start Mode

• Governor Mode

• Motor Direction

• And Default Restore

Motor Specifications:

• Battery: 3-5S LiPo or 8-16 NiMH Cells

• Maximum Continuous Current: 65 Amps / 70 Amps Surge for 30 Seconds

• Kv: 650 (RPM/V)

• Recommended Propellers:

w/4S 4500-5000mAh LiPo - 12x10, 13x8 or 14x8

w/5S 4500-5000mAh LiPo - 12x8, 13x6, 13x8 or 14x7

• Recommended ESC: 80Amp ESC or Similar

• Weight: 230g

• Diameter: 42mm

• Length: 50mm

• Shaft Size: 5mm

• 4mm Male Gold Bullet Connectors Installed

Battery Specifications:

• Pack Dimensions: 42 x 43 x 135 mm

• Weight: 530g

• Plug: T-Connector

Price: $179.99 Special Price: $159.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People HP-A9N Light Micro Analog Servo]]> http://www.hobbypeople.net/index.php/hobby-people-hp-a9n-light-micro-analog-servo.html

Hobby People HP-A9N

Light Micro Analog Servo

The Hobby People HP-A9N light micro servo is perfect for park flyers or slow flyer aircraft (great for foamies too). The Hobby People servo line is the epitome of the Hobby People philosophy, giving you the best for less. These servos are economically priced, but with better than economy performance. When you need a light weight, micro servo for your aircraft, turn to Hobby People.

Specifications

• Weight: 9.5g (.53oz)

• Speed @ 4.8V: 0.11 sec

• Speed @ 6V: 0.09 sec

• Torque @ 4.8V: 1.3 Kg-cm (18 oz-in)

• Torque @ 6V: 1.5 Kg-cm (20.8 oz-in)

• Dimensions (mm): 22.9 x 12 x 27

• Dimensions (in): 0.9 x 0.48 x 10.6

Price: $6.99 Special Price: $4.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People P-47 Thunderbolt EP Rx-R w/ Retracts BL (No Tx/Rx/Bt/Ch)]]> http://www.hobbypeople.net/index.php/hp-mdl-p-47-thunderbolt-ep-rx-r-w-retracts-bl-no-tx-rx-bt-ch.html

Hobby People P-47 Thunderbolt EP

Receiver-Ready w/Retracts

This is a Hobby People P-47 Thunderbolt EP Receiver-Ready w/Retracts. The largest and heaviest single-engine fighter of WWII, the P-47 was heavily armed for its role as a long-range fighter-bomber. The later-model bubble-top versions came to be known as the "Superbolts" by pilots in the field. Bubble canopies allowed superior visibility in combat and the Superbolts also offered many other refinements, and had overall improved performance over the earlier Razorback models.

The Hobby People P-47 Thunderbolt in "Sleepy Jean the 3rd" colors respectfully recreates that feeling of high-performance in a model that has beautiful scale lines and details with a great power system. The included brushless motor, and ESC and scale-looking 4-blade propeller give a power-to-weight ratio of over 1:1 with a 3S 1600-2200mAh LiPo battery. The mechanically-retractable main landing gear is factory-installed and ready to use, and the EPO molded foam airframe is factory-finished and detailed for a superior scale look that will turn heads!

Features:

• EPO Molded Foam Construction, Painted with Scale Details and Decals Applied

• One-Piece Wing with Dual Aileron Servos for Precise Control

• Belly Pan is Held in Place with Magnetic Latches to Allow Easy Battery Access

• Mechanical Main Landing Gear Retracts with Landing Gear Doors and Steerable Tail Wheel

• Scale-Looking 11x10 4-Blade Propeller with Scale-Looking Spinner

• 3536 Size 800kv Brushless Motor and 11.1V 50 Amp Brushless ESC

• Servos Installed with Control Linkages Ready for Final Setup Adjustments

• Provisions for Optional Flaps Add to Scale Detail (Optional P-47 Flap Conversion Kit Available Separately)

• Great Flight Characteristics

• Scale Looks Both on the Ground and in the Air

Specifications:

• Wingspan: 41.0 inches (1041mm)

• Wing Area: 288.0 square inches (18.58sq.dm)

• Length: 35.5 inches (902mm)

• Weight (Approximately): 36.0 Ounces (1021g)

• Wing Loading: 18.0 Oz/SqFt (54.9g/sq.dm)

Items Required, But Not Included:

• 5 to 6-Channel or More Transmitter with Mini or Micro Full-Range Receiver

• 3S 11.1V 1600-2200mAh LiPo Battery

• AC or AC/DC LiPo Balance Charger

• Double-Sided Foam Tape

• 5-Minute Epoxy

• Basic Modeling Tools and Supplies

Price: $159.99 Special Price: $99.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People P-51D Mustang 1.2M w/Retracts RTF (2.4G/BL)]]> http://www.hobbypeople.net/index.php/hobby-people-p-51d-mustang-1-2m-w-retracts-rtf-2-4g-bl.html

Hobby People P-51D Mustang EP

Ready-to-Fly Brushless EPO Foam Aircraft w/Retracts & 2.4GHz Radio

This is a Hobby People P-51D Mustang EP Ready-to-Fly Brushless EPO Foam Aircraft w/Retracts & 2.4G Radio. This spectacular Hobby People model of the famous P-51D Mustang rings with scale accuracy. The design truly captures the P-51D's famous outline, enough to impress even scale modelers. With retracts and retract doors, in flight it gives that gear-up look that makes low passes truly impressive. Look closely at the Hobby People P-51D and you'll see scale panel lines and even markings for the formation lights. It's topped off with enough brushless power to swing a big scale spinner and 4-blade prop. This Ready-to-Fly version includes a 6-channel 2.4G radio. In no time you'll be flying a top-notch Mustang with the right looks and flying performance to impress even the most experienced R/C pilots.

Features:

• EPO Molded Foam Construction

• Scale Details and Painted Scale Color Scheme with Decals Applied

• One-Piece Wing with Electric Main Gear Retracts and Dual Aileron Servos for Precise Control

• Detailed Canopy with Pilot and Cockpit is Held in Place with Magnetic Latches to Allow Easy Battery Access

• Steerable Mechanical Retractable Tail Wheel with Landing Gear Doors

• Custom 4-Bladed Propeller with Custom Spinner

• 35-48 Size 760KV Brushless Motor and 11.1V 50 Amp Brushless ESC

• 11.1V 2200mAh 20C LiPo Battery and DC Balance Charger

• Servos and Control Linkages are Installed and Ready for Final Setup Adjustments

• 6-Channel 2.4G FHSS-1 Transmitter and Receiver

Specifications:

• Wingspan 49.0 in (1245mm)

• Length 40.5 in (1029mm)

• Wing Area 410 sq in (26.45sq.dm)

• Weight (Approx) 3.0 Lbs (1361g)

• Wing Loading 16.9 oz/sq ft (51.44g/sq.dm)

What's Included:

• P-51D Mustang EP RTF with Brushless Motor, Brushless ESC, Servos and Retracts

• 6-Channel 2.4G Transmitter and Receiver

• 3S 11.1V 2200mAh 20C LiPo Battery

• DC LiPo Balance Charger

• Custom Spinner and 4-Blade Propeller

• Radiator Scoop and Accessories Bag

Items Required, But Not Included:

• 4 'AA' Batteries for Transmitter

• Basic Modeling Tools and Supplies

Price: $249.99 Special Price: $199.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People P-51D Mustang 1.2M w/Retracts Rx-Ready]]> http://www.hobbypeople.net/index.php/hobby-people-p-51d-mustang-1-2m-w-retracts-rx-ready.html

Hobby People P-51D Mustang EP

Receiver-Ready Brushless EPO Foam Aircraft w/Retracts

This is a Hobby People P-51D Mustang EP Receiver-Ready Brushless EPO Foam Aircraft w/Retracts. This spectacular Hobby People model of the famous P-51D Mustang rings with scale accuracy. The design truly captures the P-51D's famous outline, enough to impress even scale modelers. With retracts and retract doors, in flight it gives that gear-up look that makes low passes truly impressive. Look closely at the Hobby People P-51D and you'll see scale panel lines and even markings for the formation lights. It's topped off with enough brushless power to swing a big scale spinner and 4-blade prop. This Receiver-Ready version only requires that you add your favorite 5-channel or more transmitter, receiver, and 2200 mAH battery. In no time you'll be flying a top-notch Mustang with the right looks and flying performance to impress even the most experienced R/C pilots.

Features:

• EPO Molded Foam Construction

• Scale Details and Painted Scale Color Scheme with Decals Applied

• One-Piece Wing with Electric Main Gear Retracts and Dual Aileron Servos for Precise Control

• Detailed Canopy with Pilot and Cockpit is Held in Place with Magnetic Latches to Allow Easy Battery Access

• Steerable Mechanical Retractable Tail Wheel with Landing Gear Doors

• Custom 4-Bladed Propeller with Custom Spinner

• 35 -48 Size 760KV Brushless Motor and 11.1V 50 Amp Brushless ESC

• Servos and Control Linkages are Installed and Ready for Final Setup Adjustments

Specifications:

• Wingspan 49.0 in (1245mm)

• Length 40.5 in (1029mm)

• Wing Area 410 sq in (26.45sq.dm)

• Weight (Approx) 3.0 Lbs (1361g)

• Wing Loading 16.9 oz/sq ft (51.44g/sq.dm)

What's Included:

• P-51D Mustang EP RTF with Brushless Motor, Brushless ESC, Servos and Retracts

• Custom Spinner and 4-Blade Propeller

• Radiator Scoop and Accessories Bag

Items Required, But Not Included:

• 5-Channel or More 2.4G Transmitter and Receiver*

• 11.1v 2200 mAh LiPo and compatible charger.

• Basic Modeling Tools and Supplies

*Requires 6-channel or more transmitter and receiver if you install the optional flaps. Optional Flap Conversion Kit available separately.

Price: $189.99 Special Price: $149.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People Super Cub Micro - Front Yard Flyer RTF 2.4GHz]]> http://www.hobbypeople.net/index.php/hobby-people-super-cub-micro-front-yard-flyer-rtr-2-4ghz.html

Hobby People Micro Super Cub

Ready-to-Fly Front Yard Flyer w/2.4GHz Radio

Now You Can Truly Fly in Your Front Yard!

This is a Hobby People Micro Super Cub Ready-to-Fly Front Yard Flyer w/2.4GHz Radio. Fly anywhere there’s low to no-wind conditions. This 2.4GHz-controlled Micro-sized Super Cub gets you flying anywhere, anytime. The Super Cub is factory-built and ready to fly. Just install 4 ‘AA’ batteries, charge the LiPo flight battery and you’re ready to fly! The rudder and elevator are controlled by proportional magnetic actuators, and the micro-geared motor system provides plenty of power for a great flying Cub you’ll want to fly again and again.

Features:

• Great Flight Characteristics in a Small Package

• Quality Construction and Components

• Micro Gear-Drive Power System with 3.2 x 2.8 Propeller

• Proportional Magnetic Actuators Control the Elevator and Rudder

• 2.4GHz 3-Channel Transmitter w/Built-In LiPo Battery Charger & Adjustable Trims

• Completely Factory-Built and Ready-to-Fly - Just Add Transmitter Batteries

Specifications:

• Wingspan: 13.7 Inches (348mm)

• Wing Area: 29.1 Square Inches (1.88sq.dm.)

• Length: 9.3 Inches (236mm)

• Weight: 0.42 Ounces (12g)

What's Included:

• Assembled Micro Super Cub

• 3-Channel 2.4GHz Transmitter

• 1S 3.7V 35mAh LiPo Battery

• Replacement Propeller

• User's Guide

Items Required, But Not Included:

• 4 'AA' Alkaline Batteries for Transmitter

Price: $69.99 Special Price: $59.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People Superfly X Receiver Ready - Bl Motor/Lipo/Ailerons No Tx]]> http://www.hobbypeople.net/index.php/hobby-people-superfly-x-receiver-ready-bl-motor-lipo-ailerons-no-tx.html

Hobby People Superfly X

4-Channel Receiver-Ready Brushless Aileron Trainer

This is a Hobby People Superfly X 4-Channel Receiver-Ready Brushless Aileron Trainer. The Superfly X is the easy way to get flying. Enjoy the performance only brushless power can provide, with the precision of added ailerons. This Receiver-Ready version includes everything except the transmitter and receiver.

The Superfly X is a durable EPO-foam airplane that's easily transported due to its 2-piece wing. Even the canopy is easy-access with factory-installed magnets. The model flies smoothly due to its generous tail surface area and modern wing shape. You'll have a Sunday-flyer just about any pilot would enjoy. The Superfly X is the easy way to get a go-anywhere, have-fun park flyer light enough and small enough for the AMA Park-Pilot program, all for an easy price. Get the Superfly X from Hobby People Model.

Features:

•  Prebuilt and Ready to Install Your Own Receiver

• High-Performance 4-Channel Elevator, Aileron, Rudder and Throttle Control

•  Includes 2630 Size 1050kV Brushless Motor

• Includes 4-Blade Propeller

• Includes 11.1 Volt 20 Amp Brushless ESC

• Includes Four Installed Micro Servos

• Includes 3S 1500mAh Li-Po Battery and DC Balance Charger

Specifications:

• Wing Span: 54.5in (1384mm)

• Wing Area: 350sq.in (22.58sq.dm)

• Length: 35.5in (902mm)

• Flying Weight: 26oz  (737g)

• Wing Loading: 10.7oz/sq.ft (32.64g/sq.dm)

• Brushless Motor:

• 2630 size

• 11.1V rated

• 1050KV

• Max Continuous current: 15A

• Weight: 58g

• Brushless ESC:

• Input Voltage 11.1 Volts

• Continuous Current: 20 Amps

Items Required, But Not Included:

• 4-Channel or More Transmitter and Receiver (AeroSport 5-Channel 2.4GHz FHSS-1 or Similar)

• 1 oz. Bottle of Foam-Safe Thick C/A

• 1.5mm Hex Wrench, # 1 Philips Head Screwdriver, Scissors, Ruler and Double-Sided Foam Tape

Price: $159.99 Special Price: $139.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People Superfly X RTF Trainer- Brushed, 3-Ch 2.4Ghz Radio]]> http://www.hobbypeople.net/index.php/hobby-people-superfly-x-rtf-sport-brushed-3-ch-2-4ghz-radio.html

Hobby People Superfly X

Ready to Fly Sport Plane with 3-Ch 2.4GHz Radio

The Superfly X from Hobby People is the easy way to get flying. Our entry-level RTF is affordable, fun, simple, and  a great flyer. It's a perfect place to start for new pilots. This plane is completely ready-to-fly, and features a brushed motor and 2.4GHz radio for elevator, rudder and motor control. This means that all you need to do is charge the included NiMH battery and you're in the air.

Also available are the high-performance Receiver-Ready and Kit versions. These versions feature a brushless motor and ailerons. Enjoy the performance only brushless power can provide, with the precision of added ailerons.

The Receiver-Ready version includes everything except the transmitter and receiver.

For the do-it-yourself modeler, get the affordable kit! The custom brushless motor and unique 4-blade propeller are included. The rest of the equipment and the finish is up to you.

No matter which version you choose, you'll have a durable EPO airplane that's easily transported due to its 2-piece wing. Even the canopy has easy access with factory-installed magnets. The model flies smoothly due to its generous tail surface area and modern wing shape. You'll have a Sunday-flyer just about any pilot would enjoy. The Superfly X is easy way to get a go-anywhere, have-fun park flyer light enough and small enough for the AMA Park-Pilot program, all for an easy price. Get the Superfly X from Hobby People Model.

Specifications

• Wing Span: 54.5in – 1384mm

• Wing Area: 350 sq. in. 22.58 sq. dm.

• Length: 35.5in – 902mm

• Flying Weight: 26oz – 737g

• Wing Loading: 10.7 oz/sq.ft. – 32.64 g/sq.dm.

• Brushed Motor: 480 size, 6.0V rated

• Brushed ESC: 8.4V (nimh/nicd 7-cell) 10amp

Price: $179.99 Special Price: $149.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People Waco Biplane EP RTF 2.4G BL]]> http://www.hobbypeople.net/index.php/hp-mdl-waco-biplane-ep-rtf-2-4g-bl.html

HP-MDL Waco Biplane EP RTF 2.4G BL

Waco Biplane - Golden Age Beauty.

Everyone loves a biplane! And, this biplane is absolutely stunning! The Hobby People Waco Biplane makes a perfect small-field flyer. The generous wing area and light wing loading give it spectacular low speed handling. You'll find this Waco unusually forgiving. Up front, the brushless power system gives this bipe just the right amount of power for great scale flight maneuvers with power to spare. Look just like the real-thing as you pull through big loops and rolls just like barnstormers of yesteryear. And you can fly with unusual precision as this Waco has solid linkage and a separate servos for the right and left wing halves, NO torque rods to bend or flex.

Of course, this is a factory- finished EPO foam model with the motor, esc, and servos installed. So, whether you get the Rx-R or RTF version, you can be flying this beautifully finished model in less time that it takes to charge the battery.

Fly with style, Fly the Hobby People Waco Bipe.

Waco Biplane EP Specifications

• Top Wing Span: 39in - 991mm

• Bottom Wing Span: 35.5in - 902mm

• Total Wing Area: 454.4sq.in. - 29.32sq.dm.

• Length Overall: 31in - 787mm

• Weight RTF: 32oz – 907g

• Wing Loading: 10.1oz/sq.ft. - 30.9g/sq.dm.

• Functions: Aileron, Elevator, Rudder, Throttle

• Power System: Brushless Motor and ESC with 3S Li-Po Battery

Waco Biplane EP Features

• Molded EPO Foam, Factory Finished

• Scale Outline and Detailed

• Dedicated Battery Hatch

• Durable Dual-Wire Landing Gear with Gear Cover and Wheel Pants

• Servos Factory Installed.

• 2-Blade Scale Spinner and Prop Hub

• Steerable Tail Wheel

Includes Waco Biplane Electric Powered with Brushless Motor & Esc, Li-PO Battery & Charger, 2.4GHz Radio. All Installed and Ready to Fly.

Price: $239.99 Special Price: $179.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People Waco Biplane EP Rx-R BL (No Tx/Rx/Bat/Chgr)]]> http://www.hobbypeople.net/index.php/hp-mdl-waco-biplane-ep-rx-r-bl-no-tx-rx-bat-chgr.html

HP-MDL Waco Biplane EP Rx-R BL

Waco Biplane - Golden Age Beauty.

Everyone loves a biplane! And, this biplane is absolutely stunning! The Hobby People Waco Biplane makes a perfect small-field flyer. The generous wing area and light wing loading give it spectacular low speed handling. You'll find this Waco unusually forgiving. Up front, the brushless power system gives this bipe just the right amount of power for great scale flight maneuvers with power to spare. Look just like the real-thing as you pull through big loops and rolls just like barnstormers of yesteryear. And you can fly with unusual precision as this Waco has solid linkage and a separate servos for the right and left wing halves, NO torque rods to bend or flex.

Of course, this is a factory- finished EPO foam model with the motor, esc, and servos installed. So, whether you get the Rx-R or RTF version, you can be flying this beautifully finished model in less time that it takes to charge the battery.

Fly with style, Fly the Hobby People Waco Bipe.

Waco Biplane EP Specifications

• Top Wing Span: 39in - 991mm

• Bottom Wing Span: 35.5in - 902mm

• Total Wing Area: 454.4sq.in. - 29.32sq.dm.

• Length Overall: 31in - 787mm

• Weight RTF: 32oz – 907g

• Wing Loading: 10.1oz/sq.ft. - 30.9g/sq.dm.

• Functions: Aileron, Elevator, Rudder, Throttle

• Power System: Brushless Motor and ESC with 3S Li-Po Battery

Waco Biplane EP Features

• Molded EPO Foam, Factory Finished

• Scale Outline and Detailed

• Dedicated Battery Hatch

• Durable Dual-Wire Landing Gear with Gear Cover and Wheel Pants

• Servos Factory Installed.

• 2-Blade Scale Spinner and Prop Hub

• Steerable Tail Wheel

Waco Biplane Electric Powered with Brushless Motor & Esc Included. Transmitter, Receiver, Battery, and Charger Not Included (Sold Separately).

Price: $159.99 Special Price: $129.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People Watt Meter - In-Line, Volts, Curr, Watts, Energy]]> http://www.hobbypeople.net/index.php/hobby-people-watt-meter-in-line-volts-curr-watts-energy.html

Hobby People Watt Meter

Power System Measuring Device

This is a Hobby People Watt Meter Power System Measuring Device. The Watt Meter is a device for measuring and calculating a number of different electrical parameters related to your electric modeling needs. From determining the best propeller to use with your brushless power system to achieve the best performance, to being able to monitor ESC and BEC efficiencies, battery health and servo load, the Watt Meter can do it - and more! When connected between your power source and the component your measuring, the Watt Meter displays all relevant information in real time, on an easy to read 2-line LCD screen. It’s small, lightweight and best of all, its easy to use!

Features:

• Measures Voltage, Current (Amps), Charge (Amp Hours), Power (Watts) and Energy (Watt Hours)

• Measures Peak Amps, Peak Watts and Voltage Minimum (Sag)

• Use to Measure and Achieve the Best Performance From Your Power System

• Use to Measure the Current Draw of Your Receiver and Servos

• Use to Monitor the Charge/Discharge Capacity of Your Batteries, Plus Much More!

• Powering with an Optional Receiver Battery Allows Voltage Measurements Down to 0 Volts

• Accurate and Precise - 0.01 A Current and 0.01 V Voltage Resolutions

• Handles 50 A Continuous Current and Up to 100 A Surge Current at 60 V

• 14 AWG Silicone Rubber Insulated Super-Fine Stranded Source and Load Wires

• Lightweight, High-Strength Plastic Case

• Factory-Calibrated and Easy to Use - Just Add Your Connectors

Specifications:

• Voltage Range: 0 to 60 V @ 0.01 V (4.0 Volts Minimum without Optional Receiver Battery)

• Current Range: 0 to 100 A Peak @ 0.01 A (50 Amps Continuous)

• Power Range: 0 to 6554 W @ 0.1 W

• Charge Range: 0 to 65 A @ 0.001 Ah

• Engergy Range: 0 to 6554 Wh @ 0.1 Wh

• Measurement Update Period: 400 ms

• Data Queue Sequence Time: 2 Seconds

• In Circuit Resistance: 0.001 Ohms

• Operating Current: 7 mA

• Auxiliary Power Voltage: 4.0 to 6.0 V (Optional Receiver Battery)

• Dimensions: 2.8 x 1.7 x 0.83 Inches (71.1 x 43.2 x 21.0mm)

• Weight (w/o Connectors): 2.3 Ounces (65.2g)

Items Required, But Not Included:

• Power Connectors to Match Your Components to Be Measured*

*The connectors should be of sufficient quality to handle the current and voltage expected from your different components.

Price: $26.99 Special Price: $19.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People Zero EP RTF w/Retracts 2.4G BL]]> http://www.hobbypeople.net/index.php/hp-mdl-zero-ep-rtf-w-retracts-2-4g-bl.html

Hobby People Mitsubishi A6M Zero EP

Ready-to-Fly w/Retracts, 2.4GHz Radio, LiPo Battery & Charger

This is a Hobby People Mitsubishi A6M Zero EP Ready-to-Fly w/Retracts, 2.4GHz Radio, LiPo Battery & Charger. No Japanese WWII figher is more well-known than the Mitsubishi A6M Zero (Official Allied reporting name was the “Zeke”). Active throughout WWII, it was considered the most capable carrier-based fighter in the world. And, with its wide gear stance and low wing loading, it was one of the easiest to fly. The Hobby People A6M Zero EP retains those great flight characteristics in a 1/12th scale flying model that is fun and exciting to fly.

The airframe has panel lines, scale exhaust positions, guns and even a painted canopy. These scale details, along with a scale paint scheme, give the Hobby People A6M Zero EP scale good looks normally reserved for larger wood aircraft. It's ultra-quick to assemble too. Just glue on the tail, bolt on the wing and prop, charge the battery and you're ready to fly!

In the air, you'll get that great scale look that only comes from retracts! The A6M Zero EP has simple mechanical retracts that are installed and adjusted at the factory. No mess, no fuss, just throw the switch and you'll have gear-up flight realism! The tail wheel is steerable too, so you can taxi out and back just like the big boys. Top to bottom, tip to tip, the A6M Zero EP has the looks and performance you expect from a modern ready-to-fly foam aircraft.

Features:

• Molded Foam Construction, Prepainted with Extensive Scale Details and Decals Applied

• One-Piece Wing with Dual Aileron Servos for Precision Control

• Mechanical Main Gear Retracts with Landing Gear Doors

• Steerable Tail Wheel

• Painted Canopy, Magnet Retained

• Easy Access Battery Compartment

• Custom 11 x 10 3-Blade Propeller with Custom Spinner Finishes Off the Scale Look

• 3536 Size 800kV Brushless Motor and 11.1 Volt 50 Amp Brushless ESC

• 3S 11.1V 1650mAh LiPo Battery and DC Balance Charger

• Servos Installed with Control Linkages Ready for Final Setup Adjustments

• 6-Channel 2.4GHz FHSS Transmitter and 6-Channel Micro Receiver

• Transmitter Features Low-Power Range Check Mode and Fail Safe on the Four Main Channels

• Great Flight Characteristics

• Scale Looks Both on the Ground and in the Air

Specifications:

• Wingspan: 39.75 Inches (1010mm)

• Length: 32.75 Inches (832mm)

• Wing Area: 265 Square Inches (17.10sq.dm)

• Weight RTF (Approximately): 32 Ounces (905g)

• Wing Loading: 17.4 Ounces/Square Foot (53.0g/sq.dm)

Items Required, But Not Included:

• 4 'AA' Alkaline Batteries for Transmitter

• Foam-Safe C/A Glue

• Basic Modeling Tools

Price: $239.99 Special Price: $199.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Hobby People Zero EP Rx-R w/Retracts BL (No Tx/Rx/Bat/Chgr)]]> http://www.hobbypeople.net/index.php/hp-mdl-zero-ep-rx-r-w-retracts-bl-no-tx-rx-bat-chgr.html

Hobby People Mitsubishi A6M Zero EP

Receiver-Ready w/Retracts

This is a Hobby People Mitsubishi A6M Zero EP Receiver-Ready Airplane w/Retracts. No Japanese WWII fighter is more well-known than the Mitsubishi A6M Zero (the official Allied reporting name was the “Zeke”). Active throughout WWII, it was considered the most-capable carrier-based fighter in the world. And, with its wide gear stance and low wing-loading, it was one of the easiest to fly. The Hobby People A6M Zero EP retains those great flight characteristics in a 1/12th-scale flying model that is fun and exciting to fly.

The airframe has panel lines, scale exhaust positions, guns and even a painted canopy. These details and paint scheme give the Hobby People A6M Zero EP scale good looks normally reserved for larger wood aircraft. It's ultra-quick to assemble too. Just glue on the tail, bolt on the wing and prop, install your own radio and battery, and you're ready to fly.

In the air, you'll get that great scale look that only comes when using retracts! The A6M Zero EP has simple mechanical retracts that are installed and adjusted at the factory. No mess, no fuss, just throw the switch and you'll have gear-up flight realism! The steerable tail wheel lets you taxi out and back just like the big boys. Top to bottom, tip to tip, the A6M Zero EP has the looks and performance you expect from a modern receiver-ready foam aircraft.

Features:

• Molded Foam Construction, Painted with Extensive Scale Details and Decals Applied

• One-Piece Wing with Dual Aileron Servos for Precise Control

• Mechanical Main Retracts with Gear Doors

• Steerable Tail Wheel

• Painted Canopy, Magnet Retained

• Easy-Access Battery Compartment

• Custom 11 x 10 3-Blade Propeller with Custom Spinner Finishes Off the Scale Look

• 3536 Size 800kV Brushless Motor and 50-Amp Brushless ESC

• Servos Installed with Control Linkages Ready for Final Setup Adjustments

• Great Flight Characteristics

• Scale Looks on the Ground and in the Air

Specifications:

• Wingspan: 39.75 Inches (1010mm)

• Length: 32.75 Inches (832mm)

• Wing Area: 265 Square Inches (17.10sq.dm)

• Weight RTF (Approximately): 32 Ounces (905g)

• Wing Loading: 17.4 Oz/SqFt (53.0g/sq.dm)

Items Required, But Not Included:

• 5-Channel or More Transmitter and Full-Range Micro Receiver

•11.1V 1500 to 2200mAh LiPo Battery

• LiPo Balance Charger

• Double-Sided Foam Tape

• Foam-Safe C/A Glue

• Basic Modeling Tools

Price: $159.99 Special Price: $99.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[HPHELI F450 Frame Kit (No Electronics)]]> http://www.hobbypeople.net/index.php/hpheli-f450-fram-kit-no-electronics.html

Price: $20.99 Special Price: $15.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[HPHELI F450 Quad DIY Starter Kit (Receiver-Ready)]]> http://www.hobbypeople.net/index.php/hpheli-f450-quad-diy-starter-kit.html

Hobby People F450 Quad DIY Starter Kit

Rx-R Brushless Quad Copter

This is a Hobby People F450 Quad DIY Starter Kit. The F450 Quad DIY Starter Kit has the essentials you need to build your own quad copter. With its versatile frame, the F450 Quad can handle multiple setups and accessories. In addition, our advanced and very stable multi-rotor flight controller works with all major radio brands, including Airtronics, and with its four 2212 1000Kv brushless motors, the F450 Quad has the lifting power to carry lightweight action cameras, add-on lightweight FPV (First Person View) equipment or higher capacity batteries. Build it your way, for your interests. Just add your own radio, receiver, 4-way power adapter and LiPo flight battery.

Features:

• Configure and Build to Your Needs

• Use Your Own 4-Channel or More Computer Radio System

• Includes Advanced Super Multi-Rotor Flight Controller

• Includes 2212 1000Kv Brushless Motors, 2 to 3S 30 Amp Brushless ESCs and 10 x 4.5 Propellers

• Enough Lifting Power to Carry Lightweight Cameras, FPV Equipment or Higher Capacity Batteries

• Strong, Lightweight Molded Outrigger Arms

• Strong, Lightweight Fiberglass Top and Bottom Plates

• Replacement Parts and Optional Accessories Available

Specifications:

• Diagonal Length: 17.7” (450mm)

• Weight: 9.9oz (282g)

• Take-Off Weight: 28.2 to 56.4oz (800 to 1600g)

• Motor: 2212 1000Kv Brushless (x4)

• ESC: 2 to 3S 30 Amp Brushless (x4)

• Propeller: 10 x 4.5 ’R’ (x2) / 10 x 4.5 ’L’ (x2)

What's Included:

• 1 x Hobby People F450 Frame Set

• 1 x Hobby People Super Multi-Rotor Flight Controller

• 4 x 2212 1000Kv Brushless Motors

• 4 x 2 to 3S 30A Brushless ESCs

• 4 x Motor/Battery Connector Sets with Heat-Shrink Tubing

• 4 x Propeller Adapters with Aluminum Spinner Nuts

• 2 x 10 x 4.5 ’R’ Propellers (Clockwise Rotation)

• 2 x 10 x 4.5 ’L’ Propellers (Counter-Clockwise Rotation)

Items Required, But Not Included:

• 4-Channel or More 2.4GHz Aircraft Radio w/Full-Range Receiver

• 3S 1300 to 2200mAh 30C LiPo Battery

• Hobby People 4-Way Power Adapter for F450 Quad and Others

• Hobby People Power Adapter Mounting Posts for F450 Quad and Others

• Hobby People 200mm Cable Ties for F450 Quad and Others

• Battery Strap or Self-Adhesive Hook & Loop Material

• AC or AC/DC LiPo Balance Charger

• Liquid Thread Lock

Price: $199.99 Special Price: $179.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[HPHELI Propeller 10x4.5 (1RH and 1LH)]]> http://www.hobbypeople.net/index.php/hpheli-propeller-10x4-5-1rh-and-1lh.html

Price: $5.99 Special Price: $4.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[HPHELI Propeller Set 8x4.5 (1RH and 1LH)]]> http://www.hobbypeople.net/index.php/hpheli-propeller-set-8x4-5-1rh-and-1lh.html

Price: $5.99 Special Price: $4.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[HPHELI Quad RTF Multi-Rotor RC Heli w/Camera]]> http://www.hobbypeople.net/index.php/quad-rtf-multi-rotor-rc-heli-with-camera.html

Hobby People Quad RTF Multi-Rotor RC Heli w/Camera

A New Dimension to R/C Flying!

Record Digital Video and Still Pictures with This Version of the Quad

This is a Hobby People Quad RTF Multi-Rotor RC Heli w/Camera. No prior experience needed! Now anyone can get flying indoors or out with the big Quad from Hobby People. And now you can record everything! This Quad features an on-board camera that will take still images and digital movies all at the click of a button right on the controller! And when you're done flying, it's easy to download the images from the micro memory card to your PC or laptop with the included computer cable.

This Ready-to-Fly (RTF) package includes the radio, flight battery, and charger! Two completely pre-programmed flight modes give you the ability to set up the Quad for beginners and indoor flying or for advanced, reactive outdoor flying! Our refined Six-Axis Stabilization provides advanced electronic gyroscopic, computer controlled stability that makes the Quad easy and fun to fly! And, when you're ready, the Quad is aerobatic, too! Flip in any direction at your command! Even fly in the dark with the bright navigation lights!

Features:

• Four-Motor Control with LiPo Power

• Fly Indoors or Outdoors

• Refined Six-Axis Stabilization

• Easy and Fun to Fly

• 4-Channel 2.4GHz Transmitter

• Bright LEDs Allow You to Fly at Night

• 640x480 Camera with 1GB Memory Card

• Take Pictures and Video

• Aerobatic Flips on Command

• Great for Beginners and Experts Alike

• Includes Set of Replacement Rotor Blades

• Not Your "Typical" Quadcopter

Specifications:

• Frame Span: 11.25 Inches (286mm)

• Blade Diameter: 5.3 Inches (135mm)

• Flying Weight: Approximately 3.5 Ounces (99g)

• Flying Time: Approximately 7 Minutes

• Charge Time: Approximately 30 to 45 Minutes

What's Included:

• Quad Multi Rotor R/C Helicopter

• 4-Channel 2.4GHz Transmitter

• 1S 3.7V 500mAh 25C LiPo Battery

• AC LiPo Wall Charger

• Replacement Rotor Blades Set

• 1GB Memory Card & PC Adapter Cable

Items Required, But Not Included:

• 4 'AA' Alkaline Batteries for Transmitter

Price: $119.99 Special Price: $89.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[HPHELI SK450 Frame Kit (No Electronics)]]> http://www.hobbypeople.net/index.php/hpheli-sk450-frame-kit-no-electronics.html

Price: $39.99 Special Price: $29.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[HPHELI Super Multi-Rotor Controller (4 to 6 Motor)]]> http://www.hobbypeople.net/index.php/hpheli-super-mr-controller-4-6x.html

Hobby People Super Multi-Rotor Contoller

for 4-Axis and 6-Axis Multi-Copters

This is a Hobby People Super Multi-Rotor Controller. The Super Multi-Rotor Controller is small and lightweight, and designed for use with 250 to 600 size 4-axis and 6-axis multi-copters. It supports configurations for four different flight modes and four different receiver types, and features a built-in auto-stabilization function and acceleration sensor for stable, controlled flight. The Super Multi-Rotor Controller is easy to set up and calibrate and features an adjustable gain dial to fine-tune the sensitivity of your model’s flight controls. The Super Multi-Rotor Controller includes double-sided foam mounting tape, two pre-wired flight control adapters and a gain adjustment tool.

Features:

• Small and Lightweight - Designed for Use with 250 to 600 Size 4-Axis and 6-Axis Multi-Copters

• Built-In Auto-Stabilization Function and Acceleration Sensor for Stable, Controlled Flight

• Supports Four Different Flight Modes: ‘X4’, ‘+4’, ‘X6’ and ‘HEX6’

• Compatible with Standard, S-Bus, DSM2 and DSMX Receivers

• Adjustable Gain Dial to Fine-Tune Flight Sensitivity

• Easy to Set Up and Calibrate

Specifications:

• Operating Voltage Range: 3.6V to 8.4V

• Operating Current: 60mA

• Processor: 32-Bit ARM®

• Output Rate: 360Hz

• Dimensions: 1.69 x 1.14 x 0.51” (43 x 29 x 13mm)

• Weight: 0.31 Ounces (9g)

Price: $44.99 Special Price: $34.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[HPHELI X-2 RTF 350 Size Dual Rotor Outdoor Helicopter]]> http://www.hobbypeople.net/index.php/hpheli-x-2-rtf-350-size-dual-rotor-outdoor-helicopter.html

HP Heli's X-2

350-Size Outdoor RTF Co-Axial Helicopter

Co-Axial Helicopters revolutionized RC helicopters. Today the X-2 Revolutionizes Co-Axials.

This is the Hobby People Heli's X-2 350-Size Outdoor RTF Co-Axial Helicopter. Finally, a co-axial made for the real world - for beginners and experts alike. Fly outdoors. Fly in wind. Fly fast with authority.

The X-2 helicopter is perfect for learning to fly. It's the ONLY helicopter with multiple control settings from beginner 3-channel to high-performance 5-channel. You'll find it stable and very easy to hover, which is perfect for indoor flying. Plus, it's easy to see because it's larger than most co-axial helicopters. The X-2 is simply easy to fly.

However, we mean fly, not just hover. Because after you've got hovering down in 3-channel mode (or even 2-channel altitude-limit mode with the additional Flight Height Limit Device (sold separately), only the X-2's unique patented 5-channel mixed anti-wind tail rotor design can fly in windy conditions. What's more, it has proper control authority and the power to fly FAST for advanced pilots. The experienced helicopter pilots call it Fast-Forward-Flight. Experienced or not, you'll call it EXCITING. From learning to hover in 3- or 4-channel mode to flying fast outdoors in advanced 5-channel mode, the X-2 is the most-fun, most-exciting co-axial available today. You'll never look at co-axials the same way again. Join the X-2 Revolution.

Features:

• 100% Factory-Assembled

• Co-Axial Rotor System for Unmatched Stable Flight

• 5-Channel Anti-Wind Tail Control System (Patented)

• Advanced 2.4GHz Radio Control System

• Innovated Transmitter with Adjustable Channel Modes

• Match Helicopter Performance to Your Flying Skill Level

• 3S LiPo Battery with AC LiPo Balance Charger

• Automatic Yaw Gyro for Stable Flight

• Composite Plastic Main Frame with Metal Frame Plate

• Aluminum Tail Boom

• Option Upgrades and Repair Parts Available

• Detailed User's Guide

Specifications:

• Completion Level: Ready-to-Fly

• Experience Level: Beginner to Skilled

• Recommended Environment: Indoor or Outdoor

• Rotor Diameter: 18.75 Inches (476mm)

• Length: 20.25 Inches (515mm)

• Height: 9.8 Inches (250mm)

• Weight: 16.6 Ounces (470g)

• Main Motor: 180-Size Brushed x 2

• Tail Motor: N30-Size Brushed

• Flight Battery: 3S 11.1V 850mAh 22C LiPo

• Charger: 15VDC Input / 1.0A Output 2-3S LiPo Balance

• AC Adapter: 100 to 240VAC Input / 15V 1.0A Output

• Transmitter: 5-Channel 2.4GHz FHSS Digital Proportional

• Servos: 9 Gram Micro x 2

• Receiver: 5-n-1 2.4GHz FHSS Integrated

• Gyro: Externally Mounted Yaw Control

• Flight Range (Brushed): Up to 300 Ft

• Flight Range (Brushless): Up to 900 Ft

Items Required, But Not Included:

• 4 AA Batteries for the Transmitter

Optional Parts:

Several option upgrades are available for the X-2 to make your flying experience even more fun:

• 166206 Flight Height Limit Device - X-2 (Option) - This unique device is an on-board rpm governor that controls how high the X-2 can fly, regardless of throttle stick position. Perfect for beginners to prevent fly-aways, its also great for advanced pilots wanting to carry a camera or other expensive devices.

• 166207 Light Set - X-2 (Option) - Want to fly at night? Want a visual assist for orientation? This light set is made for the X-2 and plugs right into the 5-n-1 Rx board for ultimate convenience and compatibility.

• 166201 Brushless Conversion Set - X-2 Hopup (Option) - This brushless motor/ESC system has two motors and two ESC'sl custom-made for the X-2, to provide the utmost in power and efficiency. This gives the X-2 a 6-8 ounce payload capacity.

• 166208 Aileron Power-Assist Set - X-2 (Option) - Upgraded to Brushless motors? Need more aileron authority? This Power-Assist for aileron control gives the X-2 the same authority for aileron control as the tail motor does for pitch control. Never has a co-axial had so much control-authority and maneuverability in wind!

• 166212 Landing Gear For Video Camera - X-2 (Option) - Carry a Go-Pro or similar camera (not included) with ease. This add-on landing gear is fast and easy to install and allows the X-2 to carry a Go-Pro Video Camera! This landing gear is also great for those flying in tall grass. Note that carrying cameras or other payload adds  weight and stress to the motors. We recommend the brushless upgrade for carrying any cameras that weigh more than 2 ounces.

Setup Notes:

1. The X-2 is the latest generation of the Extreme Flyers X-350. This new generation has vastly more advanced electronics that make the TX and RX 5-n-1 incompatible with the X-350.

2. The X-2 uses a new battery plug. Plug set and Charging adapter is available. Item No 166325.

3. The new X-2 uses a metal-weighted flybar and the link is adjustable. This adjustable link is used to change the relationship between the flybar and the top blades. This creates a control for eliminating oscillation during hovering.

Price: $199.99 Special Price: $149.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[HUBSAN FPV Invader 4Ch Single Rotor Helicopter]]> http://www.hobbypeople.net/index.php/fpv-invader-4ch-single-rotor-helicopter.html

Hubsan Invader RTF

 2.4GHz FPV Single Rotor Helicopter

The Hubsan Invader RTF 2.4G FPV Single Rotor Helicopter is simply amazing. Not only is it a great flyer, it features a 5-megapixel camera that shoots live video directly to a 3.5" LCD monitor on the transmitter - in color! The Invader features rugged alloy construction, including a CNC-machined fixed-pitch rotor head. The flight controls can be programmed via the transmitter for beginner or expert flyers, making the Invader a good choice for all types of pilots. The Invader is a fixed-pitch heli and uses a 4-in-1 control unit that features a tail rotor gyro for stability, a flight control mixer, an ESC and the receiver.

Features:

• 4-Channel, Fixed-Pitch, Single Rotor

• Tail Rotor Gyro

• Selectable Flight Control Sensitivity for Beginner or Expert

• Durable Alloy Construction

• Includes 5-Megapixel Camera Installed Below Mainframe

• CNC-Machined Metal Rotor Head

• Direct-Drive Tail Rotor

• 2.4G Transmitter with 3.5" LCD Color Monitor

Specifications:

• Weight: 187g

• Main Rotor Diameter: 338mm

• Tail Rotor Diameter: 64mm

• Motor: 180 (Main) / N30 (Tail)

• Transmitter: 4-Channel 2.4GHz with 3.5" LCD Color Monitor

• Video Transfer Frequency: 5.8GHz

• Control Distance: 100 to 300 Meters

• Onboard Controller: 4-in-1 Control Unit Features Gyro, Mixer, ESC and Receiver

• Servos: 3.7g / 0.12sec/60º

• Camera: 5 Megapixels

• Live Video Distance: 50 to 100 Meters

Price: $269.99 Special Price: $199.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Magnum Accy's Fuel Pump - Electric 12V DC]]> http://www.hobbypeople.net/index.php/magnum-fuel-pump-electric-12v-dc.html

Magnum Fuel Pump - Electric 12V DC

Magnum's 12V Fuel Pump!

Fill or drain your fuel tank using your power panel or any 12V battery. Mounts quickly to your fuel can, or to your field box. Includes clunk, nozzle, and alligator leads.

Price: $14.99 Special Price: $9.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Magnum Parts Muffler - XLS 40-52 Pitts Style]]> http://www.hobbypeople.net/index.php/magnum-muffler-xls-40-52-pitts-style.html Magnum Muffler - XLS 40-52 Pitts Style

This is a replacement pitts style muffler for your XLS 40-52 2-stroke engine from Magnum.

Price: $24.99 Special Price: $18.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[Phase 3 U-2 EDF Spy Plane RR (Incl:Motor, Fan, Esc, Sx)]]> http://www.hobbypeople.net/index.php/phase-3-u-2-edf-spy-plane-rr-incl-motor-fan-esc-sx.html

Phase 3 U-2 EDF Spy Plane

Receiver Ready with Motor, Fan, ESC and Servos

In the early 1950s, with Cold War tensions on the rise, the US military required better strategic reconnaissance to help determine Soviet capabilities and intentions. It was thought an aircraft that could fly at 70,000 feet would be beyond the reach of Soviet fighters, missiles, and even radar. Phase 3 brings the iconic U-2 spyplane to life in a high performance EDF that represents outstanding value. Manufactured from lightweight foam, in almost ready to fly format so you’ll be ready for your first exciting mission in no time!

Flying the U-2 Spyplane:

The Phase 3 U-2 Spyplane is essentially a powered glider and it can be flown in a very scale-like manner. While it is not suitable for beginners, it does make a very good second aileron model. With the assistance of a helper, switch on the transmitter, then connect a fully charged 1650-2200 mah 11.1V Li-Po battery. Refit the canopy and check the control throws. If there is any wind, ask you helper to point the model into it. Open the throttle fully, then have your helper launch the U-2 slightly nose down with a firm push keeping the wings level. Allow the model to fly straight and continue to hold the power on until sufficient height has been gained.

The U-2 is best flown smoothly, trading height for speed for gentle aerobatic manoeuvres. The wings will flex in flight - as did the fullsize - but you should avoid pulling very high G manouevres when flying at full speed or after a steep dive to avoid over-stressing the airframe.

Landing presents no difficulties and the U-2 can be simply lined up into the wind and the motor power reduced until the model settles into its glide path. Once landed, please unplug and remove the Li-Po battery from the model and allow it to cool completely before recharging.

Aircraft Specifications and Features:

• Wingspan: 1690mm (66.5 Inches)

• Length: 1030mm (40.5 Inches)

• Simple and Quick to Assemble

• Durable, Lightweight Molded Foam Airframe

• No Glue Required!

• Realistic Stealth Colour Scheme

• Easy Access to Battery Via Large Canopy

• Custom, Powerful Brushless Motor Included

• High Performance Fan Unit Included

• 3 x Factory Fitted Servos (2 ailerons and elevator)

• Smooth, Fast and Stable Flying

Motor Specifications:

• Size: 2835

• Diameter: 28mm

• KV: 4300

• Voltage: 11.1V rated (3S)

• Motor Shaft Dimension: 4mm

Items Required, But Not Included:

• 3-Channel or More Radio System with Mini or Micro Receiver

• 3S 1650mAh to 2200mAh Li-Po Battery

• Li-Po Battery Charger

Price: $139.99 Special Price: $99.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM 3.5mm Rod Ends Heavy Duty (12)]]> http://www.hobbypeople.net/index.php/3-5mm-rod-ends-heavy-duty-12.html

708336 3.5mm Rod Ends Heavy Duty (12)

RPM has been known for exceptionally strong, tight-tolerance rod ends (also known as “ball cups”). They should – they’ve been the strongest and best rod ends in the R/C industry for over 20 years!

Standard RPM rod ends have always been quite versatile but the use of 3.5mm turnbuckles is quite popular. Since their standard rod ends have too small of a hole for the larger turnbuckle to thread into properly, RPM decided to make it easier for customers by releasing these 3.5mm Heavy Duty Rod Ends that allow the use of larger than stock 3.5mm turnbuckles while still using a standard 4.3mm (.170”) diameter ball stud, common to most 1/10th scale Losi, Associated and some HPI vehicles. Now anyone can run a stronger 3.5mm turnbuckle size without having to sacrifice strength or durability with an inferior rod end!

Price: $4.95 Special Price: $3.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM 4-40 Rod Ends (12) HD]]> http://www.hobbypeople.net/index.php/rpm-heavy-duty-rod-ends-12-4-40.html RPM Heavy Duty Rod Ends (12) 4-40

Heavy Duty Rod Ends (12) 4-40 .

When it comes to RPM rod ends, they are the basis for comparison! RPM's rod ends have oversized hexes and our ball cups are molded to the strictest of tolerances & are molded from our blend of tough, bulletproof nylons. If youre tired of popping ball cups and breaking rod ends, RPM rod ends are the solution! RPM rod ends fit all Associated, Losi, & HPI ball-studs. Like all of our products, RPM rod ends are guaranteed not to break!

Price: $4.95 Special Price: $3.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM 4-40 Rod Ends (12) Neon Blue HD]]> http://www.hobbypeople.net/index.php/rpm-heavy-duty-rod-ends-12-4-40-neon-blue.html RPM Heavy Duty Rod Ends (12) 4-40 Neon Blue

Heavy duty Rod Ends (12) 4-40 Neon Blue

When it comes to RPM rod ends, they are the basis for comparison! RPM's rod ends have oversized hexes and our ball cups are molded to the strictest of tolerances & are molded from our blend of tough, bulletproof nylons. If youre tired of popping ball cups and breaking rod ends, RPM rod ends are the solution! RPM rod ends fit all Associated, Losi, & HPI ball-studs. Like all of our products, RPM rod ends are guaranteed not to break!

Price: $4.95 Special Price: $3.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM A-Arms Front EXO Buggy]]> http://www.hobbypeople.net/index.php/rpm-a-arms-front-exo-buggy.html

RPM Front A-Arms

for Axial EXO Terra Buggy

This is a pair of RPM Front A-Arms for the Axial EXO Terra Buggy. RPM A-arms for the Axial EXO Terra Buggy are designed with unique features found only on RPM A-arms. We use 30 degree leading and trailing edges, which help the vehicle transition up and over tall objects instead of plowing into or through them. Our oversized bosses for the hinge pin, shock mount and screws help support high breakage areas. Key oversized areas can be larger in diameter by at least 10% and wider by as much as 65%!

RPM engineers tweaked the shock mount angle on our rear A-arms to eliminate the bind on the lower shock pivot ball at full suspension droop found with stock a-arms. A full set of front and rear A-arms from RPM weigh in less than stock arms as well, shedding unsprung weight in the process of adding some much needed muscle. A final, critical touch eliminates much of the slop from the suspension and steering systems. Hinge pin hole diameters are now .118" (or 3mm), cutting nearly .004" (.1mm) of slop from each hinge pin!

RPM EXO A-arms are molded from our trademark blend of incredibly strong materials and are sold in black. All RPM molded products are backed by our limited lifetime warranty against breakage. Bolt a set on and feel comfortable knowing your ride is protected by RPM!

Features and Specifications:

• Replaces Stock Axial Front A-Arms for EXO Terra Buggy

• 30º Leading and Trailing Edges Help Vehicle Transition Up and Over Objects

• Oversized Bosses for the Hinge Pin and Shock Mounts

• Tweaked Shock Mount Angle to Eliminate Binding on the Lower Shock Pivot Ball

• Lighter Weight and Less Slop Than Stock A-Arms

Price: $15.95 Special Price: $11.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM A-Arms Rear EXO Buggy]]> http://www.hobbypeople.net/index.php/rpm-a-arms-rear-exo-buggy.html

RPM Rear A-Arms

for Axial EXO Terra Buggy

This is a pair of RPM Rear A-Arms for the Axial EXO Terra Buggy. RPM A-arms for the Axial EXO Terra Buggy are designed with unique features found only on RPM A-arms. We use 30 degree leading and trailing edges, which help the vehicle transition up and over tall objects instead of plowing into or through them. Our oversized bosses for the hinge pin, shock mount and screws help support high breakage areas. Key oversized areas can be larger in diameter by at least 10% and wider by as much as 65%!

RPM engineers tweaked the shock mount angle on our rear A-arms to eliminate the bind on the lower shock pivot ball at full suspension droop found with stock a-arms. A full set of front and rear A-arms from RPM weigh in less than stock arms as well, shedding unsprung weight in the process of adding some much needed muscle. A final, critical touch eliminates much of the slop from the suspension and steering systems. Hinge pin hole diameters are now .118" (or 3mm), cutting nearly .004" (.1mm) of slop from each hinge pin!

RPM EXO A-arms are molded from our trademark blend of incredibly strong materials and are sold in black. All RPM molded products are backed by our limited lifetime warranty against breakage. Bolt a set on and feel comfortable knowing your ride is protected by RPM!

Features and Specifications:

• Replaces Stock Axial Rear A-Arms for EXO Terra Buggy

• 30º Leading and Trailing Edges Help Vehicle Transition Up and Over Objects

• Oversized Bosses for the Hinge Pin and Shock Mounts

• Tweaked Shock Mount Angle to Eliminate Binding on the Lower Shock Pivot Ball

• Lighter Weight and Less Slop Than Stock A-Arms

Price: $15.95 Special Price: $11.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Axle Carriers - 1/16 E-Revo/Slash Black]]> http://www.hobbypeople.net/index.php/axle-carriers-1-16-e-revo-slash-black.html

719462 Axle Carriers - 1/16 E-Revo/Slash Black

There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale E-Revo, Slash & Rally, there is absolutely no slop adjustment for the suspension pivot balls. Once the axle carriers begin to wear at those balls, the camber, toe and caster angles don’t stay true, causing the vehicle to wander, making it very difficult to control.

That is where RPM steps in. Their 1/16th scale E-Revo, Slash & Rally Axle Carriers have a unique pivot ball retention system that locks the pivot ball in place, yet still allows for adjustment due to wear. Their system is based on a cap design, held in place with a pair of small screws. Simply slip the caps in place, tighten the flathead screws until the free play of the pivot ball is eliminated and you’re ready to go!

RPM Axle Carriers have been completely redesigned for added durability and crash-survivability. RPM engineers found that the stock pivot ball opening could be reduced in size to help support the pivot ball better, meaning a significantly lower chance of pulling the ball through the hole. The redesigned overall shape and superior materials that go into RPM's version make them the best alternative at the lowest price available! And to top it off, RPM axle carriers are marginally lighter than the stock versions!

Price: $12.79 Special Price: $9.59

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Axle Carriers - 1/16 E-Revo/Slash Blue]]> http://www.hobbypeople.net/index.php/rpm-axle-carriers-1-16-e-revo-slash-blue.html

There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale E-Revo, Slash & Rally, there is absolutely no slop adjustment for the suspension pivot balls. Once the axle carriers begin to wear at those balls, the camber, toe and caster angles don’t stay true, causing the vehicle to wander, making it very difficult to control.

That is where RPM steps in. Their 1/16th scale E-Revo, Slash & Rally Axle Carriers have a unique pivot ball retention system that locks the pivot ball in place, yet still allows for adjustment due to wear. Their system is based on a cap design, held in place with a pair of small screws. Simply slip the caps in place, tighten the flathead screws until the free play of the pivot ball is eliminated and you’re ready to go!

RPM Axle Carriers have been completely redesigned for added durability and crash-survivability. RPM engineers found that the stock pivot ball opening could be reduced in size to help support the pivot ball better, meaning a significantly lower chance of pulling the ball through the hole. The redesigned overall shape and superior materials that go into RPM's version make them the best alternative at the lowest price available! And to top it off, RPM axle carriers are marginally lighter than the stock versions!

Price: $12.79 Special Price: $9.59

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bearing Carriers - Slash 4x4 Rear]]> http://www.hobbypeople.net/index.php/rpm-rear-bearing-carriers-slash-4x4.html

 

Price: $10.95 Special Price: $8.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Black Rear Bumper / Assoc. SC10 2WD]]> http://www.hobbypeople.net/index.php/rpm-black-rear-bumper-assoc-sc10-2wd.html

RPM R/C Rear Bumper (Black)

for Team Associated SC10

This is an RPM R/C Rear Bumper (Black) for the Team Associated SC10. The RPM Rear Bumper for the Associated SC10 has been extended further rearward by almost 1/2" over the stock bumper, moving it into the primary impact point out back, thereby reducing the likelihood of a rear impact damaging the body. We also raised the top of our bumper to help protect the body when the truck flips over in a crash. Additionally, the RPM SC10 rear bumper has removable mud flap mounts so mud flaps (sold separately) may be run on or off without having to modify the bumper.

The RPM SC10 Rear Bumper is manufactured from our extremely tough blend of proprietary materials right here in the USA and is backed by our industry-leading warranty. Each bumper comes with all necessary mounting hardware and instructions.

Features:

• Bumper Extended 1/2" to Move Primary Impact Point Back to Help Prevent Body Damage

• Top of Bumper is Raised to Help Prevent Body Damage When the Truck Flips

• Featurs Removeable Mud Flap Mounts to Mount Mud Flaps (Sold Separately)

• Molded From RPM R/C's Proprietary Blend of Durable Nylons

Fits:

• Team Associated SC10 2WD

Price: $10.89 Special Price: $8.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Blue Front Left A-arms / Traxxas Summit]]> http://www.hobbypeople.net/index.php/rpm-blue-front-left-a-arms-traxxas-summit.html

RPM Front Left A-Arms (Blue)

for Traxxas Summit, Revo & E-Revo

This is a set of RPM Front Left A-Arms (Blue) for Traxxas Summit, Revo & E-Revo vehicles. RPM now has a set of front left A-arms for the Traxxas Summit. The front right A-arms for the Traxxas Revo are already compatible with the Summit, but due to the extended T-Lock differential on the left side, the Revo front left A-arms would not fit. That is no longer an issue when using these A-arms. With a revamped cross-brace to clear the T-Lock differential, the Summit front left A-arms will allow full suspension travel and significantly improve overall suspension durability.

RPM front A-arms for the Traxxas Summit are molded from a blend of engineering-grade nylons for unmatched performance and durability. Every RPM molded part is manufactured in the USA and carries a limited lifetime warranty against breakage. If you’re tired of replacing broken stock parts over and over, give RPM a try.

Features:

• Revamped Cross-Brace to Clear T-Lock Differential

• Allows Full Suspension Travel and Significantly Improves Overall Suspension Durability

• Molded From a Blend of Engineering-Grade Nylons for Unmatched Performance and Durability

• Made in the USA - Limited Lifetime Warranty Against Breakage

Fits:

• Traxxas Summit, Revo and E-Revo

Price: $14.95 Special Price: $11.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Body Mounts & Posts - Slash/Rustler Front Adjustable]]> http://www.hobbypeople.net/index.php/body-mounts-and-posts-slash-rustler-front-adjustable.html

719521 Body Mounts & Posts - Slash/Rustler Front Adjustable

RPM Adjustable Body posts for the Traxxas Slash 2wd are here and are designed for durability and strength while still allowing you to change the body height on the truck.

RPM's unique body post mounting system allows the option of using the stock body height on the chassis. The body can also be lowered as much as 3/16” or raised as much as 3/8” simply by moving the posts up or down on the mounts.

This simple, yet clever design is strong enough to handle the toughest of conditions while still allowing enough flex to absorb impacts that could otherwise damage other more fragile internal components of the chassis. Everything about RPM body mounts and posts are beefier than stock – from the thicker than stock screw mounts to the twin screws holding the body posts on to the mounts. They also use an I-beam shape throughout each mount, which provides the strength these parts need for those less than perfect landings.

Price: $9.89 Special Price: $7.42

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Body Mounts & Posts - Slash/Stampede Rear Adjustable]]> http://www.hobbypeople.net/index.php/body-mounts-and-posts-slash-stampede-rear-adjustable.html

719542 Body Mounts & Posts - Slash/Stampede Rear Adjustable

RPM Adjustable Body posts for the Traxxas Slash 2wd are here and are designed for durability and strength while still allowing you to change the body height on the truck.

RPM's unique body post mounting system allows the option of using the stock body height on the chassis. The body can also be lowered as much as 3/16” or raised as much as 3/8” simply by moving the posts up or down on the mounts.

This simple, yet clever design is strong enough to handle the toughest of conditions while still allowing enough flex to absorb impacts that could otherwise damage other more fragile internal components of the chassis. Everything about RPM body mounts and posts are beefier than stock – from the thicker than stock screw mounts to the twin screws holding the body posts on to the mounts. They also use an I-beam shape throughout each mount, which provides the strength these parts need for those less than perfect landings.

Price: $9.89 Special Price: $7.42

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Body Mounts - Slash 4x4,Stampede 4x4 Adjustable]]> http://www.hobbypeople.net/index.php/rpm-body-mounts-slash-4x4-adjustable.html

 

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Body Savers]]> http://www.hobbypeople.net/index.php/rpm-body-savers.html

RPM Body Savers One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes put in the body for the body posts have a tendency to crack & fracture. This is the reason RPM designed these cool body savers. With their ideal two piece design, it allows one piece to slide through the bottom of the body while the second piece snaps into place from the top of the body. These body savers stay right where you put them, on the body, so you never have to worry about chasing them around! We have found that body life tends to triple when they are installed! Molded from black nylon and sold in a set of five, four for the body mounts & one for the antenna hole!.

Price: $2.95 Special Price: $2.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bulkhead - Slash LCG 4x4/Rally Front Black]]> http://www.hobbypeople.net/index.php/rpm-bulkhead-front-lcg-slash-4x4-rally-black.html

RPM LCG Front Bulkhead

for Traxxas Slash 4x4 & Rally*

This is an RPM LCG Front Bulkhead for the Traxxas Slash 4x4 & Rally. Designed from the ground up, the RPM Low Center of Gravity front bulkhead for the Traxxas Slash 4x4 & 1/10th scale Rally is here to solve several key issues reported to RPM by our customers. First, we split our design into two pieces, making maintenance a much simpler task. With the RPM design, the front end of the vehicle can be removed without having to remove the bellcranks. Simply remove the two tie rod screws at the spindle block and the steering system stays with the chassis.

We’ve included several modifications that help keep the steering system remain cleaner as well. The first and most noticeable improvement comes from a pair of side dirt shields that blend with the chassis and help protect the steering servo / bellcrank area from debris kicked up by the front wheels. We’ve also sealed the bottom of the bulkhead so debris can no longer enter from below.

Each RPM LCG bulkhead is manufactured from our bulletproof blend of engineering grade nylons and is supported by our limited lifetime breakage warranty for stress-free performance you can count on.

Features:

• 2-Piece Design Makes Maintenance Much Easier

• Side Dirt Shields and Sealed Bulkhead Bottom Keeps Steering System and Chassis Remain Cleaner

• Manufactured From a Blend of Engineering Grade Nylons

• Limited Lifetime Breakage Warranty

*These bulkheads will not work on the standard chassis version of the Slash 4x4. This is designed for the LCG version only.

Price: $12.95 Special Price: $9.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bulkhead - Slash LCG 4x4/Rally Front Blue]]> http://www.hobbypeople.net/index.php/rpm-bulkhead-slash-lcg-4x4-rally-front-blue.html

RPM Front Bulkhead (Blue)

for Traxxas Slash LCG 4x4 & Rally LCG

This is an RPM Front Bulkhead (Blue) for the Traxxas Slash LCG 4x4 & Rally LCG. Designed from the ground up, the RPM Low Center of Gravity front bulkhead for the Traxxas Slash 4x4 & 1/10th scale Rally is here to solve several key issues reported to RPM by our customers. First, we split our design into two pieces, making maintenance a much simpler task. With the RPM design, the front end of the vehicle can be removed without having to remove the bellcranks. Simply remove the two tie rod screws at the spindle block and the steering system stays with the chassis.

We’ve included several modifications that help keep the steering system remain cleaner as well. The first and most noticeable improvement comes from a pair of side dirt shields that blend with the chassis and help protect the steering servo / bellcrank area from debris kicked up by the front wheels. We’ve also sealed the bottom of the bulkhead so debris can no longer enter from below.

Each RPM LCG bulkhead is manufactured from our bulletproof blend of engineering grade nylons and is supported by our limited lifetime breakage warranty for stress-free performance you can count on.

Price: $12.95 Special Price: $9.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bulkhead - T/E Maxx Rear Black]]> http://www.hobbypeople.net/index.php/rpm-bulkhead-rear-t-e-maxx-black.html

RPM Rear Bulkheads (Black)

for Traxxas T-Maxx & E-Maxx (All Versions)

This is a pair of RPM Rear Bulkheads (Black) for the Traxxas T-Maxx & E-Maxx (All Versions). These RPM Rear Bulkheads for the T-Maxx & E-Maxx are available to further improve the durability of these awesome monster trucks! Each RPM rear bulkhead follows the same design criteria we used to build our front bulkheads - superior materials, impact resistant design changes and lock-nuts to help prevent critical screws from backing out. All this in a part that weighs exactly the same as the stock rear bulkheads!

RPM bulkheads are stock replacement parts. Each set of bulkheads is sold in pairs and molded in black and backed by our world-renowned limited lifetime breakage warranty. RPM molded products are proudly designed and manufactured right here in the USA!

Features:

• Fits All Versions of Traxxas T-Maxx and E-Maxx

• Superior Materials and Impact-Resistant Design

• Includes Lock Nuts to Prevent Critcial Screws From Backing Out

• Improves the Durability of Your Monster Truck

What's Included:

• 1 Pair of RPM Rear Bulkheads for the Traxxas T-Maxx & E-Maxx Molded in Black

Price: $15.95 Special Price: $11.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bulkhead - T/E Maxx Rear Blue]]> http://www.hobbypeople.net/index.php/rpm-bulkhead-rear-t-e-maxx-blue.html

RPM Rear Bulkheads (Blue)

for Traxxas T-Maxx & E-Maxx (All Versions)

This is a pair of RPM Rear Bulkheads (Blue) for the Traxxas T-Maxx & E-Maxx (All Versions). These RPM Rear Bulkheads for the T-Maxx & E-Maxx are available to further improve the durability of these awesome monster trucks! Each RPM rear bulkhead follows the same design criteria we used to build our front bulkheads - superior materials, impact resistant design changes and lock-nuts to help prevent critical screws from backing out. All this in a part that weighs exactly the same as the stock rear bulkheads!

RPM bulkheads are stock replacement parts. Each set of bulkheads is sold in pairs and molded in blue and backed by our world-renowned limited lifetime breakage warranty. RPM molded products are proudly designed and manufactured right here in the USA!

Features:

• Fits All Versions of Traxxas T-Maxx and E- Maxx

• Superior Materials and Impact-Resistant Design

• Includes Lock Nuts to Prevent Critcial Screws From Backing Out

• Improves the Durability of Your Monster Truck

What's Included:

• 1 Pair of RPM Rear Bulkheads for the Traxxas T-Maxx & E-Maxx Molded in Blue

Price: $15.95 Special Price: $11.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper & Skid Plate - Slash 4x4 Black Front]]> http://www.hobbypeople.net/index.php/rpm-bumper-and-skid-plate-slash-4x4-black-front.html

 

Price: $15.95 Special Price: $11.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper - Rustler 2WD/Stampede 2WD Black Fr Wide]]> http://www.hobbypeople.net/index.php/rpm-bumper-rustler-stampede-front-wide.html RPM Bumper - Rustler/Stampede Front Wide

This is a Wide Front Bumper for the Traxxas Rustler and Stampede. The Bumper goes on the Front of the Vehicle and Protects the Chassis.

Price: $6.95 Special Price: $5.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper - Slash 4x4 Rear Black]]> http://www.hobbypeople.net/index.php/rpm-bumper-slash-4x4-rear-black.html

 

Price: $14.95 Special Price: $11.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper - Slash 4x4 Rear Blue]]> http://www.hobbypeople.net/index.php/rpm-bumper-slash-4x4-rear-blue.html

 

Price: $14.89 Special Price: $11.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper - Slash 4x4 Rear Chrome]]> http://www.hobbypeople.net/index.php/rpm-bumper-slash-4x4-rear-chrome.html

 

Price: $16.95 Special Price: $12.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper - Slash Rear Black]]> http://www.hobbypeople.net/index.php/rpm-bumper-slash-rear-black.html RPM Bumper - Slash Rear Black After RPM released their front bumper for the Traxxas Slash, they immediately started receiving customer requests for an RPM rear bumper. In typical RPM fashion, they dont just make replacement parts; they make the best replacement parts possible! So what sets the RPM rear bumper above all else? They started with their incredibly durable materials and created a bumper that is based off of current full-sized Short Course and Baja style rear bumpers. Full-sized rear bumpers are wide and flat and RPM's scale version is exactly that, for the ultimate in rear-end protection. RPM rear bumpers will stop most rear impacts from affecting the truck in any negative way.

Additionally, RPM rear bumpers for the Traxxas Slash weigh in at a full 9 grams (18%) lighter than the stock version! Lighter is always faster.

What more could we do to make these things incredibly realistic? How about mounting points for mud flaps? Thats right; these bumpers come stock with mounting positions for RPM Mud Flaps (#81012 - available separately). Now the Slash owner can run mud flaps for ultra-realistic good looks.

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper - Slash Rear Blue]]> http://www.hobbypeople.net/index.php/rpm-bumper-slash-rear-blue.html

RPM Bumper - Slash Rear Blue After RPM released their front bumper for the Traxxas Slash, they immediately started receiving customer requests for an RPM rear bumper. In typical RPM fashion, they dont just make replacement parts; they make the best replacement parts possible! So what sets the RPM rear bumper above all else? They started with their incredibly durable materials and created a bumper that is based off of current full-sized Short Course and Baja style rear bumpers. Full-sized rear bumpers are wide and flat and RPM's scale version is exactly that, for the ultimate in rear-end protection. RPM rear bumpers will stop most rear impacts from affecting the truck in any negative way.

Additionally, RPM rear bumpers for the Traxxas Slash weigh in at a full 9 grams (18%) lighter than the stock version! Lighter is always faster.

What more could we do to make these things incredibly realistic? How about mounting points for mud flaps? Thats right; these bumpers come stock with mounting positions for RPM Mud Flaps (#81012 - available separately). Now the Slash owner can run mud flaps for ultra-realistic good looks.

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper - Slash Rear Chrome]]> http://www.hobbypeople.net/index.php/rpm-bumper-slash-rear-chrome.html

 

Price: $13.95 Special Price: $10.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper - Stampede 4x4 Front Wide Black]]> http://www.hobbypeople.net/index.php/rpm-bumper-stampede-4x4-front-wide-black.html

RPM RC Stampede 4x4 Wide Front Bumper - Black

This is an upgraded black RPM RC wide front bumper for the Traxxas Stampede 4x4. The Traxxas Stampede 4x4 is a cool truck with lots of nice features built in, but it’s missing one critical piece – some serious front-end protection. Not anymore! Our Wide Front Bumper for the Traxxas Stampede 4x4 is designed to fill that vacancy. Our bumper uses the same design principles and styling as those found on our 2wd Stampede Front Bumper, the most popular front bumper RPM has ever produced. Why is it so popular? Because it works!

The RPM Wide Front Bumper is designed to protrude out in front of the truck far enough to be the first contact point during a frontal collision, yet is back far enough not to impede normal driving. When the inevitable front-end impact occurs, our bumper will take the brunt of the force, absorbing that impact energy by deforming under the pressure, and then when the crash concludes, the bumper will return to its original shape, ready for action once again. With an RPM Wide Front Bumper installed, more fragile chassis and front differential components have a much better survival rate under even the roughest bash sessions.

RPM Wide Front Bumpers for the Traxxas Stampede 4x4 are stock replacement parts. Simply remove the stock front skid plate, replace it with the RPM version and you're ready to go. It even incorporates the mounting points for the stock upper bumper, if you wish to keep it in place.

Features:

• Molded from High-Strength Composite Plastic

• Improves the Front-End Durability of Your Stampede 4x4

• Direct-Fit Upgrade

• Quick and Easy-to-Install

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper - Stampede 4x4 Front Wide Blue]]> http://www.hobbypeople.net/index.php/rpm-bumper-stampede-4x4-front-wide-blue.html

RPM RC Stampede 4x4 Wide Front Bumper - Blue

This is an upgraded blue RPM RC wide front bumper for the Traxxas Stampede 4x4. The Traxxas Stampede 4x4 is a cool truck with lots of nice features built in, but it’s missing one critical piece – some serious front-end protection. Not anymore! RPM's Wide Front Bumper for the Traxxas Stampede 4x4 is designed to fill that vacancy. The RPM after market Stampede 4x4 bumper uses the same design principles and styling as those found on their 2wd Stampede Front Bumper, the most popular front bumper RPM has ever produced. Why is it so popular? Because it works!

The RPM Wide Front Bumper is designed to protrude out in front of the truck far enough to be the first contact point during a frontal collision, yet is back far enough not to impede normal driving. When the inevitable front-end impact occurs, the RPM wide bumper will take the brunt of the force, absorbing the impact energy by deforming under the pressure, and then when the crash concludes, the bumper will return to its original shape, ready for action once again. With an RPM Wide Front Bumper installed, more fragile chassis and front differential components have a much better survival rate under even the roughest bash sessions.

RPM Wide Front Bumpers for the Traxxas Stampede 4x4 are stock replacement parts. Simply remove the stock front skid plate, replace it with the RPM version and you're ready to go. It even incorporates the mounting points for the stock upper bumper, if you wish to keep it in place.

Features:

• Molded from High-Strength Composite Plastic

• Improves the Front-End Durability of Your Stampede 4x4

• Direct-Fit Upgrade

• Quick and Easy-to-Install

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper - The Ten-SCTE Rear]]> http://www.hobbypeople.net/index.php/rpm-rear-bumper-the-ten-scte.html

RPM Rear Bumper

for Losi TEN-SCTE

This is an RPM Rear Bumper for the Losi TEN-SCTE. RPM is proud to offer our Rear Bumper for the Losi TEN-SCTE. Aesthetically, it’s the best looking bumper made for this awesome 1:10th scale truck, yet incorporates design elements to make it one of the strongest bumpers available! In comparison to a stock rear bumper, we moved it rearward by a full 1/2" to help reduce the problem of rear impacts destroying bodies. We also moved the top of the bumper up by approximately 7/8", improving rollover protection of the body as well. We’ve added material around the upper screw hole mounting posts to strengthen those otherwise weak areas, too. The mud flaps have been removed from the bumper for those wanting protection without the added weight of the mud flap system.

Features:

• Designed to Absorb Critical Rear Impacts

• Improves Body Protection From Rear Impacts and Rollovers

• Strenghtened Screw Hole Mounting Posts

Fits:

• Losi TEN-SCTE

Price: $11.95 Special Price: $8.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper - Traxxas 1/16 Front Black]]> http://www.hobbypeople.net/index.php/rpm-bumper-traxxas-1-16-front-black.html

 

Price: $8.95 Special Price: $6.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper - Traxxas 1/16 Rear Black]]> http://www.hobbypeople.net/index.php/rpm-bumper-traxxas-1-16-rear-black.html

 

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper B44 Wide Front]]> http://www.hobbypeople.net/index.php/rpm-bumper-b44-wide-front.html

RPM Wide Front Bumper

for Team Associated B44, B44.1 & B44.2 Series Buggies

This is an RPM Wide Front Bumper for Team Associated B44, B44.1 & B44.2 Series Buggies. Quite simply, the stock Associated B44, B44.1 & B44.2 does not have any front-end protection. Any frontal impact is struck directly with the front shock tower, front A-arms or the front differential housing. No longer will that be an issue with an RPM Wide Front Bumper installed!

Each RPM bumper is a full 5” (127mm) wide and extends forward over 1.5” (38.1mm) to protect all those more fragile interior components. RPM nylons are impact absorbing, working similarly to an airbag in a car to slow the vehicle down much more gradually versus that abrupt stop the B44 would typically encounter with stock components. Once the impact energy has been absorbed, the bumper returns back to its original shape, ready for the next major incident. RPM bumpers mount using 4 screws, extending back far enough to protect the leading edge of your expensive chassis and offering serious skid resistance to the bottom of the buggy.

Each RPM Wide Front Bumper for the B44 is molded in black and comes with our limited lifetime breakage warranty. With an RPM bumper leading the charge, you won’t ever have to worry about “nudging” the guy in front of you out of the way!

Features:

• Protect Your B44 Series Buggy From Frontal Impacts

• Also Works As a Front Skid Plate

• Molded From RPM's Impact Absorbing Nylons

• Direct Bolt-On Using Four Mounting Screws

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper Front & Skid Plate - Losi Ten-SCTE]]> http://www.hobbypeople.net/index.php/rpm-front-bumper-skid-plate-ten-scte.html

RPM Front Bumper & Skid Plate

for Losi TEN-SCTE

This is an RPM Front Bumper & Skid Plate for the Losi TEN-SCTE. The RPM Front Bumper & Skid Plate for the Losi TEN-SCTE adds a level of protection unmatched by any other bumper presently available. The RPM Front Bumper mounts further back along the chassis than the stock bumper, covering the entire front end left exposed by the stock bumper, protecting the aluminum chassis from abrasion damage common to this area. Three skid rails are strategically placed along the front of the skid plate to allow the front end of the truck to transition up and over impacted objects easily and with the least amount of friction possible.

The design of the RPM Front Skid Plate removes the stock bumper support ring from the truck, preventing frontal impacts from transferring impact energy into the front shock tower and top end of the gearbox. This allows much more room for the bumper to absorb impact energy when that inevitable head-on collision occurs. By absorbing the impact, less energy is transferred into the chassis, protecting those more fragile internal components from damage.

The RPM front bumper design not only looks awesome, it allows the use of RPM Light Canister sets (RPM #80982 or #80983) for those wanting to run LEDs in their front bumper for unlimited nighttime fun and incredible scale desert truck looks!

The RPM Front Bumper and Skid Plate set for the Losi Ten SCTE is molded from our trademark blend of nylons for incredible durability and unmatched performance. Each package comes complete with all necessary mounting hardware and instructions. Each kit is proudly designed and manufactured in our facility in California, USA.

Features:

• Protects the Aluminum Chassis From Abrasion Damage

• Three Skid Rails Allow the Front of the Truck to Transition Up and Over Impact Objects with Ease

• Positioning of Bumper Improves Durability During Front End Impacts

• Nylon Construction Provides Unmatched Abrasion and Skid Resistance for Longevity and Durability

Fits:

• Losi TEN-SCTE

Price: $12.95 Special Price: $9.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper Front & Skid Plate - Slash Black]]> http://www.hobbypeople.net/index.php/rpm-bumper-front-and-skid-plate-slash-black.html RPM Bumper Front & Skid Plate - Slash Black Theyre here! An all-new bumper design for the Traxxas Slash! RPM's two-piece design is simple, yet strong, effective and highly attractive. They made it a two-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with both the skid plate and bumper installed or if a racing profile is wanted, the front bumper can be removed and the skid plate by itself can be run as a light-weight alternative bumper / skid plate that shreds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, reinstall the bumper and full bash protection is once again available!

Their Traxxas Slash front bumper design completely eliminates the stock chassis-to-bumper support ring and the 5 screws holding the support ring in place. Additionally, the RPM version uses a thicker skid design (more than 60% thicker than the stock skid!) to supply the cushioning resistance a basher-proof bumper needs. Even though their thicker, more stout front bumper and skid plate is significantly stronger and more beefy than stock, it still falls in at a weight that is slightly less than the stock front bumper. So even if the racer wants to run a full RPM front bumper and skid plate, they wont have to worry about adding unwanted weight. To help improve overall durability, RPM's skid rail design is wider than stock, which perfectly matches the design of our front and rear Slash skid plates.

Price: $12.95 Special Price: $9.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper Front & Skid Plate - Slash Blue]]> http://www.hobbypeople.net/index.php/rpm-bumper-front-and-skid-plate-slash-blue.html RPM Bumper Front & Skid Plate - Slash Blue Theyre here! An all-new bumper design for the Traxxas Slash! RPM's two-piece design is simple, yet strong, effective and highly attractive. They made it a two-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with both the skid plate and bumper installed or if a racing profile is wanted, the front bumper can be removed and the skid plate by itself can be run as a light-weight alternative bumper / skid plate that shreds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, reinstall the bumper and full bash protection is once again available!

Their Traxxas Slash front bumper design completely eliminates the stock chassis-to-bumper support ring and the 5 screws holding the support ring in place. Additionally, the RPM version uses a thicker skid design (more than 60% thicker than the stock skid!) to supply the cushioning resistance a basher-proof bumper needs. Even though their thicker, more stout front bumper and skid plate is significantly stronger and more beefy than stock, it still falls in at a weight that is slightly less than the stock front bumper. So even if the racer wants to run a full RPM front bumper and skid plate, they wont have to worry about adding unwanted weight. To help improve overall durability, RPM's skid rail design is wider than stock, which perfectly matches the design of our front and rear Slash skid plates.

Price: $12.95 Special Price: $9.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper Front & Skid Plate - Slash Chrome]]> http://www.hobbypeople.net/index.php/rpm-bumper-front-and-skid-plate-slash-chrome.html

RPM Bumper Front & Skid Plate - Slash Chrome Theyre here! An all-new bumper design for the Traxxas Slash! RPM's two-piece design is simple, yet strong, effective and highly attractive. They made it a two-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with both the skid plate and bumper installed or if a racing profile is wanted, the front bumper can be removed and the skid plate by itself can be run as a light-weight alternative bumper / skid plate that shreds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, reinstall the bumper and full bash protection is once again available!

Their Traxxas Slash front bumper design completely eliminates the stock chassis-to-bumper support ring and the 5 screws holding the support ring in place. Additionally, the RPM version uses a thicker skid design (more than 60% thicker than the stock skid!) to supply the cushioning resistance a basher-proof bumper needs. Even though their thicker, more stout front bumper and skid plate is significantly stronger and more beefy than stock, it still falls in at a weight that is slightly less than the stock front bumper. So even if the racer wants to run a full RPM front bumper and skid plate, they wont have to worry about adding unwanted weight. To help improve overall durability, RPM's skid rail design is wider than stock, which perfectly matches the design of our front and rear Slash skid plates.

Price: $14.89 Special Price: $11.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper Front Blue & Skid Plate - Slash 4x4]]> http://www.hobbypeople.net/index.php/rpm-bumper-front-blue-and-skid-plate-slash-4x4.html

 

Price: $15.95 Special Price: $11.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper Front Chrome & Gray Skid Plate - Slash 4x4]]> http://www.hobbypeople.net/index.php/rpm-bumper-front-chrome-and-gray-skid-plate-slash-4x4.html

 

Price: $17.95 Special Price: $13.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper Front/Skid Plate/Chassis Brace - SC10 Black]]> http://www.hobbypeople.net/index.php/rpm-bumper-front-skid-plate-chassis-brace-sc10-black.html

RPM Bumper Front/Skid Plate/Chassis Brace - SC10 Black RPM is proud to offer a unique front bumper system for the Associated SC10. It is designed with two primary purposes first and foremost is durability while second, it has to look good doing it! RPM's goals have been met with an overwhelming success.

RPM's front bumper system is designed in three pieces. The most critical piece is our unique chassis brace. This brace bolts to the bottom of the chassis using existing holes to help reduce the possibility of chassis breakage through frontal impacts. They achieve this by using 6 mounting points both servo mounting screw holes and all four bulkhead screw holes. By tying in all 6 locations with a stout, molded nylon plate, RPM creates a perfect foundation for the RPM front skid plate.

What's Included:

  • 1 - Front Bumper,
  • 1 - Front Skid Plate,
  • 1 - Chassis Brace,
  • all additional mounting hardware
  • complete instructions.

The new RPM front skid plate ties into the same four bulkhead screw holes as the chassis brace but they went a step further and added two extra skid plate mounting holes to help disperse frontal impact energy over a larger surface area. This design protects the front bulkhead much better than the stock bumper. Additionally, RPM eliminated the stock front bumper loop that ties into the front shock tower. By eliminating that piece, it allows the front bumper much more room to absorb impacts while transferring zero impact energy into the fragile front shock tower. The massive front curve of the skid plate does two things creates a progressive impact zone that steadily absorbs more and more impact energy as the bumper compresses. The curvature also creates a great transitioning surface for those less than stellar landings or unexpected obstacles that pop up in front of the truck.

The final piece to RPM's front bumper set is an already battle-tested front bumper. It is the same bumper as those used on RPM Slash front bumpers. What that means is superb impact absorption combined with the ability to accept RPM light canister sets (RPM #80982 & #80983) for nighttime fun! Thats right, now SC10 owners can light up the night too! Combine RPM front bumper light canisters with an RPM roof-mounted light bar set (RPM #80922, #80923 & #80925) and thats a whopping 10 LEDs worth of night burning light! Want more? How about bolting RPM's Slash rear tail lights (RPM #81030) to the SC10 too? Yes, its possible!

*Light Canister sets sold separately.

Price: $18.89 Special Price: $14.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper Front/Skid Plate/Chassis Brace - SC10 Blue]]> http://www.hobbypeople.net/index.php/rpm-bumper-front-skid-plate-chassis-brace-sc10-blue.html RPM Bumper Front/Skid Plate/Chassis Brace - SC10 Blue RPM is proud to offer a unique front bumper system for the Associated SC10. It is designed with two primary purposes first and foremost is durability while second, it has to look good doing it! RPM's goals have been met with an overwhelming success.

RPM's front bumper system is designed in three pieces. The most critical piece is our unique chassis brace. This brace bolts to the bottom of the chassis using existing holes to help reduce the possibility of chassis breakage through frontal impacts. They achieve this by using 6 mounting points both servo mounting screw holes and all four bulkhead screw holes. By tying in all 6 locations with a stout, molded nylon plate, RPM creates a perfect foundation for the RPM front skid plate.

What's Included:
  • 1 - Front Bumper,
  • 1 - Front Skid Plate,
  • 1 - Chassis Brace,
  • all additional mounting hardware
  • complete instructions.
The new RPM front skid plate ties into the same four bulkhead screw holes as the chassis brace but they went a step further and added two extra skid plate mounting holes to help disperse frontal impact energy over a larger surface area. This design protects the front bulkhead much better than the stock bumper. Additionally, RPM eliminated the stock front bumper loop that ties into the front shock tower. By eliminating that piece, it allows the front bumper much more room to absorb impacts while transferring zero impact energy into the fragile front shock tower. The massive front curve of the skid plate does two things creates a progressive impact zone that steadily absorbs more and more impact energy as the bumper compresses. The curvature also creates a great transitioning surface for those less than stellar landings or unexpected obstacles that pop up in front of the truck.

The final piece to RPM's front bumper set is an already battle-tested front bumper. It is the same bumper as those used on RPM Slash front bumpers. What that means is superb impact absorption combined with the ability to accept RPM light canister sets (RPM #80982 & #80983) for nighttime fun! Thats right, now SC10 owners can light up the night too! Combine RPM front bumper light canisters with an RPM roof-mounted light bar set (RPM #80922, #80923 & #80925) and thats a whopping 10 LEDs worth of night burning light! Want more? How about bolting RPM's Slash rear tail lights (RPM #81030) to the SC10 too? Yes, its possible!

*Light Canister sets sold separately.

Price: $18.89 Special Price: $14.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper Mount - Summit Front Black]]> http://www.hobbypeople.net/index.php/rpm-bumper-mount-summit-front-black.html

 

Price: $6.95 Special Price: $5.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper Rear Blue - SC10 2WD]]> http://www.hobbypeople.net/index.php/rpm-blue-rear-bumper-assoc-sc10-2wd.html

RPM R/C Rear Bumper (Blue)

for Team Associated SC10

This is an RPM R/C Rear Bumper (Blue) for the Team Associated SC10. The RPM Rear Bumper for the Associated SC10 has been extended further rearward by almost 1/2" over the stock bumper, moving it into the primary impact point out back, thereby reducing the likelihood of a rear impact damaging the body. We also raised the top of our bumper to help protect the body when the truck flips over in a crash. Additionally, the RPM SC10 rear bumper has removable mud flap mounts so mud flaps (sold separately) may be run on or off without having to modify the bumper.

The RPM SC10 Rear Bumper is manufactured from our extremely tough blend of proprietary materials right here in the USA and is backed by our industry-leading warranty. Each bumper comes with all necessary mounting hardware and instructions.

Features:

• Bumper Extended 1/2" to Move Primary Impact Point Back to Help Prevent Body Damage

• Top of Bumper is Raised to Help Prevent Body Damage When the Truck Flips

• Featurs Removeable Mud Flap Mounts to Mount Mud Flaps (Sold Separately)

• Molded From RPM R/C's Proprietary Blend of Durable Nylons

Fits:

• Team Associated SC10 2WD

Price: $10.89 Special Price: $8.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper Rear Mount - Losi The Ten-SCTE]]> http://www.hobbypeople.net/index.php/rpm-rear-bumper-mount-the-ten-scte.html

RPM Rear Bumper Mount

for Losi TEN-SCTE

This is an RPM Rear Bumper Mount for the Losi TEN-SCTE. The Losi TEN-SCTE is a wickedly fast short course truck. That type of performance places extra stress on the protective areas of the truck, specifically the front and rear bumpers. The stock bumper mounting system holding the rear bumper in place needs some much needed RPM help. Our rear bumper mount solves this final durability issue.

The RPM Rear Bumper Mount for the Losi TEN-SCTE is designed to absorb critical rear impacts, reducing transferred impact energy that could potentially damage other more fragile internal components. Our four piece design uses multiple curves and spring shapes to absorb those impact energies by distorting upon initial impact, then, unique to RPM engineering grade materials, will return back to its original shape.

Our rear bumper design also incorporates mounting locations for RPM Low Visibility Wheelie Bars (RPM #81312 sold separately). These ingenious wheelie bars tuck up under the bumper, preventing them from detracting from the scale appearance of the truck, yet sit low enough to prevent your rear bumper from dragging on the ground when a little too much throttle sends the front wheels skyward! Combine an RPM Rear Bumper Mount with our #73112 Rear Bumper for the ultimate in rear end protection for your TEN-SCTE!

Features:

• Designed to Absorb Critical Rear Impacts

• Reduces Transferred Impact Energy That Could Potentially Damage Other More Fragile Internal Components

• Four Piece Design Uses Multiple Curves and Spring Shapes to Absorb Impact Energies

• Incorporates Mounting Locations for RPM Low Visibility Wheelie Bars (RPM #81312 Sold Separately)

Fits:

• Losi TEN-SCTE

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper-Rustler/Stampede Blue Fr. Wide]]> http://www.hobbypeople.net/index.php/rpm-bumper-rustler-stampede-blue-fr-wide.html

RPM RC Wide Front Bumper (Blue)

for Traxxas Rustler, Stampede, Nitro Sport and Bandit

This is an RPM RC Wide Front Bumper (Blue) for the Traxxas Rustler, Stampede, Nitro Sport and Bandit. Give that Traxxas Nitro or Electric Rustler, Stampede, Nitro Sport or Bandit added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2" worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons. This bumper will help reduce front end damage during head on collisions with curbs, trees, etc.! Nothing surpasses the protection gained when your Traxxas vehicle is protected with an RPM wide front bumper!

Features:

• Molded from High-Strength Composite Plastic

• Improves the Front-End Durability of Your Vehicle

• Direct-Fit Upgrade

• Quick and Easy-to-Install

• For Use with Traxxas Rustler, Stampede, Nitro Sport and Bandit

Price: $6.95 Special Price: $5.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper/Wheelie Bar Mount - Slash/Rustler Black]]> http://www.hobbypeople.net/index.php/rpm-bumper-wheelie-bar-mount-slash-rustler-black.html RPM Bumper/Wheelie Bar Mount - Slash/Rustler Black After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, RPM found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles using the stock wheelie bar mount. The problem the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution An all-new bumper mounting system that eliminates all of the problems encountered with the stock version.

The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side thats two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate ever! Their mount tucks up quite nicely behind the skid plate for better rear end ground clearance.

This rear bumper / wheelie bar mount fits a wide range of vehicles. It fits all versions of the Traxxas Slash, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions.

Tech Notes: The RPM Rear Bumper Mount replaces Traxxas #3677.

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Bumper/Wheelie Bar Mount - Slash/Rustler Blue]]> http://www.hobbypeople.net/index.php/rpm-bumper-wheelie-bar-mount-slash-rustler-blue.html

RPM Bumper/Wheelie Bar Mount - Slash/Rustler Blue After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, RPM found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles using the stock wheelie bar mount. The problem the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution An all-new bumper mounting system that eliminates all of the problems encountered with the stock version.

The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side thats two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate ever! Their mount tucks up quite nicely behind the skid plate for better rear end ground clearance.

This rear bumper / wheelie bar mount fits a wide range of vehicles. It fits all versions of the Traxxas Slash, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions.

Tech Notes: The RPM Rear Bumper Mount replaces Traxxas #3677.

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Caster Blocks - Electric Stampede, Rustler, Slash]]> http://www.hobbypeople.net/index.php/rpm-caster-blocks-electric-stampede-rustler-slash.html 708712 Caster Blocks - Electric Stampede, Rustler,Slash RPM Caster Blocks for the electric versions of the Traxxas Rustler & Stampede are the final link in for a complete, bulletproof front suspension from RPM for these trucks. RPM Caster Blocks are redesigned to slim down unnecessary bulk while improving strength and durability in this heavily impacted area. These are stock replacement items. No additional parts or modifications are necessary to mount a set to a vehicle.

RPM Caster Blocks are molded in their trademark blend of ultra durable and super strong nylons and backed by the best breakage warranty in the R/C industry. Each package contains one left side and one right side caster block.

Tech Notes: RPM #80712 Caster Blocks replace Traxxas stock #3632 Caster Blocks. RPM Caster Blocks retain stock Rustler & Stampede 30 degree caster settings. Stock Bandit Caster is 25 degrees. These blocks will alter stock Bandit caster settings. These Caster Blocks will not work on nitro versions of the Rustler & Stampede.

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Caster/Steering Blocks - Slash 4x4/Stampede 4x4/Rally]]> http://www.hobbypeople.net/index.php/rpm-caster-steering-blocks-slash-4x4-stampede-4x4-rally.html

RPM RC Caster & Steering Blocks

for Traxxas Slash 4x4 & LCG Kits, Stampede 4x4 & Rally

This is a set of RPM RC Caster & Steering Blocks for the Traxxas Slash 4x4 & LCG Kits, Stampede 4x4 & Rally. Since the release of the first Slash 4x4, RPM customers have been asking for stronger front end components that could handle the punishment Traxxas 4x4 trucks can dish out. RPM answers the call with our Caster & Steering Blocks for these awesome trucks. We started with a blank slate, drew in the necessary design elements and built an all-new design with a focus on punishment survivability. The core design of our caster blocks revolve around the lower-case “H” structure which provides extreme rigidity to keep camber and caster setting locked in place while running normally, yet our materials provide serious impact absorption characteristics to prevent breakage when those “oops” moments inevitably arise.

RPM steering blocks have also been reengineered for durability, strength, rigidity and crash-survivability. More material surrounds the kingpin posts while smoother flowing turnbuckle arms assure consistent feel and performance from the steering system. Our Slash 4x4 / Stampede 4x4 front-end components are made from our trademark blend of indestructible materials and come factory backed by our limited lifetime warranty for strength and durability you know you can trust!

Features:

• Molded from High-Strength Composite Plastic

• Improves the Front-End Durability of Your Vehicle

• Direct-Fit Upgrade

• Quick and Easy-to-Install

• For Use with Traxxas Slash 4x4 & LCG Kits, Stampede 4x4 & Rally

Price: $18.99 Special Price: $14.24

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM ESC Cage -Traxxas VXL-3S ESC-Black]]> http://www.hobbypeople.net/index.php/rpm-esc-cage-traxxas-vxl-3s-esc-black.html

RPM ESC Cage for Traxxas VXL-3S ESC (Black)

This is an RPM ESC Cage for Traxxas VXL-3S ESC (Black). An interesting design idea came in from RPM customer Ryan K. for an electronic speed controller (ESC) cage to help protect and retain the Traxxas VXL-3S ESC (Traxxas #3355X). We were shocked to discover that the primary speed controller shipped with most Traxxas VXL brushless systems has two tiny mounting tabs holding it in place. After some quick research, we found these tabs break off quite often, leading to potential damage of a $220 (SRP) speed control.

Our solution is a simple, yet strong and effective one. We eliminated the use of the two undersized mounting tabs on the ESC in favor of a complete cage system that solidly locks it in place. Our ESC Cage is the most effective, durable and best protection for your speed control possible. By completely surrounding and capturing the VXL-3S ESC, damage from broken tabs and ejection Black ESC Cage for the VXL-3S ESCfrom the vehicle has been completely eliminated.

The RPM VXL-3S ESC Cage works perfectly even if one or both mounting tabs have already been broken or cut off! Now there is no reason to rely on unpredictable adhesives or zip ties to protect and retain your speed controller when our ESC Cage will lock it in place with 100% confidence each and every time!

The  RPM ESC Cage is made from our incredibly strong, ultra lightweight blend of engineering grade nylons and factory-backed by our industry-leading limited lifetime warranty. RPM molded products are made with pride in the USA!

NOTE: ESC NOT INCLUDED!

Features:

• Protect and Retain Your VXL-3S ESC

• Solidly Locks the ESC in Place - No More Broken Mounting Tabs

• Most Effective, Durable and Best Protection for Your ESC

• Works Even When Stock ESC Mounting Tabs are Broken Off

• Made From Incredibly Strong, Lightweight Blend of Engineering-Grade Nylons

*The RPM VXL-3S ESC Cage is designed for the Traxxas VXL-3S ESC (Traxxas #3355X) only. While our ESC Cage will fit a variety of applications, they have been tested and only guaranteed to fit the following vehicles in stock form only - Stampede 4x4, Slash 4x4, Slash 2WD & Rally. Also fits the following vehicles as long as Traxxas #3725 Mounting Plate (stock item on VXL models) is used - Rustler, Stampede 2WD & Bandit.

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Extended Left Rear A-arms - Summit & Revo, Black]]> http://www.hobbypeople.net/index.php/rpm-extended-left-rear-a-arms-traxxas-summit-revo-black.html

RPM Extended Rear A-Arms Black (Left)

for Traxxas Summit, Revo & E-Revo

This is a set of RPM Extended Rear A-Arms Black (Left) for the Summit, Revo & E-Revo. RPM extended rear A-arms are designed around the solid and proven Revo rear A-arm design. That means you get an ultra-lightweight set of A-arms that are nearly indestructible! Each set of RPM extended rear A-arms incorporates all stock geometry including options for either a 10mm or 19mm extension. All RPM molded products are backed by a limited lifetime warranty against breakage and are molded in black or blue. For unmatched performance, durability and reliability you can trustrability, you can’t go wrong with a set of RPM A-arms installed on your ride!

Features:

• Lightweight A-Arms are Nearly Indestructible

• Incorporates All Stock Geometry, Including Options for Either a 10mm or 19mm Extension

• Molded in Black

• Limited Lifetime Warranty Against Breakage

• For Traxxas Summit, Revo and E-Revo Left Rear

Price: $14.95 Special Price: $11.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Extended Left Rear A-arms - Summit & Revo, Blue]]> http://www.hobbypeople.net/index.php/rpm-extended-left-rear-a-arms-traxxas-summit-revo-blue.html

RPM Extended Rear A-Arms Blue (Left)

for Traxxas Summit, Revo & E-Revo

This is a set of RPM Extended Rear A-Arms Blue (Left) for the Summit, Revo & E-Revo. RPM extended rear A-arms are designed around our already solid and proven Revo rear A-arm design. That means you get an ultra lightweight set of A-arms that are nearly indestructible! Each set of RPM extended rear A-arms incorporates all stock geometry including options for either a 10mm or 19mm extension. All RPM molded products are backed by our limited lifetime warranty against breakage and are molded in black or blue. For unmatched performance, reliability you can trust and unmatched durability, you can’t go wrong with a set of RPM A-arms installed on your ride!

Features:

• Lightweight A-Arms are Nearly Indestructible

• Incorporates All Stock Geometry, Including Options for Either a 10mm or 19mm Extension

• Molded in Blue

• Limited Lifetime Warranty Against Breakage

• For Traxxas Summit, Revo and E-Revo Left Rear

Price: $14.95 Special Price: $11.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Extended Right Rear A-arms / Traxxas Summit & Revo,Black]]> http://www.hobbypeople.net/index.php/rpm-extended-right-rear-a-arms-traxxas-summit-revo-black.html

RPM Extended Rear A-Arms Black (Right)

for Traxxas Summit, Revo & E-Revo

This is a set of RPM Extended Rear A-Arms Black (Right) for the Traxxas Summit, Revo & E-Revo. RPM extended rear A-arms are designed around the solid and proven Revo rear A-arm design which means you get an ultra-lightweight set of A-arms that are nearly indestructible! Each set of RPM extended rear A-arms incorporates all stock geometry including options for either a 10mm or 19mm extension. All RPM molded products are backed by their limited lifetime warranty against breakage. For unmatched performance, durability and reliability you can trust, you can’t go wrong with a set of RPM A-arms installed on your ride!

Features:

• Lightweight A-Arms are Nearly Indestructible

• Incorporates All Stock Geometry, Including Options for Either a 10mm or 19mm Extension

• Molded in Black

• Limited Lifetime Warranty Against Breakage

• For Traxxas Summit, Revo and E-Revo Right Rear

Price: $14.95 Special Price: $11.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Extended Right Rear A-arms / Traxxas Summit & Revo,Blue]]> http://www.hobbypeople.net/index.php/rpm-extended-right-rear-a-arms-traxxas-summit-revo-blue.html

RPM Extended Rear A-Arms Blue (Right)

for Traxxas Summit, Revo & E-Revo

This is a set of RPM Extended Rear A-Arms Blue (Right) for the Traxxas Summit, Revo & E-Revo. RPM extended rear A-arms are designed around our already solid and proven Revo rear A-arm design. That means you get an ultra lightweight set of A-arms that are nearly indestructible! Each set of RPM extended rear A-arms incorporates all stock geometry including options for either a 10mm or 19mm extension. All RPM molded products are backed by our limited lifetime warranty against breakage and are molded in black or blue. For unmatched performance, reliability you can trust and unmatched durability, you can’t go wrong with a set of RPM A-arms installed on your ride!

Features:

• Lightweight A-Arms are Nearly Indestructible

• Incorporates All Stock Geometry, Including Options for Either a 10mm or 19mm Extension

• Molded in Blue

• Limited Lifetime Warranty Against Breakage

• For Traxxas Summit, Revo and E-Revo Right Rear

Price: $14.95 Special Price: $11.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Front A-arms / Associated B44, B44.1 & B44.2]]> http://www.hobbypeople.net/index.php/rpm-front-a-arms-associated-b44-b44-1-b44-2.html

RPM Front A-Arms

for Team Associated RC10B44, B44.1 & B44.2 Series Vehicles

This is a pair of RPM Front A-Arms for the Team Associated RC10B44, B44.1 & B44.2 Series Vehicles. RPM A-arms for the Associated B44, B44.1 & B44.2 were designed to solve several customer-related complaints about the stock A-arms. Our first objective with our version of these A-arms was to improve strength and durability without sacrificing rigidity to keep these race-bred machines at the front of the pack. Our design changes still retain all stock suspension geometry, yet have been improved structurally to eliminate potential breakage points. We’ve also eliminated slop at the hinge pins and caster blocks. By tightening up these “loose” areas with our A-arms, the B44’s camber, caster and toe angles are locked in place while improving suspension performance and consistency at the same time.

We also found that the stock anti-sway bar pivot balls molded in the A-arms are .005” (.13mm) undersized. That leads to inadequate performance of the sway-bar system. We rectified that by eliminating the molded ball entirely and replaced it with a more stout, machined pivot ball (not included), with closer tolerances on the ball diameter.

Each RPM A-arm for the B44 is molded in black and comes with our limited lifetime warranty against breakage. When performance counts and the goal is to get across the finish line, you can count on RPM to get you there!

Features:

• Greater Durability Than Stock A-Arms

• Tigher Tolerances Result in a Smooth, Free Moving Suspension with Minimal Slop

• Improved Sway Bar System Performance (Requires Machined Pivot Balls - Not Included)*

• Allows More Consistent Camber and Toe Angle Adjustments

*RPM A-arms for the B44 fit the B44, B44.1 & B44.2. Individuals wanting to run a sway bar system must use any standard 4.3mm ball stud such as Associated #6276. We recommend Associated balls studs for the most consistent diameter but any 4.3mm ball stud with a 4-40 x 1/4" thread will work.

Price: $11.95 Special Price: $8.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Gear Cover - B4/T4 Black]]> http://www.hobbypeople.net/index.php/rpm-gear-cover-b4-t4-black.html

 

Price: $5.95 Special Price: $4.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Gear Cover - B4/T4 Blue]]> http://www.hobbypeople.net/index.php/rpm-gear-cover-b4-t4-blue.html

 

Price: $5.95 Special Price: $4.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Gear Cover - Rstlr/Slash/Stmpd/Bndt Black]]> http://www.hobbypeople.net/index.php/rpm-gear-cover-rstlr-slash-stmpd-bndt-black.html 708399 Gear Cover - Rstlr/Slash/Stmpd/Bndt Black Additional features designed into these gear covers include such important aspects as:
  • An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Our plug stays in place yet is easy to remove and install.
  • Completely sealed. Stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter.
  • Sleek contours that would look great on any vehicle.
  • More clearance for larger pinions for owners hungry for speed.
  • Retains all stock geometry for easy bolt up; no cutting or gluing required.Blue Gear Cover
The most recent electric versions of the Rustler, Stampede, Bandit and Slash have several new features that caused interference issues with the original RPM molded gear cover for the Stampede & Rustler. RPM expanded the area of the gear cover over the motor shaft to compensate for the longer motor shaft of the XL-5 & VXL motors. they narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper / wheelie bar mount as well. These changes now allow this gear cover to fit all versions of these awesome vehicles.

Not only do they look great, they will protect those expensive gears like nothing else available! RPM's new gear cover will pay for itself the very first time you run through the dirt and nothing enters your gear case. No more blown gears from rocks and debris!

Price: $6.95 Special Price: $5.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Gear Cover - Slash/E Rustler/E Stampede/ Bandit]]> http://www.hobbypeople.net/index.php/rpm-gear-cover-slash-e-rustler-e-stampede-bndt.html RPM Gear Cover - Slash/E Rustler/E Stampede/ Bndt The most recent electric versions of the Rustler, Stampede, Bandit and Slash have several new features that caused interference issues with the original RPM molded gear cover for the Stampede & Rustler. RPM expanded the area of the gear cover over the motor shaft to compensate for the longer motor shaft of the XL-5 & VXL motors. they narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper / wheelie bar mount as well. These changes now allow this gear cover to fit all versions of these awesome vehicles.

Not only do they look great, they will protect those expensive gears like nothing else available! RPM's new gear cover will pay for itself the very first time you run through the dirt and nothing enters your gear case. No more blown gears from rocks and debris! Additional features designed into these gear covers include such important aspects as:
  • An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Our plug stays in place yet is easy to remove and install.
  • Completely sealed. Stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter.
  • Sleek contours that would look great on any vehicle.
  • More clearance for larger pinions for owners hungry for speed.
  • Retains all stock geometry for easy bolt up; no cutting or gluing required.Blue Gear Cover

Price: $6.95 Special Price: $5.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Gear Cover / Assoc. SC10B, SC10, T4 & B4, Black]]> http://www.hobbypeople.net/index.php/rpm-gear-cover-assoc-sc10b-sc10-t4-b4-black.html

RPM VTS Clutch Gear Cover (Black)

for Team Associated SC10, SC10B, B4 & T4

This is an RPM VTS Clutch Gear Cover (Black) for the Team Associated SC10, SC10B, B4 & T4. With the advent of the VTS clutch from Associated, older model RPM gear covers would no longer fit over this taller clutch system. This gear cover incorporates clearance for the VTS clutch system while still maintaining the same low profile, super tough characteristics typical of all RPM molded gear covers. RPM gear covers are sealed to prevent debris from clogging up and damaging your gears while the included super soft slipper access plug allows easy access to your slipper adjustment nut. No more hassling with hard plugs that can easily fall out, leaving your gears exposed to the elements.

RPM gear covers are sold with all necessary mounting hardware and are manufactured from our trademark blend of incredibly tough nylons and backed by our limited lifetime warranty against breakage. Nothing else protects like RPM!

Features:

• Fits VTS and Single Slipper Clutch Systems

• Super Soft Access Plug Allows Easy Access to Slipper Adjustment Nut

• Molded From Incredibly Tough Nylons and Includes Limited Lifetime Warranty Against Breakage

Fits:

• Team Associated SC10, SC10B, B4 and T4 Series Vehicles

Price: $6.95 Special Price: $5.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Gear Cover/ SC10B,SC10,T4 & B4 Blue]]> http://www.hobbypeople.net/index.php/rpm-gear-cover-sc10b-sc10-t4-b4-blue.html

RPM VTS Clutch Gear Cover (Blue)

for Team Associated SC10, SC10B, B4 & T4

This is an RPM VTS Clutch Gear Cover (Blue) for the Team Associated SC10, SC10B, B4 & T4. With the advent of the VTS clutch from Associated, older model RPM gear covers would no longer fit over this taller clutch system. This gear cover incorporates clearance for the VTS clutch system while still maintaining the same low profile, super tough characteristics typical of all RPM molded gear covers. RPM gear covers are sealed to prevent debris from clogging up and damaging your gears while the included super soft slipper access plug allows easy access to your slipper adjustment nut. No more hassling with hard plugs that can easily fall out, leaving your gears exposed to the elements.

RPM gear covers are sold with all necessary mounting hardware and are manufactured from our trademark blend of incredibly tough nylons and backed by our limited lifetime warranty against breakage. Nothing else protects like RPM!

Features:

• Fits VTS and Single Slipper Clutch Systems

• Super Soft Access Plug Allows Easy Access to Slipper Adjustment Nut

• Molded From Incredibly Tough Nylons and Includes Limited Lifetime Warranty Against Breakage

Fits:

• Team Associated SC10, SC10B, B4 and T4 Series Vehicles

Price: $6.95 Special Price: $5.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Hub Carriers - SC10/T4/B4/B44 Rear]]> http://www.hobbypeople.net/index.php/rpm-hub-carriers-sc10-t4-b4-b44-rear.html

RPM steps up to deliver a superior axle carrier design while using the larger outer bearings found in Associated’s #9730 axle carriers (common to some B4’s and all B44’s). The larger outer bearing supports the axle better, providing over 1/16” more axle contact than two 3/16” x 3/8” standard bearings, for smoother, longer lasting performance. With the larger outer bearing and RPM proprietary materials, RPM found the perfect blend of strength and durability for a whole range of Associated 1/10th scale electric vehicles!

Price: $10.95 Special Price: $8.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Hub Carriers - Slash/E-Rustler/E-Stampede Rear]]> http://www.hobbypeople.net/index.php/rpm-hub-carriers-slash-e-rustler-e-stampede-rear.html RPM Hub Carriers - Slash/E-Rustler/E-Stampede Rear When your stock 5mm x 8mm bushings have worn out and your equally small bearings keep blowing up, RPM's oversized bearing carriers are there to save you. These carriers allow the use of massive 5mm x 11mm bearings (the same used in stock nitro Rustler / Stampede trucks) to be installed on your E-version. Improved performance, less rolling resistance and less maintenance are all characteristics you can expect from these carriers and larger bearings.

Tech Note: 5 x 11mm. Bearings are not included with these kits (4 bearings are needed for each kit). VXL & Slash owners: Your truck comes stock with 5x11mm bearings.

RPM Recommendations: To prolong the life of your bearings, RPM recommends the use of their #81170 Bearing Blaster. For accurate camber adjustments, please consider the use of RPM #70992 Camber Gauge.

Price: $8.95 Special Price: $6.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Hub Carriers - Slash2WD/E-Rustler/E-Stampede Front]]> http://www.hobbypeople.net/index.php/rpm-hub-carriers-slash-e-rustler-e-stampede-front.html RPM Hub Carriers - Slash/E-Rustler/E-Stampede Front When your stock 5mm x 8mm bushings have worn out and your equally small bearings keep blowing up, RPM's oversized bearing carriers are there to save you. These carriers allow the use of massive 5mm x 11mm bearings (the same used in stock nitro Rustler / Stampede trucks) to be installed on your E-version. Improved performance, less rolling resistance and less maintenance are all characteristics you can expect from these carriers and larger bearings.

Tech Note: 5 x 11mm. Bearings are not included with these kits (4 bearings are needed for each kit). VXL & Slash owners: Your truck comes stock with 5x11mm bearings.

RPM Recommendations: To prolong the life of your bearings, RPM recommends the use of their #81170 Bearing Blaster. For accurate camber adjustments, please consider the use of RPM #70992 Camber Gauge.

Price: $8.95 Special Price: $6.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Hybrid Gearbox Housing - Slash2WD/ Stmp-Rus-Ban2WD Blk]]> http://www.hobbypeople.net/index.php/rpm-hybrid-gearbox-housing-slash-2wd-black.html

RPM Hybrid Gearbox Housing and Rear Mounts (Black)

for Traxxas Slash, Stampede, E-Rustler and Bandit

This is an RPM Gearbox Housing and Rear Mounts for Traxxas Slash, Stampede, E-Rustler and Bandit. The RPM Hybrid Gearbox Housing and Rear Mounts for Traxxas 2WD vehicles is designed to solve a multitude of issues with stock and other after-market transmission housings. Our gearbox housing and mounts are a blend of aluminum and molded nylon parts for the perfect combination of strength, durability and heat dissipation. Check out this awesome list of included features:

Aluminum Motor Plate:

• Manufactured in the USA from 3mm thick, 6061 T6 aluminum for serious strength and durability.

• Locks in gear mesh for worry-free pinion to spur settings, eliminating fears of exploding spur and pinion gears from an overheated stock transmission case.

• Offers significant motor heat dissipation for cooler motor temperatures, unlike stock plastic motor plates that insulate the motor. Not integrated with the rear bumper mounts, meaning rear impacts will not bend the motor plate, (when used with a rear bumper or bumper mounting system such as RPM #80902 or #80905).

Molded Gearbox Housings:

• Molded from our blend of bulletproof nylons in three popular color choices for guaranteed durability, strength and style. Retains stock bumper mounting holes for positive, solid support of any bumper or wheelie bars you may choose. Retains a stock "cover" for the motor, adding motor protection where most aftermarket housings leave the motor completely exposed to rear impacts.

• We modified our housing to eliminate the huge bottom hole in the stock housing, keeping your internal gears cleaner, longer.

• Quiet! With a completely enclosed gearbox housing, you’ll no longer have the loudest transmission on the track. Redesigned exterior features are smoother, making it less likely dirt will adhere or build up on the case.

• Separate housing and rear mounts means transmission maintenance won’t affect suspension settings.

Molded Rear Mounts (0° & 3° Rear Mounts Included):

• Separate from the gearbox housing and easy to access. Each mount is individually accessible and removable without removing the transmission or vice versa. Simply unbolt 2 screws (and a hinge pin) to remove an A-arm mount or 6 screws to remove the transmission!

• Sold with two sets of rear mounts in each package - 0° and 3° rear mounts are included.

• Molded from the RPM blend of ultra durable, long lasting, bulletproof nylons.

• Molded mounts means tighter tolerances and less slop than with machined components for better camber and toe angle retention.

What's Included:

• Gearbox Housing Halves (Black)

• Motor Plate

• 0º and 3º Molded Rear A-Arm Mounts

• Gearbox Mounting Hardware and Instructions

*RPM Gearbox Housings do not include internal components (gears bearings, shafts, etc.). Internal components (either stock or aftermarket) must be transferred to the RPM Gearbox Housing from the stock Traxxas transmission.

Price: $28.99 Special Price: $21.74

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Light Bar Set - Narrow Roof-Mounted Black]]> http://www.hobbypeople.net/index.php/rpm-light-bar-set-narrow-roof-mounted-black.html RPM Light Bar Set - Narrow Roof-Mounted Black The RPM Narrow Roof-Mounted Light Bar Set cuts a full 2 off of the bigger set, reducing the number of LED light canisters to four and allows virtually anyone running a vehicle with a minimum 4 body width to run LED lights.

The Light Bar Set uses a hinged system that allows the light bar to fold against the body to help reduce impact damage. The light set is designed to bolt to the front windshield of the truck (although with sufficient room, it can be mounted to the rear window as well), keeping the profile low and in the perfect position to light up the night. Each kit comes with a pair of large backing plates that help protect the body where the screws hold the light bar in place.

Each kit comes with all necessary mounting hardware, light canisters, molded parts and instructions. The instructions also show how to easily create your own LED light set-up with a few basic electronics skills, some tools and a little patience.

Price: $15.95 Special Price: $11.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Light Bar Set - SC Bodies Roof-Mounted Black]]> http://www.hobbypeople.net/index.php/rpm-light-bar-set-sc-bodies-roof-mounted-black.html RPM Light Bar Set - SC Bodies Roof-Mounted Black The Roof-Mounted Light Bar Set looks just like the roof light sets of current Baja 1000 trucks. It incorporates six light canisters (the same used in the front bumper light set of RPM #80982 & #80983). Each canister holds a high-intensity 3mm LED (not included) for the ultimate in nighttime off-road racing.

The light sets will fit all current 1/10th-scale and most 1/8th-scale Short Course-style bodies (with a minimum 6" roof width), such as the Traxxas Slash, Associated SC10, Losi Strike & HPI Blitz.

Includes:
  • 1 Light Bar
  • Canister Mounting Plate
  • 2 Body Mounts with Backing Plates
  • 6 Light Canisters
  • 6 Lenses
  • 6 Light Guards
  • 1 Mounting Hole Drill Template
  • All necessary hardware and complete assembly instructions

LED lights are NOT included.

Chrome light bars come with chrome light canisters. Both black and blue light bars come with black light canisters. In the event of a roll-over, the hinge-based light bar will collapse against the body to help reduce impact damage. The light set is designed to bolt to the front windshield of the truck (although with sufficient room, it can be mounted to the rear window as well), keeping the profile low and in the perfect position to light up the night! A pair of large backing plates are supplied that help protect the body where the screws hold the light bar in place.

Each kit comes complete with all necessary mounting hardware, light canisters, molded parts and instructions. The instructions also show how to easily create your own LED light set-up with a few basic electronics skills, some tools and a little patience.

Due to the scale appearance of this light bar set, RPM RC cannot properly strengthen all aspects of the lights. Therefore, some warranty restrictions may apply. See instructions for complete details.

Price: $18.95 Special Price: $14.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Light Bar Set - SC Bodies Roof-Mounted Blue]]> http://www.hobbypeople.net/index.php/rpm-light-bar-set-sc-bodies-roof-mounted-blue.html

RPM Light Bar Set - SC Bodies Roof-Mounted Blue The Roof-Mounted Light Bar Set looks just like the roof light sets of current Baja 1000 trucks. It incorporates six light canisters (the same used in the front bumper light set of RPM #80982 & #80983). Each canister holds a high-intensity 3mm LED (not included) for the ultimate in nighttime off-road racing.

The light sets will fit all current 1/10th-scale and most 1/8th-scale Short Course-style bodies (with a minimum 6" roof width), such as the Traxxas Slash, Associated SC10, Losi Strike & HPI Blitz.

Includes:

  • 1 Light Bar
  • Canister Mounting Plate
  • 2 Body Mounts with Backing Plates
  • 6 Light Canisters
  • 6 Lenses
  • 6 Light Guards
  • 1 Mounting Hole Drill Template
  • All necessary hardware and complete assembly instructions


LED lights are NOT included.

Chrome light bars come with chrome light canisters. Both black and blue light bars come with black light canisters.

Price: $18.95 Special Price: $14.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Light Bar Set - SC Bodies Roof-Mounted Chrome]]> http://www.hobbypeople.net/index.php/rpm-light-bar-set-sc-bodies-roof-mounted-chrome.html

RPM Light Bar Set - SC Bodies Roof-Mounted Chrome The Roof-Mounted Light Bar Set looks just like the roof light sets of current Baja 1000 trucks. It incorporates six light canisters (the same used in the front bumper light set of RPM #80982 & #80983). Each canister holds a high-intensity 3mm LED (not included) for the ultimate in nighttime off-road racing.

The light sets will fit all current 1/10th-scale and most 1/8th-scale Short Course-style bodies (with a minimum 6" roof width), such as the Traxxas Slash, Associated SC10, Losi Strike & HPI Blitz.

Includes:

  • 1 Light Bar
  • Canister Mounting Plate
  • 2 Body Mounts with Backing Plates
  • 6 Light Canisters
  • 6 Lenses
  • 6 Light Guards
  • 1 Mounting Hole Drill Template
  • All necessary hardware and complete assembly instructions


LED lights are NOT included.

Chrome light bars come with chrome light canisters. Both black and blue light bars come with black light canisters. In the event of a roll-over, the hinge-based light bar will collapse against the body to help reduce impact damage. The light set is designed to bolt to the front windshield of the truck (although with sufficient room, it can be mounted to the rear window as well), keeping the profile low and in the perfect position to light up the night! A pair of large backing plates are supplied that help protect the body where the screws hold the light bar in place.

Each kit comes complete with all necessary mounting hardware, light canisters, molded parts and instructions. The instructions also show how to easily create your own LED light set-up with a few basic electronics skills, some tools and a little patience.

Due to the scale appearance of this light bar set, RPM RC cannot properly strengthen all aspects of the lights. Therefore, some warranty restrictions may apply. See instructions for complete details.

Price: $19.99 Special Price: $14.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Light Canister Set - Slash RPM Front Bumper Black]]> http://www.hobbypeople.net/index.php/rpm-light-canister-set-slash-rpm-front-bumper-black.html

RPM Light Canister Set - Slash RPM Front Bumper Black The Light Canister Set is designed to give the appearance of a Baja Desert Truck with its scale off-road light design. Each of its four lights is modeled after a full-sized, 6 off-road light. Each individual light comes with a light canister (or housing), a clear lens and a light guard.

The 4-light set also comes with a unique mounting plate that allows all four lights to sit centered in perfect symmetry within the upper and lower bars of the RPC-RC Slash front bumper.

Each of the four light canisters come set-up for a 3mm LED light (not included). The instructions show a simple method to install a set of four LEDs in the canisters. RPM-RC calculations show that adding four 3mm LEDs and tying the power source directly into the main battery pack creates a minimal draw of power (only 40mAh) .For the ultimate in scale-realism, there is nothing better than the RPM Light Canister set. They are available in classic black or bright chrome. Either looks incredible on the truck and adds the finishing touch to any concourse winning paint job! What's Included: The RPM Light Canister Set includes:

  • 4 Light Canisters
  • 4 Light Guards
  • 4 Clear Lenses
  • 1 - Light Mount
  • 4 - 3x8mm Flathead Screws
  • Complete instructions


LED lights are not included.

Price: $12.89 Special Price: $9.67

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Light Canister Set - Slash RPM Front Bumper Chrome]]> http://www.hobbypeople.net/index.php/rpm-light-canister-set-slash-rpm-front-bumper-chrome.html

RPM Light Canister Set - Slash RPM Front Bumper Chrome The Light Canister Set is designed to give the appearance of a Baja Desert Truck with its scale off-road light design. Each of its four lights is modeled after a full-sized, 6 off-road light. Each individual light comes with a light canister (or housing), a clear lens and a light guard.

The 4-light set also comes with a unique mounting plate that allows all four lights to sit centered in perfect symmetry within the upper and lower bars of the RPC-RC Slash front bumper.

Each of the four light canisters come set-up for a 3mm LED light (not included). The instructions show a simple method to install a set of four LEDs in the canisters. RPM-RC calculations show that adding four 3mm LEDs and tying the power source directly into the main battery pack creates a minimal draw of power (only 40mAh) .For the ultimate in scale-realism, there is nothing better than the RPM Light Canister set. They are available in classic black or bright chrome. Either looks incredible on the truck and adds the finishing touch to any concourse winning paint job! What's Included: The RPM Light Canister Set includes:

  • 4 Light Canisters
  • 4 Light Guards
  • 4 Clear Lenses
  • 1 - Light Mount
  • 4 - 3x8mm Flathead Screws
  • Complete instructions


Bumper and LED lights are not included.

Price: $14.89 Special Price: $11.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Long Shank Rod Ends (12) - Losi/Assoc]]> http://www.hobbypeople.net/index.php/rpm-long-shank-rod-ends-12-losi-assoc.html RPM Long Shank Rod Ends (12) - Losi/Assoc

These are (12) long Heavy duty rod ends that can be used on theRC10 and Losi series of cars.

Price: $4.95 Special Price: $3.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Mini Front Bumper Black- B4/T4]]> http://www.hobbypeople.net/index.php/rpm-mini-front-bumper-black-b4-t4.html

This is an optional RPM Mini Front Bumper. This bumper is compatible with the Associated B4, T4 and GT2 vehicles, as well as the HPI Firestorm family of vehicles. Race oriented Associated GT2, B4 & T4 owners prefer lightweight, yet effective parts. Weighing in at a mere 5-3/4 grams, it is small in size but big on performance. This mini bumper is 30% thicker than the stock skid plate providing tons of extra skid and impact resistance. The RPM mini bumper extends in front of the vehicle and curves up into a 2” wide bumper that actually performs as a bumper. It protects both the chassis and the hinge pins from frontal impacts and acts as a low-friction skid plate. RPM mini bumpers also use all four bulkhead mounting screws to disperse impacts over a larger area reducing transferred impact forces by over 50%! As a finishing touch, RPM mini bumpers have recessed mounting holes so all those nasty scrapes and crashes will be absorbed by the bumper, not the screw heads!

Features:

  • Lightweight design (5.75 grams)
  • 30% thicker than the stock skid plate
  • Reduces impact forces by half
  • 2” wide bumper protects the chassis and hinge pins from frontal impact
  • Acts as a low-friction skid plate

Price: $4.95 Special Price: $3.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Mock Side Exhaust Tips - Chrome]]> http://www.hobbypeople.net/index.php/rpm-mock-side-exhaust-tips-chrome.html

RPM R/C Side Mock Exhaust Tips (Chrome)

This is a set of two RPM R/C Side Mock Exhaust Tips (Chrome). They’re what set a custom ride apart from the common, everyday vehicle. Details are what get the attention focused on you and not your competitor. And details are what brought us to build a set of custom mock through-the-body side exhaust tips that add that extra level of scale realism to your favorite 1/10th scale vehicle. RPM exhaust tips look fantastic on everything from Short Course trucks to on-road sedans to late model dirt oval vehicles, so no matter what you’re running, they’ll add that level of detail your ride has been missing!

Through-the-body mock exhaust tips are a simple, ultra-lightweight scale accessory designed to look like a set of side exhaust pipes are cut through the body, exiting from some custom flanges that provide a detailed, 3D oval exhaust appearance. Each pipe tip is modeled after a full-sized 3” exhaust, cut on a 45° angle. The flange surrounding the pipe is a clever design that supports the pipe, yet provides a shoulder for the body mount to keep the pipe in place. It’s all backed by a support plate behind the body, held in place with a single 3mm flathead screw.

Through-the-Body Mock Side Exhaust Tip kit is made in the USA and comes with 2 complete exhaust tips (one set for each side of the body) and instructions for properly mounting the tips to the body. Simply cut a small oval hole in the body using the supplied template and install. Simple. Easy. Awesome!

Features:

• Add Custom Detail to Your Body

• Great for Short Course Trucks and On-Road Sedans

• Simple, Ultra-Lightweight Scale Accessory

• Chrome Plated

• Includes One Set of Two (One for Each Side of Your Body)

Price: $10.95 Special Price: $8.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Mock Side Exhaust Tips-Black]]> http://www.hobbypeople.net/index.php/rpm-mock-side-exhaust-tips-black.html

RPM R/C Side Mock Exhaust Tips (Black)

This is a set of two RPM R/C Side Mock Exhaust Tips (Black). They’re what set a custom ride apart from the common, everyday vehicle. Details are what get the attention focused on you and not your competitor. And details are what brought us to build a set of custom mock through-the-body side exhaust tips that add that extra level of scale realism to your favorite 1/10th scale vehicle. RPM exhaust tips look fantastic on everything from Short Course trucks to on-road sedans to late model dirt oval vehicles, so no matter what you’re running, they’ll add that level of detail your ride has been missing!

Through-the-body mock exhaust tips are a simple, ultra-lightweight scale accessory designed to look like a set of side exhaust pipes are cut through the body, exiting from some custom flanges that provide a detailed, 3D oval exhaust appearance. Each pipe tip is modeled after a full- sized 3” exhaust, cut on a 45° angle. The flange surrounding the pipe is a clever design that supports the pipe, yet provides a shoulder for the body mount to keep the pipe in place. It’s all backed by a support plate behind the body, held in place with a single 3mm flathead screw.

Through-the-Body Mock Side Exhaust Tip kit is made in the USA and comes with 2 complete exhaust tips (one set for each side of the body) and instructions for properly mounting the tips to the body. Simply cut a small oval hole in the body using the supplied template and install. Simple. Easy. Awesome!

Features:

• Add Custom Detail to Your Body

• Great for Short Course Trucks and On-Road Sedans

• Simple, Ultra-Lightweight Scale Accessory

• Molded in Black

• Includes One Set of Two (One for Each Side of Your Body)

Price: $8.95 Special Price: $6.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM MONSTER Camber Gauge]]> http://www.hobbypeople.net/index.php/rpm-monster-camber-gauge.html

RPM MONSTER Camber Gauge

The Monster Camber Gauge is capable of measuring the camber angle on tires up to 6.5 inches and taller (depending upon the belly height of the tire) and as small as 2 inches in diameter. The Monster Camber Gauge shares all of the same characteristics of its smaller brother camber accuracy to within of a degree, ease of use, and affordability. Similar to its little brother, the Monster Camber Gauge can measure camber angles way beyond a realistic and usable range (positive or negative 10 degrees!) for universal versatility.

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Motor Protector - Rustler/Stampede Black]]> http://www.hobbypeople.net/index.php/rpm-motor-protector-rustler-stampede-black.html RPM Motor Protector - Rustler/Stampede Black Many Traxxas electric vehicles have a motor that is dangerously exposed to impacts and damage from rear impacts or collisions. RPM's new rear Motor Protector eliminates that problem! They started with an RPM rear bumper mount / wheelie bar mount (RPM #80902 or #80905) and extended the reach with this simple add-on piece, which completely blocks the motor from most rear impacts. A stock Traxxas rear bumper mount / wheelie bar mount - Traxxas #3677 - can be used with this motor protector as well.

Traxxas Slash owners running in the unlimited class or those that simply want to drop a huge amount of rear end weight can eliminate the stock rear bumper and mount the RPM Motor Protector in place of the stock bumper to prevent damage to the end-bell and motor.

For the ultimate in rear end protection, a second motor protector can be bolted to the opposite side of the rear bumper mount / wheelie bar mount (gear cover side) to help protect the gears and gear cover from extreme rear-end impacts.

The RPM motor protector can be used on any vehicle that can run the Traxxas #3677 rear bumper mount / wheelie bar mount including the Bandit, e-Stampede, e-Rustler & Slash as well as a number of Traxxas legacy models. Their Motor Protector is molded from our ultra-durable blend of nylons and is backed by our limited lifetime warranty.

Tech Notes: The RPM Motor Protector cannot be used in conjunction with a Slash rear bumper or Traxxas wheelie bar. It must be used in place of either the bumper or wheelie bar. A Traxxas rear bumper mount / wheelie bar mount (Traxxas #3677) or an RPM rear bumper / wheelie bar mount (RPM #80902 or #80905) must be installed prior to installing the RPM Motor Protector (not included).

Price: $6.95 Special Price: $5.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Mud Flap & Number Plate - RPM SC10 2WD Rr Bumper Only]]> http://www.hobbypeople.net/index.php/rpm-mud-flap-and-number-plate-kit-rpm-sc10-2wd-rr-bumper-only.html

RPM Mud Flap & Number Plate Kit

for use with RPM rear bumpers only

The RPM Mud Flaps and Number Plate kit is designed to add that element of scale realism, yet still allow the versatility to remove the mud flaps when they're not needed. Each kit complements RPM's #70122 or #70125 SC10 Rear Bumpers perfectly.

As everyone knows, every full sized short course truck racing today has a rear number plate (a feature not yet found on any current R/C short course vehicle) so it was only natural that the RPM SC10 2wd Rear Bumper should have that option as well (number decals not included).

Each RPM Mud Flaps and Number Plate kit comes will all necessary mounting hardware and complete instructions for easy installation on an RPM SC10 2wd Rear Bumper (sold separately).

RPM Mud Flaps and Number Plate kits are manufactured in the USA and made from RPM's ultra durable materials for unmatched strength and durability.

Tech Notes: RPM Mud Flaps and Number Plate kits are for use with RPM SC10 2wd Rear Bumpers only. They will not work with stock Associated or other aftermarket rear bumpers.

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Mud Flap & Number Plate Kit - Losi The Ten-SCTE]]> http://www.hobbypeople.net/index.php/rpm-mud-flap-number-plate-kit-the-ten-scte.html

RPM Mud Flaps & Number Plate Kit

for Losi TEN-SCTE

This is an RPM Mud Flaps & Number Plate Kit for the Losi TEN-SCTE. Our Mud Flaps & Number Plate Kit is an accessory item to add that level of detail unmatched by stock or any other design. RPM Mud Flaps are molded in a soft rubber compound to keep debris from flying from the tires while still having enough flexibility to leave the suspension unaffected when they touch the ground. The mounting holes of the mud flap support arms place the mud flaps at an angled 15°, mimicking a few renegade full-sized short course trucks currently in popular racing series. The unusual mud flap angle adds class-leading character to this already cool truck.

Unique to RPM rear bumpers is our number plate*. It mimics common full-sized short course trucks where it is a necessity to have a rear number plate visible, adding to that full-scale realism we’ve come to love about R/C short course trucks.

Features:

• Adds Unmatched Detail to Your SCT

• Mudflaps are Molded in a Soft Rubber Compound

• Angled Mud Flaps Mimick Renegade Full-Size SCTs Currently in Popular Racing Series

• Molded Number Plate* for Full-Scale Realism

• Includes Required Mounting Hardware

Fits:

• Losi TEN-SCTE

*Number plate decals not included.

**Mud flaps shown installed on the RPM rear bumper for illustrative purposes only. Rear bumper and number plate decal not included.

Price: $11.95 Special Price: $8.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Mud Flaps - Slash]]> http://www.hobbypeople.net/index.php/rpm-mud-flaps-slash.html RPM Mud Flaps - Slash The Traxxas Slash is arguably one of the best and most authentic replicas of a modern Short Course Truck. Unfortunately, it lacks in a critical detail that many other manufacturers have incorporated into their trucks - mud flaps!

That is no longer an issue! RPM now has a mud flap system that integrates with their Rear Bumper for the Traxxas Slash (RPM #81002, #81003 & #81005). The RPM Mud Flap System uses a pair of molded nylon support arms that bolt to pre-existing holes in the RPM bumper supports of their Slash rear bumpers. These support arms hold a set of well-designed rubber mud flaps that incorporate the molded RPM Logo on one side and are blank on the other. One final touch is a pair of molded screw supports that help prevent the screws from pulling through the soft rubber of the mud flaps.

Tech Notes: The RPM Mud Flap System is designed to work with RPM Rear Bumpers for the Traxxas Slash only (RPM #81002, #81003 & #81005). They will not work with stock or other aftermarket rear bumpers.

Price: $10.89 Special Price: $8.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Nerf Bars - Slash/Slash 4x4 Black]]> http://www.hobbypeople.net/index.php/rpm-nerf-bars-slash-slash-4x4-black.html

 

Price: $7.95 Special Price: $5.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Nerf Bars - Slash/Slash 4x4 Blue]]> http://www.hobbypeople.net/index.php/rpm-nerf-bars-slash-slash-4x4-blue.html

 

Price: $7.95 Special Price: $5.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Nerf Bars Slash 4x4 LCG Black]]> http://www.hobbypeople.net/index.php/rpm-nerf-bars-slash-4x4-lcg-black.html

RPM Nerf Bars (Black)

for Traxxas 1/10th Scale Rally & LCG Slash 4x4

This is a set of RPM Nerf Bars (Black) for the Traxxas 1/10th Scale Rally & LCG Slash 4x4. The chassis layouts of the 1/10th scale Rally & Slash 4x4 changed the original design of the stock nerf bars, making our currently available nerf bars unusable with these models. Our LCG nerf bars fix that problem and are a direct, perfect fit!

RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to the chassis. The additional cross bracing optimizes the rigidity while absorbing additional impact energy anything less than RPM would have crumpled under!

RPM Nerf Bars are stock replacement parts and work with all stock Traxxas chassis running Traxxas #7423 nerf bars. RPM Nerf Bars are proudly made in the USA, molded from our engineering grade nylons and backed by our limited lifetime warranty against breakage.

Features:

• Direct Fit for Traxxas 1/10th Scale Rally and LCG Slash 4x4

• Added Structural Support to Help Strengthen the Body and Reduce Impacts to the Chassis

• Additional Cross Bracing Optimizes Rigidity

• Made in the U.S.A. From Engineering Grade Nylons

• Limited Lifetime Warranty Against Breakage

Price: $8.95 Special Price: $6.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Nerf Bars Slash 4x4 LCG Blue]]> http://www.hobbypeople.net/index.php/rpm-nerf-bars-slash-4x4-lcg-blue.html

RPM Nerf Bars (Blue)

for Traxxas 1/10th Scale Rally & LCG Slash 4x4

This is a set of RPM Nerf Bars (Blue) for the Traxxas 1/10th Scale Rally & LCG Slash 4x4. The chassis layouts of the 1/10th scale Rally & Slash 4x4 changed the original design of the stock nerf bars, making our currently available nerf bars unusable with these models. Our LCG nerf bars fix that problem and are a direct, perfect fit!

RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to the chassis. The additional cross bracing optimizes the rigidity while absorbing additional impact energy anything less than RPM would have crumpled under!

RPM Nerf Bars are stock replacement parts and work with all stock Traxxas chassis running Traxxas #7423 nerf bars. RPM Nerf Bars are proudly made in the USA, molded from our engineering grade nylons and backed by our limited lifetime warranty against breakage.

Features:

• Direct Fit for Traxxas 1/10th Scale Rally and LCG Slash 4x4

• Added Structural Support to Help Strengthen the Body and Reduce Impacts to the Chassis

• Additional Cross Bracing Optimizes Rigidity

• Made in the U.S.A. From Engineering Grade Nylons

• Limited Lifetime Warranty Against Breakage

Price: $8.95 Special Price: $6.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Precision Camber Gauge]]> http://www.hobbypeople.net/index.php/rpm-precision-camber-gauge.html RPM Precision Camber Gauge

Precision Camber Gauge

One of the most critical adjustments on a R/C vehicle is the vehicles camber. RPM has proven time after time that even the most experienced drivers cannot set their camber by eye. With the Camber Gauge, novice to professional drivers alike can set their camber on all wheels to less than one degree of accuracy! Once camber has been set and documented, this gauge will be able to tell you if a crash has affected your camber! When used in conjunction with 7049 toe-in gauge, youll gain a distinct advantage over anyone that does not have our gauges! Other manufacturers have camber fixtures available but RPMs gauge is the only one that allows you to do track side checks in a matter of seconds!

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Revolver 2.2'' Black Truck Wheels]]> http://www.hobbypeople.net/index.php/rpm-revolver-2-2-black-truck-wheels.html

RPM Revolver 2.2" Black Truck Wheels Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! RPM Revolvers for 1/10th scale trucks are scaled up versions of their Revolvers for 1/18th scale trucks. These larger versions have the same great looks, ultra-lightweight, and rugged durability of their little brothers but fit many of the most popular 1/10th scale trucks available today. Features include a 10-hole pattern blended perfectly with a sweeping dished face while the front edge features 30 faux rivets and a simulated 5 lug bolt pattern for a more authentic, scale appearance.

Price: $7.95 Special Price: $5.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Revolver 2.2'' Black Truck Wheels]]> http://www.hobbypeople.net/index.php/rpm-revolver-2-2-black-truck-wheels-33796.html

RPM Revolver 2.2" Black Truck Wheels Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! RPM Revolvers for 1/10th scale trucks are scaled up versions of their Revolvers for 1/18th scale trucks. These larger versions have the same great looks, ultra-lightweight, and rugged durability of their little brothers but fit many of the most popular 1/10th scale trucks available today. Features include a 10-hole pattern blended perfectly with a sweeping dished face while the front edge features 30 faux rivets and a simulated 5 lug bolt pattern for a more authentic, scale appearance.

Price: $7.95 Special Price: $5.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Revolver Wheels - E-Rustler/E-Stampede Front Black]]> http://www.hobbypeople.net/index.php/rpm-revolver-wheels-e-rustler-e-stampede-front-black.html

RPM Revolver Wheels - E-Rustler/E-Stampede Front Black Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! Their Revolvers for 1/10th scale trucks are scaled up versions of the Revolvers for 1/18th scale trucks. These larger versions have the same great looks, ultra-lightweight, and rugged durability of their little brothers but fit many of the most popular 1/10th scale trucks available today. Features include a 10-hole pattern blended perfectly with a sweeping dished face while the front edge features 30 faux rivets and a simulated 5 lug bolt pattern for a more authentic, scale appearance. Concours-winning looks are a trip to your local hobby shop away!

Price: $7.95 Special Price: $5.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Revolver Wheels - E-Rustler/E-Stampede Rear Black]]> http://www.hobbypeople.net/index.php/rpm-revolver-wheels-e-rustler-e-stampede-rear-black.html

RPM Revolver Wheels - E-Rustler/E-Stampede Rear Black Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! Their Revolvers for 1/10th scale trucks are scaled up versions of the Revolvers for 1/18th scale trucks. These larger versions have the same great looks, ultra-lightweight, and rugged durability of their little brothers but fit many of the most popular 1/10th scale trucks available today. Features include a 10-hole pattern blended perfectly with a sweeping dished face while the front edge features 30 faux rivets and a simulated 5 lug bolt pattern for a more authentic, scale appearance. Concours-winning looks are a trip to your local hobby shop away!

Price: $7.95 Special Price: $5.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Revolver Wheels Black Slash 4x4,Blitz]]> http://www.hobbypeople.net/index.php/rpm-black-revolver-wheels.html

RPM R/C Revolver SCT Wheels (Black)

for Traxxas Slash, Slash 4x4 & HPI Blitz

This is a pair of RPM R/C Revolver SCT Wheels (Black). The most popular RPM wheel, the Revolver, is now available in a Short Course version (2.2” - 3.0”). RPM Revolver Short Course wheels are built tough, like all RPM products, look incredible and have an all-new drive system that is built to withstand some serious power.

The RPM “Spline Drive” system is radically different than the standard hex drive. A hex is easy to machine and easy to manufacture, which is why it is so commonly used. However, splines are tougher and stronger, which is why they’re used in full-sized driveline components. All standard hex style adapters push out and up every time rotational force is applied to the adapter, which is a huge reason why so many hex-style adapters spin. RPM Spline Drives direct the rotational force of the axle in a near perpendicular direction, making the likelihood of a spun adapter virtually non-existent! Additionally, our Spline Drive has almost twice the amount of drive surface area versus a standard 12mm hex adapter and over 2.5 times the thickness at the most critical drive point of the adapter, the point that, if it fails, a standard hex adapter will spin.

RPM Revolver Short Course wheels are sold in pairs (spline drive adapters are included in each package), and backed by our industry-leading breakage warranty for unsurpassed strength and durability.

Features:

• Short Course Version of Famous RPM Revolver Wheel

• Built Tough and Look Incredible

• Spline Drive Mounting System (Spline Adapters Included)

Fits:

• Traxxas Slash (Rear) and Slash 4x4 (Front or Rear)

• HPI Blitz (Front or Rear)

• Kyosho Ultima SC (Front or Rear)

• Jammin SCRT (Front or Rear)

• OFNA Hyper 10SC (Front or Rear)

Price: $8.95 Special Price: $6.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Revolver Wheels,Traxxas Slash 2WD Front Black]]> http://www.hobbypeople.net/index.php/rpm-black-revolver-wheels-traxxas-slash-2wd-front.html

RPM R/C Revolver SCT Wheels (Black)

for Traxxas Slash (Front) & Nitro Slash (Front)

This is a pair of RPM R/C Revolver SCT Wheels (Black) for the Traxxas Slash (Front) & Nitro Slash (Front). The most popular RPM wheel, the Revolver, is now available in a Short Course version (2.2” - 3.0”). RPM Revolver Short Course wheels are built tough, like all RPM products, look incredible and have an all-new drive system that is built to withstand some serious power.

The RPM “Spline Drive” system is radically different than the standard hex drive. A hex is easy to machine and easy to manufacture, which is why it is so commonly used. However, splines are tougher and stronger, which is why they’re used in full-sized driveline components. All standard hex style adapters push out and up every time rotational force is applied to the adapter, which is a huge reason why so many hex-style adapters spin. RPM Spline Drives direct the rotational force of the axle in a near perpendicular direction, making the likelihood of a spun adapter virtually non-existent! Additionally, our Spline Drive has almost twice the amount of drive surface area versus a standard 12mm hex adapter and over 2.5 times the thickness at the most critical drive point of the adapter, the point that, if it fails, a standard hex adapter will spin.

RPM Revolver Short Course wheels are sold in pairs (spline drive adapters are included in each package), and backed by our industry-leading breakage warranty for unsurpassed strength and durability.

Features:

• Short Course Version of Famous RPM Revolver Wheel

• Built Tough and Look Incredible

• Spline Drive Mounting System (Spline Adapters Included)

Fits:

• Traxxas Slash (Front)

• Traxxas Nitro Slash (Front)

Price: $8.95 Special Price: $6.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Rod Ends - Traxxas 1/10 Long Black]]> http://www.hobbypeople.net/index.php/rpm-rod-ends-traxxas-1-10-long-black.html

RPM Rod Ends Long (Black)

for Traxxas 1/10th Scale Vehicles

This is a set of RPM Rod EndsLong (Black) for Traxxas 1/10th Scale Vehicles. These rod ends are tough! The area around the ball stud is thicker than the stock rod end while still allowing a full range of motion of the pivot ball. Additionally, the shank has been redesigned with a pair of flats, making the rod end much easier to work with (versus the stock, round shank). RPM rod ends are sold in sets of twelve to complete most vehicle needs.

RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash, Slash 4x4, Summit, T-Maxx, E-Maxx, Revo, E-Revo, Slayer Pro 4x4, Stampede 4x4, Rustler VXL, Jato and Bandit VXL.

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Rod Ends - Traxxas 1/10 Long Blue]]> http://www.hobbypeople.net/index.php/rpm-rod-ends-traxxas-1-10-long-blue.html

RPM Rod Ends Long (Blue)

for Traxxas 1/10th Scale Vehicles

This is a set of RPM Rod EndsLong (Blue) for Traxxas 1/10th Scale Vehicles. These rod ends are tough! The area around the ball stud is thicker than the stock rod end while still allowing a full range of motion of the pivot ball. Additionally, the shank has been redesigned with a pair of flats, making the rod end much easier to work with (versus the stock, round shank). RPM rod ends are sold in sets of twelve to complete most vehicle needs.

RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash, Slash 4x4, Summit, T-Maxx, E-Maxx, Revo, E-Revo, Slayer Pro 4x4, Stampede 4x4, Rustler VXL, Jato and Bandit VXL.

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Rod Ends - Traxxas 1/10 Short Black]]> http://www.hobbypeople.net/index.php/rpm-rod-ends-traxxas-1-10-short-black.html

RPM Rod Ends Short (Black)

for Traxxas 1/10th Scale Vehicles

This is a set of RPM Rod Ends Short (Black) for Traxxas 1/10th Scale Vehicles. These rod ends are tough! The area around the ball stud is thicker than the stock rod end while still allowing a full range of motion of the pivot ball. Additionally, the shank has been redesigned with a pair of flats, making the rod end much easier to work with (versus the stock, round shank). RPM rod ends are sold in sets of twelve to complete most vehicle needs.

RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash, Slash 4x4, Summit, T-Maxx, E-Maxx, Revo, E-Revo, Slayer Pro 4x4, Stampede 4x4, Rustler VXL, Jato and Bandit VXL.

Price: $8.95 Special Price: $6.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Rod Ends - Traxxas 1/10 Short Blue]]> http://www.hobbypeople.net/index.php/rpm-rod-ends-traxxas-1-10-short-blue.html

RPM Rod Ends - Short (Blue)

for Traxxas 1/10th Scale Vehicles

This is a set of RPM Rod Ends - Short (Blue) for Traxxas 1/10th Scale Vehicles. These rod ends are tough! The area around the ball stud is thicker than the stock rod end while still allowing a full range of motion of the pivot ball. Additionally, the shank has been redesigned with a pair of flats, making the rod end much easier to work with (versus the stock, round shank). RPM rod ends are sold in sets of twelve to complete most vehicle needs.

RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all versions of the following: Slash, Slash 4x4, Summit, T-Maxx, E-Maxx, Revo, E-Revo, Slayer Pro 4x4, Stampede 4x4, Rustler VXL, Jato and Bandit VXL.

Price: $8.95 Special Price: $6.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Shock Shaft Guards - Most Assoc 1/10 Blue]]> http://www.hobbypeople.net/index.php/rpm-shock-shaft-guards-most-assoc-1-10-blue.html

RPM R/C Shock Shaft Guards (Blue)

for Most Associated 1/10th Scale Shocks

This is a set of RPM R/C Shock Shaft Guards (Blue) for Most Associated 1/10th Scale Shocks. RPM Shock Shaft Guards for Associated 1/10th scale shocks are a simple design, replacing your stock shock spring cup with one that has a thin but tough shield rising up to the base of the shock body, completely blocking debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well. The kit comes with replacement oversized shock rod ends, improving durability and consistency on the shock pivot ball. Additionally, we redesigned the top of the rod end so it is square. That square end keys the shock shaft guard for directional control. The front shield of the guard covers over 100 degrees of frontal exposure! RPM Shock Shaft Guards are zero friction protection devices, meaning the guard never touches the working elements of the shock.

RPM Shock Shaft Guards are sold in sets of four, including four rod ends for the shocks. Nothing more is needed for installation. A short list of vehicles these guards work with include: SC10, T4, B4, GT2 and most older versions of these vehicles such as the T3, B3, T2, B2, RC10T and RC10. RPM Shock Shaft Guards are stock replacement items.

Features:

• For Use on Most Team Associated 1/10th Scale Shocks

• Blocks Debris From Striking the Shock Shaft

• Prevents Debris From Building Up Inside the Shock Guard

• Oversized Shock Rod Ends Improve Durabilty

*Shown installed on shock for advertising purposes only. Shocks not included!

Price: $11.95 Special Price: $8.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Shock Shaft Guards - Traxxas 1/10 Shocks Black (4)]]> http://www.hobbypeople.net/index.php/rpm-shock-shaft-guards-traxxas-1-10-shocks-black-4.html

Rocks, dirt and debris striking shock shafts lead to dents, dings and burrs, which in turn, leads to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock Shaft Guards shield the shock shaft from those deteriorating elements, prolonging the life of the shock shaft, which improves the long-term performance of the suspension and in turn, prolongs the time between shock rebuilds!

RPM Shock Shaft Guards are a simple design, replacing your stock shock spring cup with one that has a thin but tough shield rising up to the base of the shock body, completely blocking debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well. The kit comes with replacement oversized shock rod ends, improving durability and consistency on the shock pivot ball. Additionally, RPM redesigned the top of the rod end so it is square. That square end keys the shock shaft guard for directional control. The front shield of the guard covers over 100 degrees of frontal exposure! RPM Shock Shaft Guards are zero friction protection devices, meaning the guard never touches the working elements of the shock.

RPM Shock Shaft Guards are sold in sets of four, including four rod ends for the shocks and are stock replacement items. Nothing more is needed for installation. Check out this Dyeable White Shock Shaft Guards - Side Viewpartial list of vehicles they will fit: Slash 2wd, Slash 4x4, Stampede 4x4, nitro and electric versions of the Stampede 2wd and Rustler, Bandit, Nitro Sport, T-Maxx & E-Maxx (see tech notes below), and many more including vintage and legacy models.

*Tech Notes: RPM Shock Shaft Guards fit all Traxxas 1/10th scale molded shocks as well as Traxxas Big Bore shocks but will not fit the Traxxas Jato. They fit the T-Maxx and E-Maxx but will not work with RPM T/E-Maxx A-arms due to clearance limitations on the upper arm.

Price: $11.95 Special Price: $8.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Shock Shaft Guards - Traxxas 1/10 Shocks Blue (4)]]> http://www.hobbypeople.net/index.php/rpm-shock-shaft-guards-traxxas-1-10-shocks-blue-4.html

Rocks, dirt and debris striking shock shafts lead to dents, dings and burrs, which in turn, leads to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock Shaft Guards shield the shock shaft from those deteriorating elements, prolonging the life of the shock shaft, which improves the long-term performance of the suspension and in turn, prolongs the time between shock rebuilds!

RPM Shock Shaft Guards are a simple design, replacing your stock shock spring cup with one that has a thin but tough shield rising up to the base of the shock body, completely blocking debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well. The kit comes with replacement oversized shock rod ends, improving durability and consistency on the shock pivot ball. Additionally, RPM redesigned the top of the rod end so it is square. That square end keys the shock shaft guard for directional control. The front shield of the guard covers over 100 degrees of frontal exposure! RPM Shock Shaft Guards are zero friction protection devices, meaning the guard never touches the working elements of the shock.

RPM Shock Shaft Guards are sold in sets of four, including four rod ends for the shocks and are stock replacement items. Nothing more is needed for installation. Check out this Dyeable White Shock Shaft Guards - Side Viewpartial list of vehicles they will fit: Slash 2wd, Slash 4x4, Stampede 4x4, nitro and electric versions of the Stampede 2wd and Rustler, Bandit, Nitro Sport, T-Maxx & E-Maxx (see tech notes below), and many more including vintage and legacy models.

*Tech Notes: RPM Shock Shaft Guards fit all Traxxas 1/10th scale molded shocks as well as Traxxas Big Bore shocks but will not fit the Traxxas Jato. They fit the T-Maxx and E-Maxx but will not work with RPM T/E-Maxx A-arms due to clearance limitations on the upper arm.

Price: $11.95 Special Price: $8.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Shock Tower - E-Stampede/Rustler/Slash Front]]> http://www.hobbypeople.net/index.php/rpm-shock-tower-e-stampde-rustler-slash-front.html 719052 Shock Tower - E-Stampde/Rustler/Slash Front RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great vehicles. RPM shock towers maintain all stock geometry while adding much needed structural strength to this vital suspension component. Their design uses an I-beam structure that adds tremendous levels of strength and rigidity that is far superior to u-shaped or flat designs. Their front shock towers will not flex nearly as easily as the stock versions yet have enough give in them, which prevents breakage from hard impacts or crashes.

Price: $7.95 Special Price: $5.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Shock Tower - SC10/T4 Rear]]> http://www.hobbypeople.net/index.php/rpm-shock-tower-sc10-t4-rear.html

RPM Rear Shock Tower for Associated SC10 and T4

This is an RPM Rear Shock Tower for Associated SC10 and T4 vehicles. RPM Shock Towers for the SC10 and T4 are designed to improve the structure and durability of these awesome racing trucks. The I-beam shape found along the tops and sides of our shock tower provide some serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability. The end result – a new shock tower design that will rigidly support the rear shocks while allowing the part to survive under extreme crash situations.

Additionally, the unique nature of our materials will help reduce transferred impact energy into the fragile chassis and chassis components. By absorbing that impact energy instead of transferring it on, our shock tower will improve overall crash survivability of the truck. All this and not one gram is added to the weight of the vehicle. Our rear shock tower weighs exactly the same as the original stock part!

Features and Specifications:

• Replaces Stock Rear Shock Tower on Associated SC10 and T4

• Improved Strength and Durability Over Original Stock Part

• Helps Reduce Damage to Other Vital Components

• Weighs the Same as the Original Stock Part

Price: $10.89 Special Price: $8.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Shock Tower - SC10/T4/T4.1/GT2 Front]]> http://www.hobbypeople.net/index.php/rpm-shock-tower-sc10-t4-t4-1-gt2-front.html

RPM Front Shock Tower for Associated SC10, T4, T4.1 and GT2

This is an RPM Front Shock Tower for Associated SC10, T4, T4.1 and GT2 vehicles. When we designed our Front Shock Tower for the SC10, T4, T4.1 and GT2, we had several goals in mind: Improve the strength and durability, improve crash survivability and help reduce damage to other vital components. The results are everything we had hoped they’d be!

The T-shaped structure of our front shock tower provides some serious strength and rigidity while the top-secret blend of materials we use provides unmatched durability.

Although the SC10, T4, T4.1 and GT2 each have different requirements of the front shock tower, the RPM version integrates all those needs for unmatched support of the shocks on all three trucks while the redesigned front bumper mount base for the SC10 has been strengthened to sustain repeated impacts from the stock front bumper. All this performance and durability is wrapped up in a part that weighs slightly less than the stock piece it replaces!

Features and Specifications:

• Replaces Stock Front Shock Tower on Associated SC10, T4, T4.1 and GT2

• Improved Strength and Durability Over Original Stock Part

• Helps Reduce Damage to Other Vital Components

• Unmatched Shock Support for All Three Trucks

• Weighs Less Than Original Stock Part

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Shock Tower - SC10B/SC10.2 Front]]> http://www.hobbypeople.net/index.php/rpm-shock-tower-front-sc10b-sc10-2.html

RPM Front Shock Tower

for Team Associated SC10B, SC10.2 & T4.2FT

This is an RPM Front Shock Tower for Team Associated SC10B, SC10.2 & T4.2FT. The RPM Front Shock Tower for the SC10B, SC10.2 & T4.2FT is designed with one goal in mind - crash survivability. Every design alteration we made was dedicated towards that goal and what we accomplished far surpassed even our expectations. The end result - a front shock tower that can handle virtually everything thrown at it!

At the heart of our design lies a ribbed structure surrounding the vital areas that needed support. This rib, combined with our top-secret blend of indestructible nylons, helps maintain the strength this shock tower needs to survive. We’ve also redesigned the cross ribs that support the front bumper and body mount. With the added support we’ve engineered in, frontal impacts that would destroy stock parts will no longer finish your day. Whether bashing, cruising or racing, our front shock tower for these awesome machines will get you to the finish line. RPM Front Shock Towers are protected by our industry-leading warranty against breakage and are designed and manufactured in the USA.

Features:

• Ribbed Structure Molded From High-Strength Nylon is Extremely Durable

• Redesigned Cross Ribs Support the Front Bumper and Body Mount

• Industry Leading Warranty Against Breakage

• Designed and Manufactured in the USA

Fits:

• Team Associated SC10B

• Team Associated SC10.2

• Team Associated T4.2FT

Price: $9.95 Special Price: $7.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Shock Tower - Slash 4x4 Front,Stampede 4x4]]> http://www.hobbypeople.net/index.php/rpm-shock-tower-slash-4x4-front.html

RPM is proud to introduce their front and rear shock towers for the Traxxas Slash 4x4. These shock towers are designed to take some serious abuse without failing because nothing is worse than having a part break when you’re out having a fun day, whether it’s at the local track or at your favorite place to bash.

Structurally, RPM shock towers for the Slash 4x4 are about as strong as they can be, keeping your suspension moving freely without added flex. However, under extreme crash situations, the nature of RPM's proprietary materials allows it to give slightly, absorbing that impact energy to prevent damage to the shock tower and reduce the amount of transferred shock energy to the more fragile differential cases. Their material then returns back to its original shape almost instantly. No other material can do that!

Additionally, RPM shock towers retain the large dust cover ribs that overlap the tops of the differential case, providing an extra layer of protection against dirt and grit not found on many aftermarket shock towers.

Price: $10.89 Special Price: $8.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Shock Tower - Slash 4x4 Rear,Stampede 4x4]]> http://www.hobbypeople.net/index.php/rpm-shock-tower-slash-4x4-rear.html

RPM is proud to introduce their front and rear shock towers for the Traxxas Slash 4x4. These shock towers are designed to take some serious abuse without failing because nothing is worse than having a part break when you’re out having a fun day, whether it’s at the local track or at your favorite place to bash.

Structurally, RPM shock towers for the Slash 4x4 are about as strong as they can be, keeping your suspension moving freely without added flex. However, under extreme crash situations, the nature of RPM's proprietary materials allows it to give slightly, absorbing that impact energy to prevent damage to the shock tower and reduce the amount of transferred shock energy to the more fragile differential cases. Their material then returns back to its original shape almost instantly. No other material can do that!

Additionally, RPM shock towers retain the large dust cover ribs that overlap the tops of the differential case, providing an extra layer of protection against dirt and grit not found on many aftermarket shock towers.

Price: $10.89 Special Price: $8.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Shock Tower - Slash/E-Stmpd/E-Rstlr/Bndt Rear]]> http://www.hobbypeople.net/index.php/rpm-shock-tower-slash-e-stmpd-e-rstlr-bndt-rear.html

Rear Shock Tower - Slash/E-Stampede/E-Rustler/Bandit

RPM rear shock towers for the electric versions of the Slash, Stampede, Rustler & Bandit were designed with one thing in mind – rugged durability. Once again, RPM has exceeded their own expectations with this shock tower. While they maintained all stock geometry on these shock towers, they beefed them up in all the right places to eliminate annoying rear shock tower breakage. RPM's version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, they improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Rustler & Stampede.

*Tech Note: These rear shock towers can be used on the Traxxas Bandit. However, there are no provisions for a rear wing built into these shock towers.

Price: $8.95 Special Price: $6.71

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Shock Tower Black w/Mounts - Maxxs]]> http://www.hobbypeople.net/index.php/rpm-shock-tower-black-w-mounts-maxxs.html

RPM Shock Tower Black w/Mounts - Maxxs

Shock Tower T/E-Maxx, Blk, w Mounts

Each package includes one shock tower (which can be used in either the front or rear location on the truck), two body posts, one front cross brace, one rear cross brace, four 4-40 screws, four jam nuts, and complete installation instructions. Two packages are needed to complete one vehicle.

Price: $16.89 Special Price: $12.67

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Skid Plate - Slash Front Black]]> http://www.hobbypeople.net/index.php/rpm-skid-plate-slash-front-black.html RPM Skid Plate - Slash Front Black The RPM front skid plate features a new bell crank mounting system that eliminates the need to remove the bell crank every time the front skid plate is removed. RPM accomplished this by using a pair of posts that press into the chassis of the truck and another pair of posts molded into the skid plate. This sandwiches the bell crank between the skid plate and chassis and supports both the upper and lower portions of the bell crank, reducing steering slop and giving a more precise feel to the steering system. This system simplifies maintenance and eliminates the annoying problem of the bell crank screws popping out of the chassis support holes after an impact to the front end.

Tech Notes: RPM skid plates are designed for and only guaranteed to fit a stock Traxxas Slash chassis and chassis components. RPM's front skid plate also uses a triangulated chassis mounting system that uses a support post in the center of the skid plate to bolt up to a pre-existing hole in the stock Traxxas chassis. This third hole not only adds some serious strength and durability, it adds some much needed structural support to the bell cranks.

As a final touch, RPM recessed the screw heads of the front two flat head mounting screws deeper than the stock skid plates to help reduce damage to the screw heads.

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Skid Plate - Slash Front Blue]]> http://www.hobbypeople.net/index.php/rpm-skid-plate-slash-front-blue.html

 

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Skid Plate - Slash Rear Black]]> http://www.hobbypeople.net/index.php/rpm-skid-plate-slash-rear-black.html RPM Skid Plate - Slash Rear Black RPM rear skid plates for the Traxxas Slash are designed to eliminate the frustration of broken skid plates and chassis. When a stock rear skid plate fails, it can rip the rear shock tower mounting screws out of the chassis, causing a catastrophic failure usually resulting in the rear end sailing in a different direction than the rest of the truck. With RPM skid plates mounted, that problem will be a thing of the past!

Tech Notes: Stock rear bumper mounts (Traxxas #3677) will not work with RPM skid plates. To retain the use of a rear bumper or wheelie bar, RPM #80902 or #80905 must be used. RPM skid plates are designed for and only guaranteed to fit a stock Traxxas Slash chassis and chassis components. RPM rear Slash skid plates are completely redesigned, making them stronger and much more durable. Their unique design uses three chassis mounting points instead of two, triangulating the chassis mounts on the truck, in turn spreading impact energy over a larger area. This is done using a hole already located in the stock chassis, meaning no drilling is required. Also eliminated is the cross-tube styling of the stock skid plates in favor of a solid flat skid design with a large radius at the transition points to allow the truck to slide over obstacles that would have normally caught on the stock rear skid plate. That means no more direct impacts to the lower rear end of the truck, which is the primary source of a broken chassis.

As a final design touch, RPM added four thick skid rails on both the front and rear skid plates which reduce sliding friction while improving the overall durability of the skid plates and the truck. At the tail end of the rear skid plate, a skid rail runs from side to side to protect the lower transmission screw and rear bumper mount while providing a smooth transitional surface.

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Skid Plate - Slash Rear Blue]]> http://www.hobbypeople.net/index.php/rpm-skid-plate-slash-rear-blue.html RPM Skid Plate - Slash Rear Blue RPM rear skid plates for the Traxxas Slash are designed to eliminate the frustration of broken skid plates and chassis. When a stock rear skid plate fails, it can rip the rear shock tower mounting screws out of the chassis, causing a catastrophic failure usually resulting in the rear end sailing in a different direction than the rest of the truck. With RPM skid plates mounted, that problem will be a thing of the past!

Tech Notes: Stock rear bumper mounts (Traxxas #3677) will not work with RPM skid plates. To retain the use of a rear bumper or wheelie bar, RPM #80902 or #80905 must be used. RPM skid plates are designed for and only guaranteed to fit a stock Traxxas Slash chassis and chassis components. RPM rear Slash skid plates are completely redesigned, making them stronger and much more durable. Their unique design uses three chassis mounting points instead of two, triangulating the chassis mounts on the truck, in turn spreading impact energy over a larger area. This is done using a hole already located in the stock chassis, meaning no drilling is required. Also eliminated is the cross-tube styling of the stock skid plates in favor of a solid flat skid design with a large radius at the transition points to allow the truck to slide over obstacles that would have normally caught on the stock rear skid plate. That means no more direct impacts to the lower rear end of the truck, which is the primary source of a broken chassis.

As a final design touch, RPM added four thick skid rails on both the front and rear skid plates which reduce sliding friction while improving the overall durability of the skid plates and the truck. At the tail end of the rear skid plate, a skid rail runs from side to side to protect the lower transmission screw and rear bumper mount while providing a smooth transitional surface.

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Skid Plate - Slash Rear Gray]]> http://www.hobbypeople.net/index.php/rpm-skid-plate-slash-rear-gray.html

 

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Skid Plate - T-Maxx 4908 & E-Maxx 3905 Black]]> http://www.hobbypeople.net/index.php/rpm-skid-plate-t-maxx-4908-and-e-maxx-3905-black.html

RPM Skid Plate - T-Maxx 4908 & E-Maxx 3905 Black The extended chassis rails of the newer versions of both the T-Maxx and E-Maxx would not allow RPM's original center skid plate to bolt up to either of these trucks without modification to the chassis rails. After quite a bit of prodding from the customers, RPM now has a center skid plate and skid plate set designed specifically for the T-Maxx #4908 & E-Maxx #3905 trucks.

Unlike the stock center skid plate, the new molded center skid plate extends over the predominance of the chassis rails with better than 4mm of bulletproof RPM protection! The molded curves of the skid plate perfectly mate with the chassis support rails and act as a reduced-friction transition surface that prevents objects from hooking the stock rear skid plate. Other great features include: deep recessed screw holes help eliminate damage to the mounting screw heads, a matched grooved finish from the front of the truck to the rear and provide outstanding wear and impact resistance. The center skid plate provides a more solid tie between the two chassis side rails for added support and rigidity. Additionally, since the center skid plate runs the rearward length of the chassis side rails, less dirt and debris will be forced into the rear skid plate area of the chassis, improving driveline durability and drive shaft bearing longevity.

Price: $21.89 Special Price: $16.42

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Skid Plate Rear - Losi Ten-SCTE, Ten-T & 810]]> http://www.hobbypeople.net/index.php/rpm-rear-skid-plate-ten-scte-ten-t-810.html

RPM Rear Skid Plate

for Losi TEN-SCTE, TEN-T and 810

This is an RPM Rear Skid Plate for the Losi TEN-SCTE, TEN-T and 810. Protection is the key to survivability. Sadly, the aluminum chassis plate of the Losi TEN-SCTE, TEN-T and 810 is completely unprotected against scrapes, scratches and impacts at either end of the truck. Our recent release of our Front Bumper & Skid Plate takes care of the front of the chassis (on the TEN-SCTE) while our Rear Skid Plate was designed to take care of protecting the back.

The RPM Rear Skid Plate for the Losi TEN-SCTE, TEN-T & 810 is simple, yet cleverly designed with a sharp leading edge that transitions seamlessly through a large front radius and into a 5/32" thick skid/wear plate. The large front radius prevents objects from catching the front lip of the skid plate, allowing smooth transitions up and over anything sliding against the bottom of the vehicle. RPM nylons are integral to the design, providing unmatched abrasion and skid resistance for longevity and durability.

Don’t rely on a bare aluminum chassis as your rear skid plate. RPM is in the business to protect your ride so bolt us on and never look back!

Features:

• Protects Rear Aluminum Skid Plate From Scrapes, Scratches and Impacts

• Sharp Leading Edge Transitions Seamlessly Through a Large Front Radius

• Large Front Radius Prevent Objects From Catching the Front Lip of the Skid Plate

• Nylon Construction Provides Unmatched Abrasion and Skid Resistance for Longevity and Durability

Fits:

• Losi TEN-SCTE, TEN-T and 810

Price: $7.95 Special Price: $5.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Spline Drive Adapter - Slash 2WD/4x4/HPI Blitz]]> http://www.hobbypeople.net/index.php/rpm-replacement-spline-drive-adadpter-slash-2wd-4x4andhpi-blit.html

RPM R/C Replacement Spline Drive Adapters (6)

This is a set of 6 RPM R/C Replacement Spline Drive Adapters. The RPM “Spline Drive” system is radically different than the standard hex drive. A hex is easy to machine and easy to manufacture, which is why it is so commonly used. However, splines are tougher and stronger, which is why they’re used in full-sized driveline components. All standard hex style adapters push out and up every time rotational force is applied to the adapter, which is a huge reason why so many hex-style adapters spin. RPM Spline Drives direct the rotational force of the axle in a near perpendicular direction, making the likelihood of a spun adapter virtually non- existent! Additionally, our Spline Drive has almost twice the amount of drive surface area versus a standard 12mm hex adapter and over 2.5 times the thickness at the most critical drive point of the adapter, the point that, if it fails, a standard hex adapter will spin.

Features:

• Tougher and Stronger Than Standard Hex Adapters

• Won't Spin Under Load

• Replaces Stock Hex Adapters

• For Use Only with Wheels Made for Spline Drive Adapters

Price: $5.95 Special Price: $4.46

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Spring Cups - Traxxas Shocks (Most) Lower Black]]> http://www.hobbypeople.net/index.php/rpm-spring-cups-traxxas-shocks-most-lower-black.html

708313 Spring Cups - Traxxas Shocks (Most) Lower Black RPM RC's spring cups hold the base of the shock spring in place better than the stock parts and, because of their killer material, also tend to stay cleaner. In addition, coupled with the above mentioned spring clips, anyone can add a whole new dimension of color to their Savage or Savage-X! Nothing looks better than a complete suspension set-up dressed up with RPM colors!

Tech Note: RPM Lower Spring Cups are sold in sets of four parts per package. Two packages will be needed to complete one complete Savage with eight shocks.

Price: $2.95 Special Price: $2.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - 1/16 E-Revo Front Up & Lwr Black]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-1-16-e-revo-front-up-and-lwr-black.html RPM Suspension Arms - 1/16 E-Revo Front Up & Lwr Black Upon the release of the Traxxas 1/16th Scale Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With their guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived!

Another problem RPM has been able to eliminate was slop in the suspension system. In some cases, they found as much as 1/32 of slop in the stock A-arms! That has been remedied with these new RPM versions. RPM's A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving.

Price: $14.89 Special Price: $11.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - 1/16 E-Revo Front Up & Lwr Blue]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-1-16-e-revo-front-up-and-lwr-blue.html RPM Suspension Arms - 1/16 E-Revo Front Up & Lwr Blue Upon the release of the Traxxas 1/16th Scale Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With their guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived!

Another problem RPM has been able to eliminate was slop in the suspension system. In some cases, they found as much as 1/32 of slop in the stock A-arms! That has been remedied with these new RPM versions. RPM's A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving.

Price: $14.89 Special Price: $11.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - 1/16 E-Revo Rear U&L Black (4 pcs)]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-1-16-e-revo-rear-uandl-black-4-pcs.html RPM Suspension Arms - 1/16 E-Revo Rear U&L Black (4 pcs) Similar to RPM front A-arms (#80692 & #80695), their rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent suspension system with a significantly reduced tendency for the truck to randomly wander while driving.

RPM rear suspension arms match the same design elements as their fronts using angled leading and trailing edges. By incorporating a 30-degree bevel in these areas, RPM arms reduce the chance of breaking suspension parts since the A-arms will naturally try to transition over objects instead of bluntly plowing into them.

Price: $14.89 Special Price: $11.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - 1/16 E-Revo Rear U&L Blue (4 pcs)]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-1-16-e-revo-rear-uandl-blue-4-pcs.html RPM Suspension Arms - 1/16 E-Revo Rear U&L Blue (4 pcs) Similar to RPM front A-arms (#80692 & #80695), their rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent suspension system with a significantly reduced tendency for the truck to randomly wander while driving.

RPM rear suspension arms match the same design elements as their fronts using angled leading and trailing edges. By incorporating a 30-degree bevel in these areas, RPM arms reduce the chance of breaking suspension parts since the A-arms will naturally try to transition over objects instead of bluntly plowing into them.

Price: $14.89 Special Price: $11.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - 1/16 Slash Front Black]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-1-16-slash-front-black.html

RPM Front 1:16 Slash 4x4 A-Arms

This is a pair of RPM Front 1:16 Slash 4x4 A-Arms and is intended for use with the Traxxas 1:16 Scale Slash 4x4, F-150 Raptor SVT, Ford Fiesta, Ken Block Gymkhana, Ford Mustang Boss 302, Kyle Busch Race Replica & Rally VXL vehicles.

These RPM A-Arms eliminate nearly all of the slop in the suspension arms, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: a smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving.

Unique to RPM suspension arms is the angled leading and trailing edges. RPM has incorporated a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-Arm will naturally try to transition over objects instead of bluntly plowing into them. The arms are sold in sets of four – including both upper and both lower A-Arms. Plus, like all RPM molded products, are backed by RPM's industry-leading breakage warranty for worry-free operation.

Features and Specifications:

• Designed for Traxxas Slash 4x4 1:16 Scale Vehicles

• Extremely Durable Design and Materials

• Nearly Eliminates All A-Arm Slop

• 30-Degree Beveled Leading and Trailing Edges Reduces the Chance of Damage

• Includes One Pair of Front A-Arms Molded in Black

 

Price: $14.95 Special Price: $11.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - 1/16 TRX Black Rear]]> http://www.hobbypeople.net/index.php/rpm-1-16-black-rear-a-arms.html

RPM Suspension Arms - 1/16 TRX Black Rear

Following the successful launch of RPM front A-arms, RPM rear A-arms for the 1/16th Slash 4x4 chassis (see tech notes below) are here. RPM rear A-arms follow all of the same indestructible characteristics RPm fans have come to expect from RPM parts. Their rear A-arms eliminate nearly all of the A-arm slop found in stock components, which allows camber, caster and toe angle settings to be more firmly fixed in position. The result: A smoother, more consistent suspension system with a significantly reduced tendency for the vehicle to randomly wander while driving.

Unique to RPM suspension arms is the angled leading and trailing edges. RPM incorporated a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them.

RPM rear A-arms for the Traxxas 1/16th scale Slash 4x4 are sold in sets of four – including both upper and both lower a-arms.

Tech Notes: These RPM A-arms fit all of the following Traxxas 1/16th scale models: Slash 4x4, Ford Fiesta, Ken Block Gymkhana, Ford Mustang Boss 302, Kyle Busch Race Replica & Rally VXL.

Price: $14.95 Special Price: $11.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - Baja 5B,5T Front Up & Lwr Black]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-baja-5b-5t-front-up-and-lwr-black.html

RPM Suspension Arms - Baja 5B,5T Front Up & Lwr Black RPM front A-arms for the HPI Baja 5B & 5T are designed around the stock A-arm geometry, which means they are direct fit replacements no additional parts or accessories are needed. The list of improvements from there is extensive! To start, RPM eliminated most of the hard rib angles in favor of smoothly contoured curves that enhance survivability during extreme impacts. Both the upper and lower A-arms incorporate much larger and stronger corner webs than the stock A-arms while RPM lower A-arms have a redesigned center brace structure that helps the rigidity and strength considerably by spreading impact energies over a much larger area. RPM A-arms will hold their shape better and have less flex than the stock arms as well!

Tech Notes: RPM A-arms are sold in sets consisting of one upper A-arm, one lower A-arm, one lower a-arm skid plate, two shock spacers and two skid plate mounting screws. Two kits will be needed to complete one vehicle. RPM Replacement Shock Skid Plates work with RPM Baja 5B / 5T front A-arms exclusively and are sold in pairs with necessary mounting hardware. After extensive in-house review of 5B & 5T A-arms in stock form and listening to Baja owners, RPM found that the stock pivot ball socket tends to break out under certain impact conditions. They addressed this problem by adding nearly 15% more material around the diameter of the pivot ball socket and redesigned the shape of the socket to add more support and improve crash survivability without creating any interference with suspension or steering movement. While they were redesigning the pivot ball area, RPM reduced the amount of slop in the ball socket to help improve and maintain more consistent camber and toe angles for smoother, more precise steering.

Another problem with the stock A-arms is the lack of protection for the very low-hanging front shocks. RPM solved that problem in a couple of ways. First, they elongated the lower shock mount, leaving no part of the shock exposed. Next, they incorporated a unique lower A-arm skid plate that completely covers & protects the lower shock mount. This skid plate adds serious bulletproof RPM protection to the lower end of those extremely expensive shocks while adding strength and support to the whole lower A-arm. Additionally, these skid plates are reversible! Since the A-arm is angled up, only the lowest part of the skid plate (the rear area) will see the most wear. By making the skid plates reversible, the 5B / 5T owner can run the skid plates until they wear thin on the one end, swap them from one side to the other and theyre good to go for more punishment!

Price: $26.99 Special Price: $20.24

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - Baja 5B/5T Rear Up & Lwr Black]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-baja-5b-5t-rear-up-and-lwr-black.html RPM Suspension Arms - Baja 5B/5T Rear Up & Lwr Black Two months prior to the release of these rear A-arms for the HPI Baja 5B & 5T, RPM released their version of the front A-arms. In that short amount of time, the durability of the Baja A-arms displayed their unbeatable nature! That kind of performance can now be matched out back with our rear A-arms for the 5B & 5T.

RPM moved the rear hub carrier forward by 1/8 over stock geometry. While this does little to change the overall wheelbase of the vehicle, what it does do is alter the angle of the drive shaft as it exits the differential. This reduces the tendency of the Baja to squat under acceleration. This happens when the torque of the motor is opposed by the force of friction created by traction at the rear tires causing chassis squat, consequently causing a loss of grip. By sliding the rear hub carrier forward, you use the torque of the motor to effectively push the rear wheels into the ground, using both the weight of the Baja and the torque of the motor to improve acceleration performance. Up top, RPM rear upper A-arms have had a shape change for added lateral stability the stock Y shape tends to allow the upper pivot ball to move forward and backward while the RPM D shape holds the upper pivot ball in place more solidly, providing a more consistent feel to the performance of the Baja.

Tech Notes: RPM Rear A-arms for the Baja 5B & 5T are sold in sets consisting of one upper and one lower A-arm. Two sets will be needed to complete one vehicle. RPM Baja rear A-arms start with the basic geometry of the stock arms so they are direct replacement parts no additional parts will be needed. However, RPM made a number of modifications to the arms from there to improve performance and durability. Key durability features are as follows:
  • The shock mount on the lower A-arm has been moved forward by a full to eliminate the severe rubbing issue of the wheel at the shock mount that would cause stock arms to break.
  • By moving the shock mount forward, RPM was able to increase the material around the shock mount to protect the lower shock rod end, preventing it from being the lowest hanging component of the A-arm assembly.
  • RPM incorporated a third inner hinge pin boss at the inside hinge pin of the lower A-arm and tied in structural ribs that help disperse impact energy and rotational forces from engine torque over all three hinge pin bosses.
  • Similar corner webs to those found on RPM's front A-arms have been designed into the rear upper and lower A-arms as well to help improve strength and durability.

Price: $23.99 Special Price: $17.99

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - Bandit Rear Black]]> http://www.hobbypeople.net/index.php/rpm-a-arms-rear-bandit-black.html

RPM Rear A-Arms (Black)

for the Traxxas Bandit

This is a set of RPM Rear A-Arms (Black) for the Traxxas Bandit. RPM Rear A-arms for the Traxxas Bandit are finally here to strengthen the rear end of these already tough 1:10th scale buggies. RPM rear Bandit A-arms incorporate stock suspension geometry, yet are vastly stronger and much more aesthetically pleasing than stock A-arms. Additionally, we’ve beefed up the hinge pin bosses by roughly 20% while reducing hinge pin slop for camber and rear toe settings that don’t move! All this strength and our A-arms are roughly 8% lighter than stock! Each RPM A-arm is designed for durability and factory-backed by our limited lifetime replacement warranty for quality you can feel confident about.

Features:

• Vastly Stronger and More Aesthetically Pleasing the Stock A-Arms

• 20% Larger Hinge Pin Bosses

• Reduced Hinge Pin Slop for Camber and Rear Toe Settings That Don't Move

• A-Arms are Roughly 8% Lighter Than Stock A-Arms

• For Use with Traxxas Bandit

Price: $11.95 Special Price: $8.96

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - Bandit/NRustler/Stampede Front]]> http://www.hobbypeople.net/index.php/rpm-front-a-arms-for-nitro-rustler-stampede-sport-black.html

RPM R/C Front Suspension Arms (Black)

for Traxxas Nitro Stampede, Nitro Rustler, Nitro Sport & Bandit

This is a pair of RPM R/C Front Suspension Arms (Black) for the Traxxas Nitro Stampede, Nitro Rustler, Nitro Sport & Bandit. RPM sets the standard in the R/C industry for durability and all out rugged performance. Our Traxxas Nitro Rustler, Nitro Stampede, Nitro Sport & Bandit Front A-arms are built to stand up against the toughest abuse from the backyard basher all the way to the top-level racers. Our A-arms incorporate all stock geometry, yet have been redesigned for strength, looks, performance and durability. We build these A-arms from our well-known trademark blend of nylons for bulletproof performance and unsurpassed durability. They carry our reputable warranty against breakage as well.

Features:

• Much More Durable and Rugged Than Stock Suspension Arms

• Incorporates All Stock Suspension Geometry

• Molded From RPM R/C's Proprietary Blend of Nylons for Bulletproof Performance and Unsurpassed Durability

Fits:

• Traxxas Nitro Stampede, Nitro Rustler, Nitro Sport & Bandit

*Not compatible with electric versions of the Stampede and Rustler.

Price: $10.95 Special Price: $8.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - Blitz/Firestorm RTR Front]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-blitz-firestorm-rtr-front.html

 

Price: $14.89 Special Price: $11.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - GT2,SC10,T4 Front Blue]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-gt2-sc10-t4-front-blue.html RPM Suspension Arms - GT2,SC10,T4 Front Blue The long-running success of RPM A-arms for the original GT has led to the release of A-arms for the updated gas truck to come from Associated the GT2. RPM GT2 A-arms were designed to solve several customer-related complaints about the stock A-arms. Foremost is durability. RPM's GT2 front and rear A-arms are designed to withstand some serious abuse! Theyve redesigned the entire front end, replacing the stock front bulkhead with a version that helps spread impact forces over a larger area at the inner hinge pin mounts. RPM front A-arms are wider at the inner hinge pin mounts by nearly 3/16 without altering suspension geometry. RPM GT2 rear A-arms are just flat-out beefy!

Price: $14.89 Special Price: $11.17

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - GT2/SC10/T4 Front Black]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-gt2-sc10-t4-front-black.html

708152 Suspension Arms - GT2,SC10,T4 Front Black The long-running success of RPM A-arms for the original GT has led to the release of A-arms for the updated gas truck to come from Associated – the GT2. RPM GT2 A-arms were designed to solve several customer-related complaints about the stock A-arms. Foremost is durability. RPM's GT2 front and rear A-arms are designed to withstand some serious abuse! They’ve redesigned the entire front end, replacing the stock front bulkhead with a version that helps spread impact forces over a larger area at the inner hinge pin mounts. RPM front A-arms are wider at the inner hinge pin mounts by nearly 3/16” without altering suspension geometry. RPM GT2 rear A-arms are just flat-out beefy!

Price: $14.95 Special Price: $11.21

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - Jato Black Front]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-jato-black-front.html RPM Suspension Arms - Jato Black Front

RPM Jato A-arms are designed using stock geometry, making them direct, bolt-in replacement parts. Furthermore, weve reduced the clearances around the hinge pins and A-arm mounting areas to help reduce slop in the suspension system, providing better, more consistent camber, caster, toe, and wheelbase settings. RPM Jato A-arms use stock mounting hardware nothing more to buy. RPM A-arms for the Traxxas Jato are sold in pairs, and are molded in blue or black from our bulletproof blend of top-secret materials for the ultimate combination of strength, durability, & wear-resistance in a lightweight set of A-arms that wont leave your wallet empty!

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - Jato Front Blue]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-jato-front-blue.html

RPM Suspension Arms - Jato Front Blue

RPM front A-arms for the Traxxas Jato are designed as dual-purpose A-arms that can handle the rigors of the backyard basher as well as the hardcore racer. These A-arms have been designed to be more rigid than stock, yet under extreme situations will give slightly to prevent them from breaking. Additionally, the same characteristics that allow RPM A-arms to give under extreme duress also reduce the energy from those impacts from transferring into the more fragile components of the vehicle, which can be harder and more expensive to replace. The rigidity of the new A-arms will please even the most demanding of racers.

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - Jato Rear Black]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-jato-rear-black.html

RPM Suspension Arms - Jato Rear Black

RPM front A-arms for the Traxxas Jato are designed as dual-purpose A-arms that can handle the rigors of the backyard basher as well as the hardcore racer. These A-arms have been designed to be more rigid than stock, yet under extreme situations will give slightly to prevent them from breaking and reduce the energy from those impacts from transferring into the more fragile components of the vehicle, which can be harder and more expensive to replace. The rigidity of the new A-arms will please even the most demanding of racers.

RPM Jato A-arms are designed using stock geometry, making them direct, bolt-in replacement parts. Furthermore, weve reduced the clearances around the hinge pins and A-arm mounting areas to help reduce slop in the suspension system, providing better, more consistent camber, caster, toe, and wheelbase settings. RPM Jato A-arms use stock mounting hardware nothing more to buy. RPM A-arms for the Traxxas Jato are sold in pairs, and are molded in blue or black from our bulletproof blend of top-secret materials for the ultimate combination of strength, durability, & wear-resistance in a lightweight set of A-arms that wont leave your wallet empty! RPM A-arms are the toughest arms you can buy and we back that statement with a lifetime breakage warranty*. RPM A-arms are the last set of arms youll ever need for your Traxxas Jato!

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - Jato Rear Blue]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-jato-rear-blue.html

RPM Suspension Arms - Jato Rear Blue

RPM front A-arms for the Traxxas Jato are designed as dual-purpose A-arms that can handle the rigors of the backyard basher as well as the hardcore racer. These A-arms have been designed to be more rigid than stock, yet under extreme situations will give slightly to prevent them from breaking and reduce the energy from those impacts from transferring into the more fragile components of the vehicle, which can be harder and more expensive to replace. The rigidity of the new A-arms will please even the most demanding of racers.

RPM Jato A-arms are designed using stock geometry, making them direct, bolt-in replacement parts. Furthermore, weve reduced the clearances around the hinge pins and A-arm mounting areas to help reduce slop in the suspension system, providing better, more consistent camber, caster, toe, and wheelbase settings. RPM Jato A-arms use stock mounting hardware nothing more to buy. RPM A-arms for the Traxxas Jato are sold in pairs, and are molded in blue or black from our bulletproof blend of top-secret materials for the ultimate combination of strength, durability, & wear-resistance in a lightweight set of A-arms that wont leave your wallet empty! RPM A-arms are the toughest arms you can buy and we back that statement with a lifetime breakage warranty*. RPM A-arms are the last set of arms youll ever need for your Traxxas Jato!

Price: $11.89 Special Price: $8.92

]]>
Mon, 14 Jul 2014 16:18:23 +0000
<![CDATA[RPM Suspension Arms - REVO Front Left (Black)]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-revo-front-left-black.html RPM Suspension Arms - REVO Front Left (Black)

This is a pair of RPM Black Front Upper and Lower Left A-Arms for the Traxxas Revo.

Features:

  • Constructed of composite nylon
  • Angled leading and trailing edges eliminate dirt build-up
  • No excessive A-arm endplay for more accurate caster and toe angle settings
  • Large shock rod mounting areas for improved rigidity
  • Specifications:
      Upper Lower
    Length: 4.9" (124mm) 5.9" (149mm)
    Width: 2.5" (63mm) 2.8" (72mm)

    Price: $14.89 Special Price: $11.17

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - Revo Front Right (Black)]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-revo-front-right-black.html

    RPM Suspension Arms - Revo Front Right (Black)

    This is a pair of RPM Black Front Upper and Lower Right A-Arms for the Traxxas Revo.

    Features:

    • Constructed of composite nylon
    • Angled leading and trailing edges eliminate dirt build-up
    • No excessive A-arm endplay for more accurate caster and toe angle settings
    • Large shock rod mounting areas for improved rigidity

     

    Specifications:
      Upper Lower
    Length: 4.9" (124mm) 5.9" (149mm)
    Width: 2.5" (63mm) 2.8" (72mm)

    Price: $14.89 Special Price: $11.17

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - REVO Front Right (Blue)]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-revo-front-right-blue.html

    RPM Suspension Arms - REVO Front Right (Blue)

    RPM Blue Front Upper and Lower Right A-Arms for the Traxxas Revo

    This pair of RPM Blue Front Upper and Lower Right A-Arms for the Traxxas Revo is constructed of composite nylon. Angled leading and trailing edges eliminate dirt build up. No excessive A-arm endplay makes for more accurate caster and toe angle settings.

    Price: $14.89 Special Price: $11.17

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - REVO Rear (Black)]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-revo-rear-black.html

    RPM Suspension Arms - REVO Rear (Black)

    This is a pair of RPM Black Rear A-Arms for the Traxxas Revo.

    Features:

    • Constructed of composite nylon
    • Angled leading and trailing edges eliminate dirt build-up
    • Fits left or right side

     

    Specifications:

    • Length: 4.9" (124mm)
    • Width: 2.5" (63mm)

     

    Price: $12.89 Special Price: $9.67

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - REVO Rear (Blue)]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-revo-rear-blue.html RPM Suspension Arms - REVO Rear (Blue)

    RPM Blue Rear A-Arms for the Traxxas Revo

    This pair of RPM Blue Rear A-Arms for the Traxxas Revo is constructed of composite nylon .Angled leading and trailing edges eliminate dirt build-up. Fits either the right of left side.

    Includes one upper and one lower rear a-arm with 16mm screw for shock mount rod. Package contains one pair, therefore two packages are required per car.

    Price: $12.89 Special Price: $9.67

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - Rustler/Stampede Rear Black]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-rustler-stampede-rear-black.html RPM Suspension Arms - Rustler/Stampede Rear Black RPM 's rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, but theyve also managed to eliminate over 7 grams of weight per arm! Thats 14 grams of unsprung weight eliminated with a single pair of rear A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams or almost a full ounce! RPM accomplished this without creating any weak points nor are their A-arms any more flexible than the stock versions. Additionally, they adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While they were at it, RPM eliminated over 0.030 or 1/32 of slop from the inner arm mount and more than 0.010 or slightly less than 1/64 of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system.RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are sold in pairs 1 left rear and 1 right rear per package.

    Tech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.

    Price: $10.89 Special Price: $8.17

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - Rustler/Stampede Rear Blue]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-rustler-stampede-rear-blue.html RPM Suspension Arms - Rustler/Stampede Rear Blue RPM 's rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, but theyve also managed to eliminate over 7 grams of weight per arm! Thats 14 grams of unsprung weight eliminated with a single pair of rear A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams or almost a full ounce! RPM accomplished this without creating any weak points nor are their A-arms any more flexible than the stock versions. Additionally, they adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While they were at it, RPM eliminated over 0.030 or 1/32 of slop from the inner arm mount and more than 0.010 or slightly less than 1/64 of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system.RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are sold in pairs 1 left rear and 1 right rear per package.

    Tech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.

    Price: $10.95 Special Price: $8.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - Rustler/Stampede/Slash Elec Frt Blk]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-rustler-stampede-slash-elec-frt-blk.html RPM Suspension Arms - Rustler/Stampede/Slash Elec Frt Blk RPM front A-arms for the electric versions of the Traxxas Rustler, Stampede and Slash are built to withstand some of the toughest abuse. Incredibly, RPM was able to shave some unwanted unsprung weight as well. RPM's Front A-arms are nearly 25% lighter than stock versions of the same A-arms. Additionally, they increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM #80372 & #80382). RPM front A-arms for the Electric versions of the Traxxas Rustler, Stampede and Slash are sold in pairs. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arms ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for superior ride and stability over the roughest tracks and terrain.

    Tech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.

    Price: $10.95 Special Price: $8.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - Rustler/Stampede/Slash Elect Fr Blue]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-rustler-stampede-slash-elect-fr-blue.html RPM Suspension Arms - Rustler/Stampede/Slash Elect Fr Blue RPM front suspension arms for the electric versions of the Traxxas Rustler, Stampede and Slash are built to withstand some of the toughest abuse, while being nearly 25% lighter than stock versions.

    Increased clearance areas in the outer portion of the arms allows increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM #80372 & #80382). These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the arms ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for superior ride and stability over the roughest tracks and terrain.

    Arms come in pairs.

    Tech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.

    Price: $10.95 Special Price: $8.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - SC10 4x4 Front]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-sc10-4x4-front.html

    RPM Front A-Arms for Associated SC10 4x4

    This is a pair of RPM Front A-Arms for the Associated SC10 4x4. RPM engineers meticulously scrutinized a set of front A-arms for the Associated SC10 4x4 to see where we could improve on the stock design. The result… An A-arm design that can handle the roughest and toughest abuse and still come back for more!

    Since strength and durability were primary design considerations, we focused on common breakage areas for strength upgrades. Hinge pin and cross holes such as shock mounts and anti-sway bar holes have been beefed up for some much-needed muscle. The structure of the A-arms is also dramatically different than the stock design, which not only helps with the strength and sturdiness of the overall design, it also helps contribute to a stronger, less flexible design than the stock A-arms. All this strength and at a weight that is virtually identical to stock Associated A-arms!

    RPM A-arms for the SC10 4x4 are molded in black from our trademark blend of extremely durable materials and are backed by our limited lifetime warranty. With a set of RPM A-arms on your ride, we’ll make sure you make it to the finish line!

    Features and Specifications:

    • Designed for Associated SC10 4x4

    • Extremely Durable Design and Materials

    • Stonger and Less Flexible Than Stock A-Arms and Virtually the Same Weight

    • Includes One Pair of Front A-Arms Molded in Black

    Price: $10.95 Special Price: $8.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - SC10 4x4 Rear]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-sc10-4x4-rear.html

    RPM R/C Rear Suspension Arms

    for Team Associated SC10 4x4

    This is a pair of RPM R/C Rear Suspension Arms for the Team Associated SC10 4x4. Following the release of our front A-arms for the Associated SC10 4x4, we now have a set of rear A-arms to complement those fronts for complete SC10 4x4 protection!

    Once again, strength and durability were primary design considerations for these rear A-arms. Similar to the fronts, hinge pin and cross-holes such as shock mounts and anti-sway bar holes have been beefed up for some serious muscle. The structure of the A-arms is also dramatically different than the stock design, which not only helps with the strength and sturdiness of the overall design, it also helps contribute to a stronger, less flexible design than the stock A-arms. All this extra strength and at a weight that is actually 2-1/2 grams per A-arm lighter than stock A-arms, for a total weight loss of 5 grams! RPM rear A-arms for the SC10 4x4 are molded in black from our trademark blend of extremely durable materials and are backed by our limited lifetime warranty.

     Features:

    • Much More Durable and Rugged Than Stock Suspension Arms

    • Hinge Pins and Shock Mounting Holes Stengthened

    • Lighter Than Stock Suspension Arms, But Much Stronger and More Durable

    • Molded in Black From RPM R/C's Proprietary Blend of Durable Nylons

    Fits:

    • Team Associated SC10 4x4 (Rear)

    Price: $10.95 Special Price: $8.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - SC10/T4 Rear Black]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-sc10-t4-rear-black.html RPM Suspension Arms - SC10/T4 Rear Black RPM SC10 / T4 A-arms were designed to solve critical durability issues stemming from stock rear A-arms. RPM RC's SC10 / T4 rear A-arms are designed to withstand some serious abuse!

    RPM RC's A-arms are over 25% thicker around the hinge pins than the stock versions which translates into pure RPM muscle to help eliminate damage during those Wow, did you see THAT crash! moments. Other design improvements include angled leading and trailing edges of the A-arms, which help the A-arms transition up and over objects much better than the blunt surfaces of the stockers.

    RPM SC10 / T4 A-arms come with all necessary mounting hardware and instructions. RPM SC10 / T4 A-arms are sold in pairs. RPM also focused on the hinge pin retaining system used on the stock A-arms. Using a small screw hole so close to the hinge pin like the stock arms do weakens the A-arms. They moved the hinge pin retaining screws in-line with the hinge pins, significantly strengthening their A-arms in the process. By eliminating the smaller 2-56 hinge pin retaining screws, RPM also eliminated the problem of the hinge pins falling out due to varying screw head diameters. Their final focus was on slop elimination. Their strict quality control allows us to tighten up all of our tolerances without fear of binding the suspension system. The final result is a smooth, free moving suspension system with minimal slop. RPM's tighter tolerances on their A-arms allows other critical adjustments such as camber and toe angles to be much more consistent, providing better and more consistent control of the SC10 or T4.

    Price: $10.95 Special Price: $8.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - SC10/T4 Rear Blue]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-sc10-t4-rear-blue.html

    RPM Suspension Arms - SC10/T4 Rear Blue RPM SC10 / T4 A-arms were designed to solve critical durability issues stemming from stock rear A-arms. RPM RC's SC10 / T4 rear A-arms are designed to withstand some serious abuse!

    RPM RC's A-arms are over 25% thicker around the hinge pins than the stock versions which translates into pure RPM muscle to help eliminate damage during those Wow, did you see THAT crash! moments. Other design improvements include angled leading and trailing edges of the A-arms, which help the A-arms transition up and over objects much better than the blunt surfaces of the stockers.

    RPM SC10 / T4 A-arms come with all necessary mounting hardware and instructions. RPM SC10 / T4 A-arms are sold in pairs. RPM also focused on the hinge pin retaining system used on the stock A-arms. Using a small screw hole so close to the hinge pin like the stock arms do weakens the A-arms. They moved the hinge pin retaining screws in-line with the hinge pins, significantly strengthening their A-arms in the process. By eliminating the smaller 2-56 hinge pin retaining screws, RPM also eliminated the problem of the hinge pins falling out due to varying screw head diameters. Their final focus was on slop elimination. Their strict quality control allows us to tighten up all of our tolerances without fear of binding the suspension system. The final result is a smooth, free moving suspension system with minimal slop. RPM's tighter tolerances on their A-arms allows other critical adjustments such as camber and toe angles to be much more consistent, providing better and more consistent control of the SC10 or T4.

    Price: $10.95 Special Price: $8.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - SC10B/SC10.2/T4.2 Front Black]]> http://www.hobbypeople.net/index.php/rpm-bumper-front-black-tubular-revo.html

    RPM R/C Front Suspension Arms (Black)

    for Team Associated SC10B, SC10.2 & T4.2FT

    This is a pair of RPM R/C Front Suspension Arms (Black) for the Team Associated SC10B, SC10.2 & T4.2FT. The SC10B, SC10.2 & T4.2FT have new, gull-wing style front A-arms that have had RPM customers contacting us for help. This new shape has been less durable than RPM customers require. The RPM A-arm design eliminates the gull-wing shape in favor of a straight A-arm design with a lowered shock mount position (the shock slips through the center of the A-arm perfectly) to retain stock suspension geometry, yet the straight A-arm style improves durability immensely.

    To help improve overall durability, we also focused our attention on the hinge pin retainers. The stock set-up uses a small screw placed next to the hinge pin, relying on the head of the screw to keep the hinge pin in place. This screw hole adds a weak spot on the A-arms. Our A-arms eliminate that screw in favor of an in-line screw to keep the hinge pin in place thus increasing the durability of our A-arms even further.

    Lastly, we removed as much slop from the A-arms as possible. We found as much as .005” (or .127mm) of slop in the stock a-arms in each hinge pin hole. That equates to camber, caster and toe angle settings that will not hold true to their settings. That is no longer an issue with RPM A-arms. Each hinge pin hole is a perfect fit, with less than .001” (or .025mm) of clearance for optimal suspension settings.

    RPM A-arms are designed to meet a wide range of demands, from the toughest backyard basher to the smoothest track-built racer, RPM performance parts will get your ride to the finish line!

    Features:

    • Straight A-Arm Design with Lowered Shock Mount Position

    • New Design Retains Stock Suspension Geometry, But is Much Stronger

    • In-Line Screw Keeps Hinge Pin in Place for Improved A-Arm Durbility

    • No-Slop Design Improves Camber and Caster Settings and Overall Handling

    Fits:

    • Team Associated SC10B, SC10.2 & T4.2FT Front

    Price: $10.95 Special Price: $8.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - SC10B/SC10.2/T4.2 Front Blue]]> http://www.hobbypeople.net/index.php/rpm-bumper-front-chrome-finish-tubular-revo.html

    RPM R/C Front Suspension Arms (Blue)

    for Team Associated SC10B, SC10.2 & T4.2FT

    This is a pair of RPM R/C Front Suspension Arms (Blue) for the Team Associated SC10B, SC10.2 & T4.2FT. The SC10B, SC10.2 & T4.2FT have new, gull-wing style front A-arms that have had RPM customers contacting us for help. This new shape has been less durable than RPM customers require. The RPM A-arm design eliminates the gull-wing shape in favor of a straight A-arm design with a lowered shock mount position (the shock slips through the center of the A-arm perfectly) to retain stock suspension geometry, yet the straight A-arm style improves durability immensely.

    To help improve overall durability, we also focused our attention on the hinge pin retainers. The stock set-up uses a small screw placed next to the hinge pin, relying on the head of the screw to keep the hinge pin in place. This screw hole adds a weak spot on the A-arms. Our A-arms eliminate that screw in favor of an in-line screw to keep the hinge pin in place thus increasing the durability of our A-arms even further.

    Lastly, we removed as much slop from the A-arms as possible. We found as much as .005” (or .127mm) of slop in the stock a-arms in each hinge pin hole. That equates to camber, caster and toe angle settings that will not hold true to their settings. That is no longer an issue with RPM A-arms. Each hinge pin hole is a perfect fit, with less than .001” (or .025mm) of clearance for optimal suspension settings.

    RPM A-arms are designed to meet a wide range of demands, from the toughest backyard basher to the smoothest track-built racer, RPM performance parts will get your ride to the finish line!

    Features:

    • Straight A-Arm Design with Lowered Shock Mount Position

    • New Design Retains Stock Suspension Geometry, But is Much Stronger

    • In-Line Screw Keeps Hinge Pin in Place for Improved A-Arm Durbility

    • No-Slop Design Improves Camber and Caster Settings and Overall Handling

    Fits:

    • Team Associated SC10B, SC10.2 & T4.2FT Front

    Price: $10.95 Special Price: $8.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - Slash 4x4 Fr or Rr Black]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-slash-4x4-fr-or-rr-black.html

    RPM eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically. As a bonus, they cut 6.5 grams of weight off of each A-arm! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!

    RPM A-arms carry over their traditional look with their 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with either blue or black to choose from.

    RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty.

    Price: $11.95 Special Price: $8.96

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - Slash 4x4 Fr or Rr Blue]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-slash-4x4-fr-or-rr-blue.html

    RPM Suspension Arms

    Front or Rear for Traxxas Slash 4x4 - Blue

    This is a pair of RPM Suspension Arms Front or Blue for the Traxxas Slash 4x4 molded in Blue. Since the release of the Traxxas Slash 4x4, RPM customers flooded our e-mail in-box and called us to let us know how badly they wanted RPM A-arms for these trucks. They’re here! RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically. As a bonus, we cut 6.5 grams of weight off of each A-arm!  That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!

    We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts.

    RPM A-arms are molded in our trademark blend of incredibly durable nylons  and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!

    Features and Specifications:

    • Designed for the Traxxas Slash 4x4 - A Must-Have Upgrade

    • Extremely Durable Design and Materials

    • Stonger and Less Flexible Than Stock A-Arms and Less Weight

    • Includes One Pair of Suspension Arms Molded in Blue for Front or Rear

    Price: $11.95 Special Price: $8.96

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - Slash Rear- Blue]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-slash-rear-blue.html RPM Suspension Arms - Slash Rear- Blue RPM rear A-arms for the Traxxas Slash are designed specifically for the Slash they are not multi-platform A-arms like the stock versions.

    RPM's first design challenge was to beef up their version of the Slash rear A-arms to handle some serious abuse. The material around the inner and outer hinge pins has been increased by a whopping 64%! Then they eliminated all of the unnecessary holes and shock mounts that would be needed on other vehicles but not on the Slash, which significantly reduced the weight of the A-arms while improving crash durability. Even after all of the increased muscle has been factored in, the A-arms still come in at over 10% lighter than the original arms! Their final design task was to improve the fit and finish and what RPM came up with will eliminate most of the slop in the rear suspension system! The Slash owner can tighten things up to near perfect out back simply by adding in a set of RPM #80382 Rear Bearing Carriers. RPM Slash rear A-arms use stock suspension geometry and include stock rear toe angles.

    RPM Slash rear A-arms are not only stronger and more durable than stock, they are also more rigid and less flexible too, making them the perfect addition to those race-level Slashes on the track. Additionally, the new geometry design leaves no place for dirt and rocks to get caught in the lower A-arm and reduces the chances of rocks and debris getting stuck between the axle and the arm.

    Tech Notes: Stock rear axle carriers have an upper and lower hinge pin hole. RPM Slash Rear A-arms only allow the use of the original, lower hole location to be used. The upper axle carrier hole (which would lower the ride height in the back too much) cannot be used. To lower the rear end of the truck, RPM recommends using the outer shock mount hole positions in the A-arm.

    Price: $11.95 Special Price: $8.96

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - Slash Rear-Black]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-slash-rear-black.html RPM Suspension Arms - Slash Rear-Black RPM rear A-arms for the Traxxas Slash are designed specifically for the Slash they are not multi-platform A-arms like the stock versions.

    RPM's first design challenge was to beef up their version of the Slash rear A-arms to handle some serious abuse. The material around the inner and outer hinge pins has been increased by a whopping 64%! Then they eliminated all of the unnecessary holes and shock mounts that would be needed on other vehicles but not on the Slash, which significantly reduced the weight of the A-arms while improving crash durability. Even after all of the increased muscle has been factored in, the A-arms still come in at over 10% lighter than the original arms! Their final design task was to improve the fit and finish and what RPM came up with will eliminate most of the slop in the rear suspension system! The Slash owner can tighten things up to near perfect out back simply by adding in a set of RPM #80382 Rear Bearing Carriers. RPM Slash rear A-arms use stock suspension geometry and include stock rear toe angles.

    RPM Slash rear A-arms are not only stronger and more durable than stock, they are also more rigid and less flexible too, making them the perfect addition to those race-level Slashes on the track. Additionally, the new geometry design leaves no place for dirt and rocks to get caught in the lower A-arm and reduces the chances of rocks and debris getting stuck between the axle and the arm.

    Tech Notes: Stock rear axle carriers have an upper and lower hinge pin hole. RPM Slash Rear A-arms only allow the use of the original, lower hole location to be used. The upper axle carrier hole (which would lower the ride height in the back too much) cannot be used. To lower the rear end of the truck, RPM recommends using the outer shock mount hole positions in the A-arm.

    Price: $11.95 Special Price: $8.96

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - Summit Front Left Black]]> http://www.hobbypeople.net/index.php/rpm-black-front-left-a-arms-traxxas-summit.html

    RPM Front Left A-Arms (Black)

    for Traxxas Summit, Revo & E-Revo

    This is a set of RPM Front Left A-Arms (Black) for Traxxas Summit, Revo & E-Revo vehicles. In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our front right A-arms for the Traxxas Revo are already compatible with the Summit but due to the extended T-Lock differential on the left side, our Revo front left A-arms would not fit. That is no longer an issue with these A-arms. With a revamped cross-brace to clear the T-Lock differential, our Summit front left A-arms will allow full suspension travel and significantly improve overall suspension durability.

    RPM front A-arms for the Traxxas Summit are molded from our indestructible blend of engineering grade nylons for unmatched performance and durability. Every RPM molded part in manufactured in the USA and carries with it a limited lifetime warranty against breakage. If you’re tired of replacing broken stock parts over and over, give RPM a try.

    Features:

    • Revamped Cross-Brace to Clear T-Lock Differential

    • Allows Full Suspension Travel and Significantly Improves Overall Suspension Durability

    • Molded a Blend of Engineering Grade Nylons for Unmatched Performance and Durability

    • Made in the USA - Limited Lifetime Warranty Against Breakage

    Fits:

    • Traxxas Summit, Revo and E-Revo

    Price: $14.95 Special Price: $11.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - T-Maxx 2.5 & 3.3 Blue]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-t-maxx-2-5-and-3-3-blue.html RPM Suspension Arms - T-Maxx 2.5 & 3.3 Blue

    RPM A-arms for the 2.5R & 3.3 versions of the Traxxas T-Maxx are built to handle some serious abuse! We've redesigned these a-arms to compensate for the larger axle diameters of the 2.5R & 3.3 with axle clearance zones built right in, yet these clearance areas do not compromise the strength. These A-arms are lighter than ever before, yet still maintain all of the qualities that RPM customers have come to expect from RPM A-arms rugged durability, unrivaled performance, strength comparable to or better than many alloy A-arms, yet are lighter than those same alloy parts and pricing unbeatable by any other aftermarket A-arm set existing. All this and we back our A-arms with the best breakage warranty in the R/C industry!

    RPM mold's these A-arms in four different color choices, including a dyeable version for the ultimate in customization options and are sold in packages of one upper and one lower A-arm.

    Four packages of RPM A-arms will be needed to complete one truck. These A-arms are compatible with all previous versions of both the T-Maxx and the E-Maxx. T-Maxx 1.5 owners will need to upgrade to the longer T-Maxx 2.5 turnbuckles and axles.

    Price: $11.89 Special Price: $8.92

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - T-Maxx 2.5R & 3.3 Black]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-t-maxx-2-5r-and-3-3-black.html RPM Suspension Arms - T-Maxx 2.5R & 3.3 Black

    RPM A-arms for the 2.5R & 3.3 versions of the Traxxas T-Maxx are built to handle some serious abuse! We've redesigned these a-arms to compensate for the larger axle diameters of the 2.5R & 3.3 with axle clearance zones built right in, yet these clearance areas do not compromise the strength. These A-arms are lighter than ever before, yet still maintain all of the qualities that RPM customers have come to expect from RPM A-arms rugged durability, unrivaled performance, strength comparable to or better than many alloy A-arms, yet are lighter than those same alloy parts and pricing unbeatable by any other aftermarket A-arm set existing. All this and we back our A-arms with the best breakage warranty in the R/C industry!

    RPM mold's these A-arms in four different color choices, including a dyeable version for the ultimate in customization options and are sold in packages of one upper and one lower A-arm.

    Four packages of RPM A-arms will be needed to complete one truck. These A-arms are compatible with all previous versions of both the T-Maxx and the E-Maxx. T-Maxx 1.5 owners will need to upgrade to the longer T-Maxx 2.5 turnbuckles and axles.

    Price: $11.89 Special Price: $8.92

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - The Ten-SCTE, Ten-T & 810 Front]]> http://www.hobbypeople.net/index.php/rpm-front-a-arms-the-ten-scte-ten-t-810.html

    RPM Front A-Arms

    for Losi TEN-SCTE, TEN-T and 810

    This is a set of RPM Front A-Arms for the Losi TEN-SCTE, TEN-T and 810. RPM A-arms for the Losi TEN-SCTE, TEN-T & 810 are designed with strength and durability as our primary goals. The result - a set of ultra strong, incredibly durable A-arms that are sure to exceed the demands of racers and bashers alike. RPM A-arms are designed using our standard 30° leading and trailing edges which gives each A-arm a slim, aerodynamic shape and helps the A-arm transition up and over objects instead of bluntly plowing into them. Key areas that needed additional strength such as the outer hinge pin support diameters have been beefed up by as much as 60% so those less than perfect "incidents" won’t end your day of fun.

    For performance enhancements, we tightened all of the slop out of the A-arm design, creating a much smoother, more consistent platform for reliable camber, caster and toe angle settings. Suspension geometry has been left to stock settings, making RPM A-arms a simple swap with very little needed to be done to get back on the track.

    RPM A-arms are sold in pairs, molded in our trademark blend of indestructible nylons and manufactured in the USA!

    Features

    • 30º Leading and Trailing Edges Help Vehicle Transition Up and Over Objects

    • Reduced Slop Creates Much Smoother, More Consistent Platform

    • Suspension Geometry Has Been Left to Stock Settings

    • Molded Out of RPM's Trademark Blend of Indestructible Nylons

    Fits:

    • Losi TEN-SCTE, TEN-T and 810

    Price: $12.95 Special Price: $9.71

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms - The Ten-SCTE, Ten-T & 810 Rear]]> http://www.hobbypeople.net/index.php/rpm-rear-a-arms-the-ten-scte-ten-t-810.html

    RPM Rear A-Arms

    for Losi TEN-SCTE, TEN-T and 810

    This is a set of RPM Rear A-Arms for the Losi TEN-SCTE, TEN-T and 810. RPM A-arms for the Losi TEN-SCTE, TEN-T & 810 are designed with strength and durability as our primary goals. The result - a set of ultra strong, incredibly durable A-arms that are sure to exceed the demands of racers and bashers alike. RPM A-arms are designed using our standard 30° leading and trailing edges which gives each A-arm a slim, aerodynamic shape and helps the A-arm transition up and over objects instead of bluntly plowing into them. Key areas that needed additional strength such as the outer hinge pin support diameters have been beefed up by as much as 60% so those less than perfect "incidents" won’t end your day of fun.

    For performance enhancements, we tightened all of the slop out of the A-arm design, creating a much smoother, more consistent platform for reliable camber, caster and toe angle settings. Suspension geometry has been left to stock settings, making RPM A-arms a simple swap with very little needed to be done to get back on the track.

    RPM A-arms are sold in pairs, molded in our trademark blend of indestructible nylons and manufactured in the USA!

    Features

    • 30º Leading and Trailing Edges Help Vehicle Transition Up and Over Objects

    • Reduced Slop Creates Much Smoother, More Consistent Platform

    • Suspension Geometry Has Been Left to Stock Settings

    • Molded Out of RPM's Trademark Blend of Indestructible Nylons

    Fits:

    • Losi TEN-SCTE, TEN-T and 810

    Price: $12.95 Special Price: $9.71

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Suspension Arms/Bulkhead - RC10B4.2]]> http://www.hobbypeople.net/index.php/rpm-suspension-arms-bulkhead-rc10b4-2.html

    RPM Front A-Arms & Bulkhead

    for Team Associated RC10B4, B4.1 & B4.2 Series Vehicles

    This is an RPM Front A-Arms & Bulkhead for the Team Associated RC10B4, B4.1 & B4.2 Series Vehicles. RPM A-arms for the Associated B4, B4.1 & B4.2 were designed to solve several customer-related complaints about the stock A-arms. Foremost is durability. Our B4 front A-arms are designed to withstand some serious abuse! We’ve redesigned the entire front end, replacing the stock front bulkhead with a version that helps spread impact forces over a larger area at the inner hinge pin mounts. RPM front A-arms are wider at the inner hinge pin by nearly 3/16” without altering suspension geometry. We also focused on the hinge pin retaining system used on the stock A-arms. Using a small screw hole so close to the hinge pin like the stock arms do creates structural weaknesses. We moved the hinge pin retaining screws in-line with the hinge pins, significantly strengthening our A-arms in the process. By eliminating the smaller 2-56 hinge pin retaining screws, we’ve also eliminated the problem of the hinge pins falling out due to varying screw head diameters.

    Our final focus was on slop elimination. Our strict quality control allows us to tighten up all of our tolerances without fear of binding the suspension system. The final result: a smooth, free moving suspension system with minimal slop. Our tighter tolerances on our A-arms allows other critical adjustments such as camber and toe angles to be much more consistent, which provides better and more consistent control of the B4.

    Features:

    • Greater Durability Than Stock A-Arms

    • Tigher Tolerances Result in a Smooth, Free Moving Suspension with Minimal Slop

    • Allows More Consistent Camber and Toe Angle Adjustments

    *RPM Front A-arms for the Team Associated RC10B4, B4.1 & B4.2 series vehicles require the use of the bulkhead we supply in the kit. Stock or any other aftermarket bulkheads will not work with RPM A-arms.

    Price: $14.95 Special Price: $11.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Tail Light Set - RPM Slash Rear Bumper]]> http://www.hobbypeople.net/index.php/rpm-tail-light-set-rpm-slash-rear-bumper.html

    RPM Tail Light Set - RPM Slash Rear Bumper A true-to-scale tail light set for the Traxxas Slash that bolts right on the RPM rear bumper, taking care of the final piece in the night running puzzle. RPM RC's tail lights add that concours winning touch for full-scale realism! With a set of bright white lights out front (using RPM light canister sets, of course!) and a set of RPM red tail lights out back, finding your way around at night has never been easier! Our Traxxas Slash tail light set comes complete with everything needed to bolt a pair of 3mm LEDs (LEDs not included) to an RPM Slash rear bumper (RPM #81002, #81003 or #81005) including a pair of red tail light lenses, two lens housings and a pair of mounting plates (the RPM mounting plates can be modified to fit other applications such as the Associated SC10 and other short course vehicles as well). The lens housings can also be modified to fit other areas of different vehicles for alternate effects too, such as running a second set of lights as amber marker lights (identical to full-sized short course and Baja racing trucks).

    Tech Notes: 3mm LED lights are not included. The RPM mounting plates and lens housings can be modified to fit any number of applications but warranty restrictions do apply. See instructions for more details. RPM tail light sets are designed specifically for the RPM rear bumper for the Traxxas Slash (RPM #81002, #81003 & #81005). Modifications may be made to make them fit other applications but warranty restrictions may apply.

    Price: $9.95 Special Price: $7.46

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Toe-in Gauge 1/12, 1/10, 1/8 Cars]]> http://www.hobbypeople.net/index.php/rpm-toe-in-gauge-1-12-1-10-1-8-cars.html

    RPM Toe-in Gauge 1/12, 1/10, 1/8 Cars

    Toe-in Gauge 1/12, 1/10, 1/8 Cars

    If you are simply a hobbyist that enjoys R/C vehicles or an all out R/C racer or anywhere in between, this tool is a must for your toolbox! This gauge allows you to do track side checks of the toe-in without removing the wheels! The gauge checks toe through the simple method of comparing the width of the wheels at the rear of the tire to the width of the wheels at the front of the tire! It is accurate to within one half of a degree per side and closer! Also can be used to check legal width of off-road buggies and trucks. Now available with a second hole to check narrower vehicles such as sedans!

    Price: $9.95 Special Price: $7.46

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM True-Track A-Arm Conversion - Revo Black]]> http://www.hobbypeople.net/index.php/rpm-true-track-a-arm-conversion-revo-black.html

    RPM True-Track A- Arm Conversion - Revo Black The RPM True-Track Rear A-arm Conversion Kit for the Revo eliminates some of the biggest headaches associated with toe link rear ends. Rear toe angles are nearly impossible to set accurately and there isn't a gauge currently made that can accurately identify whether each individual wheels toe angle is set correctly in relation to the chassis. The RPM True-Track rear end kit completely eliminates the rear toe links, locking in the rear toe angle at a solid 1.5 degrees per side for a total rear toe-in angle of 3 degrees. By getting rid of the rear toe links, RPM has completely eliminated all rear bump steer! That means the rear toe angle remains consistent throughout the entire range of suspension travel, providing superior rear end tracking regardless of the terrain.

    Price: $37.99 Special Price: $28.49

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Wheelie Bars-Slash-for use w/RPM Bumpers]]> http://www.hobbypeople.net/index.php/rpm-wheelie-bars-slash-for-use-w-rpm-bumpers.html

    Price: $9.95 Special Price: $7.46

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Wide Front Bumper Black - B4/T4/GT2]]> http://www.hobbypeople.net/index.php/rpm-wide-front-bumper-black-b4-t4-gt2.html RPM Wide Front Bumper Black - B4/T4/GT2

    Wide Front Bumper for B4 & T4 (black) .

    The RPM wide front bumper for the Assoc. B4 & T4 was designed to add in loads of bash-proof protection! At a full 6 in width, RPM's bumper can handle some serious abuse! It extends far enough in front of the vehicle to absorb some of the most brutal impacts without transferring the major shock of the impact into the more fragile areas of the vehicle while providing ample front-end chassis skid protection from hard landings. RPM's front bumper also has strengthening ribs built into it that have a multi-purpose design; The ribs not only add strength to the bumper, but they act as low friction skid rails and they help protect the screw-heads holding the bumper to the bulkheads. The RPM wide front bumper for the B4 & T4 uses all four bulkhead mounting screws. This helps disperse any impact forces that do make it to the chassis over twice the area of a stock bumper, thereby reducing or eliminating damage to other more fragile areas of the vehicle.

    Price: $8.95 Special Price: $6.71

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Wide Front Bumper Blue - B4/T4/GT2]]> http://www.hobbypeople.net/index.php/rpm-wide-front-bumper-blue-b4-t4-gt2.html

    RPM Wide Front Bumper Blue - B4/T4/GT2

    This is an optional blue RPM Wide Front Bumper for the Associated RC10B4 buggy and the RC10T4 truck.

    Price: $8.95 Special Price: $6.71

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Wide Front Bumper/A-Arm Mount Black - 18T]]> http://www.hobbypeople.net/index.php/rpm-wide-front-bumper-a-arm-mount-black-18t.html RPM Wide Front Bumper/A-Arm Mount Black - 18T

    RPM is proud to offer a wide front bumper to help protect the fragile front-end components of the Associated RC18T. Our RC18T wide front bumper has all sorts of cool features that are bound to impress any RC18T owner.

    Spec's

  • The RPM RC18T bumper is thicker than the stock version and wider for 3-5/16 of front-end protection!
  • The extra width of the bumper helps protect the fragile front shocks.
  • Our bumpers are not bolt-on-over-the-stock versions; our wide front bumpers completely replace the stock version.
  • The mounting screw holes are countersunk and recessed into the RPM wide front bumper preventing impacts from damaging the screw heads.
  • RPM nylons are much stronger than the stock material preventing the hinge pins from blowing out the side of the A-arm mounts.
  • RPM RC18T bumpers carry the RPM lifetime breakage warranty.
  • RPM has tightened the tolerances for less suspension slop while still maintaining free motion of the A-arms.
  • We reduced the front angle of the bumper from the stock 65 degrees to a more bumper friendly 35 degrees.
  • Price: $6.95 Special Price: $5.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[RPM Wide Front Bumper/A-Arm Mount Blue - 18T]]> http://www.hobbypeople.net/index.php/rpm-wide-front-bumper-a-arm-mount-blue-18t.html

    RPM Wide Front Bumper/A-Arm Mount Blue - 18T

    RPM is proud to offer a wide front bumper to help protect the fragile front-end components of the Associated RC18T. Our RC18T wide front bumper has all sorts of cool features that are bound to impress any RC18T owner.

    Spec's

    • The RPM RC18T bumper is thicker than the stock version and wider for 3-5/16 of front-end protection!
    • The extra width of the bumper helps protect the fragile front shocks.
    • Our bumpers are not bolt-on-over-the-stock versions; our wide front bumpers completely replace the stock version.
    • The mounting screw holes are countersunk and recessed into the RPM wide front bumper preventing impacts from damaging the screw heads.
    • RPM nylons are much stronger than the stock material preventing the hinge pins from blowing out the side of the A-arm mounts.
    • RPM RC18T bumpers carry the RPM lifetime breakage warranty.
    • RPM has tightened the tolerances for less suspension slop while still maintaining free motion of the A-arms.
    • We reduced the front angle of the bumper from the stock 65 degrees to a more bumper friendly 35 degrees.

     

    Price: $6.95 Special Price: $5.21

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[SKYARTEC Butterfly Ultra-Quad BL RTF Drone S Model]]> http://www.hobbypeople.net/index.php/skyartec-ultra-quad-bl-rtr-butterfly.html

    Skyartec Butterfly S Ultra-Quad BL RTF

    So Much More Than a Toy

    Skyartec's Butterfly is a new generation of sport-quad. Ready-to-fly with brushless motors, LiPo power, and a computer radio, it's an advanced quad that can fly outdoors or fly in wind, and remain very stable. It's stable for the new pilot, and powerful enough for serious outdoor flying. And this quad even comes with its own aluminum carry-case.

    Features:

    • CNC-Cut Fiberglass Frame

    • Polycarbonate Canopy with Stainless Steel Canopy Mounting Pegs

    • Machined and Anodized Aluminum Prop Nuts

    • Transmitter: Skyartec NASA701 2.4GHz 7-Channel Computerized 2.4GHz

    • Receiver: Skyartec SKY-707 2.4GHz 3-Axis Compass 7-Channel

    • Battery: Skyartec 1300mAh 2S 25C LiPo with EC2 Connector and JST-XH Balancing Tap

    • Motors: Two Skyartec 2200KV CW1804 and Two CCW1804 Brushless Outrunners

    • Propellers: Skyartec 3-Blade Propellers

    • Flight Time: 5-7 Minutes

    Specifications:

    • Radial Span: 10.5" (267mm)

    • Flying Weight: 10.6 oz. (300g)

    • Height: 4" (100mm)

    Price: $249.99 Special Price: $219.99

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[SKYARTEC Wasp X3 FBL Heli RTF - All-Metal Head]]> http://www.hobbypeople.net/index.php/skyartec-wasp-x3-fbl-heli-rtf-all-metal-head.html

    SKYARTEC Wasp X3 FBL Heli RTF – All Metal Head

    The SKYARTEC WASP X3 a brand new product using new technology. The  SKYARTEC WASP X3 comes with  an independently-developed multi-function flybarless system, greatly improving the helicopter's performance. The exquisitely simple body structure makes for stable flight, convenient maintenance, and more flexible 3D flight! A technological design of power and beauty, the latest rotor head allows the flight performance to be fully adjusted. Further, the SKYARTEC WASP X3 is configured with the powerful function of a NASA701 LCD 2.4G radio control.

    The SKYARTEC WASP X3 brings AVCS tail-lock function, elevator and aileron are balance adjustable functions, and adjustable D/R sensor. All these features help the helicopter fly more steadily, and is more suitable for beginners.

    Features

    • Flybarless design, low power loss, greatly upgrade cycle life and flight time.

    • Hi-performance 3-axis flybarless system, automatically adjusting to make your flight more stable

    • Comes with fast, hi-torque 9g digital servo

    • Amazingly compact all-in-one and lightweight design will guarantee you the most exciting flight experience

    • Glass fiber materials offer a lightweight, extremely strong and robust frame

    • Advanced configuration helps you control the helicopter precisely and have the incredible real-time response while performing a variety of stunts

    Specifications

    • Length: 475mm

    • main rotor blade: 470mm

    • tail blade: 110mm

    • copper gear: 14T

    • main gear: 120T

    • flying weight: 260g

    • remote conotrol distance: 2500 feet (762m)

    Includes

    WASP X3V helicopter; 15A brushless ESC; SKY-X302V 3-axis 2 in 1 board (receiver&gyro); 9g servo x3; 9g digital servo (tail servo) x1; BL250 4500KV brushless motor; NASA701 LCD 2.4GHz 7ch TX; 7.4V 900mah LI-Po battery; balance charger; power supply.

    Price: $249.99 Special Price: $219.99

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[Tamiya 1/24 Enzo Ferrari w/Detail Up Parts]]> http://www.hobbypeople.net/index.php/tamiya-1-24-enzo-ferrari-w-detail-up-parts.html

    Tamiya 1:24 Enzo Ferrari w/Detail Up Parts

    Plastic Model Kit

    This is a Tamiya 1:24 Enzo Ferrari w/Detail Up Parts Plastic Model Kit. 2012 marks the 10th anniversary of the Enzo Ferrari and Tamiya is celebrating the occasion with this special kit. Tamiya's 1:24 scale Enzo Ferrari (Item 24302) has been packaged together with an extensive detail parts set to enable the modeler to build the Enzo kit with a higher level of realism. These new detail up parts include photo-etched parts to depict pedals, engine grille meshes, and windshield wipers, as well as metal exhaust tips, seatbelt stickers in 3 colors (red, yellow, black) and aluminum stickers to depict heat-resistant material in the engine bay section.

    Specifications and Features:

    • 1:24 Scale Enzo Ferrari # 24302

    • Length: 197mm

    • Includes Detail Up Parts Set to Improve Realism

    • Photo-Etched Pedals, Engine Grille Meshes and Windshield Wipers

    • Metal Exhaust Tips

    • Seatbelt Sticker in Three Colors and Aluminum Stickers to Depict Heat-Resistant Material in Engine Bay

    • Highly Detailed V12 Engine

    • Doors and Rear Cowling Can Be Opened to Show Interior and Engine Details

    *This is a plastic model kit that requires painting and assembly. Paint and modeling tools required and available separately.

    Price: $79.99 Special Price: $59.99

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[Traxxas Slash Pro 2WD RTR 1/10 SCT w/ 2.4 Tx, Battery & Charger]]> http://www.hobbypeople.net/index.php/traxxas-slash-2-4-2wd-truck-w-7-cell-battery-charger.html

    The Traxxas Slash Pro 2WD Short-Course Truck!

    Ready-To-Race® with TQ 2.4GHz Radio System and Power Cell 7-cell NiMH Battery!

    Intense Short-Course Racing Action!

    The award-winning Traxxas Slash Short-Course Race Truck puts you in the drivers seat for intense fender-to-fender, high-flying off-road action. The full-scale Short-Course Race Trucks embody the spirit of Traxxas R/C with their extreme 900+ horsepower racing engines full-throttle, dirt-roosting power slides, giant suspension travel, and Supercross-style big-air jumps. The Traxxas Slash brings all the action home so you can experience the high-speed head-to-head competition at the track or in your own backyard. The Slash was inspired by the TORC™ (THE Traxxas Off-Road Championship™) Pro 2WD class. The Pro 2WD class specifies rear-wheel drive trucks purpose built to fly over jumps and rip full-throttle through the turns. The Traxxas Slash hangs it out for an all new way to challenge your driving skills. The 4-wheel independent suspension has been carefully tuned to replicate the Pro 2 driving and handling experience as closely as possible. The scale appearing tires provide just the right amount of bite and thick, blinding clouds of dirt roost.

    Off-Road Anywhere

    When the racing action cools down, the Traxxas Slash is well-equipped to tackle all of your off-track driving adventures. The long travel suspension and oil-filled shocks easily absorb jumps and rough terrain. The unique chassis design provides huge center ground clearance to drive over deep ruts, rocks, and other obstacles that leave ordinary R/C trucks stuck. The tires use advanced tread design and sophisticated rubber compounds to provide incredible grip off-road with enough versatility to also perform well on concrete and asphalt. The fenders cover the tires so you bang against your driving buddies without getting tangled up.

    The Revo-spec Torque-Control™ slipper clutch design delivers smooth operation, precise adjustment, and consistent traction control. The bellcrank steering system virtually eliminates bump steer for precise handling and control. A digital steering servo delivers lightning fast response.

    Sealed Electronics Extend Your Driving Fun

    Traxxas shocked enthusiasts with the release of their exclusive watertight, sealed electronics in the E-Maxx that provided the freedom to drive where you want to drive through water, mud, snow, and other wet-running conditions that wouldn't have been possible before. The proven XL-5 electronic speed control and the mini receiver are sealed against the elements giving you the freedom go places you might not have thought possible. It opens up a whole new world of adventure and fun. Wet muddy tracks are no problem for the Slash. The battery compartment makes it easy to install batteries and the clever design makes it quickly adaptable for either 6 or 7-cell running (hump packs or stick packs).

    Modified Muscle

    The Titan 12T 550 modified motor is designed for incredible mod-motor power output with virtually maintenance-free operation, and long-lasting performance. The Titan 12T 550 motor's integrated cooling fan pulls cool air through the motor to keep temperatures down. Airflow is routed through vent tunnels molded in the motor plate. A cooler running motor equates to faster speeds, longer runtime, and extended motor life. The XL-5 Electronic Speed Control offers high current handling, EZ-Set® one-button setup, and smooth high-frequency control. Three drive profiles, low voltage detection, thermal shutdown protection, gold-plated connectors, and incredibly low resistance are all features you might expect to only be available on an expensive replacement ESC. As today's batteries store more and more energy inside their cells, traditional battery connectors could no longer keep up. The included patented Traxxas High-Current Connector opens the door for unrestricted current flow.

    Precision 2.4GHz Control Radio System

    With the TQ™ 2.4GHz radio system, you just switch on a drive. There are no channels or frequencies to manage, so the focus is on having fun. The TQ’s ergonomic design is comfortable for all-day driving, and its sleek lines are enhanced by an internal antenna that is impervious to damage.

    Training Mode™

    Traxxas' exclusive patented Training Mode let's everyone get in on the racing action. Just press a button to limit full-throttle power to 50%. This allows young or new drivers to safely develop their control skills before unlocking full power to the mighty Titan 12T motor. The Slash is perfect for drivers at all experience levels. Training mode even makes it easy to hand the transmitter over to your friends who have never driven a radio controlled truck before.

    Brushless Ready

    The Traxxas Slash is built for extreme Velineon™ brushless horsepower (sold separately). Simply bolt it in and 7-cell speed jumps to 40+mph. Add 11.1V Traxxas Power Cell LiPo batteries and you have the potential to double your speed. Bigger roosts and longer hang-time are right at your fingertips. The included steel transmission gears, full ball bearings, and high-quality metal turnbuckle links are the winning setup for brushless durability. The factory-installed planetary differential is Traxxas-tough with hardened steel gears that never need adjusting! Perfect for long-lasting, all-day fun. Accessory battery hold downs are available for use with large capacity LiPo battery packs that can extend speed and run time. Compare the durability and features to others and you'll see that only Traxxas makes them truly brushless ready.

    XL-5 Waterproof Electronic Speed Control

    Designed and engineered by Traxxas, the XL-5 Electronic Speed Control handles the elements while smoothly supplying power to the motor. This high-performance ESC is packed with impressive specifications that are normally only found on more expensive high-end replacement units. The XL-5 features a completely waterproof design, three throttle profiles, low voltage detection, Thermal Shutdown Protection, 4-8 cell NiMH and 2-cell LiPo compatibility, and built-in BEC. High frequency operation combined with ultra-low resistance make the XL-5 an efficient and ultra-smooth fully proportional speed control. An exclusive feature on the XL-5 is the patented Training Mode™. This profile reduces the overall power output of the XL-5 by 50% making it easier for young or new drivers to develop their control skills before unleashing full-power operation. The XL-5 is manufactured by Traxxas to ensure the highest level of quality and support.

    • Innovative watersealed design
    • Three Drive Profiles
      • Sport Mode - Forward / Brake / Reverse
      • Race Mode - Forward / Brake
      • Training Mode™ - 50% Forward / Brake / 50% Reverse (patented)
    • 12-Turn motor limit for 550 size motors
    • 15-Turn motor limit for 540 size motors
    • Integrated on/off switch
    • Traxxas EZ-Set® one-button setup
    • LiPo, NiCad, and NiMH compatible with two-stage low-voltage detection
    • Large heat sink
    • High-efficiency MOSFET transistors

    Titan® 12-Turn 550 Modified Motor

    The Slash includes a powerful Titan 12T 550 modified motor with internal cooling fan. The Titan's over-sized armature (30% larger compared to 540-sized armatures) is equipped with 12-turns of pure copper wire for big torque and increased power-handling capabilities. Lower running temperatures are achieved with the integrated cooling fan. The Titan 12T requires very little maintenance and is designed for consistent torque and high speeds from run to run, without fading.

    Beyond the specs, the Titan 12T is made for dirt-roosting torque, lightning-quick acceleration, big-air jumps, and just about any other 4-wheel fun that demands real horsepower. Be sure to check out the videos to see it in action!

    Precision 2.4GHz Control

    With the TQ™ 2.4GHz radio system, you just switch on a drive. There are no channels or frequencies to manage, so the focus is on having fun. The TQ’s ergonomic design is comfortable for all-day driving, and its sleek lines are enhanced by an internal antenna that is impervious to damage.

    Traxxas Power Cell Battery Included!

    Slash includes a genuine Power Cell Battery Pack to make sure you experience all the performance that's been engineered into your Traxxas model. Power Cell packs are optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and Traxxas' patented, high-output, gold plated, high-current connectors. Seven cells give Slash 8.4 volts of motivation for maximum speed, and precision assembly with attractive, individually wrapped cells and clear overwrap complete the Traxxas Power Cell package.

    Traxxas High-Current Connectors

    The XL-5 electronic speed control comes equipped with the revolutionary patented Traxxas High-Current Connectors. Designed to handle high-current applications, Traxxas Connectors effortlessly funnel the battery's total power to the electronics keeping things running cool and at full capacity.

    Digital High-Torque Waterproof Steering Servo

    A race truck needs a powerful steering servo for responsive performance. The waterproof steering servo (#2075) uses O-ring seals to keep the fun going when things get wet. The Traxxas digital high-torque servo provides precise steering authority and speed for wheel-to-wheel racing in the back yard or on the track.

    Sealed Watertight Receiver Box

    A ground-breaking new sealed receiver box is another Traxxas innovation that puts the Traxxas Slash Short-Course Truck in a league of its own. The antenna and servo wires route neatly through a special water-tight seal. A custom blue O-ring seals the receiver box to protect the receiver from water. The receiver can be removed for service and aftermarket receivers can be installed without losing the sealing properties of the box. An aluminum antenna crimp nut looks good and holds the antenna tube securely in place. Patent pending.

    Securely Mounted Electronics

    The ESC, receiver, and steering servo are screwed to the chassis for ultimate mounting security. There's no servo tape to loosen over time from dirt, heat, water, and collisions.

    Long-Wheelbase Chassis

    Designed from the ground up, the Slash chassis features a 13.2" wheelbase while offering over 3.5 inches inches of ground clearance. The chassis includes drain holes and a battery tray channel for routing servo wires to the receiver. Optional electronic speed control mounting bosses are incorporated into the chassis, making it easy to upgrade to the Extreme Power of the Velineon Brushless Power System. For race track competition, a transponder mount is located under the front shock tower when every second counts.

    Adjustable Battery Hold Down

    The unique chassis design allows the use of 6-cell stick or side-by-side style battery packs and 7-cell stick, side-by-side, and hump battery packs for unmatched versatility. The extended chassis enables the various battery packs to be positioned forward or backward for front/rear weight bias tuning. An optional battery hold down kit is available for use with oversized batteries.

    Chassis Nerf Bars and New Body Mounts

    Integrated chassis nerf bars offer side body support for door to door racing action. Ruggedly designed body mounts incorporate reinforced washers to support the short course truck body during big-air jumps and high-speed runs.

    Scale Front and Rear Bumpers

    Engineered to handle the abuse of bumper to bumper bashing, the scale tube-style bumpers are designed to absorb brutal impacts while looking the part of a true short course race truck.

    Licensed BFGoodrich® Mud-Terrain™ T/A® Tires

    Realistic looks, realistic performance. Slash's officially licensed tires have excellent grip in the dirt and just the right amount of slide on pavement and are mounted and pre-glued on impressive 2.2" satin-finish wheels.

    Adjustable Steel Turnbuckles

    Factory fitted, heavy-duty steel turnbuckles allow camber and toe tuning. The Slash is completely adjustable right out of the box to fine tune handling agility and high-speed performance. Captured rod ends provide unmatched durability and they simply won't pop off.

    Metal Gear Magnum 272™ Transmission

    The Slash's Magnum 272 transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears, power is delivered to the rear wheels via durable telescoping U-joint driveshafts for maximum efficiency and articulation. The bulletproof Torque-Control slipper clutch and metal gear Magnum transmission are ready to handle any power system upgrade including the Extreme Power of the Velineon Brushless Power System.

    Steel-Composite Planetary Gear Differential

    The composite Traxxas planetary gear differential features a steel ring gear with a nylon housing for long life. It uses hardened steel internal gears for maximum strength during rigorous off-road bashing. This type of differential requires virtually no maintenance and its efficient design puts maximum tire-shredding torque to the wheels.

    Revo®-spec Torque-Control™ Slipper Clutch

    Advanced Revo technology is utilized to manage the massive power from the Titan 12T motor. The Torque-Control slipper clutch uses special semi-metallic friction material and finned aluminum alloy pressure plates to dissipate heat and provide consistent traction control. The semi-metallic friction material remains stable across a wide temperature range to provide smooth, linear engagement you can count on, run after run. Spur gears can be removed and replaced without altering the slipper adjustment.

    Motor Mount with Integrated Cooling Channels

    The sealed gearbox protects the transmission components from dirt and rocks. The molded motor plate includes finned cooling channels where the motor mounts to the motor plate. The cooling channels work in conjunction with the internal Titan 12T motor fan to pull air through the motor for superior cooling.

    Heavy-Duty Yokes with Telescopic Driveshafts

    The Slash features heavy-duty drive yokes which are designed to provide maximum durability to withstand extreme power. The slider driveshafts are extremely durable, and they allow greater articulation for increased suspension travel.

    Included Optional Pinion Gear

    The Slash reaches its blistering 30+mph top speed on-road using the optional 23-tooth pinion gear (included) and a 7-cell 8.4V battery pack (sold separately). Out of the box, the installed 19-tooth pinion gear is just right for all-around, on- or off-road action.

    Hex Hardware

    Pro-quality, high-grade, metric hex-drive hardware is used throughout for extra strength, and easy maintenance and repair. The black-oxide rust-resistant finish provides a high tech look and feel.

    Heavy-Duty Hub Carriers & Steering Blocks

    The Slash features heavy-duty ball bearing front steering blocks and rear hub carriers. They utilize large 5x11mm ball bearings for long-term precision performance, smooth operation, and increased durability.

    Rubber-Sealed Ball Bearings

    Precision rubber-sealed bearings offer the ultimate in super low-friction performance and maximum protection in dusty environments. They are used in all exposed locations on the truck and are virtually maintenance free.

    Oil-Filled Ultra Shocks™

    The Slash's oil-filled Ultra Shocks utilize X-ring technology for a perfect seal and super-smooth performance. They are fully tunable with a wide range of oils, springs, and pistons. Features include pressure bladders for air/oil separation and spring clips to precisely change the ride height and spring pre-load. They can be renewed in minutes with our inexpensive rebuild kits.

    Progressive Rate Powder Coated White Springs

    The race-tuned progressive rate springs soak up the small bumps as a softer spring would, but when the conditions get rough and the jumps get big, the progressive rate springs step up to the challenge by getting firmer as the suspension is compressed. The long-lasting, white powder coated finish sets the Slash apart from the pack.

    Bellcrank Steering

    High-performance bellcrank steering system minimizes bump steer to increase cornering stability.

    Race Replica ProGraphix® Painted Bodies

    No need for a paint or sticker session; Slash rolls out of the box ready for action with a factory-finished and mounted ProGraphix body and decals already applied for you, so its Ready-to-Race®. Traxxas Slash Prographix bodies are available in race replica versions: Mark Jenkins Edition (Traxxas® #25), Rob MacCacharen Edition (Traxxas® #21), Chad Hord Edition (BOSS Snowplow #9), & Robby Gordon Edition (SPEED Energy #7).

    Traxxas Slash Pro 2WD Features

    • ProGraphix® multi-colored painted body is available in four officially licensed (paint and graphics) race replica versions: Mark Jenkins (Traxxas® #25), Chad Hord Edition (BOSS Snowplow #9), Robby Gordon (SPEED Energy #7) and Rob MacCachren (Traxxas #21)
    • Scale dimensions and looks of actual short course off-road race trucks
    • The Slash reaches speeds in excess of 30mph using the included optional 23-tooth pinion gear*
    • Powerful Titan® 12T 550 modified motor with internal cooling fan
    • Race in dirt, mud, water, and snow thanks to Traxxas' innovative water-sealed electronics
    • TQ 2.4GHz transmitter
    • XL-5 Waterproof Electronic Speed Control
      • Innovative watersealed design
      • High current handling
      • Forward/reverse/brake
      • Smooth high-frequency control
      • EZ-Set® push-button setup
      • Thermal shutdown protection
      • LiPo, NiCad, and NiMH compatible with two-stage low-voltage detection
      • Integrated on-off button
      • Three easy-to-program drive profiles
      • High efficiency MOSFET transistors
      • Equipped with Traxxas High-Current Connectors (patented)
      • Backed by the Traxxas Lifetime Electronics Warranty
    • Traxxas High-Current Connector (patented)
    • Digital high-torque waterproof steering servo
      • 125 oz-in of torque and 0.16-second speed
    • O-ring sealed watertight receiver box keeps the micro receiver dry
    • Speed control and receiver are securely fastened to chassis
    • Long-wheelbase fiber-composite monocoque chassis
      • 13.2 inch wheelbase
      • Over 3.5 inches of ground clearance
    • Easy access battery compartment
    • Adjustable battery hold down accepts 6- and 7-cell flat packs and 7-cell hump packs
    • Chassis nerf bars absorb impact and support the body
    • Scale front and rear tube-style bumpers
    • Body mounts incorporate reinforced washers for additional body support
    • Efficient Magnum 272™ metal-gear transmission with ball bearings
    • Sealed gearbox protects the transmission with beefed up motor guard for extra protection
    • Revo®-Spec Torque-Control™ slipper clutch system
    • External gear cover with easy slipper access
    • Reliable composite planetary gear differential with a steel ring gear
    • Heavy-duty telescoping U-joint driveshafts and yokes
    • Adjustable steel Jato®-Style turnbuckles and captured rod ends
    • Captured rod ends won't pop off for superior durability
    • Precision hex hardware throughout
    • Efficient rubber-sealed ball bearings
    • Fully adjustable Ultra Shocks™ with X-ring technology
    • Progressive rate white powder coated shock springs feature a race-tuned responsive spring rate
    • Licensed BFGoodrich® Mud-Terrain™ T/A® Tires
    • The tires include performance foam inserts and they come pre-glued on satin-finish 2.2" Slash wheels
    • Slash is backed by unparalleled Traxxas support and parts availability

    Traxxas Slash Pro 2WD Specifications

    • Length: 22.36 inches (568mm)
    • Front Track: 11.65 inches (296mm)
    • Rear Track: 11.65 inches (296mm)
    • Weight: 76.2oz (2.16kg)
    • Height (overall): 8.425 inches (214mm)
    • Wheelbase: 13.2 inches (335mm)
    • Front Shock Length: Long
    • Rear Shock Length: XXLong
    • Front Tires: Traxxas SCT 2.2"
    • Rear Tires: Traxxas SCT 2.2"
    • Front Wheels: 2.2" Satin-Finish
    • Rear Wheels: 2.2" Satin-Finish
    • Speed Control Type: Waterproof XL-5 ESC
    • Motor (electric): Titan® 12T 550 (12-turn)
    • Gear Ratio (internal): 2.72 (final drive: 12.58)
    • Differential Type: Steel Composite Planetary
    • Gear Pitch: 48-Pitch
    • Transmission: Metal Gear Magnum 272™
    • Steering: Bellcrank
    • Chassis Type: Modified Tub
    • Chassis Material: Composite Nylon
    • Center Ground Clearance: 3.5 inches (89mm)
    • Top Speed: 30+mph*
    • Skill Level: 1
    • Radio System: TQ™ 2.4GHz (2-channel)
    • Included Batteries: Traxxas Power Cell Battery (NiMH, 7-C Stick)
    • Required Batteries: 4 "AA" (transmitter)

    XL-5 Waterproof ESC Specifications

    • Input voltage: 4-8 Cells (4.8 to 9.6 volts) 2-cells (2S) LiPo (7.4 volts)
    • Case Size: 1.23"W x 2.18"D x 0.61" H
    • Weight: 2.44 Ounce
    • Motor Limit: 15-turns** (540 Size) 12-turns** (550 Size)
    • On Resistance Forward: 0.007 Ohms
    • On Resistance Reverse: 0.014 Ohms
    • Peak Current - Forward: 100A
    • Peak Current - Reverse: 60A
    • Braking Current: 60A
    • Continuous Current: 14A
    • BEC Voltage: 6.0 VDC
    • BEC Current: 1A
    • Power Wire: 14 Gauge / 5"
    • Input Harness Wire: 26 Gauge / 9"
    • Transistor Type: MOSFET
    • PWM Frequency: 1600 Hz
    • Low Voltage Detection (LVD): 2-Stage indicators, switchable (on or off)
    • Thermal Protection: Thermal shutdown
    • Profile selection:
      • Sport Mode: 100% FWD, 100% brakes, 100% REV
      • Race Mode: 100% FWD, 100% brakes, no REV
      • Training Mode: 50% FWD, 100% brakes, 50% REV
    • Single-button setup: Yes, Traxxas EZ-Set®

    Price: $269.99 Special Price: $249.95

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[Traxxas T-Maxx 3.3 2.4G RTR w/Docking Base]]> http://www.hobbypeople.net/index.php/traxxas-t-maxx-3-3-2-4g-rtr-w-docking-base.html

    Traxxas T-Maxx 3.3 w/TQi & Docking Base

    1:10 Scale RTR 4WD Nitro Monster Truck

    This is a Traxxas T-Maxx 3.3 w/TQi & Docking Base 1:10 Scale RTR 4WD Nitro Monster Truck. 4x4 monster truck fun starts with T-Maxx. When T-Maxx launched onto the scene a whole new world of R/C driving possibilities emerged. T-Maxx has become the world's best-selling Ready-To-Race nitro monster truck by climbing, jumping and ripping through terrain that others simply wouldn't dare to attempt. Hardcore nitro monster crushing continues to evolve and so does T-Maxx. Introducing the new T-Maxx 3.3. This brutal new Maxx responds to the call with a huge new stance, a tougher backbone and wicked, tire-searing performance. T-Maxx brings it all together and unlocks a whole new level of­ monster thrashing­ potential. Go ­faster, jump higher, and let your creativity find new forms of torturous off-road pounding. The new T-Maxx is stronger, bigger, and meaner right down to its monster core.

    T-Maxx 3.3 is equipped with the world's most advanced Ready-To-Race radio system. The all-new Traxxas TQi radio system with Docking Base turns your iPhone or iPod touch into a powerful tuning tool. The device display combines with the Traxxas Link App to deliver an intuitive, high-definition, full-color graphical user interface that optimizes your radio system for ultimate vehicle control. Automatic model recognition instantly recalls your settings for up to 30 Traxxas Link-enabled models - just switch on and drive. This powerful App gives you complete control over the operation and tuning of T-Maxx 3.3 with an intuitive, high definition graphical user interface. Once you have created the perfect control settings for your model, you can save them as a profile that you can restore later, use on another model, or share with friends. Traxxas Link telemetry sensors transmit real-time data including speed, RPM, temperature and battery voltage with stunning visuals. TQi Docking Base is compatible with iPhone 3G/3GS/4/4S and 2nd/3rd/4th generation iPod touch.

    Maxx Sized Stance:

    The new T-Maxx 3.3 is the biggest Maxx ever. New, giant Maxx tires deliver massive grip off-road and at 6.3" tall, they add increased ground clearance to gobble up deep ruts and overcome huge boulders (be sure to check out the videos!). In the city, urban obstacles such as curbs and stairs beckon for an all-out Maxx assault. Maxx tires come pre-glued to 3.8" Mirror-Chrome Hurricane wheels. Traxxas engineers equipped the new T-Maxx 3.3 with an extended wheelbase (30mm longer) for maximum stability. T-Maxx is able to put more power the ground for even more acceleration and amazing directional control. There's no skimping when it comes to the chassis. It's formed from 4mm thick 6061-T6 aluminum and then anodized in brilliant blue. Meaty new chassis braces and an all-new skid plate add rock-solid rigidity.

    More Power:

    The TRX 3.3 Racing Engine is famous for its broad, linear output that makes Extreme Horsepower available practically anywhere in the rpm range. Hammer the throttle at any speed and the T-Maxx completely shreds the ground underneath. Brutal bottom-end torque rips massive wheel-standing launches that swell to top speeds soaring past 45mph! The new extra-large dual-stage Traxxas air filter allows increased air flow to the TRX 3.3 Racing Engine, breathing in even more horsepower and torque. Larger filtering capacity also delivers consistent tuning during long running sessions and between maintenance intervals. At the opposite end, the Resonator dual-chamber Maxx pipe provides an average peak torque increase of 16% over the standard Maxx pipe, and a 10% increase in total power across the whole range. Full mirror polish adds that final touch.

    Revo-Spec Driveline:

    Revo DNA blends high-tech engineering with brute strength. The new T-Maxx 3.3 focuses on essential performance so it's equipped with a forward-only, auto-shifting, two-speed transmission. The quick-spinning, low-mass design contributes to the responsive acceleration and performance. Extra-wide gears and smart use of steel components come together for the strength needed to handle Extreme TRX 3.3 power and torque. Revo Spec center driveshafts between the transmission and differentials are overbuilt to handle the inevitable driveline impacts that occur after jumps and during punishing off-road driving.

    New Features:

    • TQi 2.4GHz Transmitter with Docking Base and 5-Channel Receiver

    • Factory Installed Telemetry Sensors

    • Extended Chassis, Heavy-Duty Chassis Braces and Transmission Skid Plate

    • Polished Resonator Two-Chamber Aluminum Pipe

    • Large High-Volume Dual-Stage Air Filter

    • Tunable, Sealed Revo-Spec Front and Rear Differentials

    • High-Torque Digital Steering Servo

    • Heavy-Duty Servo Saver and Bellcrank Steering System

    • Aggressive 6.3" Maxx-sized All-Terrain Tires

    • Mirror-Chrome 3.8" Hurricane Wheels

    • Revo-Spec Two-Speed Transmission and Center Driveline

    • Supersized Maxx ProGrahix Body

    Specifications:

    • Length (Including Wheelie Bar): 21.213 Inches (539mm)

    • Front Track: 16.5 Inches (417mm)

    • Rear Track: 16.5 Inches (417mm)

    • Center Ground Clearance: 4.2" (106mm)

    • Height (Overall) 10.9 Inches (277mm)

    • Wheelbase: 13.2 Inches (335mm)

    • Shock Length (Front and Rear): XXLong

    • Weight (RTR w/o Fuel): 4.536kg (165oz)

    • Tires (Front and Rear): 6.3" x 3.5" x 3.8"

    • Wheels (Front and Rear): Chrome Hurrricane 3.2" 5-Spoke

    • Wheel Diameter 3.8 Inches (97mm)

    • Transmission: Wide-Ratio, Two-Speed, Forward-Only

    • Gear Ratio (1st Gear): 24.8:1

    • Gear Ratio (2nd Gear): 15.8:1

    • Differential Type: Hardened Steel, Bevel Gear, Sealed, Limited Slip

    • Drive System: Shaft-Driven 4WD

    • Radio System: Traxxas TQi 2.4GHz 4-Channel Radio System with Docking Base

    • Telemetry: Equipped with Speed, RPM and Engine Temperature

    • Engine: TRX 3.3

    • Starter: EZ-Start

    • Chassis Type: Extended Chassis 4mm 6061-T6 Aluminum

    • Brake Type: Vented Disc

    • Fuel Tank Capacity: 125cc

    • Top Speed 45+ MPH

    • Skill Level: 4

    What's Included:

    • Fully Assembled T-Maxx 3.3, Ready-to-Race

    • TQ 2.4GHz 4-Channel Radio System with Docking Base

    • 5-Channel Receiver with Telemetry Sensors

    • TRX 3.3 Racing Engine

    • ProGraphix Body*

    • EZ-Start Power Cell and Charger

    • Fuel Bottle, Extra Glow Plug and Air Filter

    • Precision Tool Set

    • Operating Instructions

    Items Required, But Not Included:

    • Nitro Fuel (Traxxas Top Fuel or Similar)

    • 8 'AA' Alkaline Batteries for Transmitter and Receiver

    • After-Run Oil

    • Small Flat Blade Screwdriver for Engine Tuning

    *Available in four different body colors. Unable to guarantee specific body color unless purchased in person in one of our retail stores.

    Price: $499.99 Special Price: $459.99

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[UDI-RC Demon Bug Quad w/2.4Ghz Radio]]> http://www.hobbypeople.net/index.php/udi-rc-bug-quad-w-2-4ghz-radio.html

    UDI-R/C U830 Demon Bug Quadcopter

    w/2.4GHz Radio

    This is a UDI-R/C U830 Demon Bug Quad w/2.4GHz Radio. The Demon Bug is a micro-sized quadcopter that's perfect for flying in small indoor spaces. It features full 4-channel 6-axis control with gyro stabilization for stable flight, yet it can perform flips, spins and more. The Demon Bug includes a 2.4GHz radio, a 1S 250mAh LiPo battery and a USB charger. Just add batteries for the controller and you're ready to fly. The Demon Bug is loads of fun! Age 14+

    Features:

    • Durable Sleek Design

    • 4-Channel 6-Axis with Gyro Stabilization and Gravity Sensor for Stable Flight

    • Perform 360-Degree Flips, Stunts and Spins

    • Includes Removable Safety Cage

    What's Included:

    • U830 Demon Bug Quadcopter

    • 2.4GHz Radio

    • 1S 250mAh LiPo Battery

    • USB Charger

    Items Required, But Not Included:

    • 3 'AAA' Batteries for Controller

    Price: $49.99 Special Price: $39.99

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[UDI-RC Super UFO RTF Quad Copter w/camera - Big Size, 4 Ch]]> http://www.hobbypeople.net/index.php/udi-rc-super-ufo-rtf-quad-copter-w-camera-big-size-4-chann.html

    UDI-RC Super UFO RTF Quad Copter

    Includes Camera - Big Size, 4 Ch

    Bigger, Smoother, and more Stable. And, it includes a camera for stills and video! The perfect Quad Copter for easy-to-use, ready-to-fly camera-action fun! This new large-sized quad from UDI has superior performance making it a great camera platform. You'll be able to take stills and digital video in the air, controlled by UDI's latest larger-sized transmitter! And, the larger size of this quad makes it easy to see and position! Its the smoothest, easiest to fly RTF Quad-Copter we've flown! And, it does flips too!

    Features

    • Super Performance Quadcopter
    • Six Axis Gyro
    • Left/Right Throttle Mode Change
    • Built-in Video Camera

    Includes

    • Super UFO RTF Quad Copter - Big Size - 21-1/2'' square frame
    • 2.4 GHz Radio
    • 7.4V 850 mAH LiPo Battery w/Charger
    • Spare set of blades
    • Built-in Video Camera

    Price: $179.99 Special Price: $139.99

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[UDI-RC UDI Flyer 2.4GHz 370mm Rotor Dia.]]> http://www.hobbypeople.net/index.php/udi-rc-u16-udi-flyer-2-4ghz-370mm-rotor-dia.html

    UDI R/C U16 UDI Flyer

    Ready-to-Fly 2.4GHz Dual-Rotor Helicopter

    This is a UDI R/C U16 UDI Flyer Ready-to-Fly 2.4GHz Dual-Rotor Helicopter. The U16 Dual-Rotor Helicopter features a strong lightweight metal frame, so it's durable and able to take the abuse that comes along with learning to fly. It's dual-rotor design and on-board gyro make the U16 stable and easy to control. Hover, fly forward and backward and turn right and left with ease. The 2.4GHz transmitter means you'll have interference-free control and it's 600mAh LiPo battery will give you flight times around 8 to 10 minutes. Included is a charger and a set of replacement main rotor blades and a replacement tail rotor blade.

    Features:

    • Dual Rotors and Gyro for Stable Flight

    • Strong, Yet Lightweight Metal Frame with ABS Canopy

    • 3-Channel Control

    • 2.4GHz Transmitter with LCD Screen

    Specifications:

    • Main Rotor Diameter: 14.56 Inches (370mm)

    • Length: 18.5 Inches (470mm)

    • Height: 7.8 Inches (198mm)

    • Battery: 1S 3.7V 600mAh LiPo

    • Flight Time: 8 to 10 Minutes

    What's Included: 

    • Factory-Assembled Dual Rotor Helicopter

    • 2.4GHz Transmitter

    • Charger

    • Replacement Rotor Blades

    • User's Guide

    Items Required, But Not Included:

    • 4 'AA' Alkaline Batteries for Transmitter

    Price: $69.99 Special Price: $49.99

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[UDI-RC UFO Mini Quad Copter – 2.4GHz Radio, 55mm Rotors]]> http://www.hobbypeople.net/index.php/ufo-mini-quad-copter-2-4ghz-radio-55mm-rotors.html

    UDI R/C UFO Mini Quad Copter

    Ready-to-Fly w/2.4GHz Radio

    This is a UDI R/C UFO Mini Quad Copter Ready-to-Fly w/2.4GHz Radio. Have all out fun with the UFO Mini Quad Copter! This ready-to-fly Quad includes everything you need to get into the air. The UFO comes with a 2.4GHz radio, LiPo battery, charger and a set of replacement rotor blades. Made with a durable plastic, the UFO surrounds each rotor blade and motor to protect it from crashes. And when those mishaps occur, we've got you covered with replacement parts (sold seperately). The UFO Mini Quad is tons of fun! Get yours Today!

    Features:

    • Quad Rotors with 6-Axis Stabilization Makes Flying Stable and Easy

    • Durable Construction

    • Motors and Propellers are Surrounded to Protect Them From Crash Damage

    • Perform Flips

    • Two Flight Modes - Beginner and Advanced

    Specifications:

    • Rotor Diameter: 2.16 Inches (55mm)

    • Length: 6.5 Inches (165mm)

    • Width: 6.5 Inches (165mm)

    • Battery: 1S 3.7V 240mAh LiPo

    • Flight Time: 8 to 10 Minutes

    What's Included: 

    • Factory-Assembled UFO Mini Quad Copter

    • 2.4GHz Transmitter

    • Charger

    • Replacement Rotor Blades

    • User's Guide

    Items Required, But Not Included:

    • 4 'AA' Alkaline Batteries for Transmitter

    Price: $69.99 Special Price: $59.99

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[VQMDL P-51B Mustang 46 ARF Tuskegee Airplane]]> http://www.hobbypeople.net/index.php/vqmdl-p-51b-mustang-46-arf-tuskegee-airplane.html

    VQ Models P-51B Mustang "Tuskegee" ARF

    46 Size WWII All-Wood Airframe Scale R/C Airplane

    Historically Significant, Beautifully Modeled.

    The P-51 Mustang is one of the most famous US fighters of WWII. The P-51B Mustang was the first Merlin-engine version and appeared in 1943. The Merlin-powered Mustangs were exactly what the Allied bombers in Europe desperately needed, and they became famous for their long range and potent high-altitude escort capable.

    This Tuskegee inspired model of the P-51B/C model is a great flying and great looking model. The Red-Tail color scheme is captured here in this VQ ARF. You’ll find the airplane easy to fly and equally easy to finish with its standard ARF assembly and construction. This model is factory built and finished including hardware and even a painted pilot. The model includes a fixed landing gear and optional retractable landing gear is available.

    VQ recognizes today’s R/C pilot wants to fly their aircraft with their favorite type of power system. This model is designed to accept two stroke, four stroke, and with some modification can be flown with an electric power system. Power it any way you want!

    Features:

    • Factory Laser Cut, Jig-Built, All Wood Construction

    • Factory Covered and Finished

    • Installed Canopy

    • Installed Pilot

    • Fiberglass Cowling

    • Compatible with Glow and Electric Power System

    • Complete Hardware Package

    Specifications:

    • Wingspan: 1478mm - 58.2in

    • Wing Area: 40.65sq.dm - 630sq.in.

    • Wing Loading: 78.11g/dm.sq. - 25.6oz/sq.in. (Will Vary with Equipment Used)

    • Length: 1190mm - 46.8in

    • RTF Minimum Weight: 3.18Kg - 7lbs (Will Vary with Equipment Used)

    • Radio: 5 channels - 5 (4 if EP) standard servos

    • Engine: 46 Two Stroke, 70 Four Stroke (Sold Separately)

    • Motor: G-46 HP Motor, 5 cell 4500mAh, 13x8 propeller (Sold Separately)

    • Functions: Ailerons/Elevator/Rudder/Throttle

    Power:

    • Four Stroke: Magnum 70 RFS (with 13x6 Propeller) or:

    • Two Stroke: Magnum 46XLS (with 11x6 Propeller) or:

    • Electric: HP-MTR G-46 Power System (Motor, ESC, and Battery) with 13x8 Propeller

    Recommended Items:

    • 5 Channel Minimum Radio (This airplane features separate aileron servos) Airtronics Aquila 6 is Recommended.

    • 5 Standard Servos for Glow, 4 Standard Servos for Electric. We recommend Airtronics 94835 Servos. If using a 5 channel radio, Y-harnesses will be required. Optional Electric Retracts: VQARE03

    *Note: This is an ARF and does require assembly. Standard hobby tools and glue will be required. Recommended items are not included and sold separately.

    Price: $149.99 Special Price: $119.99

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000
    <![CDATA[XTM Rail 1/8 Buggy 4WD 2.4G Brushless Off-Road RTR]]> http://www.hobbypeople.net/index.php/xtm-rail-1-8-buggy-4wd-2-4g-brushless-off-road-rtr.html

    XTM Racing Rail 1:8 RTR

    4WD 2.4GHz Brushless Off-Road Buggy

    This is the XTM Racing Rail 1:8th-Scale Ready-to-Run 4WD Brushless Off-Road Buggy with an Airtronics MX-Sport 2.4G Pistol Grip radio control system. The Rail is an off-road buggy built with the characteristics of a full-size sand rail. The Rail's design allows it to be driven in various terrain from dirt to gravel to sand!

    Launching the Rail to ballistic speeds are an industrial-grade brushless Electronic Speed Controller with a massive cooling fan and a powerful brushless motor with heat-sink and dual cooling fans. This combination of power and cooling has solved the issue of thermal shutdowns to allow you to enjoy the Rail each and every run, whether using a simple 6-Cell NiMH battery pack, or a 4S Li-Po battery pack.

    Feel confident that all the internal equipment is well-protected with the custom aluminum roll cage and side frames which are secured together to provide a rigid and stable chassis. Supporting the Rail are threaded- aluminum coil-over oil-filled shocks at each corner which soak up the terrain with ease for a smooth ride. With the adjustable steel gear differentials, adjustable suspension geometry and optional sand paddle tires (P/N 148722), the Rail is sure to deliver performance and stability anywhere you take it!

    Reliability was the aim of the XTM engineering team. The electronics are cooled with 3 cooling fans and heat sinks to keep them from overheating and failing. Big threaded aluminum shocks & adjustable suspension allow the Rail to take a beating. Plus, the included radio isn't your run-of-the-mill RTR transmitter, but the MX-Sport 2.4G computer radio system from Airtronics. This radio features not only 2.4G technology, but 10-model memory, ABS braking, battery-less memory retention, and much more. Simply put, the included radio could become the radio you use with all of your R/C cars and boats. 

    Just hook up a charged battery (not included) with 4mm connectors and push the Rail through high-speed turns and race it at 45+ mph!

    General Features:

    • Factory-Assembled with Factory-Printed Body

    • Uses 6-12 Cell NiMH Batteries or 2-4 Cell LiPo Batteries (Not Included)

    • High-Current Brushless Electronic Speed Control

    • High-Powered 1:8th Scale Brushless Motor

    • Program Card for Customized Electronic Speed Controller Settings

    • Motor Heat-Sink and ESC Cooling Fans

    • Full Set of Sealed Ball Bearings for Drive-Line

    • High-Torque Metal-Geared Steering Servo

    • Threaded Aluminum Shocks with 3.5mm Shock Shafts

    • Custom Aluminum Roll Cage Protects Inner Components

    • Adjustable Toe-in and Camber, Front and Rear

    • 4mm Aluminum Shock Towers

    • Heavy-Duty Drive-Line with Chrome-Plated Front CVDs

    • Adjustable Bi-Level High-Downforce Wing

    • Aluminum Side Frames Integrate with Chassis and Roll Cage

    • Adjustable Differentials with the use of After-Market Silicone Oils

    • All-Terrain Tires Mounted on Black Wheels with Metal Rings

    • Optional Parts Available for Increased Performance and Handling

    Power System Features:

    • 1:8th Scale 2370kV Brushless Electric Motor

    • Shaft Diameter: 5mm

    • 120 Amp Programmable ESC (Includes Programming Card)

    • Nominal Input Voltage: 7.2-14.8V (6-12C NiCd/NiMH or 2-4S LiPo)

    • BEC: Switch Mode 3A/6V

    Specifications:

    • Weight (Without Batteries): 3.56kg (7.85lbs)

    • Length: 530mm (20.82")

    • Width F/R: Front 320mm / Rear 315mm (Front 12.59" / Rear 12.4")

    • Height (Measured to Top of Roll Cage with Settled Suspension): 180mm (7.08")

    • Wheelbase (Adjustable): 345mm ~ 350mm (13.58" ~ 13.77")

    Items Required But Not Included:

    • Single Battery Setup - One 6C NiMH Battery Pack (4200mAh or greater) or One 2-4S (35C) LiPo Battery Pack of desired capacity

    • Dual Battery Setup - Two 6C NiMH Battery Packs (4200mAh or greater) or Two 2S (35C) LiPo Battery Packs of desired capacity. Also requires battery jumper (P/N 145795)

    • 8-Pack 'AA' Alkaline Batteries for Transmitter

    • AC or AC/DC Charger for NiCd/NiMH and/or LiPo Batteries

    *When driving in sand, using the optional sand paddle tires (P/N 148722) allow the Rail to have amazing stability and control without getting stuck.

    Price: $549.99 Special Price: $479.99

    ]]>
    Mon, 14 Jul 2014 16:18:23 +0000